Slag Suppliers and Manufacturers

specification: Al2O3 75%min, V2O5 2%max Size: 10~50mm 90% pass Packing: 1MT jumbo bag

THE ONLY BRAND NEW COPPER SLAG IN THE PHILIPPINES. Copper slag is a by-product of copper extraction by smelting. During smelting, impurities become slag which floats on the molten metal.

Copper Slag for Sandblasting/surface cleaning in all sizes.

Silicomanganese Slag Felman Production generates a residual commercial by-product, silicomanganese slag, through the production of Ferro Silicomanganese (FeSiMn). The slag is an inert solid green material consisting primarily of aluminum, manganese, magnesium, silicon, and calcium oxides. Production The slag is generated during the production of ferro silicomanganese using electric arc furnaces. The molten slag is casted, cooled by spraying it with cold water, and then crushed to the desired size. Potential Uses Potential uses of the commercial by-product include re-melt/reproduction, industrial fill, road base, textiles manufacturing, etc. Chemical Composition Below please find the available metals totals for the chemicals that were detected as components of the slag material. The material is considered non-hazardous as shown by Toxicity characteristic leaching procedure testing conducted on the material. A qualified and licensed environmental laboratory is currently conducting a general assay of the material to determine the % w/w of the different chemical components. TCLP Testing of Slag Chemical Slag Leachate RCRA Hazardous Waste Limits mg/L mg/L Arsenic ND 5.0 Barium 0.85 100.0 Cadmium 0.0011 1.0 Chromium 0.02 5.0 Lead ND 5.0 Mercury ND 0.2 Selenium ND 1.0 Silver ND 5.0 Slag Available Metals Totals Chemical mg/kg Aluminum 88,900 Barium 5,590 Calcium 151,000 Iron 7,230 Magnesium 28,400 Manganese 85,000 Potassium 12,200J Physical Aspects of the Material The material is a hard solid stone that has irregular fracturing similar to chert or glass. The material is primarily green, gray, and black in color and is odorless. The bulk density of the material is approximately 635 +/- 100 kg/m3. Material Size: Generally, one-to-four-inch stone, but can be crushed and sized to the clients desired specifications.

Krishna Enterprises are produces as the crystallization have higher purity and hardness of copper slag. We are leading manufacturer of copper slag and supply our entire nation. We. Having Processing Plant in South india and North India Regions Near to Indian Ocean Ports. We are producing material based on research and sales on products in global market. These are according to the client demand. We are dealing in copper slag that is made by superior quality with required customized size. Why choose our Copper Slag? Our copper slag is environmentally friendly abrasive Our copper slag is low dusting material. Our copper slag is nontoxic abrasive. Our available Copper Slag size is: 0-3 mm as per Customers Required Our Copper Slag color: Black Quality: Our copper slag is high purity, durable, and super-fine granular. Our available packing size:25/40kg,1MT jumbo Bags or as per client's demand. Application: Copper slag mostly used in sand blasting gun Copper slag is used in the bronze welding (brass welding) of copper, cast iron, and malleableiron and for the fusion welding of materials of the same or closely similar composition Intended for use in bronze welding (brass welding), cast iron or malleable iron Old steel outdoor surface cleaning, rust removal, strengthening the like. As a wear-resistant Floor aggregate, it can be made of hard floor tiles for squares, garages and other non-slip floor. Used in counter weight sand, such as cement plants. After fine processing, it can apply to denim coating and spraying a variety of more sophisticated use. Copper slags is used for the copper and copper alloy filler rods Additional Information: Delivery Time: Depend on quantity Packaging Details: As per customer client's demand

Copper Slag

Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It is a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle.

As a heavy industry enterprise with considerable strength in China, QIANJIN Heavy Industry produces various slag tanks, which can be processed according to the drawings provided by customers. In addition, QIANJIN slag pot has been successfully sold to more than 50 countries and regions such as The United States, Mexico, Brazil, India, South Korea, Japan, Russia and other products industries involving cement ships through continuous improvement of process and optimization of chemical composition Forging, pressing, metallurgy, engineering machinery, bridge, water conservancy and power generation, etc., provide many varieties and specifications of high quality carbon steel alloy steel castings for the national key equipment manufacturing industry

Copper slag is a by-product produced during the smelting of copper, which is then processed into abrasive products. Typically it is composed of Ferro silicate material and oxides formed when the molten slag is quenched in cold water. This cooling process fractures the slag into coarse, angular particles making it an ideal choice in many applications. It is a low-cost expendable abrasive suited for open blast cleaning and due to its low silica content, it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. Applications of Copper Slag include abrasive blasting, building materials, landfilling, road construction, abrasive tools, cutting tools, tiles, glass, and roofing granules.

Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes

For Sale We Have Copper Slag. Delivered Fob Chile Delivery.

Metallurgical slag (iron-containing flux). Content: - FE2O3 42-48%, - SIO2 10-12% - AL2O3 4,47% - CaO 20 - 25% - MgO 5,43% Used for production: - "Portland" cement, - Fertilizers, - Brake pads, - Metal blanks and articles, - Construction, - Construction of railway roads and rails Our slag can be used as an agglomerate in the production of blast furnace ore. Iron oxide prevails in the form of FeO - which allows you to additionally obtain iron from the flux during smelting.

SMS steel slag available 200000 MTS available in India.The following chemical analysis are as follows : Cr203%=5.06 FeO%=1.87 MnO%=4.15 SiO2%=29.35 CaO%=34.1 A1203%=11.52 MgO%=11.13.

Silicon slag is a grayblack granular solid waste produced by partial oxidation and partial reduction of silicon materials at high temperatures Silicon slag mainly comes from silicon material processing processes in the metallurgy and semiconductor industries such as silicon wafer slicing ferrosilicon smelting and other processes The main components of silicon slag are SiO2 and a small amount of FeO Al2O3 CaO and other elements and oxides 1 Make cement Silica slag can be used as an additive in cement clinker to replace some materials such as plaster of paris or fly ash in cement clinker Silica slag can promote the hydration reaction of cement clinker and enhance the early strength and longterm performance of cement 2 Making glass Silica slag is an important raw material for glass manufacturing It can replace part of the raw materials such as quartz sand and sodium carbonate reduce the cost of glass production and at the same time improve the quality and weathering resistance of the glass 3 Manufacturing Ceramics After silicon slag is mixed with materials such as alumina calcium oxide and magnesium oxide highperformance refractory ceramic materials can be prepared These materials have excellent properties such as hightemperature fire resistance high strength and wear resistance and are widely used in hightemperature furnaces chemical equipment and other fields 4 Manufacturing building materials Silica slag can be used as a raw material for manufacturing building materials such as building bricks sound insulation panels and thermal insulation materials Building materials made of silicon slag have high strength wear resistance fire resistance and other properties and also have good heat and sound insulation properties 5 Other uses Silicon slag can also be used to manufacture graphite electrodes iron oxide pigments electrical insulation materials and other products In addition silica slag can also be recycled such as used to make road hardeners lowcarbon cement etc

As the important metallurgical containers, the slag pot plays an important role in steelmaking production and steel slag processing. The slag pots in Tenfaye are cast steel slag pots, which are divided into 2.13m�³, 4m�³, 5m�³, 9m�³, 12m�³, 16m�³, 18m�³, 20m�³, 24m�³ and other types of slag pots. Slag pot weight: 5-75 tons. Common material of slag pot. A comprehensive data bank containing previous experiences combined with advanced software implementing the Finite Element Analysis serves custom engineered design optimization.�  According to the requirements of the customer's drawings, appropriate wooden molds can be selected for modeling design. Huazhu CAE is used to simulate pouring before pouring. Strictly follow the wooden mold - modeling - smelting and pouring - insulation - sand removal from the pit - heat treatment - rough and fine processing - packaging and delivery process, integrated casting, strong deformation resistance, and casting high-quality slag pot.

We offer Metal Slag, we have 3,000 tons monthly.

Copper slag is a by-product of copper extraction by smelting. During smelting, impurities become slag which floats on the molten metal. Copper slag is mainly used for surface blast-cleaning. Abrasive blasting is used to clean and shape the surface of metal, stone, concrete and other materials. In this process, a stream of abrasive grains called grit are propelled toward the workpiece. Copper slag is just one of many different materials that may be used as abrasive grit. Rate of grit consumption, amount of dust generated, and surface finish quality are some of the variables affected by the choice of grit material. Internationally the described media is manufactured in compliance with ISO 11126-3[4] The blasting media manufactured from copper slag brings less harm to people and environment than sand. The product meets the most rigid health and ecological standards. SIZES AVAILABLE 0.50 MM TO 1.50 MM 0.50 MM TO 2.50 MM 0.50 MM TO 3.00 MM 0.50 MM TO 4.00 MM 0.10 MM TO 5.00 MM

Ground Granulated Blast Furnace Slag (GGBFS) is a by-product from the manufacture of Iron and a high-performance substitute to traditional cement that will rise the technical presentation of your application, improve its appearance and minimize its environmental impact. GGBS is used in combination with Portland cement to produce superior longer-lasting concrete. GGBS will improve performance in any situation, from housing to civil engineering applications. GGBFS also improves the concrete toughness, reduces preservation and repair costs, progresses workability and compression features, extensions compressive and flexural strengths, decreases cement and water consumption, advances concrete grading and also improves impermeability and water resistance. Arij Global Trading LLC is a professional Ground Granulated Blast Furnace Slag supplier. We are a global company operating in the fields of the mineral industry, trade, and logistics. Reliable and responsible entrepreneurship, combined with flexibility and innovative logistics solution, plus our motivated and skilled employees, our core proficiencies and efficient work processes, we continuously achieve an above-average value contribution. GGBFS Ground Granulated Blast Furnace Slag (GGBFS) is gained by grounding the Granulated Blast Furnace Slag into the desired fineness. This product is usually intended to be used in concrete either as an element of composite cement such as Blast furnace Cement/High Slag Blast Furnace Cement or as a straight addition to the concrete mix by the concrete producer. GBFS Granulated Blast Furnace Slag GBFS can be used like sand as an additional aggregate for building materials. Granulated Blast Furnace Slag is obtained by quickly chilling (quenching) the molten ash from the furnace with the help of water. Throughout this procedure, the slag becomes fragmented and changed into amorphous granules (glass).