321 Stainless Steel Round Bar Suppliers and Manufacturers

Stainless Steel Kitchenware (Bowls) Dia 160 x 75mm 240gr / Dia 135 x 65mm 200gr / Dia 115 x 60mm 140gr / Dia 95 x 55mm 120gr Material: Stainless Steel 304 Thickness: 0.5mm Cover: PP (Polypropylene) Made In Korea

Duplex 2205 is a nitrogen-enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. Duplex ? describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance). Usage of 2205 Duplex stainless steel should be limited to temperatures below 600 F. Extended elevated temperature exposure can embrittle 2205 stainless.

Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking. Usage of Duplex 2507 should be limited to applications below 600�?�° F (316�?�° C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507. Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting savings in weight can dramatically reduce the overall cost of fabrication. The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance). Usage of 2205 Duplex stainless steel should be limited to temperatures below 600 F. Extended elevated temperature exposure can embrittle 2205 stainless

Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Duplex:3RE60(Cr18) SAF2304 (Cr23)SAF2205 (Cr22) SAF2507(Cr25) Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architecture; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure, Lead Time 7-15 working days

Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL

Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness: 0.3-60mm Width: 500-2000mm or customized Length: 1000-6000 or customized Standard size: 1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application: Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.

310S stainless steel is a highly alloyed austenitic stainless steel that is designed for use in high-temperature applications. It contains a high percentage of chromium and nickel, as well as a low amount of carbon, which gives it excellent resistance to oxidation, sulfidation, and other forms of high-temperature corrosion. Some of the key properties of 310S stainless steel include: High-temperature resistance: 310S can withstand high temperatures up to 1150�°C (2102�°F) without losing its strength or corrosion resistance properties, making it ideal for use in applications such as furnace parts, heat exchangers, and kilns. Corrosion resistance: 310S offers excellent resistance to oxidation, sulfidation, and other forms of high-temperature corrosion, as well as resistance to aqueous corrosion. Strength and toughness: 310S has good strength and toughness, making it suitable for use in demanding applications. Fabricability: 310S is easily formable using standard methods, and can be welded using common welding techniques. 310S stainless steel is commonly used in a range of high-temperature applications, including: Furnace parts, such as burners, heating elements, and retorts Heat exchangers and boilers Kilns and other high-temperature processing equipment Chemical processing equipment Power generation equipment, such as gas turbines and exhaust systems Overall, 310S stainless steel is a highly versatile and reliable material that is well-suited for use in a range of high-temperature applications where superior corrosion resistance and strength are required. The following are some of the commonly used international standards for 310S stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10095: Heat resisting steels and nickel alloys JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:310S stainless steel coil; 310S stainless stee strip;310S stainless stee plate; 310S stainless steel sheets; 310S stainless steel tubes; 310S stainless steel pipe; 310S stainless steel flat; 310S stainless steel bar

347 stainless steel is a stabilized austenitic stainless steel that contains niobium, which helps to prevent intergranular corrosion that can occur during welding and exposure to high temperatures. It is often used in high-temperature applications due to its excellent resistance to oxidation and its ability to withstand high temperatures without losing its strength or corrosion resistance properties. Some of the key properties of 347 stainless steel include: High-temperature resistance: 347 can withstand high temperatures up to 870�°C (1600�°F) without losing its strength or corrosion resistance properties, making it ideal for use in high-temperature applications such as furnace parts and exhaust systems. Corrosion resistance: 347 offers excellent resistance to corrosion, including aqueous corrosion and stress corrosion cracking. Weldability: 347 is easily weldable using common welding techniques, and the addition of niobium helps to prevent intergranular corrosion that can occur during welding. Strength and toughness: 347 has good strength and toughness, making it suitable for use in demanding applications. Some of the common applications for 347 stainless steel include: High-temperature furnace parts, such as burners and heating elements Exhaust systems in automobiles, aircraft, and industrial equipment Chemical processing equipment Jet engine parts Heat exchangers Overall, 347 stainless steel is a highly reliable and versatile material that is well-suited for use in high-temperature applications where superior corrosion resistance and strength are required, and where welding is required. The following are some of the commonly used international standards for 347 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10095: Heat resisting steels and nickel alloys JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:347 stainless steel coil; 347 stainless stee strip;347 stainless stee plate; 347 stainless steel sheets; 347 stainless steel tubes; 347 stainless steel pipe; 347 stainless steel flat; 347 stainless steel bar Widely used in boiler, power generation, petroleum, chemical, synthetic fiber, food, paper and other industries. Heat exchangers for large boiler superheater tubes, reheater tubes, steam piping and petrochemical.

420 stainless steel is a kind of martensitic stainless steel, which has the characteristics of certain wear resistance and corrosion resistance, and high hardness. 420 stainless steel is a martensitic grade of stainless steel that contains chromium and molybdenum, making it corrosion-resistant and hardenable. It has good strength, hardness, and wear resistance, and is commonly used in applications where high strength and moderate corrosion resistance are required, such as in cutlery, surgical instruments, and dental equipment. Some of the key properties of 420 stainless steel include: Corrosion resistance: 420 has good corrosion resistance in mild atmospheric environments and in most mild chemical environments. Hardness: 420 is a hardenable stainless steel and can be hardened by heat treatment, making it ideal for applications where high hardness is required. Wear resistance: 420 has good wear resistance due to its high hardness. Machinability: 420 has moderate machinability in the annealed condition, but is more difficult to machine in the hardened condition. Some of the common applications for 420 stainless steel include: Cutlery, including knives, scissors, and blades Surgical instruments, such as scalpels and forceps Dental equipment, including dental drills and hand tools Valve parts Pump shafts and bearings Overall, 420 stainless steel is a reliable and versatile material that is well-suited for use in applications where high strength, hardness, and moderate corrosion resistance are required. Here are some of the most common international standards for 420 stainless steel: ASTM A276: Standard Specification for Stainless Steel Bars and Shapes ASTM A314: Standard Specification for Stainless Steel Billets and Bars for Forging ASTM A473: Standard Specification for Stainless Steel Forgings ASTM A580: Standard Specification for Stainless Steel Wire EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes JIS G4303: Stainless steel bars GB/T 1220: Stainless steel bars We can provide the following form:420 stainless steel coil; 420 stainless stee strip;420 stainless stee plate; 420 stainless steel sheets; 420 stainless steel tubes; 420 stainless steel pipe; 420 stainless steel flat; 420 stainless steel bar 420 stainless steel is suitable for all kinds of precision machinery, bearings, electrical appliances, equipment, instruments, meters, transportation tools, household appliances, etc. It is mostly used in the manufacture of parts resistant to atmosphere, water vapor, water and oxidative acid corrosion.

434 stainless steel is a type of ferritic stainless steel that contains a higher amount of molybdenum compared to 430 stainless steel. This addition of molybdenum improves its corrosion resistance and makes it more resistant to pitting and crevice corrosion, especially in chloride-containing environments. It also offers good resistance to high-temperature oxidation and scaling. Here are some key properties of 434 stainless steel: Corrosion resistance: 434 stainless steel offers good resistance to corrosion, especially in chloride-containing environments. Heat resistance: 434 can withstand high temperatures without losing its strength or corrosion resistance properties. Its high chromium content provides excellent resistance to scaling and oxidation up to 815�°C (1500�°F). Weldability: 434 stainless steel can be welded using common welding techniques. Machinability: 434 is not as machinable as some other stainless steels, such as 304, due to its high hardness and low ductility. Magnetic properties: 434 stainless steel is a magnetic material. Overall, 434 stainless steel is a corrosion-resistant and heat-resistant material that is well-suited for use in high-temperature and chloride-containing environments. Its higher molybdenum content provides superior corrosion resistance compared to other ferritic stainless steels, making it a popular choice in applications such as automotive exhaust systems and chemical processing equipment. Here are some of the most common international standards for 434 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A268/A268M: Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service ASTM A554: Standard Specification for Welded Stainless Steel Mechanical Tubing EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip Application fields: Automotive exhaust systems and mufflers. Heat exchangers and furnaces. Chemical processing equipment. Industrial drying ovens. Kitchen utensils and appliances. We can provide the following of the form:434 stainless steel coil; 434 stainless stee strip;434 stainless stee plate; 434 stainless steel sheets; 434 stainless steel tubes; 434 stainless steel pipe;434 stainless steel flat; 434 stainless steel bar

444 stainless steel is a low-carbon, dual-stabilized ferritic stainless steel that is highly resistant to corrosion, especially in chloride environments. It is often used in applications where high corrosion resistance and good formability are required. Some of the key properties of 444 stainless steel include: Corrosion resistance: 444 stainless steel has excellent resistance to corrosion, especially in chloride environments such as seawater, brackish water, and chloride-containing acids and solvents. Heat resistance: It can withstand high temperatures up to 950�°C (1742�°F) without losing its strength or corrosion resistance properties. Formability: It has good formability and can be easily fabricated into various shapes and sizes. Weldability: It can be welded using common welding techniques, and does not require preheating or post-weld heat treatment. Cost-effective: Compared to other stainless steels, 444 stainless steel is a cost-effective option due to its lower nickel content. Some of the common applications for 444 stainless steel include: Automotive exhaust systems: It is often used in the manufacture of automotive exhaust systems due to its excellent corrosion resistance and heat resistance. Industrial equipment: It is also used in various industrial equipment such as heat exchangers, tanks, and piping systems. Kitchen appliances: It is used in the manufacture of kitchen appliances such as refrigerators, dishwashers, and ovens due to its good formability and corrosion resistance. Overall, 444 stainless steel is a highly versatile and cost-effective material that is ideal for use in corrosive environments where high corrosion resistance and good formability are required. Here are some of the most common international standards for 444 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A268/A268M: Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service ASTM A554: Standard Specification for Welded Stainless Steel Mechanical Tubing EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following of the form:444 stainless steel coil; 444 stainless stee strip;444 stainless stee plate; 444 stainless steel sheets; 444 stainless steel tubes; 444 stainless steel pipe;444 stainless steel flat; 444 stainless steel bar 444 stainless steel is generally used to manufacture stress corrosion resistant equipment, video machinery, automotive engine exhaust pipe storage tanks, solar water heaters, printing and dyeing machinery, heat exchangers, etc.

2205 stainless steel, also known as duplex stainless steel, is a type of stainless steel that is characterized by its two-phase microstructure consisting of both austenitic and ferritic phases. This combination of phases provides the alloy with improved strength and corrosion resistance compared to standard austenitic stainless steels. Some of the key properties of 2205 stainless steel include: High strength: 2205 stainless steel has excellent strength properties, making it suitable for use in demanding applications such as structural components and pressure vessels. Corrosion resistance: 2205 stainless steel provides good corrosion resistance in a variety of environments, including chloride-containing and acidic environments. Weldability: 2205 stainless steel is easily weldable using common welding techniques and does not require preheating or post-weld heat treatment. Fatigue resistance: 2205 stainless steel has good fatigue resistance, which makes it suitable for use in applications where cyclic loading is present. High toughness: 2205 stainless steel exhibits high toughness even at low temperatures, making it suitable for use in cryogenic applications. Overall, 2205 stainless steel is a highly versatile material that offers excellent strength and corrosion resistance properties, making it ideal for use in a wide range of demanding applications. Here are some of the most common international standards for 2205 duplex stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A789/A789M: Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service ASTM A790/A790M: Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10216-5: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes NACE MR0175: Sulfide stress cracking-resistant metallic materials for oilfield equipment NORSOK MDS D45: Qualification of manufacturers of duplex stainless steels UNS S31803/S32205: Unified numbering system designations for duplex stainless steels We can provide the following form:2205 stainless steel coil; 2205 stainless stee strip;2205 stainless stee plate; 2205stainless steel sheets; 2205 stainless steel tubes; 2205stainless steel pipe;2205 stainless steel flat; 2205 stainless steel bar

Electro galvanized wire BWG20 , wire diameter: 0.93-0.95 mm.

StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 3040Cr18Ni9A182F304SUSF30414301 Hardness 14H12H34HHO Chemical Composition Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS304 008 100 200 0045 0030 80100 1820 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS304 ANN 200 205 520 40 14H 200250 225 550 35 12H 250310 470 780 6 34H 310370 665 930 3 H 370430 880 1130 Surfce Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe

Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness:0.3-60mm Width:500-2000mm or customized Length:1000-6000 or customized Standard size:1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application:Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.

The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Product Specification and Steel Grade ASTM JIS AISI EN Mill\'s Standard S30100 SUS301 301 1.4310 S30400 SUS304 304 1.4301 S30403 - 304L 1.4307 S31008 SUS310S 310S 1.4845 S31603 - 316L 1.4404 201 S32100 SUS321 321 1.4541 202 S41008 SUS410S 410S - 204Cu3 S43000 SUS430 430 1.4016 S43932 - - 1.4510 S44400 SUS444 444 1.4521 S44500 SUS430J1L - - Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL Tolerance of Width W < 100 mm 100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm �?�??�?�?�?�± 0.10 mm �?�??�?�?�?�± 0.25 mm Chemical Composition & Mechanical Property : Steel Grade Ni% Max. Cr% Max. C% Max. Si% Max. SUS301 6.0~8.0 16.0~18.0 0.15 1 SUS304 8.0~10.5 18.0~20.0 0.08 1 SUS304L 9.0~13.0 18.0~20.0 0.03 1 SUS310S 19.0~22.0 24.0~26.0 0.08 1.5 SUS316L 12.0~15.0 16.0~18.0 0.03 1 SUS321 9.0~13.0 17.0~19.0 0.08 1 SUH409L 0.6 10.5~11.75 0.03 1 SUS410S 0.6 11.5~13.5 0.08 1 US420J2 0.6 12.0~14.0 0.08 1 SUS430 0.6 16.0~18.0 0.12 0.75 Mechanical Property (For Reference) Steel Grade N/mm 2 MIN. Tensile Stress N/mm 2 MIN. Proof Stress % MIN. Elongation HRB MAX. Hardness SUS301 520 205 40 95 SUS304 520 205 40 90 SUS304L 480 175 40 90 SUS310S 520 205 40 90 SUS316L 480 175 40 90 SUS321 520 205 40 90 SUH409L 360 175 25 80 SUS410S 410 205 20 88 SUS420J2 540 225 18 99 SUS430 420 205 22 88

StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 301 sus301 X12CrNi1707Cr17Ni71431 Hardness 14H12H34HHO Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS301 015 100 200 0045 0030 6080 1618 025 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS301 ANN 250 205 520 40 14H 250310 470 780 35 12H 310370 510 930 10 34H 370430 745 1130 5 H 430490 1030 1320 3 EN 490550 1275 1570 Surface Finish Surface Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe

Factory Direct Sell 201 304 316 6 inch welded stainless steel pipe Stainless steel welded pipes/tubes AISI 430 409L 441 436 444 different kinds of stainless steel welded pipes/tubes construction manufacturer welded stainless steel exhaust pipe 409 441 439 Supply ASTM 304 410 430 440 441 Seamless Stainless Steel tube pipe With Low Price 446 410 420 409L 441 436L stainless steel welded pipe for exhaust Good Prices SS Tube 420 431 439 441 443 Stainless Steel pipe 1.4307 Top sell high quality 441 stainless steel welded pipe per meter price 1 buyer Supply China ASTM 441 Seamless Stainless Steel tube/pipe With Low Price 304 316 321 Supply ASTM 441 Seamless Stainless Steel Tube/Pipe With Low Price

430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75