Product Description Texol Ultra X SAE 20W50 API SN is a mineral oil type energy-efficient Passenger Car Motor Oil, made with high quality solvent refined base oils and with additives of proven performance. The base oils provide excellent lubricity and oxidation resistance. The engine oil provides wide temperature range operability. Applications Texol Ultra X SAE 20W50 API SN is an engine oil designed for use in modern gasoline engines, passenger cars, SUVs, vans and light trucks. USA made cars following API specifications oils widely use this type of engine oil. Features and Benefits TEXOL ULTRA X SAE 20W50 API SN Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office. High-temperature deposit protection for pistons. Sludge Control. Seal Compatibility. Fuel economy. Specifications and Approvals API SN Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
Product Description Texol Gear Oil SAE 75W90 API GL-5 is a fully synthetic Gear Oil from synthetic base stocks and advanced additives. These additives provide protection from wear, rust and oxidation. The extreme pressure additives based on Sulphur and Phosphorus chemistry resist high and shock loads. Applications Texol Gear Oil SAE 75W90 API GL-5 recommended for heavily loaded and non synchronized transmissions and hypoid in passenger cars and other automotive equipment operat-ed under high-speed, shock- load; high-speed, low-torque; and low-speed, high-torque conditions. Features and Benefits Provides long life of manual transmissions gears. Excellent anti-wear and anti-rust protection. Minimal environmental degradation as the oil is free from Lead based additives. Excellent load carrying. Specifications and Approvals API: GL-5 ZF TE-ML 07A Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
Salient Features Highly efficient 3-phase water filled motor - Easily rewindable - Dynamically balanced design - Extended life with flawless performance - Thrust bearing : Carbon + S.S. material for High thrust load capacity - 100% EC grade copper winding - Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps. - Zero maintenance - Superior performance - Sand proof operation - Highly efficient 3-phase water filled motor Product Specification Power Range : 1.0 HP to 20.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 20000 Wp Input Solar DC Voltage Range : 110 Vmp - 600 Vmp Head Range : 30 Mtr , 220 Mtr Discharge Range : 10000 LPD - 420000 LPD Type of Duty : S1 material of construction - motor Part Grade Body Lock : Spring Steel Stud Ring : M.S. (Zinc Coated) Stator Stamping : CRNGO - M45 Silicon Winding Wire : 100% EC Copper Shaft : SS-420 Rotor Stamping : CRNGO - M45 Silicon Copper Lamination : 100% EC Copper Upper Housing : SS-304 Lower Housing : SS-304 Connection Piece : SS-304 Oil Seal : NBR TB Set : Carbon + SS Base : SS-304 Drain Plug : Brass Couple Sleeve : Stainless Steel Water Bolt : Brass MATERIAL OF CONSTRUCTION PUMP Part Grade Suction : SS-304 Couple : Stainless Steel Couple Counter : SS-304 Rubber Seal : NBR Bush Seal Cover : SS-304 Bowl : SS-304 Impeller : SS-304 Key : SS-410 Bowl Bush : NBR Bush : LTB-4 Middle : SS-304 Cap : NBR Outlet : SS-304
Salient Features Highly efficient 3-Phase Water Filled Motor - 100% EC grade copper winding - Easily Rewindable - Motor Designed with Higher Cooling Effect Ensures Longer Life - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Zero maintenance Product Specification Power Range : 3.0 HP to 10.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 â?? 50 Hz Input Solar DC Power Range : 3000 Wp, 10000 Wp Input Solar DC Voltage Range : 330 Vmp , 600 Vmp Head Range : 10 Mtr , 50 Mtr Discharge Range : 126000 LPD , 425000 LPD Type of Duty : S1 Material Of Construction Part Grade Oil Seal : Nitrile butyl rubber Motor Shaft : SS - 420 Motor Body : Cast Iron / J4 Motor Bush : LTB-4 / Teflon Thrust bearing assembly : SS - 420 & Carbon Base : Cast Iron Bracket : Cast Iron Flange : Cast Iron Casing : Cast Iron Impeller : Cast Iron
V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Specifications: Mowell Electric Suction Machine made of Powder Coated MS base and Stainless Steel Top, with two Poly-carbonate Jars of 2 Liter each. It is sturdy and high quality product made with motor which last long. This is unique type of suction machine gives powerful suction with exceptionally Noiseless Operation. Capacity: 700 ± 10mm Hg regulable at 25-30 Ltrs./Min Power: 230V, 50 Hz, 4 ± 0.5 Amps, 200 watts Vacuum Gauge : 2 inch, BCPM,. 0-760mm Hg calibration Jars : Polycarbonate / Glass Jars (2Ltr.), fitted with Specially Design Self Sealing Rubber Lids Pump Type : Oil Immersed Piston Pump with 1/4 Hp Electric Motor Housing : M.S. Powder Coated Cabinet, mounted on Rubber Bush & fitted with Handle for Easy Mobility. Size/Strength: Dimensions & Weight : 19? x 12? x 29?, 19 Kg This is unique type of suction machine gives powerful suction with exceptionally Noiseless Operation. Capacity: 700 ± 10mm Hg regulable at 25-30 Ltrs./Min Power: 230V, 50 Hz, 4 ± 0.5 Amps, 200 watts Vacuum Gauge : 2 inch, BCPM,. 0-760mm Hg calibration Jars : Polycarbonate / Glass Jars (2Ltr.), fitted with Specially Design Self Sealing Rubber Lids Pump Type : Oil Immersed Piston Pump with 1/4 Hp Electric Motor Housing : M.S. Powder Coated Cabinet, mounted on Rubber Bush & fitted with Handle for Easy Mobility Dimensions & Weight : 19? x 12 x 29, 19 Kg (approximately)
Product Code: MESM 03 Specifications: Two Bottles Size/Strength: 2X1500ML This is unique type of suction machine gives powerful suction with exceptionally Noiseless Operation. Capacity: â?? 700 �± 10mm Hg regulable at 25-30 Ltrs./Min Power: 230V, 50 Hz, 4 �± 0.5 Amps, 200 watts Vacuum Gauge : 2 inch, BCPM,. 0-760mm Hg calibration Jars : Polycarbonate / Glass Jars (2 x 1.5 Ltr.), fitted with Specially Design Self Sealing Rubber Lids Pump Type : Oil Immersed Piston Pump with 1/8 Hp Electric Motor Housing : M.S. Powder Coated Cabinet, mounted on Rubber Bush & fitted with Handle for Easy Mobility Dimensions & Weight : 13 x 10? x 36, 13 Kg (approximately)
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5
D G EXIM is one of the leading suppliers of Industrial Chemicals Acetic Acid Glacial Activated Carbon Aluminium Sulphate Magnesium Sulphate Aluminium Sulphate Ammonium Chloride Ammonium Sulphate Borax Decahydrate Borax Anhydrous Boric Acid Butyl Glycol Ether Calcium Chloride Caustic Soda Flakes / Pearls Citric Acid Gum Rosin Hydrogen Peroxide 50% Sodium Metabisulphite f.g Iso Cyanuric Acid Iso Propyl Alcohol Lactic Acid Methylene Chloride Mono Ethylene Glycol Mono Propylene Glycol Nonyl Phenyl Ethoxalates â?? np9 Oleic Acid Potassium Chloride Potassium Hydroxide Flakes Potassium Nitrate Sodium Formate Sodium Gluconate Sodium Hexametaphosphate Sodium Hydroxide Pearl/Flake Sodium Metasilicate Xanthan Gum Sodium Molybdate Sodium Tripolyphosphate Tetra Potassium Pyrophosphate Tetra Sodium Pyrophosphate Triethanolamine 85% Zinc Sulphate Calcium Chloride Edta Glycerine Guar Gum Mineral Oil Light / Heavy Phosphoric Acid 85% Soda Ash Dense/Light Sodium Benzoate Sodium Bicarbonate Sodium Carboxy Methyl Cellulose (CMC)
Racing SAE 0W-20 Full Synthetic High Zinc Full-Synthetic Racing Oil Champion Racing Motor Oils are purpose-built products designed for severe racing applications. These products contain Champion's proprietary TVS(Thermal Viscosity Stabilizer), special lubricity modifiers, and a premium level of anti-wear additives which includes a high quantity of ZDDP. This robust formula is proven to meet the lubrication demands of competition engines, and create a tough film strength, which controls wear and provides more horsepower and torque in Dynamometer testing. Champion Racing Oils are suitable for use in all competition engines especially those using flat tappet and/or roller cams operating at high RPMs and requiring high-pressure valve springs. These products are offered in a popular range of multi-viscosity SAE grades and formulated to meet the demands of most of today's high-performance race engines. Features: Provides exceptional low coefficient of friction Offers film strength and viscosity stability at higher temperatures Formulated for the protection of flat tappet cams, roller cams and bearings in turbo and super-charged racing engines Increases high-temp oil pressure and compression Compatible with all racing fuels including methanol Provides upper cylinder anti-wear protection Reduces engine oil temperature Compatible with other petroleum and synthetic oils Part# 4360AN 55 Gal. Part# 4360H/6 6/1 QT. Part# 4360D 5 Gal.
Racing SAE 0W-30 Full Synthetic High Zinc Full-Synthetic Racing Oil Champion Racing Motor Oils are purpose-built products designed for severe racing applications. These products contain Champion's proprietary TVS(Thermal Viscosity Stabilizer), special lubricity modifiers, and a premium level of anti-wear additives which includes a high quantity of ZDDP. This robust formula is proven to meet the lubrication demands of competition engines, and create a tough film strength, which controls wear and provides more horsepower and torque in Dynamometer testing. Champion Racing Oils are suitable for use in all competition engines especially those using flat tappet and/or roller cams operating at high RPMs and requiring high-pressure valve springs. These products are offered in a popular range of multi-viscosity SAE grades and formulated to meet the demands of most of today's high-performance race engines. Features: Provides exceptional low coefficient of friction Offers film strength and viscosity stability at higher temperatures Formulated for the protection of flat tappet cams, roller cams and bearings in turbo and super-charged racing engines Increases high-temp oil pressure and compression Compatible with all racing fuels including methanol Provides upper cylinder anti-wear protection Reduces engine oil temperature Compatible with other petroleum and synthetic oils Part# 4361AN 55 Gal. Part# 4361H/6 6/1 QT. Part# 4361D 5 Gal.
SPEED PLUS 20W-50 Applications: Masterline PCMOs are premium motor oils created with superior quality synthetic base oils, employing advanced additive technology to enhance performance in modern petrol and diesel car engines. Performance level : API SL / CF Features & Benefits: Suitable for use in all seasons and helps in reducing oil consumption Extended oil life due to excellent oxidation and nitration resistance Perfectly balanced anti-corrosion, anti-rust and anti-wear properties Pack size = 1L,3L,3.5L,55L,210L Recommendation :To use in premium petrol & diesel operated Sedans, SUVs & Cars like Mercedes Benz, Porsche, Audi, BMW, Fiat, Ford, Chevrolet, Optra Magnum, Maruti, Hyundai, Toyota, Skoda, Honda, Mitsubishi, Nissan, Renault, Tata, Mahindra, Volkswagen, Volvo etc.
Applications: Turbo Special 15W-40 API CI-4 is a premium quality synthetic blend engine oil designed to provide excellent performance on modern low emission heavy duty diesel engines. Performance Level : API CI-4, CH-4/SL, SJ, Mack EO-M+, ACEA E7-08, MB 228.2/3, MTU Type 2, MAN M3275, Renault RLD-2, Volvo VDS-3, Cummins CES 20076-78, JASO DH-1 Features & Benefits: Excellent performance to keep engine clean & protected by acids protection and deposit control Long Lasting protection across variety of roads and weather conditions. Unique additive technology with premium base stocks protects oil thickening, piston deposits, wear and corrosion Provides superior soot handling properties & cold start abilities TURBO SPECIAL CI-4 | SAE 15W-40 (SYNTHETIC BLEND) Pack size = 1L,3L,3.5L,4L5L,6.5L,7.5L,8.5L,10L,15L,20L,55L,210L Meets or exceeds the specifications: API.CI-4, CH-4/SL. SJ, MackE0-M+. ACEA E7-08, MB 28.2/3, MTU type 2, MAN M3275, Renault RLD-2, Volvo VDS-3, Cummins CES 20076-78, JASO DH-1 Recommendation : Recommended to use in HCV�¢??S, LCV�¢??s, MUV�¢??s and vehicles with diesel engines from TATA, Ashok Leyland, Eicher, Escort, Mahindra, AMW, Volvo, MAN, Mercedes, Maruti, Hyundai, Ford, Toyota, Skoda & in vehicles requiring CH-4, C6-4, CF-4 oils. This oil is compatible with heavy duty diesel engines used in constructions, mining, agriculture, tractors & other off-road applications.
Explore the warm and aromatic qualities of Mace Oil. Mace oil is an aromatic and spicy essential oil derived from the outer covering of the nutmeg seed, known as the aril. It possesses a warm, sweet, and slightly floral scent, making it a popular ingredient in perfumery, culinary applications, and traditional remedies. In perfumery, oil has values for its unique fragrance. The warm and spicy aroma of oil lends a distinct character to various fragrance blends. This also known for its ability to enhance the taste of dishes and add a delicate sweetness to recipes. We recognize this oil has potential health benefits. It can possess antioxidant and anti-inflammatory properties, which may support overall well-being. This helps soothe the digestive system, relieve occasional stomach discomfort, and promote healthy digestion. When using oil, it is important to follow proper dilution guidelines and use it sparingly, as it can have a strong flavor and aroma. Overall, this oil is a versatile and aromatic oil with a range of potential uses. Its distinctive scent, culinary applications, and potential health benefits make it a sought-after choice for those seeking a unique and flavorful addition to their daily routine. Package Size 100 GM, 500 GM, 1 KG, 5 KG, 10 KG, 20 KG, 25 KG Product Specifications Botanical Name: Trachyspermum Plant Part Used: Seed Origin: Indian Spec Range: Thymol 45 -50% VOC: 100% Solubility: Alcohol Soluble Extraction Method: Steam Distillation Appearance: Brownish Colour Liquid Odour: Characteristic Aroma and Flavour Specific Gravity: 0.904 -0.907 Refractive Index: 1.480 - 1.510 Optical Rotation: 0 +2 Natural: Yes Food Grade: Yes FDA: Yes FSSC: Yes Kosher: Yes Halal: Yes Applications: Culinary, Aromatherapy, Traditional Medicine, Digestive Aid, Perfumery, Topical Pain Relief, Skin Care, Respiratory Health. CAUTION: It is meant only for external use. Do a patch skin test before applying it to your skin. Dilute it before topical application. Avoid direct exposure to sunlight. Pregnant women should consult a doctor before using it.
F1 4T 20W-40 API SN | Synthetic Blend 4T Engine Oil For New Generation Motorcycles Applications:F1 4T 20W-40 API SN is premium quality synthetic blend motorcycle engine oil designed with selective base oils and additives chemistry for latest 4-stroke motorcycles. Performance level: API SN, JASO MA2 Features & Benefits: Specially formulated to provide all-around engine protection Creates strong oil film for perfect protection and lubrication Facilitates faster pick- up Maximize engine wear protection Reduces piston deposits & sludge formation Meets the specifications: API SN, JASO MA2 Recommendation: Recommended to use in new generation 4-stroke gasoline engines in high performance motorcycles of all leading global manufacturers.
SYNTH PLUS 5W-30|Fully Synthetic Applications: Masterline PCMO�¢??s are premium motor oils created with superior quality synthetic base oils, employing advanced additive technology to enhance performance in modern petrol and diesel car engines. Performance level :API SN, ILSAC GF-5 Features & Benefits: Excellent deposit control by reducing sludge and varnish formation to provide a cleaner running engine Wear protection through improved oil film strength and resistance to oil breakdown under high temperatures and hard driving conditions Superior cold start protection as lower viscosities allow faster oil flow at start up Pack size = 1L,3L,3.5L,55L,210 L Recommendation :To use in premium petrol & diesel operated Sedans, SUVs & Cars like Mercedes Benz, Porsche, Audi, BMW, Fiat, Ford, Chevrolet, Optra Magnum, Maruti, Hyundai, Toyota, Skoda, Honda, Mitsubishi, Nissan, Renault, Tata, Mahindra, Volkswagen, Volvoetc
