TEMPO laboratory furnaces are designed for higher temperature applications. The design is based on the highest standards for quality with efficient high-temperature use and minimal maintenance. Silicon carbide element with easy assembly. These lab furnaces are Ideal for rapid cycling over extended periods. The advance design feature provides fast heat up and recovery with excellent uniformity and energy efficiency, increased resistance to thermal shock, ideal for rapid cycling over extended periods. Temperature range 1300 C max (1250 C continuous) Supply Single phase/three phase This laboratory muffle furnace is designed to operate under high temperature with minimal maintenance and higher efficiency. The high-temperature ceramic fibre insulation with an advanced graded design ensures fast heat-up time and resistance to the thermal shock. The natural cooling of the outer surface reduces exterior shell temperatures and improve energy efficiency and operator safety. The thermocouples compensated lead wire and polarized plug for measures accurate high-temperature with a longer self-life. Removable panels for easy access to replaceable heating elements and thermocouples. The heating is achieved by silicon carbide element with easy mounting and assembly. Temperature Control The temperature is controlled by means of an imported microprocessor-based autotuned PID controller to avoid overshoot. CE marked and a dual display for set value and process value.
Categories: High purity graphite (LC), High carbon graphite (LG), Medium carbon graphite (LZ), Low carbon graphite (LD) Specification: Particle size 45m-500m (325 mesh - 32 mesh), carbon content 85-99.9%. Properties: The flake crystal is complete, the flake is thin and has good toughness, excellent physical and chemical properties, and has good high temperature resistance, self-lubrication, electrical conductivity, heat resistance, thermal shock resistance, corrosion resistance and other properties. Usage: Flake graphite is widely used in high-grade refractory materials and coatings in gold industry. Such as magnesia carbon brick, crucible, etc. Military industrial fire materials stabilizer, smelting industry desulphurization accelerator, light industry pencil lead, electrical industry carbon brush, battery industry electrode, fertilizer industry catalyst, etc. After deep processing of flake graphite, graphite emulsion can be produced for lubricant, release agent, wire drawing agent, conductive coating and so on. It can also produce expanded graphite for flexible graphite products, such as flexible graphite seals and flexible graphite composite products.
Categories: High purity graphite (LC), High carbon graphite (LG), Medium carbon graphite (LZ), Low carbon graphite (LD) Specification: Particle size 45m-500m (325 mesh - 32 mesh), carbon content 85-99.9%. Properties: The flake crystal is complete, the flake is thin and has good toughness, excellent physical and chemical properties, and has good high temperature resistance, self-lubrication, electrical conductivity, heat resistance, thermal shock resistance, corrosion resistance and other properties. Usage: Flake graphite is widely used in high-grade refractory materials and coatings in gold industry. Such as magnesia carbon brick, crucible, etc. Military industrial fire materials stabilizer, smelting industry desulphurization accelerator, light industry pencil lead, electrical industry carbon brush, battery industry electrode, fertilizer industry catalyst, etc. After deep processing of flake graphite, graphite emulsion can be produced for lubricant, release agent, wire drawing agent, conductive coating and so on. It can also produce expanded graphite for flexible graphite products, such as flexible graphite seals and flexible graphite composite products.
OBD2 10 Pin BMW motorbike cable to OBD2 16 Pin plug. This cable allows you to connect your BMW motorcycle to the scan tool. This diagnostic cable is designed for BMW Motorcycles/Motorbikes with 10 Pin Diagnostic Port (up to Model Year 2016). Made with high-quality automotive-grade materials. Using an OBD extension cable can save wear on the OBD connector of the fault diagnosis instrument, making it very suitable for hiding fast information processing, remote information processing, and home devices. 1, Contact Plating Type: Gold 2, The cable is with high quality brand new materials. 3, All wires are copper with excellent conductive performance. 4, The adapter is covered with ABS plastic to ensure excellent flexibility and durability. 5, Customized features are acceptable. 6, Factory direct deal. With competitive price, ensured quality and on time delivery. 7, The BMW 10pin 1m diagnostic line offers a strong connection, minimizing data loss and maximizing diagnostic accuracy. 8, Compatible with BMW ICOM/ICOM-D Diagnostic Tool, Unicarscan UCSI-2100 Bluetooth Adapter, and Motoscan app.
Categories: High purity graphite (LC), High carbon graphite (LG), Medium carbon graphite (LZ), Low carbon graphite (LD) Specification: Particle size 45m-500m (325 mesh - 32 mesh), carbon content 85-99.9%. Properties: The flake crystal is complete, the flake is thin and has good toughness, excellent physical and chemical properties, and has good high temperature resistance, self-lubrication, electrical conductivity, heat resistance, thermal shock resistance, corrosion resistance and other properties. Usage: Flake graphite is widely used in high-grade refractory materials and coatings in gold industry. Such as magnesia carbon brick, crucible, etc. Military industrial fire materials stabilizer, smelting industry desulphurization accelerator, light industry pencil lead, electrical industry carbon brush, battery industry electrode, fertilizer industry catalyst, etc. After deep processing of flake graphite, graphite emulsion can be produced for lubricant, release agent, wire drawing agent, conductive coating and so on. It can also produce expanded graphite for flexible graphite products, such as flexible graphite seals and flexible graphite composite products.
Categories: High purity graphite (LC), High carbon graphite (LG), Medium carbon graphite (LZ), Low carbon graphite (LD) Specification: Particle size 45m-500m (325 mesh - 32 mesh), carbon content 85-99.9%. Properties: The flake crystal is complete, the flake is thin and has good toughness, excellent physical and chemical properties, and has good high temperature resistance, self-lubrication, electrical conductivity, heat resistance, thermal shock resistance, corrosion resistance and other properties. Usage: Flake graphite is widely used in high-grade refractory materials and coatings in gold industry. Such as magnesia carbon brick, crucible, etc. Military industrial fire materials stabilizer, smelting industry desulphurization accelerator, light industry pencil lead, electrical industry carbon brush, battery industry electrode, fertilizer industry catalyst, etc. After deep processing of flake graphite, graphite emulsion can be produced for lubricant, release agent, wire drawing agent, conductive coating and so on. It can also produce expanded graphite for flexible graphite products, such as flexible graphite seals and flexible graphite composite products.
Bamboo processing machines have undergone significant advancements, aiming to enhance efficiency, reduce labor costs, and improve the quality of bamboo products. Among these innovations are automatic bamboo splitting machines, wire drawing machines, and bamboo strip rough planer machines. Bamboo processing machines are specialized equipment designed to handle the transformation of raw bamboo into various finished products. The bamboo industry encompasses a wide range of applications, from construction materials to furniture, and from handicrafts to edible bamboo shoots. Depending on the intended end product, bamboo processing can involve a variety of machinery, each tailored to specific stages in the processing chain. Bamboo processing machines play a pivotal role in automating various stages of bamboo processing. They offer a range of functionalities, from splitting bamboo poles to crafting intricate bamboo products. EOOE specializes in creating multifunctional machines that streamline the bamboo processing workflow. Their machines are designed to reduce manual labor, increase productivity, and ensure high-quality output.
We have surplus pallets of Nitrile Medical Examination Gloves, all FDA Approved (501K), high quality material that we bought for a customer overseas but he will not be able to import due to the regulations in his country, as he has no permit for that. The gloves are already registered for sale at Amazon and Walmart, if the buyer intends advertise on these platforms. Our company is selling those for an extremely competitive price, so we can clean space in our storage and focus on our core products for export (medical devices/medical drugs). We offer for sale the pallets loaded with boxes of gloves (each pallet with 105 cartoon boxes with 1,000 gloves each (each box with 1,000 units comes with 10 small boxes of 100 units each, inside). We consider fair offers. Payment ex-works, via wire transfer. Products can be inspected prior to payment. We can arrange shipment worldwide or send to the freight forwarder that you prefer. Look forward to hear from you soon.
En590 fob , Houston ,Kazakhstan , Fujairah procedure No upfront costs FOB TRANSACTION PROCEDURE 1. The Buyer sends ICPO on receipt and acceptance of the Seller's Offer alongside with the Buyer's Company Profile (CP). 1.1 Seller issues SPA contract. Buyer signs the SPA contract and returns 2. The Seller Issues Commercial Invoice (C I) for the Buyer's endorsement. 3. The Buyer signs and returns the C l to Seller. 4. The Seller issues to the Buyer: DTA. ATV. ATSC. 5. The Buyer contacts the Seller Tank Administrator to execute the Quality & Quantity, and to register in the Tank Farm Terminal prior to the Inspection. PORT FUJAIRA 6. Upon the Successful Dip Test Inspection in the Sellers Tank, the Buyer Submits NOR from his Shipping Company or his Tank Storage Seller Injects the product into the Buyer Vessel. Or Buyer Tank Storage. 7. The Seller releases the Complete POP Documents to the Buyer, including the following documents: Resource Confirmation Letter (issued by the End-Refinery). 8. The Buyer issues 100% payment for the total product by MT103/TT Wire Transfer to the Seller. 9. THE SELLER TRANSFERS THE PRODUCT TITLE WITH THE COMPLETE POP DOCUMENTS TO THE BUYER. THE SELLER PAYS THE COMMISSION TO BOTH SIDE INTERMEDIARIES AS PER MASTER FEE AGREEMENT
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
SNUOK Portable lithium brushless cordless constant temperature heat gun perfect for industrial heat shrink film blower electronic repair, 3 seconds fast heating, while configured with double heating wire, better heat gathering effect. The temperature reaches 280�°C-550�°C, to meet the different product requirements. Cordless Freedom: Enjoy the freedom to work anywhere without being tethered to a power outlet. Constant Temperature Control: Ensure uniform heat application with precision, eliminating the risk of overheating or damaging materials. Rapid Heating: Get to work quickly with rapid heating capabilities, minimizing downtime and increasing productivity. Ergonomic Design: Lightweight and ergonomically designed for comfortable handling during extended use. Versatile Applications: Ideal for shrink wrapping, paint stripping, soldering, and more in various industries. Upgrade your heat application tasks with the 21V Brushless Cordless Constant Temperature Heat Gun, and experience unparalleled efficiency and precision in every job.
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Composite Insulator for Sale Composite insulator is a special type of insulator composed of high-strength fiberglass rods and polyester resin impregnated materials. The advantage of this kind of insulator is that it has excellent high temperature resistance, corrosion resistance and anti-aging properties, which can effectively improve the safety and reliability of transmission lines. At the same time, composite insulators are light in weight, small in size, easy to install and maintain, and can effectively reduce the operating costs of transmission lines. In addition, the mechanical and electrical properties of composite insulators are superior to traditional porcelain insulators, which can effectively improve the safety and reliability of transmission lines. Features of Composite Insulator A composite insulator, also called a dielectric or nonconductor, is a material that resists the flow of electric current. This type of silicone rubber material is used in parts of electrical equipment intended to support or separate electrical conductors without passing current through itself. The term is also used more specifically to refer to insulating supports that attach electric power transmission wires to utility poles or pylons. Composite insulators are less costly, lighter in weight, and have excellent hydrophobic capability. This combination makes them ideal for service in polluted areas. However, these materials do not yet have the long-term proven service life of glass and porcelain.
IFE Machine Room Passenger Elevator List METIS-CR1 METIS-CR1 mr passenger elevator is a new generation product developed by IFE for the residential, office building and hotel market, highlighting the product concept of safety, comfort, energy saving and environmental protection, efficient service and high configuration. METIS-CR METIS-CR is a machine room product tailored by lift elevator for overseas residential, office building and hotel markets. METIS-CR Passenger Elevators are higher than Malaysian and domestic standards. METIS-CR Passenger Elevators Why Choose IFE Machine Room Passenger Elevator? Humanistic technology, safe and direct The MR passenger elevator's diameter of the wheel rope is 25% higher than the national standard, the service life of the steel wire rope is extended by 2 times, and the strength test of the landing door is higher than the national standard. Comfortable experience, energy saving and low consumption The electromagnetic compatibility emc standard certified by the eu ce authority. Safe and reliable Through a variety of product configurations and R&D technologies, the safe operation of the elevator is fully guaranteed, bringing passengers a safer and more reliable experience.
1. Screen size: 15.6 inches (IPS display), resolution: 3840*2160(UHD) 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut and IPS high-definition screen.It also has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience:with 16384 pressure level, the pen draws different lines and different inclination to make the painting more rich. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 4.High light transmission toughened glass design, seamless fit, which can restore colors and precise positioning. 5.Convenience: 8 user-defined shortcut keys on both side is designed for both left-right handed users; No need for battery or charging, support natural tilt of plus or minus 60°; Batter-free pen needs no wire and charge. 6.Comfort:The adjustable and foldable stand has two angles that can be adjusted 60°(55°~60°)/30°(25°~30°), which can create a comfortable angle, everyone can find their best angle.
1. Screen size: 15.6 inches (IPS display), resolution: 1920*1080 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut and IPS high-definition screen.It also has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience:with 16384 pressure level, the pen draws different lines and different inclination to make the painting more rich. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 4.High light transmission toughened glass design, seamless fit, which can restore colors and precise positioning. 5.Convenience: 8 user-defined shortcut keys on both side is designed for both left-right handed users; No need for battery or charging, support natural tilt of plus or minus 60°; Batter-free pen needs no wire and charge. 6.Comfort:The adjustable and foldable stand has two angles that can be adjusted 60°(55°~60°)/30°25°~30°), which can create a comfortable angle, everyone can find their best angle.
