Ash Lumber Suppliers and Manufacturers

Fly ash is a finely divided residue made from the combustion of pulverized coal that can be used to increase concrete durability and workability, while reducing permeability.

Fly Ash a byproduct derived from the combustion of coal encompasses the finely dispersed particles that ascend with the flue gases The ash which accumulates at the bottom is referred to as bottom ash Prior to venting through the chimneys of coalfired power plants Fly Ash is diligently captured by electrostatic precipitators and other particle filtration equipment When combined with bottom ash extracted from the furnaces base it collectively assumes the nomenclature of coal ash The specification of Fly Ash varies significantly contingent upon the coal type in use however it consistently contains notable quantities of silicon dioxide and calcium oxide CaO both intrinsic constituents of numerous coalbearing rock strata Our establishment headquartered in India boasts a distinguished reputation as a Fly Ash Exporter catering to diverse sectors including cement ready mix concrete steel refractories and the construction industry Prominent Applications of Fly Ash encompass 1 Manufacture of Portland Pozzolanic Cement Performance Enhancement in Ordinary Portland Cement OPC 2 Partial Replacement of OPC in Cement Concrete 3 HighVolume Fly Ash Concrete 4 RollerCompacted Concrete Employed in Dam and Pavement Construction 5 Production of Ash Bricks and Other Building Materials 6 Construction of Road Embankments Structural Fills and LowLying Area Development 7 Utilization as a Soil Amendment in Agriculture and Wasteland Development Fly Ash can be categorized into two types based on the coal used Class F Fly Ash This type results from the combustion of anthracite and bituminous coal Class F Fly Ash typically contains lower levels of lime usually under 15 percent but higher proportions of silica alumina and iron exceeding 70 percent Class C Fly Ash Produced by burning lignite or subbituminous coal Class C Fly Ash exhibits selfcementing properties It often possesses a higher lime content frequently exceeding 15 percent and sometimes reaching as high as 30 percent This elevated CaO content contributes to the distinctive selfhardening attributes of Class C Fly Ash Both Class F and Class C Fly Ash are outcomes of coal combustion in largescale power plants Following collection in electrostatic precipitators or baghouses Fly Ash is transferred to substantial silos for distribution To ensure consistency and quality Fly Ash is classified according to precise particle size specifications when required Our minimum order quantity is one container reflecting our commitment to meeting the diverse needs of our clientele

Fly Ash generated from Power Plants. Coal Fly Ash CFA could be used in huge quantities in two areas: ash dyke construction and low-lying region filling [26,27,28]. In several affluent countries, CFA has been utilized successfully as a structural filler.

Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc. in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents. It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.

Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc. in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents. It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.

Fly Ash MOQ : 1 Ton Business Type Exporter, Supplier, Trader Raw Material Cement Color Grey Condition Dry Preferred Buyer From Location Worldwide Product Details Form Powder Application Building Construction Type Fly Ash Country of Origin India At We Care, we provide the best fly ash in Meerut, Uttar Pradesh for your business. We are your trusted wholesale fly ash supplier in India. We take customer satisfaction seriously and endeavor to be among the best fly ash exporters. Unparalleled Quality As a reliable fly ash supplier in India, we source what we offer from reliable companies. We make use of the most up-to-date technology to meet the unique requirements of the market. With the application of our fly ash, you can count on the same performance any time you use it. Versatile Applications The fly ash that We Care supplies has multiple roles and can be used in various applications. In construction and many other sectors, you can rely on our fly ash as the perfect option for your project. Be it improving the soil quality or reinforcing concrete, trust us, as your fly ash exporters in India. Unbeatable Pricing At We Care, we acknowledge the pivotal role cost-effectiveness plays in your business operation. This is just the reason why we offer reasonable rates without compromising the quality of our fly ash. Be confident that we will provide you with the finest value for your money. Our team is highly committed to delivering quality at every step. Through the whole process, starting with the first inquiry, we will be at your service to help you. Whatever service you may needâ??product selection or logisticsâ??we will be your reliable partner at all times. Call us now to learn more about our fly ash solution.

Soda Ash Light is one of the most important basic industrial chemicals and the most widely used fixed alkali for the manufacture of other Alkali Products. It is used in the manufacturing of Detergents, Sodium silicates, Bicarbonates, bichromates, Pulp & Paper, cellulose, rayon, iron and steel, aluminum, cleaning compounds, water-softening chemicals, textiles and dyestuffs, drugs, and many other materials.

Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications. Usage: Paper-manufacturing, textile, dyeing, synthetic detergent, soap, tiles, ceramics and glazes. Packing: 50kg bags, 1250kg jumbo bags. Items Specification Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.002 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.55- 0.65 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min

Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts. Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid. Packing: 50kg bags, 1200kg jumbo bags. Item Specifications Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.004 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.85 1.1 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min

Product Description: Our Sodium Ash Light is a high-quality chemical compound consisting of sodium carbonate (Na2CO3), sodium hydroxide (NaOH), and sodium bicarbonate (NaHCO3). Stored under controlled temperatures, it is a reliable and stable product. Use Case Scenarios Industrially: Glass Manufacturing: Sodium Ash Light acts as a flux, aiding in impurity removal and lowering the melting point of silica. Detergent Production: It serves as a pH regulator and water softener, enhancing detergent efficiency. Chemical Synthesis: Sodium Ash Light is a vital reagent in various chemical synthesis processes. Metallurgical Applications: It helps remove impurities and control pH levels in metal refining and smelting. pH Control and Water Treatment: Sodium Ash Light adjusts pH levels and softens hard water. Contact us for competitive pricing and prompt delivery of our Sodium Ash Light. Trust us as your reliable supplier for all your chemical needs.

We can offer Soda ash Light, which is used in production of Soaps & Detergent, Textile, Paper and Sodium Silicate

True specific gravity 2.533 (20�°C), bulk density 0.90min. Easily soluble in water, Maximum solubility at 35.4�°C. The aqueous solution appears strong alkalinity. On exposure to air it easily absorbs moisture, carbon dioxide, and gradually forms sodium bicarbonate (caking soda). Usage: 1.The manufacture of glass is one of the most important uses of sodium carbonate. When it is combined with silica (SiO2) and calcium carbonate (CaCO3) and heated to very high temperatures, then cooled very rapidly, glass is produced. This type of glass is known as soda lime glass. 2. Soda ash also is used to clean the air and soften water. 3. Manufacture of Caustic Soda and dyestuffs 4. metallurgy (processing of steel and extraction of iron etc), 5. (flat glass, sanitary pottery) 6. national defense (TNT manufacturing, 60% gelatin-type dynamite ) and some other aspects, such as rock oil refining, paper manufacturing, paint, salt refining, softening of hard water, soap, medicine , food and so on.

Packaging Size 25 Kg Form Liquid Color Transparent Grade Industrial Country of Origin Made in India

Grade Industrial Grade Purity % 99.9% Usage/Application Industrial Packaging Details 25 Kg Bag Grade Standard Industrial Grade Form Powder Packaging Size 25 Kg Physical State Powder Country of Origin Made in India

Brand Tata Form Powder Packaging Size 25 Kg Usage/Application Industrial Physical State Powder Grade Standard Industrial Grade Packaging Type Bag We are counted among the well-reputed firm for providing Soda Ash to our esteemed patrons. Other Details: Sodium Carbonate

Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper

Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc . Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper

Eltee DMCC is the Largest Exporters of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to Bangladesh in very Large Quantities. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.