Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm - 57mm (11/16 to 2-3/4) Square Bars 18mm - 47mm (11/16 to 1-3/4) Flat Bars 1/2 to 10 in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
size upon request
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Bar mops, dish cloth, duster cloth, floor cleaning cloth, stockinet rolls, face cloth, hand towels, bath towels, beach towels, kitchen towels, tea towels ( stripped, checked, printed, embroidered, jacquard ), waffle weave kitchen towels, glass cloth, herringbone kitchen towels, terry tea towels, mono check tea towels, aprons, pot holders, hot pad, oven mitts, silicon oven mitt, terry oven mitt, pan grabbers, chef hat, caps, socks ( cotton, polyester ), cotton rag rugs & mat, bed sheets, table cloth, napkins, cushion covers, thermal blankets, fleece blankets, mink blankets, floor carpet, cotton bags, tote bags, shopping bags, jute bags, paper / board bags, fruit picking bags, coin bags, cotton webbing tape, cotton/ polyester braided cards, home textiles & made ups, jute webbing, pp webbing, soft plant tie, coconut coir pith / peat..
We offer TMT Bars of following cross sections. Length: 6- 12 meter as per customer requirement. We also supply cut and bend TMT as per the Ring sizes required by the construction projects. Grades: FE 500, FE 500D, FE 600 Standards: IS -1786, ASTM A 615 Grade 60, JIS G 3112-2004 etc.
Cut to length TMT as per specific requirement of Customer. Cut and bend of TMT in any shape with numerical control.
Rebar steel is a type of steel that is used to reinforce concrete. It is a high-strength steel that is made to withstand the forces of tension and compression. Rebar steel is used in a variety of construction applications.
Introducing our premium-grade aluminum billets designed for automotive precision. Crafted with precision and durability in mind, these billets serve as the raw material for manufacturing critical components in the automotive sector. Benefit from the lightweight properties and structural integrity that our aluminum billets offer for enhanced vehicle performance.
Standards ASTM / ASME B165, B725, B730 / SB165, SB725, SB730 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / Welded Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB Length Single Random, Double Random & Required Length End Plain End, Beveled End, Treaded
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Commodity: Remelted aluminum ingot (A7) Specification: AI>99.7%, AI 99.7% min, FE 0.17% max, SI 0.10 max Quantity: 5000 MT minimum order. Inspection: CCIC/SGS at loading port to be borne by the seller, CIQ at loading port, to be borne by the seller Origin: Africa Incoterms 2010: CIF Delivery shall be performed by the seller to any port within 30 days after SPA signed.
End of life steel rod, typically pulled out of concrete infrastructure. Material must be free of concrete and other contaminants.
Sizes (mm): 8,10,12,14,16,18,20,22,25,28,30 Length : 3-12M or as your request Product Standards: JIS, ASTM,GB1499,2-2007,GB,EN XG1-2009,GB1499.1-GB1499.1,JIS G3112-87,BS4449-97
Aluminum Handrail
Secondary used surplus steel, electrical steel, transformer lamination, crgo, silicon steel cold rolled and hot rolled, seamless steel tubes, steel pipes scrap, transformers scrap, copper scrap, aluminium scrap, aluminium cable, copper cable, bright bars, black bars, shafts, hollow shafts, stainless, brass, wire rope.International trade
Customized Short Drinking Cow Horn Cup; Viking Handmade in Nigeria Horn Cup Drinking, Horn Glass For Parties And Beer Cup cheap Overall Horn length : 4.5" Horn Glass width : 2.2" Capacity : 225ml Material : Horn & Wooden Base Viking Drinking Horn Glass can be used for Water, Wine, Ale, and Beer Holds. Ordered Item may not same in shape and color texture as two horns are never same Made from 100% Real Buffalo Horn. *Use your horn mug often Wash every time before use *Clean your horn items in lukewarm running water without soap or solvents. Viking Drinking Horn Cups for sale; beer wine goblets gifts for men. We have in store, wide collections of Drinking Horn Cups. The cups offered by us are manufactured using optimum quality raw materials, which are perfectly clean inside. OX Viking Drinking Horn Cup Game of Thrones Gift for Father, Friends, Relative Viking decor, Viking horn, Viking gifts for men. Height: 6 inches up Description:- Polished Cow Horn Drinking Cup: Small / Large Sizes / Heights: 6 inches / 15cm 7 inches / 18cm 8 inches / 20cm 9 inches / 23cm 10 inches / 26cm Weight/kg: 0.5kg Minimum Order: 3 Price Available on request
We are engaged in offering wide range of Stainless Steel 316 Round Bars that is widely demanded in several industries. These stainless steel 316 Round Bars are manufactured using high grade of raw material that is sourced from our reliable vendors. These are having excellent corrosion resistance and are easy to operate. These are available in various sizes and dimensions as per the industrial specifications and quality standards.
Copper Hex Bars feature superior constitution including presence of 99.99% of copper content that makes these hex bars perfect for use in a wide range of electrical applications. Further, our expertise also allows us to deliver these as per International Standards including DIN, ASTM, JIS, BS EN, and IS as demanded by the customers. We also offer these with electro-plated tin plating finish.
Copper Round Bars find usage in electrical applications and are developed so as to meet the demands of international standards which includes coming with copper content of 99.99%. The superior finish of copper also makes it perfect to be used for hot as well as cold forming applications as well as for applications needing extensive machining.
Copper Square Bars are best used for electrical applications and are developed as per standards followed internationally. Further, these square bars have Copper Content of 99.99% and are made available in finish standards including JIS, BS EN, DIN, ASTM and IS and other options as demanded by the customers. here, our expertise also lies in making these precision constituted and constructed copper square bars made available with surface treatment comprising electro-plated tin plating which provides vital assistance in improving effectiveness of jointing surface as well as in reducing electrical resistance of joints. Further, our expertise also lies in making these available in chemical and mechanical characteristics in accordance with European standards, thus meeting the complete demands of the customers.
