Inconel 600 Suppliers and Manufacturers

Inconel 718 alloy is a precipitation-hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength at 700 C, good toughness and corrosion resistance in high and low temperature environments. The delivery condition can be solution treated or precipitation hardened. No matter in high temperature or low temperature environment, Inconel718 alloy has excellent resistance to stress corrosion cracking and pitting corrosion. Inconel718 alloy is especially excellent in oxidation resistance at high temperature. Inconel 718 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in aerospace, energy, chemical, and marine engineering fields. The following are the common national standard designations for Inconel 718: US standard designation: UNS N07718, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5596, ASTM B637, ASTM B670, ASTM B906, ASTM B983, ASTM B655, ASTM B751, ASME SB637, ASME SB670, GE B50TF15, GE B50TF14, GE B50TF14E, GE B50A714, SEW 555. European standard designation: EN 2.4668, EN 10216-5, EN 10250-4, EN 10263-4, EN 10269, EN 10302, EN 10305-1, EN 10308, EN 10312, EN 10314, EN 12266-1, EN 13480-5, EN 13544-2, EN 14456. German standard designation: DIN NiCr19NbMo, DIN 2.4668, DIN 17742, DIN 17754. French standard designation: AFNOR NC19FeNb, AFNOR NC 19 Fe Nb. British standard designation: BS HR 51, BS HR 52, BS HR 601, BS HR 602, BS HR 605, BS HR 506. Russian standard designation: �?�?�¡�¢ �­�?678, �?�?�¡�¢ 5632-72, �?�?�¡�¢ 9940-81, �?�?�¡�¢ 14955-77, �?�?�¡�¢ 22897-86. Note: Standard designations may vary depending on the different standard organizations or countries. We can provide the following the form:Inconel718 alloy coil; Inconel718 alloy strip;Inconel718 alloy plate; Inconel718 alloy sheets; Inconel718 alloy tube; Inconel718 alloy pipe; Inconel718 alloy flat; Inconel718 alloy bar BS:HR 51;DIN:NiCr19NbMo;UNS:N07718;W.Nr:2.4668 1. Steam turbine 2. Liquid fuel rockets 3. Low temperature engineering 4. Acid environment 5. Nuclear engineering.

Inconel Alloy 725 (UNS N07725) is a nickel chromium molybdenum niobium alloy with high corrosion resistance and age hardening to very high strength. Its composition is similar to Inconel 625 alloy. Inconel 625 is an alloy widely used in various corrosive environments. Its strength can be improved by cold work hardening and has been used for small bolts. Inconel 725 alloy basically has the same corrosion resistance as Inconel 625 alloy, but Inconel 725 alloy is an alloy that is age-strengthened by a heat treatment process. Since the stress of Inconel 725 alloy is through heat treatment instead of cold working, the plasticity and toughness are still high, and it is suitable for making high-strength, high-corrosion-resistant parts. Here are the common national standard designations of Inconel 725: US standard designations: UNS N07725, AMS 5660, AMS 5832, AMS 5772, AMS 5796, AMS 5581, ASTM B805, ASTM B805, ASTM B805. European standard designations: EN 2.4668, EN 10269, EN 10272, EN 10216-5, EN 10250-4, EN 10263-4, EN 10297-2, EN 10302, EN 10312, EN 12266-1, EN 12560-6, EN 13480-3, EN 13480-5, EN 13544-2, EN 1592-4. German standard designations: DIN NiCr22Mo9Nb, DIN 2.4627, DIN 17742, DIN 17744, DIN 17752, DIN 17754, DIN 17751. Japanese standard designations: JIS NCF725, JIS G4902, JIS G4941, JIS G5502, JIS G5122. Chinese standard designations: GB/T UNS N07725, GB/T 14992, GB/T 15001, GB/T 15003, GB/T 15004, GB/T 21833. We can provide the following the form:Inconel725 alloy coil; Inconel725 alloy strip;Inconel725 alloy plate; Inconel725 alloy sheets; Inconel725 alloy tube; Inconel725 alloy pipe; Inconel725 alloy flat; Inconel725 alloy bar Used for pipe fittings, joints and bearings in acid-resistant equipment. It is also widely used in marine ship equipment; GB:00Cr21Ni57Mo8Nb5TiA1;JIS:NCF725;UNS:N07725;W.Nr 2.4668

Inconel 230 is a nickel-chromium-tungsten-molybdenum alloy that offers excellent high temperature strength, oxidation resistance (up to 2100F), nitriding resistance, and long-term stability. Alloy 230 is a solid solution strengthened material that has excellent high temperature strength and good machinability at room temperature. It is especially effective for long-term applications at 1200�°F (649�°C) or higher, and is capable of extending the life of stainless steel and nickel alloys depending on temperature. Here is the translation of the previous answer: The following are the national standard grades and specifications for Inconel 230: United States standard grade: UNS N06230 Specifications: AMS 5878: Melting stock for nickel-based high-temperature alloys. AMS 5879: 230 alloy forgings and forging stock. AMS 5968: 230 alloy bars and wire. ASTM B564: Standard specification for forged fittings, flanges, and valves and parts for high-temperature service. ASME SB-564: Same as above. European standard grade: NiCr22Mo16Al (2.4733) Specifications: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and hot finished structural hollow sections. EN 10269: Technical delivery conditions for high-temperature and corrosion-resistant steels. EN 10002-1: Method of tensile testing of metals. EN 10002-5: Method of compressive testing of metallic materials. Japanese standard grade: NCF 230 Specifications: JIS G4902: Standard specification for seamless and welded nickel alloy pipes and tubes. JIS G4903: Standard specification for seamless and welded nickel alloy pipes and tubes. Chinese standard grade: GH2302 Specifications: GB/T 14992: Standard specification for seamless and welded nickel alloy tubes and pipes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel pipes and welded steel pipes for hydraulic transmission. These specifications define the chemical composition, physical properties, processing, and testing requirements of Inconel 230 materials to ensure their quality and performance meet the standards. We can provide the following the form:Inconel230 alloy coil; Inconel230 alloy strip;Inconel230 alloy plate; Inconel230 alloy sheets; Inconel230 alloy tube; Inconel230 alloy pipe; Inconel230 alloy flat; Inconel230 alloy bar DIN:NiCr22Mo16Al;JIS:NCF 230;UNSï¼?N06230ï¼?W.Nrï¼?2.4733 Applications include surface gas turbine components and equipment, and equipment and components for petrochemical processing, heat treating, ore and metal refining.

Alloy 690 has excellent resistance to intergranular corrosion and intergranular stress corrosion cracking, and is mainly used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants. The material of the steam generator heat transfer tube of the pressurized water reactor nuclear power plant has undergone a development process, including 304 austenitic stainless steel, 600 alloy, 800 alloy and 690 alloy. In-service corrosion failures of Alloy 600 show that intergranular corrosion and intergranular stress corrosion cracking are the main problems. Alloy 690 as Heat Transfer Tube Material of Steam Generator in Pressurized Water Reactor Nuclear Power Plant. Inconel 690 is a high-temperature alloy, also known as UNS N06690. Some international standards and specifications for Inconel 690 include: American standards: ASTM B166, ASTM B564, ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B514, ASTM B751, ASTM B670, ASTM B366, ASME SB-166, ASME SB-564, ASME SB-167, ASME SB-829, ASME SB-517, ASME SB-775, ASME SB-163, ASME SB-514, ASME SB-751, ASME SB-670, ASME SB-366 European standards: EN 2.4642, EN 2.4641, EN 2.4856, EN 2.4858, EN 2.4859, EN 10216-2, EN 10217-2, EN 10216-5, EN 10217-5, EN 10088-1, EN 10095, EN 10222-2, EN 10269, EN 10272, EN 10297-2, EN 10302, EN 10312 Japanese standards: JIS G4801, JIS G4804, JIS G4805, JIS G4802, JIS G4311, JIS G4312, JIS G4313, JIS G4321, JIS G4322, JIS G4323, JIS G4308, JIS G4318, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G3446 Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121. We can provide the following the form:Inconel690 alloy coil; Inconel690 alloy strip;Inconel690 alloy plate; Inconel690 alloy sheets; Inconel690 alloy tube; Inconel690 alloy pipe;Inconel690 alloy flat; Inconel690 alloy bar GB:GB/T14992;JIS:G4801;UNS:N066902.4642

Inconel 617 is a mixture of nickel, chromium, cobalt and molybdenum, high levels of nickel (44.5% minimum) and chromium (20-24%) give this alloy good resistance to reducing and oxidizing media. Cobalt (10-15%) and molybdenum (8-10%) combine to strengthen the solid solution. A small amount of aluminum (0.8-1.5%) is also included and works with chromium to provide good resistance to oxidation at high temperatures. One of the alloy's key properties is that it maintains high levels of strength even at elevated temperatures without compromising its corrosion resistance. The material is also very functional, as it can be easily formed and welded using traditional techniques. Here are the standard grade and execution standards for Inconel 617 in various countries: American standard grade: UNS N06617 Execution standards: AMS 5887: Melting material for nickel-based high-temperature alloys. AMS 5888: Inconel 617 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5889: Seamless and welded Inconel 617 tubes. AMS 5608: Inconel 617 bars and shapes. ASTM B166: Standard specification for nickel and nickel alloy rod, bar, wire, and strip. ASME SB-166: Same as above. European standard grade: NiCr22Co12Mo9 (2.4663) Execution standards: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat resisting steel and technical conditions for the delivery of heat resisting alloys. EN 10269: Technical delivery conditions for high temperature and corrosion resistant steels. EN 10204: Standard specification for metallic products - types, batch numbers and grade certificates. EN 10302: Technical delivery conditions for nickel alloy bars, hot rolled, forged, and cold worked. Japanese standard grade: NCF 617 Execution standards: JIS G4902: Standard specification for seamless and welded nickel alloy pipes. JIS G4903: Standard specification for seamless and welded nickel alloy pipes. Chinese standard grade: GH617 Execution standards: GB/T 14992: Standard specification for seamless and welded nickel alloy pipes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel pipes and welded steel pipes for hydraulic transmission. These execution standards specify the technical requirements for Inconel 617 material such as chemical composition, physical properties, processing, and testing requirements, ensuring its quality and performance meet the specified standards. We can provide the following the form:Inconel617 alloy coil; Inconel617 alloy strip;Inconel617alloy plate; Inconel617 alloy sheets; Inconel617alloy tube; Inconel617 alloy pipe;Inconel617 alloy flat; Inconel617 alloy bar EN:NiCr22Co12Mo9;JIS:NCF617;UNS:N066171;W.Nr:2.4663a

Inconel 622 is a nickel-based superalloy composed of nickel, molybdenum, cobalt, tungsten and other elements. The nickel content is about 60%. It is a general-purpose Ni-Cr-Mo-W alloy with overall corrosion resistance superior to other existing Ni-Cr-Mo alloys, including Hastelloy C-276, C4 alloy, and 625 alloy. Inconel622 has good resistance to pitting corrosion, crevice corrosion and stress corrosion cracking. It has excellent oxidation resistance in aqueous media, including wet chlorine, nitric acid or mixed acids containing chloride ions. Standard grades and specifications for Inconel 622: US standard grade: UNS N06622 Specifications: AMS 5540: Inconel 622 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5713: Inconel 622 bars and profiles. AMS 5714: Inconel 622 seamless and welded tubes. ASTM B168: Standard specification for nickel-chromium-iron alloys (UNS N066xx) plate, sheet, and strip. ASME SB-168: Same as above. European standard grade: NiCr21Mo14W (2.4856) Specifications: EN 10095: Technical delivery conditions for hot rolled and forged stainless steels and heat-resisting materials. EN 10269: Technical delivery conditions for steel alloys intended for use in high temperature and corrosive environments. EN 10204: Standard specification for type, batch, and quality certificates for metal products. EN 10302: Technical delivery conditions for hot rolled, forged, and cold worked nickel alloy bars. Japanese standard grade: NCF 622 Specifications: JIS G4902: Standard specification for seamless and welded nickel alloy tubes. JIS G4903: Standard specification for seamless and welded nickel alloy tubes. Chinese standard grade: GH3622 Specifications: GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14995: Standard specification for hot rolled, forged, and cold worked nickel alloy plates, sheets, and strips. GB/T 14996: Standard specification for nickel alloy bars and profiles. These specifications define the technical requirements for the chemical composition, physical properties, processing, and testing of Inconel 622 material to ensure its quality and performance meet the specified standards. We can provide the following the form:Inconel622 alloy coil; Inconel622 alloy strip;Inconel622alloy plate; Inconel622 alloy sheets; Inconel622alloy tube; Inconel622 alloy pipe;Inconel622 alloy flat; Inconel622 alloy bar EN:NiCr21Mo14W;JIS:NAS NM22;UNS:N06022;W.Nr:2.4602

Inconel722 is an alloy composed of nickel as the base and other elements. It is a kind of nickel-chromium alloy, nickel-iron alloy, nickel-copper alloy and nickel-molybdenum alloy. Nickel has good mechanical, physical and chemical properties, adding appropriate elements can improve its oxidation resistance, corrosion resistance, high temperature strength and improve some physical properties. It has excellent corrosion resistance and oxidation resistance, has good tensile properties and fatigue properties from low temperature to 980 �°C, and is resistant to stress corrosion in salt spray atmosphere. Here are the standard grades and specifications for Inconel 722: American standard grade: UNS N07722 Specifications: AMS 5541: Standard specification for hot-rolled Inconel 722 plate, sheet, and strip. AMS 5714: Standard specification for Inconel 722 bars and forgings. ASTM B637: Standard specification for nickel alloy bars and forgings. ASME SB-637: Same as above. European standard grade: NiCr21Mo14W (2.4858) Specifications: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and heat-resisting steel materials. EN 10269: Technical delivery conditions for high-temperature and corrosive environments. EN 10204: Standard specification for type, batch, and grade certificates for metal products. EN 10302: Technical delivery conditions for hot-rolled, forged, and cold-drawn nickel alloy bars. Japanese standard grade: - Specifications: JIS G4902, JIS G4903 Chinese standard grade: GH4220 Specifications: GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel tubes and welded steel tubes for hydraulic transmission. These specifications define the chemical composition, physical properties, processing, and testing requirements for Inconel 722 materials to ensure that their quality and performance meet the requirements. We can provide the following the form:Inconel722 alloy coil; Inconel722 alloy strip;Inconel722alloy plate; Inconel722 alloy sheets; Inconel722alloy tube; Inconel722 alloy pipe;Inconel722 alloy flat; Inconel722 alloy bar EN:NiCr21Mo14W;JIS:G4902;UNS:N07722;W.Nr:2.4858 1. Heat treatment industry. Such as furnace rollers, bell furnaces and annealing furnaces. 2. Calciner. For example, it can be used to calcinate high-performance corundum, calcinate chromite to produce ferrochrome alloy, and recover nickel used as a catalyst in petrochemical industry. 3. Chemical industry and petrochemical industry, use it to prepare new steam cracking naphtha furnace to produce hydrogen, etc. 4. Automatic device. Such as catalytic support system, spark plug. 5. Cleaning equipment for nuclear industry, such as nuclear waste removal. 6. Steel industry. Such as direct reduction of iron ore process to produce sponge titanium

Inconel 686 is suitable for use in amphoteric acids or amphoteric mixed acids, especially in corrosive environments containing high concentrations of chloride ions in amphoteric mixed acids. It has excellent resistance to uniform corrosion, electrochemical corrosion, localized corrosion and hydrogen embrittlement in seawater, and seawater has little effect on its fatigue strength. Therefore, Inconel686 alloy is an ideal material for marine environment applications, such as fasteners in seawater. The yield strength after cold working strengthening can be as high as 150ksi (1000MPa), and it has the same corrosion resistance as the solid solution state. Inconel 686 alloy is used in corrosive environments such as chemical process, pollution control (flue gas desulfurization), papermaking, pharmaceutical and garbage disposal. Inconel686 welding material is an ideal corrosion-resistant material for surfacing of steel. Here are the international standard designations and specifications for Inconel 686: American standard designation: UNS N06686, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B446, ASTM B462, ASTM B564, ASTM B166, ASTM B462, ASTM B472, ASTM B626, ASTM B408, ASTM B473, ASTM B444, ASTM B729, ASTM B677, ASTM B622, ASTM B829, ASTM B366. German standard designation: W.Nr. 2.4606, Specifications: DIN 17744, DIN 17750, DIN 17752, DIN 17754. Japanese standard designation: JIS NW686, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH686, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012. We can provide the following the form:Inconel686 alloy coil; Inconel686 alloy strip;Inconel686 alloy plate; Inconel686 alloy sheets; Inconel686 alloy tube; Inconel686 alloy pipe; Inconel686 alloy flat; Inconel686 alloy bar DIN:17744;JIS:NW686;UNS:N06686;W.Nr:2.4606 Mainly include chemical treatment, pollution prevention and control, pulp and paper, industrial waste and domestic waste treatment. Chemical processing includes heat exchangers, reactors, evaporators and transfer piping. Air pollution prevention includes chimney linings, pipes, furnace doors, scrubbers, flue gas reheaters, propellers, housings

Inconel 601, an alloy material. Excellent oxidation resistance at high temperature, good carbonation resistance, good oxidation resistance to sulfur-containing atmosphere, good mechanical properties at room temperature and high temperature, good resistance to stress corrosion cracking due to controlled Carbon content and grain size, 601 has higher creep rupture strength, so it is recommended to use 601 in the field above 500 �°C. Below are the international standard designations and specifications for Inconel 601: American standard designation: UNS N06601, Specifications: ASTM B166, ASTM B167, ASTM B168, ASTM B775, ASTM B829, ASTM B517, ASTM B751, ASTM B775, ASTM B829, ASTM B775, ASTM B751, ASTM B775, AMS 5715, AMS 5870, AMS 5871, AMS 5580, AMS 5715, AMS 5870, AMS 5871, AMS 5580. German standard designation: W.Nr. 2.4851, Specifications: DIN 17742, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NCF 601, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH236, Specifications: GB/T 5580, GB/T 14992, GB/T 14995, GB/T 14997, GB/T 15000, GB/T 15001. We can provide the following the form:Inconel601 alloy coil; Inconel601 alloy strip;Inconel601 alloy plate; Inconel601 alloy sheets; Inconel601 alloy tube; Inconel601 alloy pipe; Inconel601 alloy flat; Inconel601 alloy bar GB:1Cr23Ni60Fe13Al;JIS:NAS 601/NCF 601;UNS:N06601;W.Nr:2.4851 1. Trays, baskets and fixtures used in heat treatment factories. 2. Steel wire split annealing and radiant tubes, high-velocity gas burners, wire mesh belts in industrial furnaces. 3. Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing. 4. Exhaust system components 5. Combustion chamber of solid waste incinerator 6. Pipe supports and soot handling components 7. Exhaust gas detoxification system components 8. Oxygen reheater

INCONEL 22 is extremely resistant to water and general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, tough and versatile even at high temperatures. A nickel base with 22% chromium, Inconel 22 is completely austenitic. This means it is non-magnetic and will not harden with heat treatment. Nickel also helps protect the alloy from corrosion by halides such as chloride and fluoride when subjected to extreme heat. In addition to nickel and chromium, Inconel 22 contains 14% molybdenum and 3% tungsten. These two metals make the alloy resistant to wet reducing media such as iron, copper salts and nitric acid. Combined with chromium's resistance to wet oxidizing media such as iron salts, copper salts and nitric acid, this makes Inconel 22 particularly suitable for use in highly corrosive environments where safety is paramount. American standard designation: UNS N06022, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B335, ASTM B622, ASTM B626, ASTM B366, ASTM B574, ASTM B622, ASTM B619, ASTM B775, ASTM B462, ASTM B564, ASTM B472, ASTM B775, ASTM B829. German standard designation: W.Nr. 2.4602, Specifications: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754. Japanese standard designation: JIS NW6022, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH3030, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012. We can provide the following the form:Inconel22 alloy coil; Inconel22 alloy strip;Inconel22 alloy plate; Inconel22 alloy sheets; Inconel22 alloy tube; Inconel22 alloy pipe; Inconel22 alloy flat; Inconel22 alloy bar GB:GH3030;JIS:NW6022;UNS:N06022;W.Nr:2.4602 Pollution control (flue gas desulfurization), waste treatment, power generation, pulp and paper processing, marine applications, and chemical and petrochemical processing.

Product: ICUMSA 45 sugar (600-1200) Origin: Brazil Minimum Quantity: 12,500MT X 12 Payment: 100% SBLC/DLC at sight Loading Price: Depend on Quantity Delivery: CIF / FOB