Standards ASTM / ASME B409 / SB409 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME B575, B333, B435 / SB575, SB333, SB435 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
INCONEL 22 is extremely resistant to water and general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, tough and versatile even at high temperatures. A nickel base with 22% chromium, Inconel 22 is completely austenitic. This means it is non-magnetic and will not harden with heat treatment. Nickel also helps protect the alloy from corrosion by halides such as chloride and fluoride when subjected to extreme heat. In addition to nickel and chromium, Inconel 22 contains 14% molybdenum and 3% tungsten. These two metals make the alloy resistant to wet reducing media such as iron, copper salts and nitric acid. Combined with chromium's resistance to wet oxidizing media such as iron salts, copper salts and nitric acid, this makes Inconel 22 particularly suitable for use in highly corrosive environments where safety is paramount. American standard designation: UNS N06022, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B335, ASTM B622, ASTM B626, ASTM B366, ASTM B574, ASTM B622, ASTM B619, ASTM B775, ASTM B462, ASTM B564, ASTM B472, ASTM B775, ASTM B829. German standard designation: W.Nr. 2.4602, Specifications: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754. Japanese standard designation: JIS NW6022, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH3030, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012. We can provide the following the form:Inconel22 alloy coil; Inconel22 alloy strip;Inconel22 alloy plate; Inconel22 alloy sheets; Inconel22 alloy tube; Inconel22 alloy pipe; Inconel22 alloy flat; Inconel22 alloy bar GB:GH3030;JIS:NW6022;UNS:N06022;W.Nr:2.4602 Pollution control (flue gas desulfurization), waste treatment, power generation, pulp and paper processing, marine applications, and chemical and petrochemical processing.
Applications Constructions. Pipes and tubes. Truck frames. Automotive Doors and shelving. Railroad tracks. Railroad car parts. Thickness (mm) 1.20 to 25.4 Width (mm) 3000 max Sheet Length As per customer requirement Coil Weight 30 MT max Grade O, D, DD, EDD, IF, FE 410, SS400, Pipe Grade JISG 3132 SPHT, SAE 1006, SAE 1008 Specifications IS 2062, IS 1079, IS 10748, IS 5986 & Equivalent International Standards. ASTM A 36
Metal Sheet Specifications Overall Thickness: At least. Gauge Thickness: At least. No more than. ... Overall Width / OD: At least. Overall Length: At least. Tensile Strength (UTS, Break): At least. No more than. ... Yield Strength (YS): At least. No more than. ... Elongation: At least. No more than. ... Tensile Modulus (E): At least. No more than.
Standard stainless steel sheets, in Range of thickness of 0.5mm to 5mm.Which is use in various Industrial verticals and applications for end use.We are also doing deal in HighNickelalloy, super Duplex Steel, Aluminium Alloy Steeleetc.We offer Range of grades of Stainless Steel Sheets ASTM / ASME240,202,304,304L,304H,309S,309H,310S,310H,316,316H,316L 316 TI,317,317L,321,321H,347,347H,409,410,410S,430 Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are constructed with sheet metal. RANGE OF� SHEETS� :� � � 0.5� MM To 5� MM + Thickness in Various Size in Sheets & Coil etc.� Stainless Steel� Sheets � :� ASTM / ASME SA 240 202, 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430 Finish� � � :� � � 2B, 2D, HR, CR, BA (No. 8 & No. 4), Satin (Met with Plastic Coated). Hardness� � � :� � Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. Form� � :� � � Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. Test Certificate� � :� � MTC, IBR TO. Lab.TC from Govt. App. Lab. with Third Party Inspection. We are Supplying Stainless steel Sheets From: Sail ,Essar ,Jindal ,Tata ,Bhushan,Indian. Standard Specification: ASTM A240 / ASME SA240 Available Size in Range : 1000 mm x 2000mm, 1220mm x 2440mm, 4\' x 8\', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Steel Sheets: Product Description : Hot Rolled coils, sheets, HRPO, HSRPO Thickness : 1.2 - 25.4mm Width : 900-2100mm Finish : Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Line Pipe Grades, Chequered Plates (Diamond and Tear Drop) Etc Product origin : India, China, Thailand, Malaysia, Turkey, Ukraine, Etc. Minimum Order Size And Packgaing Details : Any. Packaging As Per Customer Requirements. Sea-worthy.
Specification 1.Hot work tool steel. 2.Better toughness than conventional h13. 3.Fine grain size with high toughness. 4.High strength at elevated temperature. Application 1.Aluminium, magnesium.Casting dies. 2.Plastic thin wall mold. 3.Pressing forge dies. Chemical composition C Si Mn P S Cr V 0.30-0.43 0.80-1.20 0.20-0.50 Â?¤0.030 Â?¤0.030 4.75-5.50 0.30-0.60 Gb Aisi/astm Din Jis 4cr5mosiv H11 1.2343 Skd6
Steel sheet, coils, strips (neutral or prepainted).
Thickness:0.2 mm- 2.0mm Width:1000mm - 1250mm Coil Weight: 4-10Mt Bundle weight: 3-5Mt Zinc coating: 60-180g/m2 Al-Zinc: AZ40-100 Coil ID: 610/508mm Sheet Size: as per your requirements Paint: 25+/-5 microns on top & 7+/-2microns on bottom 1,Smooth surface. Its corrosion resistance is 2-6 times as much as galvanized plate in various atmospheric environments; 2, Heat- resistance, anti-oxidation. It does keep the same color at the temperature 315C and could be used for a long time at the temperature 500-600C for its good heat- resistant, anti-oxidation and heat-reflected performance. So it could be used as the heat- resistant accessories, such as automobile muffler, exhaust pipe, food dryer, and tealeaves baker etc. Its water-resistance is better than coating-Zn and coating-Al plate; 3, It could be used as base plate of color coated steel plate for its well coating performance. Coil Weight: 4-10Mt Bundle weight: 3-5Mt package:export seaworthy packing
Steel sheets
1. Weather-proof paper wrapping 2. 4-way sheet metal wrapped then strapped 2. Packing on 2-way steel skid.
Steel sheets 1. Steel pipe A. Seamless steel pipe: material 20#, 45#, 16mn, specification, dia57-630mm B. High frequency weld tube: material q235a/b, specification, dia15-159mm C. Galvanized pipe: material q235a/b, specification, dia 15-80mm D. Stainless steel pipe: material 304, 316, 321, 430, specification, dia 15-159mm E. Cast iron pipe, material chilled cast iron, 18#, 22#, pig iron 2. Steel plate A. Cold rolled steel sheet coil, box sheet; specification 0.4-3.0mm, material: st12 ss400 sphc B. Hot rolled steel sheet coil: specification; 2.0-15.5mm, material, q235, 20g, 65mn C. Medium plate: specification: 8.0-100mm, material; q235, 65mn, 16mnl D. Galvanized plate: specification; 0.4-3.0mm E. Stainless steel sheet; specification; 0.3-2.0mm, material; 304, 316, 321, 430 3. Section steel A. Equal angle and unequal angle, specification: 25x25x3 30x30x3.4 40x40x4 50x50x5 63x63x6 100x63x10 125x80x12 200x125x18 B. I-beam:12-560mm C. Channel steel: 8-450mm D. Various h-beams E. Steel billet: 120, 150, 200, 300, 400 F. Light rail, heavy rail, floating rail 4. Steel wire A. Wire rope:specification;6.5/8/10mm, material, q235, q195, 65mn, h08a B. Reinforced bar: specification, dia 16-32mm, material; 20mnsi C. Round steel: specification: dia 12-300mm, material: q235, 45#, 16mn, 40cr, 35crmo
Steel sheets with TPI inspection. Lot size & weight.
Steel Sheet
Ss steel sheet 304 2b
Ss steel sheet 316L 2b