Specification 1.One of the most often used chromium-molybdenum tool steels. 2.Contains a higher molybdenum content. 3.Better hot hardness and temper resistance. 4.High hot hardness and toughness. 5.Good resistance to softening, wear and thermal fatigue. Application 1.Applications such as gears. 2.Shear blades. 3.Mandrels punches and tooling dies. Chemical composition C Si Mn P S Cr V 0.35-0.40 0.30-0.50 0.30-0.60 Max 0.035 Max 0.035 4.7-5.20 0.40-0.70
Round bar All kinds of alloy steel subject to orders. Vacuum degassing electroslag remelting ladle furnace slwe cooling annealing treatment etc. Satndard export container
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:ASTMA36,JISG3302 Model Number:0.12-3.0mm*600-1500mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Galvanized Application:Container Plate Special Use:High-strength Steel Plate Width:600-1500mm Length:Customer's Requirement Zinc Coating:30-275g/m2 Coil Weight:3-5 Tons or as requirment Material:SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Spangle:Minimum, regular, big spangle Payment terms:T/T,L/C, Kunlun bank, MOQ:25 Mt(one 20ft FCL) COIL ID:508mm/610mm Certificate:ISO ,SGS,SAI Delivery time:Within 15-20days
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:ASTMA36,JISG3302l Model Number:0.12-3.0mm*600-1500mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Galvanized Application:Container Plate Special Use:High-strength Steel Plate Width:600-1500mm Length:Customer's Requirement Zinc Coating:30-275g/m2 Coil Weight:3-5 Tons or as requirment Material:SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Spangle:Minimum, regular, big spangle Payment terms:T/T,L/C, Kunlun bank, MOQ:25 Mt(one 20ft FCL) COIL ID:508mm/610mm Certificate:ISO ,SGS,SAI Delivery time:Within 15-20days
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:ASTMA36,JISG3302 Model Number:0.12-3.0mm*600-1500mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Galvanized Application:Container Plate Special Use:High-strength Steel Plate Width:600-1500mm Length:Customer's Requirement Zinc Coating:30-275g/m2 Coil Weight:3-5 Tons or as requirment Material:SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Spangle:Minimum, regular, big spangle Payment terms:T/T,L/C, Kunlun bank, MOQ:25 Mt(one 20ft FCL) COIL ID:508mm/610mm Certificate:ISO ,SGS,SAI Delivery time:Within 15-20days
* Iron ore is found in nature in the form of rocks, mixed with other elements. By means of various industrial processes incorporating cutting-edge technology, iron ore is processed and then sold to steel companies. The primary use of iron ore (98%) is to make steel. The remaining 2% is used in various other applications, such as: powdered iron for certain types of steels, magnets, auto parts and catalysts. radioactive iron (iron 59) for medicine and as a tracer element in biochemical and metallurgical research 5.5 -6 mm 8 mm 10 mm 12 mm 16 mm 20 mm 25 mm 32 mm 36 mm 40 mm 50 mm
Pig iron, also known as crude iron, is an intermediate product of the iron industry in the production of steel which is obtained by smelting iron ore in a blast furnace. When the metal had cooled and hardened, the smaller ingots (the "pigs") were simply broken from the runner (the "sow"), hence the name "pig iron".
Coal based Sponge-iron is a metallic product produced through direct reduction of iron ore in the solid state. As such it is also known as Direct Reduced Iron (DRI).After reduction of iron ore pellet the product resembles sponge because of pores left behind after removal of oxygen. As such it is called Sponge Iron
This by-product derives from the iron industries and its a valuable material for melting and manufacturing of ferrock for construction purposes.As a leading supplier of eco-conscious materials, we take pride in offering a diverse range of recycled materials, including cryolite, carbon anodes, carbon dust, bath material, steel scrap, fine iron scrap, rebars and more. With a strong commitment to sustainability, our materials are engineered to meet the demanding needs of industrial projects while promoting environmental responsibility.
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
iron & steel or stainless steel products.Iron steel
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.
Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.
Black annealed wire, which is made of low carbon steel or iron, is often applied for weaving, baling in home use and construction. For example, baling hay in agriculture area. Black annealed wire is mainly processed into coil wire, spool wire or big package wire. Or further straightened and cut into cut wire and U type wire. Compared with black iron wire, black annealed wire is more softer and has higher flexibility. Double twist wire Mainly size: BWG18 BWG16 Single wire mainly size: BWG18 BWG16 BWG14 BWG12 BWG20 BWG22 Popurlar packing is 1kg per coil ,than 10kg or 20kg per carton
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:steel Brand Name:AIYIA Model Number:SGCC, SGHC ,DX51D Surface Treatment:Coated Application:Gutters ,Auto parts ,Electrical Appliances,Purling, Vending Machine,Refrigerator,Ovens,For Prepainted ,Roof Sheet Special Use:Other Width:750mm to 1250mm, 750mm to 1250mm Length:As Buyer requirememt Commodity name:AIYIA Hot Dipped Galvalume Steel Coil/plate/sheet/strip(gl) Zinc Coating:30-275g/m2 Payment Term:T/T& L/C Sample time:3days Steel Grade:SGLCC, SGLCH,SGLC400, SGLC440, SGLC490, SGLC570 Certificate:ISO9001 Coil Weight:3-8MT/Coil or as your request Color:Silver
We can supply many kinds of construction machine, farm machine and components, We can produce all kind of casting steel parts, casting iron parts for construction machine, dumping truck, hot water boiler... We can produce according to your drafts
All kinds of iron alloy and steel castings We are manufacture of quality alloy iron & special steel castings since last 25 yrs. We have the entire required infrastructure to manufacture the quality castings. Our product inspection is supervised by lloyd's register, rites, ntpc. We can arrange any available inspection agency as per the requirement of the customer. We are specialists in following grades Impact & wear resistant high mn. Steels, is: 276. Wear resistant steels, is: 4771. Plain carbon steels, is: 1030, 2707 High carbon high chromium steels - d2, d3. Abrasion resistant steels, is 4896. Heat resistant steels, is: 4522. Stainless steels, ISI: 304, 316 grades. Corrosion resistant steels, is: 3444. S. G. Iron, is: 1865 Depending upon the specifications & drawings
We are selling color coated secondary steel plates. This secondary steel plate is colored and coated because it comes from home appliance factory. So it's suitable for making small products such as small cases. If you contact me, I will send you the picture. Thanks, Origin : South Korea Departure : South Korea Payment terms : L/C Lead time : 2 ~ 4 weeks Price : discuss MOQ : 20ft - 1 Container (18~20 MT)
Rebar Steel, Deformed Steel Rebar Iron Rods for Construction Concrete Rebar steel deformed steel rebar iron rods for construction concrete building Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:HRB335,HRB400 Diameter:5.5-250mm Length:6-12m Place of Origin: Thailand Model Number:Q235 Steel grade:ASTM, Q235,SAE1018,SAE1045,20#,45# etc Technique:Cold Drawn or Hot rolled available Surface:HRB400/500/ASTM/BS4449
High quality NATAI GB-102 Wire Drawing Lubricant used in Low Medium Carbon Steel Wire Drawing Product Name GB-102 Wire Drawing Lubricant Color Light yellow Basic Composition Butter, fatty acids, calcium hydroxide, calcium stearate Water Content < 3% Property Calcium soap Low fat content Pretreatment Mechanical rust removing Pickling and lime treatment Pickling with borax processing Instructions for use GB102 Wire Drawing Lubricant is widely applicable to the steel wire surface clean process after the wire drawing. If the pretreatment is mechanical to rust, the drawing time will up to 1, and pretreatment for pickling plus coating, drawing times can be increased to 6. Packaging & Delivery Packaging Details: Woven bag(with waterproof film), 25kg/bag or as customer required Delivery Detail: Shipped in 30 days after payment
