Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Composite Insulator for Sale Composite insulator is a special type of insulator composed of high-strength fiberglass rods and polyester resin impregnated materials. The advantage of this kind of insulator is that it has excellent high temperature resistance, corrosion resistance and anti-aging properties, which can effectively improve the safety and reliability of transmission lines. At the same time, composite insulators are light in weight, small in size, easy to install and maintain, and can effectively reduce the operating costs of transmission lines. In addition, the mechanical and electrical properties of composite insulators are superior to traditional porcelain insulators, which can effectively improve the safety and reliability of transmission lines. Features of Composite Insulator A composite insulator, also called a dielectric or nonconductor, is a material that resists the flow of electric current. This type of silicone rubber material is used in parts of electrical equipment intended to support or separate electrical conductors without passing current through itself. The term is also used more specifically to refer to insulating supports that attach electric power transmission wires to utility poles or pylons. Composite insulators are less costly, lighter in weight, and have excellent hydrophobic capability. This combination makes them ideal for service in polluted areas. However, these materials do not yet have the long-term proven service life of glass and porcelain.
IFE Machine Room Passenger Elevator List METIS-CR1 METIS-CR1 mr passenger elevator is a new generation product developed by IFE for the residential, office building and hotel market, highlighting the product concept of safety, comfort, energy saving and environmental protection, efficient service and high configuration. METIS-CR METIS-CR is a machine room product tailored by lift elevator for overseas residential, office building and hotel markets. METIS-CR Passenger Elevators are higher than Malaysian and domestic standards. METIS-CR Passenger Elevators Why Choose IFE Machine Room Passenger Elevator? Humanistic technology, safe and direct The MR passenger elevator's diameter of the wheel rope is 25% higher than the national standard, the service life of the steel wire rope is extended by 2 times, and the strength test of the landing door is higher than the national standard. Comfortable experience, energy saving and low consumption The electromagnetic compatibility emc standard certified by the eu ce authority. Safe and reliable Through a variety of product configurations and R&D technologies, the safe operation of the elevator is fully guaranteed, bringing passengers a safer and more reliable experience.
1. Screen size: 15.6 inches (IPS display), resolution: 3840*2160(UHD) 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut and IPS high-definition screen.It also has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience:with 16384 pressure level, the pen draws different lines and different inclination to make the painting more rich. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 4.High light transmission toughened glass design, seamless fit, which can restore colors and precise positioning. 5.Convenience: 8 user-defined shortcut keys on both side is designed for both left-right handed users; No need for battery or charging, support natural tilt of plus or minus 60°; Batter-free pen needs no wire and charge. 6.Comfort:The adjustable and foldable stand has two angles that can be adjusted 60°(55°~60°)/30°(25°~30°), which can create a comfortable angle, everyone can find their best angle.
1. Screen size: 15.6 inches (IPS display), resolution: 1920*1080 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut and IPS high-definition screen.It also has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience:with 16384 pressure level, the pen draws different lines and different inclination to make the painting more rich. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 4.High light transmission toughened glass design, seamless fit, which can restore colors and precise positioning. 5.Convenience: 8 user-defined shortcut keys on both side is designed for both left-right handed users; No need for battery or charging, support natural tilt of plus or minus 60°; Batter-free pen needs no wire and charge. 6.Comfort:The adjustable and foldable stand has two angles that can be adjusted 60°(55°~60°)/30°25°~30°), which can create a comfortable angle, everyone can find their best angle.
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Straight from Kazakhstan. Shipped Worldwide. Quantity: Million BBLS / 4 Million BBLS with possible rolls and extensions. Loading Ports: FOB Rotterdam / Tank to Vessel (TTV) Origin : Kazakhstan Price: Gross USD $80 BBL/ Net USD $76 BBLS Contract Term: Spot and roll over to 12 months contract Paymemt Methods: MT103, TT wire transfer. Inspection by: SGS or equivalent. Currency: U.S.A. Currency. 1. Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Iinvoice (C.1.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.1., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter signed copies of the C.1 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents:- Fresh SGS Report (Not older than 72 hours);
Straight from Kazakhstan. Shipped Worldwide. Products Grade: EN590 10 PPM Loading Ports: FOB Rotterdam Origin: Kazakhstan Quantity: 100,000 MT / 200,000M with possible rolls and extensions Price: Gross USD $790 per MT / Net USD $780 per MT Contract Term: Spot and roll over to 12 months contract Payment Terms: MT103, TT wire transfer Inspection by: SGS or equivalent Currency: U.S.A. Dollars. APPROVED FOB DELIVERY PROCEDURE 1. Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.l.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the full POP documents:
Heat shrink tubing can combine various properties in a unique way Taken together, include: outstanding electrical characteristics, excellent Chemical and solvent resistance, high purity, lubricity and penetration Out of reliability. The double-layer fluoropolymer PTFE/FEP tube consists of a PTFE heat shrinkable outer layer and an FEP inner layer It is widely used and can be used with wires, cables, connectors, connectors, terminals, etc Tightly combined, with the role of moisture-proof. When the covered part is heated, PTFE contracts tightly onto the inlay while FEP melts and flows onto a solid or near-solid package, forming an extremely tight bond that can withstand maximum extension or vibration stress. double layer heat shrink tube has all the electricity of PTFE Gas, chemical and mechanical properties. Operating temperature up to 230 degrees. Our roll shrouds extend the life of the roll, enhance reliability and enhance the quality of the product. A little heat can be applied to the roll to form a layer of high strength, armor like a strong sheath, which protects the roll from chemical solvents, acids, shocks, wear, heat and moisture. It also eliminates the problem of viscous accumulation. During processing, only a convenient heat source, such as a heat gun, can be quickly and easily condensed onto the roll surface, and can be cleaned with solvents or reagents.
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
The 10KA MCB features an elegant and distinctive design, offering dual protection against both short-circuits and overloads. Feature of JVM66-63-C 10ka MCB Notable for its fine and distinctive appearance. Provides dual protection against both short-circuits and overloads. Boasts an impressive high-breaking capacity of 10KA, surpassing similar products worldwide. Features a distinct label and a transparent window for added convenience. Offers a convenient and dependable installation method. Specification of JVM66-63-C 10ka MCB Model: JVM66-63-CPole No.:1P, 2P, 3P, 4P Rated current:1,2,3,4,6, 10,13,16ï¼?20,25,32,40,50,63ARated working voltage:240/415V Rated frequency: 50/60Hz Rated frequency (miniature circuit breaker):400VCurve (miniature circuit breaker):B,C,D High short-circuit breaking capacity:10000A(10KA) lnstantaneous tripping current:5In (B type)10In (C type) 20In (D type) Instantaneous non-tripping current:3In (B type) 5In(C type)10ln(D type)Mechanical life:10000 times Degree of protection: IP20wiring mode:Front wiring Connecting conductor:Up to and including 16m2Wiring height:21.5mm
Iron Bracket LED Single Tube Batten Light This single tube batten light can replace the old fluorescent tube light. The tubes of this emergency tube luminaire  adopts integrated led light source and  bridge wiring design, it's  more energy-efficient and  safety. The small separate plate designed with sliding and plug-in typy connection, make the installation more easier of this single tube  emergency luminaire. The safety hooks of the Waterproof LED single tube  Light, it's convenient to install and maintain. Lamp Luminous Efficiency(lm/w):110 IP Rating:IP20 Warranty(Year):5-Year Place of Origin:Guangdong, China Color Temperature(CCT):6000K Color Rendering Index(Ra):83 Support Dimmer:NO Lifespan (hours):50000 Working Time (hours):50000 Product Weight(kg):2.92 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JTBLP18-4FT-CE Brand Name:comled Input Voltage(V):AC100-277V Working Lifetime(Hour):50000 Lamp Luminous Flux(lm):3960 Length:4ft Application:Warehouse
Everflon+ Fluoropolymers Color Masterbatch Reap the benefits of excellent pigment dispersion in your final polymer mix with Everflon+ masterbatch formulations for fluoropolymers. Pigment concentration and viscosity can be tailored to your specific application, and formulations are suitable for end-products with wall thicknesses that are as thin as one millimeter or 25 microns. Whether you are producing wire insulation or jacketing, film, tubing and profile shapes or injection molded parts, speak to our team of experts to find the right solution for your needs. Colorants are based on specific high-performance resins from Everflon FEP, PFA and ETFE. When manufacturing our color batches, the color pigments are placed at a high concentration within fluoropolymer. Our customers use this color concentrate in a ratio of 5 10% to the basis polymer. already colored according to customer specifications. We can customize our color masterbatches to make them work on the basis of the desired raw material type or according to the requirements of the final product. If, for technical reasons, a color masterbatch cannot be used, we offer a ready-to-run material that is
Everflon Fluoropolymer PFA Resin Everflon PFA is a perfluoroalkoxy copolymer resin available in pellet or powder. Everflon PFA combines the processing ease of conventional thermoplastic resins with the excellent properties of Everflon polytetrafluoroethylene (PTFE). Products manufactured from Everflon PFA can offer continuous service temperatures up to 260°C (500°F). What's more, Everflon PFA provides superior creep resistance at high temperatures, excellent low-temperature toughness, and exceptional flame resistance. Application Wire insulation, fittings, tubing, filtration housings, wafer carriers, pump housings, valve bodies, heat exchangers and other end use components requiring a high performance fluoroplastic material. Processing Everflon PFA can be processed by conventional melt extrusion, and by injection, compression, transfer, and blow molding processes. High melt strength and heat stability permit the use of relatively large die openings and high temperature draw-down techniques that increase production rates. Reciprocating screw injection molding machines are preferred. Corrosion-resistant metals should be used in contact with molten fluoroplastic resin. Extruder barrel should be long, relative to diameter, to provide residence time for heating the resin to approximately 390 °C (730 °F). For more detailed processing information, including recommend
Office LED Lighting Luminaire with multi modules design easy for DIY This Office LED Lighting Luminaire is easy for installation, direct plug-in power supply method is easy to wiring, and this LED Linear Lighting Batten Fixture adopts stainless steel base and high-grade PC diffuser, so that the waterproof rating of this LED Lighting Luminaire can achieve IP65. This Office LED Lighting Luminaire has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this LED Linear Lighting Fixture can achieve 125lm/w. Multi function modules can be replaced, itâ??s more convenient for using multi function through one linear LED Linear Lighting Batten Fixture. Lamp Luminous Efficiency(lm/w):125 Warranty(Year): 5-Year Type :Office LED Batten Light Application:Corridor, Office Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Model Number:ZL-MBLP36-4FT-DN Color Temperature(CCT) :6500K Input Voltage(V):200-240V AC Color Rendering Index(Ra):83 Support Dimmer:Yes Lifespan (hours):54000 Working Time (hours):54000 Product Weight kg :3.1
IP66 IK10 vapor proof LED linear luminaire with openable knob design easy for installation The end cover of the Vapor Proof Batten Light with quick connected terminal block, is easy for wiring; The Corrosion-resistant Batten Fixtures source adopts SMD2835 chips can achieve a high lumen out put; The transmittance of this Sensor Dimming Batten Lights high up to 88%, can achieve a high luminous efficiency; The vapor proof rating of this Sensor Dimming Batten Light is IP66, and it adopts high-grade aluminum heat sink and anti-UV PC housing, it's more durable. Lamp Luminous Efficiency(lm/w): 130 Warranty(Year):3-Year Application: Warehouse, Other attributes Lighting solutions service: Lighting and circuitry design, DIALux evo layout, auto CAD layout Model Number: ZL-KSBLP44-5FT-DS Color Temperature(CCT): 4500K Input Voltage(V): AC 200-240V Color Rendering Index(Ra): 80 Support Dimmer: Yes Lifespan (hours): 64000 Working Time (hours): 64000 IP Rate: IP66 Material: PC + PC
Waterproof Batten Fixture with Small Separate Fixed Plate emergency waterproof linear batten luminaires This emergency waterproof batten fixtures designed with high quality construction, white coating steel body and high transmission Polycarbonate diffuser. The intensity of this waterproof batten fixture is more high, and the protection rating is IP20. This emergency LED linear batten luminaires incorporating SMD LED technology to achieve a high lumen out put, impact resistant and reduce glares. The huge terminal block of this emergency waterproof batten luminaires is easy for wiring. The safety hooks design of this Waterproof LED batten fixtures is easy for installation. Lamp Luminous Efficiency(lm/w):110 IP Rating:IP20 Warranty(Year):3-Year Place of Origin:Guangdong, China Color Temperature(CCT):6500K Color Rendering Index(Ra):80 Support Dimmer:Yes Lifespan (hours):70000 Working Time (hours):70000 Product Weight(kg):2.3 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JSBLP18-2FT-CES Brand Name:comled Input Voltage(V):AC 100V or 220V( �± 10%) Working Lifetime(Hour):70000 Length:2ft Application:Warehouse Material:Iron+PC
PC diffuser double tube LED linear lighting fixture high lumen led iron bracket fixture This double tube LED linear lighting fixture can replace the old fluorescent tubes light fitting. The tubes of this double tube LED linear lighting fixture adopts bridge wiring design, it's more safety. The small separate plate design of this double tubes led iron bracket fixture can make installation more easier. The safety hooks of the light fitting, it's convenient to install and maintain. Lamp Luminous Efficiency(lm/w):120 IP Rating:IP20 Warranty(Year):3-Year Place of Origin:Guangdong, China Color Temperature(CCT):6000K Color Rendering Index(Ra):83 Support Dimmer:NO Lifespan (hours):70000 Working Time (hours):70000 Product Weight(kg):2.92 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JTBLP18-2FT-CN Brand Name:comled Input Voltage(V):AC100-277V Working Lifetime(Hour):50000 Lamp Luminous Flux(lm):2340 Length:2ft Application:Warehouse Material:Iron+PC
This led linear lights adopts high-grade aluminum heat sink and anti-UV PC housing. Waterproof rating IP66 led batten light adopt high transmittance(88%) PC diffuser. 210lm/w LED chip as the lighting source of the linear fixture achieve higher lumen out put. This batten light also adopts high efficiency flicker free driver, no glare. LED linear light with knob type end cap and quick wiring terminal block for easy installation. Lamp Luminous Efficiency(lm/w): 110 Warranty(Year):3-Year Application: Warehouse, Other attributes Lighting solutions service: Lighting and circuitry design, DIALux evo layout, auto CAD layout Model Number: ZL-KSBLP36-4FT-CN Color Temperature(CCT): 4500K Input Voltage(V): AC 200-240V Color Rendering Index(Ra): 80 Support Dimmer: NO Lifespan (hours): 54000 Working Time (hours): 54000 Product Weight(kg): 1.42 IP Rate: IP66 Material: PC + PC Length: 4ft
Linear Lighting LED Batten Fixture with easy installation design This LED Batten Fixtures designed with high quality construction, white coating steel body and high transmission Polycarbonate diffuser. The intensity of this LED Batten Fixtures is more high, and the protection rating is IP20. This Linear Lighting LED Batten incorporating SMD LED technology to achieve a high lumen out put, impact resistant and reduce glares. The huge terminal block of this Linear Lighting LED Batten is easy for wiring. The safety hooks design of this Linear Lighting LED Batten is easy for installation. Lamp Luminous Efficiency(lm/w):135 IP Rating:IP20 Warranty(Year):5-Year Place of Origin:Guangdong, China Color Temperature(CCT):5500K Color Rendering Index(Ra):83 Support Dimmer:NO Lifespan (hours):50000 Working Time (hours):50000 Product Weight(kg):3.16 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JSBLP36-4FT-CN Brand Name:comled Input Voltage(V):AC 100V or 220V( �± 10%) Working Lifetime(Hour):55000 Length:4ft Application:Warehouse, Corridor, Garage, School Material:Iron+PC
