High Speed Steel Scrap (Hss) Suppliers and Manufacturers

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.

We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity

We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.

We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol

Surface Color Blue Material Grade 65Mn 50# Hardness 43-49HRC Width 30-300mm, 0.2 Thickness 0.27-2.5mm , 0.03 Weight Width 1.4*45mm 70-100KGS; Width 100mm 150-170KGS; Width 150-200mm 250KGS. Edge Round/cutting Package Waterproof paper inside,then plastic film,finally hessian cloth or corrugated or carton.wood pallet or iron

Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness

Mychef Quick 1 High Speed Oven

Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press

65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2

65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2