Product Description NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)
We are offering ultra pure and ultra fine isotope copper powder (UPC), not radioactive, certified by IGAS Research, with the following specifications: IGAS analysis results: - Isotopic composition: 63Cu 69.1% +/- 0.05% and 65Cu 30.9 % +/- 0.05% - Chemical purity: 99.9998 % (based on the determinated impurities Al, Cd, Fe, Mg, Mo, Ni, Sb, Ti, Zn) - Particle size (granulometry SEM): between 2 �¼m and 10 �¼m Origin: non sanctioned country Total quantity: 2,000.00 kg MOQ / Minimum order quantity: 80.00 kg Packaged under Argon, 2 kg bottles Location: Germany Availability: Currently available Price evaluated by IGAS Research: 1,500.00 euro per gram (EXW). The selling price is to be agreed between the parties taking into account the existing references, the dominating tendencies of the market, and the required quantity. If you are interested, you are welcome to send us an offer. Shipping/delivery worldwide on request. Monetization possible (SKR and analysis available).
Titanium Dioxide Rutile Grade LTR102 Application: Widely used in applications of paint and coating, plastic, rubber, ink, chemical fiber and paper making Specification. Quality index LTR102 TiO2 content, %(m/m) 98 Volatile substance (105) % 0.5 Water soluble matter % 0.5 Residue (45m) % 0.1 Tint strength (TCS) 1900 PH (aqueous suspension) 7.0-8.5 Oil absorption g/100g 21 Oil dispersibility (Hegman index) 6.0 Resistivity of water liquid extract cm 60 Dry powder L value 97.0 Dry powder b value 2.0 1 Sample for color, tint strength are selected by Long Teng or agreed by customer. 2 Sample for tint strength is selected by Long Teng. 3 Specifications which need negotiating are not within the scope of routine test, except that customer requires. Production scale and technology of Titanium Dioxide Rutile Grade TLR102 are top-ranked nationwide, it is widely used in applications of paint and coating, plastic, rubber, ink, chemical fiber and paper making, product quality conforms to GB/1706-2006 standard. Package: Plastic woven bag, paper and plastic woven bag: 25kgs/bag, 500kgs/bag, 1000kgs/bag.
Primary Aluminum Ingots A7 in large volumes on a long term basis directly from a manufacturer. Delivery terms: FOB Vladivostok, Tianjin or Qingdao. CIF ASWP addressed individually as per buyer's request. Volume: up to 50,000 mt/m Payment terms: T/T or DLC (T/T is wired after contract signing and PPOP documents submitted bank to bank; DLC issued after contact signing and PPOP documents submitted bank to bank, released in loading port after signing of bill of lading and successful Q&Q inspection).
Place of Origin Hubei, China Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Brand Name Linkage Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
VMIVME-7750 IC695CPE330 IS230TNDSH2A IS200TDBSH2ACC IS220PDOAH1A IS220PDIOH1A DS200TCQCG1AJD 04220FL11232A VMIVME-2170A VMIVME-4150 VMIVME-5576 VMIVME-7698 V7768-320000 3509301007768-320000B IS420UCSBS1A IS200AEPAH1BKE IS215WEPAH2BB IS210BPPCH1AD IS210BPPCH1AEC IS2020RKPSG3A IS400JPDHG1ABB IS410JPDHG1A 531X121PCRALG1 VMIVME-4150 IC693DSM302-AE VME7865RC V7865-23003 350-9300007865-230003 M IS410STAIS2A IS400STAIS2AED IS420YAICS1B IS410SRLYS2A IS400SRLYS2ABB IS420YDOAS1B IS420UCSCS2A-B-V0.1-A IS410STCIS2A IS400STCIS2AFF DS200DCFBG2BNC DS200DCFBG1BNC IC200PWR012D 04240FD11234A IS200TREGH1BDB HYDRAN M2 IS200VPROH2B IS200VPROH1BEF IS200VPWRH1AHD VME5565 VMIVME-5565-11000 332-015565-110000 P IS430SNUAH1A VMIVME-7807 VMIVME-017807-414001 350-0001007807-414001 D
Item: Men's Thobe - Soft and comfortable, stylish and flowing material, no ironing needed. Material: 90% Cotton, 10% Polyester Colors: Black, White, Navy Blue, Dark Brown, Olive, Cream, and Baby Blue. Sizes: M, L, X, XXL Pockets: One front, two generous side. Collar: Banded (Saudi) or No (UAE Kandoora style) Fancy chit buttons Customization available for additional price. Each piece will be packed professionally in poly. Big and Tall sizes available for USA and EU markets. Sample price: $15 plus shipping anywhere. Please contact for size chart and other details.
FJ and FDJ (bisect) series stirrer is no standard product developed and produced by our company.Agitator folded has following properties:shaft,radius and loop branch.Strengthen several-layer branch to make front end of paddle had stronger backset and to raise mixture efficiency.It is used to mill no even system liquid whose viscosity is 15000 centipoises (CP) ,and density is 2000 KG/M to keep solid and fibermatter to float floating state. Flow state:In addition to the oblique blade paddle type of axial shunt,radial distribution and nular shunt,but also strengthen the multi-layer shunt,so that the blade front has a strong vortex.
Everflon Fluoropolymer PTFE Micropowder Everflon PTFE (polytetrafluoroethylene) fluoroadditives are finely divided white powders of (PTFE) resin. They are typically added in small quantities to other solid or liquid materials to improve abrasion resistance and lubricity. They are a separate and distinctive product line, very different from standard Everflon PTFE molding and extrusion resins. The differences include a lower molecular weight, smaller particle sizes (2 to 20 m) and different particle shapes. Everflon fluoroadditive powders are designed primarily for use as minority components in mixtures with other solid or liquid materials. Even in small quantities, they can impart some of the high performance properties of PTFE to various host materials.