* No upfront payment Russian Origin Rate / MT: Ask Min. Order Qty : 50,000 MT / Month Max. Supply Capacity : 500,000 MT/ Month Delivery: CIF ASWP With Rolls & Extensions Inspection: SGS (At sellers expense at Loading Port & Buyer expense at discharge port) PAYMENT INSTRUMENT: SBLC/MT76 - 0, DLC/MT700 - MT 799 BLOCK FUNDS PAYABLE 100% BY TT/MT103 AT DISCHARGE PORT 5/FIVE DAYS LATE AFTER CIQ /SGS INSPECTION LOADING PORT: Vladivostok/Novorossiysk Port. PERFORMANCE BOND (PB): 2% PB to be issued by Sellers Bank in favor of the Buyer. COMMISSION: PAID BY THE SELLER ACCORDING IMFPA SCO / Procedure / Rate : To be provided Upon request
Product: Diesel Gasoil L-0.2-62 (gost 305-82) Origin: Russian Federation Moq Quantity: One Hundred Thousand (100,000) Metric Tons With R&e Into Yearly Contract Cif Price: Us$310.00 Gross / Us$300.00 Net Per Mt Fob Price: Us$290.00 Gross / Us$280.00 Net Per Mt Terms Of Transaction: Loading Ports: Rotterdam / Turkmenistan / Primorsk / Vladivostok / Novorossiysk Inspection: Sgs For The Quality & Quantity Test Report Insurance: Paid By Seller, Covering 110% Of Shipment Value Commission Per Gallon Seller / Buyer�??s Side - $0.02 Usd Per Gallon Commission Per Barrel Seller / Buyer's Side - $4.00 Usd Per Barrel Commission Per Metric Ton Seller / Buyer's Side - $10.00 Usd Per Metric Ton Mark Up Or Over Price Not Allowed By The Refinery*** Freight On Board (fob) Transaction Procedure: 1. Buyer Accepts Seller's Procedure And Issues Irrevocable Corporate Purchase Order (icpo) With Tank Storage Agreement (tsa If Absent Buyer Extends Seller's Tank Storage With Product For A Minimum Of Five (5) Business Days), Banking Details, Company Registration And Valid Passport Copy. 2. Seller Conducts Due Diligence On Buyer And Issues Commercial Invoice Agreement If Buyer Is Approved. Buyer Signs Commercial Invoice And Returns To Seller For Countersigning And Endorsement. 3. Seller Issues To Buyer The Below Partial Proof Of Product (ppop) Documents As Endorsed: Refinery Commitment To Supply Certificate Of Origin Authorization To Sell (ats) Confirmation Of Allocation Product Quality Passport (analysis Test Report) Company Registration Certificate 4. Buyer Requests For A Commitment Letter From Its Tank Storage Company To Be Signed By Buyer's Tank Storage Company (if Absent Buyer Extends Seller's Tank Storage With Product For A Minimum Of Five (5) Business Days), Buyer Then Return A Copy Of The Commitment Letter To Be Signed And Confirmed By The Seller. 5. Seller Issues Buyer Unconditional Dip-test Authorization Letter To Enable Buyer Along With Its Sgs Team Conduct Dip-test On Seller's Tanks With Its Terminal Access Permit And Clearance To Come Into Its Tank Facilities To Conduct Its Dip Test And Confirm Product Quantity And Quality. 6. Seller Issues Full Proof Of Product Documents: Company Registration Certificate Tank Storage Receipt Fresh Sgs Injection Report Change Of Ownership Certificate Authorization To Sell And Collect Company Tax Payment Certificate 7. Signing Of Non-circumvention, Non-disclosure Agreement (ncnda)/irrevocable Master Fee Protection Agreement (imfpa)-for Intermediary Fees Protection And Legalization By All Intermediaries.
RUSSIA ORIGIN DIESEL GAS D2 OIL GOST 305-82 Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 500,000 Metric Tons per Month CIF Price: Gross USD $ 300.00MT NET / USD $ 290.00 MT on CIF FOB Price: Gross USD $ 290.00MT NET / USD $ 280.00 MT on FOB/Novorossiysk/Rotterdam
RUSSIA ORIGIN DIESEL GAS D2 OIL GOST 305-82 Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 500,000 Metric Tons per Month CIF Price: Gross USD $ 300.00 / USD $ 290.00 NET on CIF
RUSSIA ORIGIN DIESEL GAS D2 OIL GOST 305-82 Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 500,000 Metric Tons per Month CIF Price: Gross USD $ 300.00 / USD $ 290.00 NET on CIF
We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )
1. Density at 20oC,Kg/m3................ Max 860 2. Fraction composition (Distillation):
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
COMPONENT UNIT MIN. MAX. Density@ 20 deg C Kg/m3 0,840 Colour 1.1 Flash point, PMCC deg C ( C ) 66 69.0 Kinematics viscosity @20 deg C C ST 3,0 6,0 Pour point deg C ( C ) (*) -10,0 Cloud point deg C ( C ) (*) -5,0 Mercaptan sulphur 0,004 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0,01 Total Sulphur %wt 0,005 0,02 Copper corrosion 3 hrs@50 deg C (typical) 1 A CCR on 10% Residues %wt 0.20 Cetane index 45 Distillation range : - 50% Recovered Volume deg C ( C ) 280 - 90% Recovered Volume deg C ( C ) 365.7 - Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP - 5.0 degrees C) Summer from March to October (CP - 0.0 degrees C) Winter from November to February (PP - 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
PRODUCT: DIESEL D2 OIL GOST 305-82 Price CIF AWSP: Gross US $215 / Net $200 Price FOB Rotterdam: Gross US $205 / Net $190 FIRST TRIAL LIFT: 50,000 MT SUBSEQUENT TRANCHE: 500,000 MT PER MONTH X 12 MONTHS WITH POSSIBLE 60 MONTHS SUBJECT TO CONFIRMATION. QUANTITY: Min 50,000 MT / Max 500,000 MT
Diesel (D2) is a refinery abbreviation for Gasoil. It is the second distillate from the processing of crude oil. It can be used without reformers and additives. Origin: Russian Federation / Republic of Kazakhstan Price: Gross $310.00/Net $300.00 per Metric Ton Trial Shipment: One Hundred Thousand (100,000) Metric Tons Available Loading Port: Novorossiysk /Premorskiy/ Ust Luga / Port of AKTAU (KZAAU) Discharging Port: CIF safe world port
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Kazakhstan, India Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT
JET FUEL OIL (JP54/JPA1), D6, DIESEL GAS, VIRGIN FUEL OIL D2, LIQUEFIED PETROLEUM GAS (LPG), LIQUEFIED NATURAL GAS (LNG), FUEL OIL OCTANE, LIGHT CYCLE OIL, Petroleum Coke
Fuels products of: ja54, jet a1, d6, diesel gas d2, ultra low sulfur diesel, en590, light cycle oil, ago (automotive gas oil), rebco, liquefied natural gas, lpg, espo blend crude oil, and any other fuel products such as asphalt, petroleum coke, mazut 75 & 100 bitumen 60/70, bitumen 80/100. urea n46% prilled & granular. mineral fertilizers to the agricultural sector russian origin urea 46% prilled & granular npk fertilizers. di ammonium phosphate (dap) 18 46 0 automotive grade prilled urea adblue diesel exhaust fluid (def) high purity imidazolidinyl urea metal products of: used rail, steel billets, copper cathodes, copper millberry, aluminum ingot, iron ore, coal, copper powder, and any other metal products. agriculture products such as palm oil, icumsa 45 sugar, crude/refined soybean oil, gmo/nongmo soybeans, common wheat, yellow corn, olive oil, sunflower oil etc... meat chicken paws and feet and pork, beef, etc... syringes (made in korea), test kit, ppe.
Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition. Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives Specifications for Gasoil D2 L-0.02/62 / GOST 305-82 COMPONENT UNIT MIN MAX Density at 20C Kg / m�³ 0.870 Colour 2.0 Flash point, PMCC Deg C (�°C) 57 62 Kinematic viscosity at 20C C ST 3.0 6.0 Pour point Deg C (�°C) (*) -10.0 Cloud point Deg C (�°C) (*) -5.0 Mercaptan sulphur 0.01 Acidity, mg / 1000 cm�³ 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.02 0.05 Copper corrosion 3hrsat50 deg C (typical) 1 A CCR on 10% Residues %wt 0.02 Cetane index 45 Distillation range : - 50% Recovered Volume deg C (�°C) 280 - 90% Recovered Volume deg C (�°C 360 Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)