Application : Solar cables are intented for use in photovoltaic power supply systems and similar applications as free hanging, movable, fixed installation and buried in ground in constructional covered systems. The cables can be used indoor, outdoor, in hazard explosion areas, in industry and agriculture. They are suitable for applications in equipment with protective insulation (protecting Class 2). Standards : Adapted to PV systems, 2 Pfg 1169 / 08.2007 and EN 50618:2015. Voltage Rating : AC 0.6 / 1.0 kV Max. PV - System Voltage : DC up to 2.0 kV possible Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV Test Voltage : AC 6 kV / DC 10 kV (15 min.) Construction : Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5. Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation. Core Identification : Red, black or natural Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation. Cable Colour : Black
Application : Solar cables are intented for use in photovoltaic power supply systems and similar applications as free hanging, movable, fixed installation and buried in ground in constructional covered systems. The cables can be used indoor, outdoor, in hazard explosion areas, in industry and agriculture. They are suitable for applications in equipment with protective insulation (protecting Class 2). Standards : Adapted to PV systems, 2 Pfg 1169 / 08.2007 and EN 50618:2015. Voltage Rating : AC 0.6 / 1.0 kV Max. PV - System Voltage : DC up to 2.0 kV possible Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV Test Voltage : AC 6 kV / DC 10 kV (15 min.) Construction : Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5. Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation. Core Identification : Red, black or natural Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation.
Drip Irrigation Fertilizer - NPK fertilizer blended LION 18-18-18 16-08-24 20-10-20 15-30-15 3-5-40 20-20-20 15-5-30 Nitrogen (N) 18 16 20 15 3 20 15 Nitrate Nitrogen (N) - - - - - 2,8 6,4 Amonium Nitrogen 3,5 3 4 5,8 1,5 1 3,8 Urea Nitrogen 14,5 13 16 9,2 1,5 16,2 4,8 P2O5 18 8 10 30 5 20 5 K2O 18 24 20 15 40 20 30 Boron (B) 0,01 0,01 0,01 0,01 0,01 0,01 0,01 Copper (Cu) Edta 0,01 0,01 0,01 0,01 0,01 0,01 0,01 Iron (Fe) Edta 0,04 0,04 0,04 0,04 0,04 0,04 0,04 Manganese (Mn) 0,01 0,01 0,01 0,01 0,01 0,01 0,01 Zinc (Zn) Edta 0,03 0,03 0,03 0,03 0,03 0,03 0,03
Nascent Pipe & Tubes is associated with offering an extraordinary gathering of Treated Steel 904L Flanges as a Manufacturer, exporter, stockiest and supplier to our family and in general clients. 904L Hardened Steel Flanges joins molybdenum and copper with iron for hugely stretched out solidness to decreasing acids like sulphuric damaging. It faces an uncommon degree well to chlorides in the earth for low pitting and opening disintegration, similarly as stress utilization parting. SS 904L Flanges Specifications: Grade SS 904L(UNS N08904) Werkstoff Nr 904L / 1.4539 Dimension Std. ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings Specification ASTM A182 / A240 & ASME SA182 / SA240 Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc. Specification ASTM A182 / A240, ASME SA182 / SA240 Size 1/2NB 48 NB Pressure DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160, etc Class 150#, 300#, 600#, 900#, 1500#, 2500#, etc
Nascent Pipe & Tubes is associated with offering an extraordinary gathering of Treated Steel 904L Flanges as a Manufacturer, exporter, stockiest and supplier to our family and in general clients. 904L Hardened Steel Flanges joins molybdenum and copper with iron for hugely stretched out solidness to decreasing acids like sulphuric damaging. It faces an uncommon degree well to chlorides in the earth for low pitting and opening disintegration, similarly as stress utilization parting. SS 904L Flanges Specifications: Grade SS 904L(UNS N08904) Werkstoff Nr 904L / 1.4539 Dimension Std. ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings Specification ASTM A182 / A240 & ASME SA182 / SA240 Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc. Specification ASTM A182 / A240, ASME SA182 / SA240 Size 1/2 NB 48 NB Pressure DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160, etc Class 150#, 300#, 600#, 900#, 1500#, 2500#, etc
4pole copper wire motor, low speed, hightorque, light sound, strong load capacity, and stable operation. Double packing water seal with springautomatic gap compensation, effectively preventing water leakage. Durable shockproof pressure gauge, withreal-time visibility of working pressure. Precision machined stainless steel body,corrosion and impact resistant. Pressure regulating valve, which can adjustthe outlet pressure according to demand. The combined electric control system withleakage protection function is safer to use. The motor pump coupling is interconnectedto compensate for installation deviation between shafts, absorb equipment vibrationand buffer load impact. Ceramic tube plunger with self lubricationto prevent wear. Pagoda style dual filtration with waterinlet filtration bottle, with a total of 3 filtration protections. Standard fittingï¼? Ceramicwater gun 15meters explosion-proof pressure resistant steel wire high pressure pipe 2.2minlet pipe + filter Multi-anglenozzle
Technical parameter Model: BENCHI1180 Specification: 80 kg 10 L Flow rate: 10L/min 3Pressure: 80Bar Temperature: 100 degrees Fuel consumption: 4L/h Power supply: AC220V Motor power: 2KW Volume: 750*560*610 (mm) Weight: 80KG Design features: 1 Industrial Plunger pump , stable performance, durable; 2 The steel frame is strong and reliable; Can run continuously for a long time; 3 compactness and beautiful shape design, simple operation, intuitive display; 4 Copper pump head, overflow protection, non-polar pressure regulation, high precision filtration of inlet water; 5 This machine adopts diesel heating mode 6 Special heating plate design, fast heating speed, high efficiency. 7 Efficient fuel oil heating furnace, ensure continuous hot water supply, automatic heating control; 8 Water shortage heating automatic closing function;
Eslimi model Minakari plate, with box, has one of the arts of people in Isfahan. Enamel art is a work of art with a history of about 5,000 years that has been used to beautify various ornaments and utensils. This art is a combination of fire and soil that blends with the art of painting to create beautiful designs. Absolutely Unique Minakari Decorative Plate HC-562 This enamel plate is painted in several stages and placed in the oven to reach the supply stage. Decorating metals, especially precious and semi-precious metals such as copper with enamel paints, are called "Minakari" or "Enameling" or "Miniature on fire". In general, enamel handicraft is the art of soil and fire, which is work on metal with bright colors. The history of this art dates back to 1500 years ago and Isfahan is considered the cradle of this art. Enamel is more prominent in Iran than anywhere else, and the oldest examples of this art in museums around the world have been made by Iranians. This beautiful plate can bring a view of Iranian art to your home or workplace.
Electronic Water Conditioner (EWC) uses a series of controlled complex modulating high frequency waveform that neutralizes the bonding ability of minerals that are contained in our water. This field effectively agitates different size molecules likely to form scale & to break the bonds between molecules and the water. This results the breakdown of large mineral crystals into tiny mineral particles & then prevent them from reacting with other minerals or bonding to any surface to from scales. The process is so effective that existing scales are progressively broken own & flushed away in due course of time. The conditioned gaseous ions results in noncorrosive & better tasting water. It also helps the plants to grow well & healthy. Features: Fit & forget maintenance free. No salt or chemicals needed. No maintenance, easy to install. Mains pressure and flow rate unaffected. Retains healthy minerals. Little space required and safe. Low running cost, negligible. Power consumption. Effective on RPVE, UPVC, CPVC, COPPER, BRASS, SS 304, SS316. No waste water.
Ammonium polyphosphate is an inorganic salt of polyphosphoric acid and ammonia containing both chains and possibly branching. Its chemical formula is [NH4 PO3]n(OH)2 showing that each monomer consists of an orthophosphate radical of a phosphorus atom with three oxygens and one negative charge neutralized by an ammonium cation leaving two bonds free to polymerize. In the branched cases some monomers are missing the ammonium anion and instead link to three other monomers. The properties of ammonium polyphosphate depend on the number of monomers in each molecule and to a degree on how often it branches. Shorter chains (n1000),[1] but short polymer chains (e.g. pyro-, tripoly-, and tetrapoly-) are more soluble and show increasing solubility with increasing chain length. Ammonium polyphosphate can be prepared by reacting concentrated phosphoric acid with ammonia. However, iron and aluminum impurities, soluble in concentrated phosphoric acid, form gelatinous precipitates or "sludges" in ammonium polyphosphate at pH between 5 and 7.[3] Other metal impurities such as copper, chromium, magnesium, and zinc form granular precipitates.[4] However, depending on the degree of polymerization, ammonium polyphosphate can act as a chelating agent to keep certain metal ions dissolved in solution.
Arm seal kit also know as arm cylinder seal kit.The china arm seal kit introduce know is used on the arm hydraulic cylinder of excavator,Mainly used to prevent hydraulic oil leakage and ensure that the middle arm can be used normally. Types of Arm Cylinder Seal Kit 14512950 14589140 Arm Cylinder Seal Kit Fits EC360 Excavator 707-99-67110 Arm Cylinder Seal Kit Fits PC300-5 Excavator Why Choose Sanping Arm Cylinder Seal Kit? Versatility: Arm cylinder seal kits are available in a variety of sizes and shapes, allowing them to be used in a variety of applications. Cost: Arm cylinder seal kits are generally less expensive than other sealing solutions, making them a more affordable option. Maintenance: Arm cylinder seal kits are easy to maintain, increasing the life of the seal. Arm Cylinder Seal Kit FAQs How Does Arm Cylinder Seal Kit Work? Air arms s410 seal kit are composed of two main components: the seal itself and the seal housing. The seal is made from a rubber material and is usually shaped in an oval or circular shape. The seal housing is a metal cylinder that is attached to the arm or shaft of the device. When the arm is turned, the seal is compressed against the sides of the housing, creating a seal that prevents air, liquids, or other materials from entering or leaking out. The seal also prevents dirt, dust, and other particles from entering the device. What is a Cylinder Seal Kit? A cylinder seal kit is a set of seals that are used to seal the connection between the cylinder and the piston in an engine or other mechanical apparatus. If you are looking for a reliable arm seal kit factory, don't hesitate to contact us! Contact us to buy china machinery spare parts.
Minor Metals Non-ferrous metals are divided into basic metals and minor metals. Minor metals are called minor metals because they are relatively small units. Metal minor types are: Magnesium ingot antimony ingot; Electrolytic manganese. Cadmium ingots and bars; Electrolytic cobalt; Pure bismuth; pure chromium metal; Titanium sponge; Zirconium sponge; Silicon metal; Indium; Calcium; Tungsten bars; Selenium ingot; Potassium; Sodium; Niobium; Vanadium; Hafnium; Gallium. Beryllium. Molybdenum; Metal lithium; Tellurium; Germanium ingots. Rhenium. Metal arsenic. Different Kinds of Minor Metals From HSG 01 Chromium Metal Chromium metal is mainly used in nickel base, cobalt base superalloy, aluminum alloy, titanium alloy, resistance alloy, corrosion resistant alloy, iron base heat resistant alloy and stainless steel production. Industrial production of chromium metal has two kinds, one is thermite chromium, block, silver bright color, metallic luster, containing Cr> 98%, according to the use of impurities have different requirements; The other is electrolytic chromium, sheet, dark brown surface, after hydrogen refining surface bright, containing Cr> 99%. How is Minor Metals Produced and Manufactured? During the minor metals manufacturing from refractory metal suppliers, the main downstream products of rare earths, the main products in the small metal industry, are catalysts, permanent magnets and glass, which account for 21%, 18% and 16% of the demand for rare earths, respectively. The downstream products of tungsten are mainly hard alloy, alloy steel and tungsten, whose demand for tungsten accounts for 52%, 30% and 13% respectively. Molybdenum is mainly used in construction steel, stainless steel, catalyst and chemical industry and tool steel and other fields, among which the former two demand for molybdenum accounted for more than 60% of the total market demand for molybdenum. In addition, antimony is mainly used in flame retardant, tin is mainly used in solder, indium is mainly used in indium tin, and germanium is mainly used in PET, optical fiber and infrared optics, not mainly used in aluminum alloy, casting and steel making desulfurization and other fields.
MAIKE is specialized in the design and manufacture of high-quality customized planar transformers and inductors. The factory is based in Mianyang which is the only National Science & Technology city in China and is strategically placed to service the global electronics market. We design and manufacture for a variety of end-user applications ranging from Welding to Aerospace & Automotive & Battery Charging etc. The planar transformer is a transformer with high frequency, low profile, small height, and high operating frequency. Compared with conventional transformers, the size of the magnetic core of planar transformers is greatly reduced, especially when the height is reduced the most. This feature is very attractive in power supply equipment where space is strictly limited, making it the preferred magnetic component in many power supply equipment. The structural advantages of planar transformers also bring many advantages to its electrical characteristics: high power density, high efficiency, low leakage inductance, good heat dissipation, and low cost. Key Features-- (1) High current density. The wires of a planar transformer are actually planar conductors, so the current density is high. (2) High efficiency. The efficiency can reach 98%~99%. (3) Low leakage inductance. Approximately 0.2% of the primary inductance. (4) Good heat conduction. The hot aisle distance is short and the temperature rise is low. (5) Low EMI radiation. Good core shielding can keep radiation to a very low level. (6) Small size. The use of a small magnetic core can reduce the size accordingly. (7) The parameters have good repeatability. Because the winding structure is fixed and easy to pre-process, the parameters are stable. (8) Wide operating frequency range. The frequency can be from 50kHz to 2MHz. (9) Wide operating temperature range. The working temperature is -40 130. (10) Good insulation. The planar transformer is composed of overlapping conductive circuits and insulating sheets, thereby ensuring up to 4 kV insulation isolation between windings, primary-secondary and secondary-secondary.
SEEDLESS LITCHI from www.fruit-trees-nursery.com/litchi.htm The seedless litchi tree is a new species grown in our nursery garden. They are fertile with steady productivity and all seeds inside the fruits completely fade out. These fruits are able to endure a long time of storage. They are bright red in color without kernels and the average weight can reach 42.6g. Flesh is sweet and crisp with an aroma of honey without astringent taste. It is considered the nonesuch among all kinds of litchis. Seedless litchi A4 is a unique nonesuch litchi species. The exclusive species can bear fruits by self-pollination. In general, 99% of the fruits are seedless with an average weight of 46g and 82.5g to the most. Flesh is thick and crisp in milk white and tastes sweet and balmy with an aroma like honey. The superior quality, wonderful taste and abundant nutrients make it not only a perfect fruit to eat, but also the best material for canned products. (It is not necessary to manually remove the kernels, thus reducing the cost dramatically). The production of seedless litchis has solved the serious problem of unstable yielding phenomenon for litchi varieties and the dream of steady high yield every year finally comes true. The development of seedless litchi trees is a golden market and it can bring considerable economic benefit with boundless prospects! Our suggestions : (1).If you would like to make a fortune by planting fruit trees, why don't you consider the seedless litchi which is unique in the world? What else do you have to worry about if you have what others don't have? (2).If you are doing the business of dried fruits, why don't you consider our dried seedless litchis? The unique products will make you understand that monopoly is profits. (3).If you are doing the business of green seedling, why don't you consider making bonsais of our seedless litchis? The unique and excellent products will bring you the experience of great achievements in your exclusive market.
2, 5-dimethoxy benzaldehyde [Relative molecular weight or atomic weight] 166.18 Molecular structure All benzene C atoms and carbonyl C and O atoms form �? bonds with sp2 hybridized orbitals. Other C and O atoms form sigma bonds with sp3 hybridized orbitals. Melting point ( ) 52 Boiling Point ( ) 146(1333 PA) Character Achromatic crystals. Dissolution conditio Soluble in ethanol, ether. Purpose Used as an organic intermediate. Preparation or source The corresponding hydroxy-methoxy-benzaldehyde was synthesized by methylation with dimethyl sulfate in alkaline water solution. As a professional chemical supplier, Hebei Turin is committed to providing you with high-quality 2,5-Dimethoxybenzaldehyde (CAS 93-02-7). Our products have a purity of over 99%, ensuring that they meet your needs in a variety of applications. Many customers are highly satisfied with the quality of our 2,5-Dimethoxybenzaldehyde products, which stems from our strict selection of raw materials and fine control of the process. If you are looking for a reliable 2,5-Dimethoxybenzaldehyde (CAS 93-02-7) factory, congratulations, you have found the best partner. Not only do we have sufficient inventory, but we also have an annual production capacity of up to 30 tons, ensuring stable supply to meet your long-term needs. We are well aware of the fierce competition in the market, so our 2,5-Dimethoxybenzaldehyde prices are highly competitive. You will get better quality products and more reasonable prices compared to other traders. Want to learn more about our products or make purchasing inquiries? Please feel free to contact our sales manager Tommy Li. Our team will serve you wholeheartedly to ensure you get satisfactory answers and solutions. Don't miss this opportunity to improve your business. Choose Turin, Hebei, and choose excellent quality 2,5-Dimethoxybenzaldehyde (CAS 93-02-7). Contact us now to start your purchasing journey!
PMDETA(N,N,N',N',N"-PENTAMETHYLDIETHYLENETRIAMINE) Description: Appearance:colorless transparent liquid Content: min 99% Water content: max 0.25% CAS NO.: 3030-47-5 HS CODE: 292129 Country of origin: China Annual output: 500 tons PMDETA Applications. PMDETA catalyst is a highly active, pure liquid tertiary amine that is suitable for use as a blowing catalyst in a number of rigid and flexible polyurethane foam applications. ADVANTAGES: In model systems, PMDETA catalyst has proven to have catalytic activity equivalent to other established blowing catalysts for the urea reaction. However, PMDETA catalyst has a greater affect than established blowing catalysts on the urethane or gelling reaction. PMDETA catalyst is very effective in pour-inplace polyurethane systems (such as rigid appliance systems), which are based on MDI. At a use level of 1.5 php, PMDETA catalyst provides the necessary flowability and cure rates required in the production environment. PMDETA catalyst is also recommended for TDI, TDI/MDI and MDI HR flexible molded foams, as well as for use in integral skin and microcellular systems. It can also be as a raw material to make quaternary ammonium salt. PMDETA Physical Parameters PMDETA Basic Information English Name: N,N,N',N',N"-PENTAMETHYLDIETHYLENETRIAMINE CAS Number: 3030-47-5 Appearance: Clear liquid Color/Colour: colorless/colourless Odor/Odour: ammoniacal Formula: C9H23N3 Molecular Weight: 173.3 Synonyms: PMDETA; PMDTA; PMDT; (N,N,N',N',N"-PENTAMETHYLDIETHYLENETRIAMINE), N-[2-(dimethylamino)ethyl]-N,N,N-trimethylethane-1,2-diamine, EINECS: 221-201-1 HS code: 292129 0060 Density: 0.830 g/cm3 Melting Point: -20 °C Boiling Point: 200 °C at 760 mmHg Vapor Pressure: 0.30 mmHg at 21 C Flash point: 77 C Explosion Limits, Lower:1.1 vol % Upper: 5.60 vol %
Key words:Diamond Honing Stone,Honing Stick,Honing head Introduction: Use the high quality of diamond and CBN abrasives from Diamond Innovation. Standard Grit Size from D251,D213,D181,D151,D126,D107,D91,D76, D64,D54,D46,D35,D20,D15. We provide super abrasive diamond and CBN honing stone for honing machines of almost all renowned honing brands. (Sunnen, Nagel, Belden, AccuCut, Engis, and other types of high-production honing equipment).Our diamond and CBN honing stones are available for precision bore finishing. Bond type: Metal Bonded. Specification Introduction of honing stone In principle, the perfect honing stone consists of three different main components, which offer the required cutting. Abrasive The abrasive is the most important component of each honing stone. Synthetic diamonds or cubic boron nitride (CBN) in various grit sizes are used. Bond The second component is the metal bonding which is responsible for the proper adhesion of the abrasive crystals warranting excellent wear performance. Steel Blank or Carrier The copper-plated steel blank is the third and last component and is the support material of each honing stone in a drawn, galvanized form. The abrasive and the bond are weighed, mixed, and proportioned according to exactly define operation plans. The premixed portions are then filled into prepared sintering molds and fitted with the appropriate steel blanks. After this, all three elements are sintered under high temperatures. During the sintering process, an abrasive layer develops. Applications of diamond and cbn honing stone materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel,tool steel,die steel,hardened steel copper,aluminum alloy and other abrasive resistant materials. Applicable area:fine grinding engine pump body,hydraulic cylinder bore,hydraulic pump inner bore,cylinder block,valve,oil cylinder nozzle,the inner surface of the spline bore and cylinder hole and blind hole of other series. Applicable honing machine:sunnen,nagel,belden,accucut,engis,and other types of high-production honing equipment. Honing head Honing stones are usually installed on the honing head for work. Various types of vertical honing heads and accessories can be designed and processed according to customer needs or customized according to drawings. Vertical honing head products have high honing accuracy and simple operation. They are divided into manual adjustment and motorized adjustment. The honing range is from 12mm to 300mm honing diameter. Its materials are nickel alloy material, aluminum alloy material, and three kinds of rigid material.
Product Details Description :Gold/Silver/Colored Plain or Embossed Metallic Paper Color: Gold, Silve rRed, Blue,Green,Copper,Fuchsia,Gold,Light Blue and customized Laser color :Red,Fuchsia,Pink,Blue,Green,Golden,Sliver and more colors customized Base Paper Offset Paper, Art Paper,FBB,SBB,Duplex Board, Kraft Paper, Manila board etc. Embossed Pattern Rose, Linen, Ripple, Phoenix tail, Nest, Music, Bark line, Grape Leaf, Small Grid Application Gift packing, printing, handicraft works, packing box, DlY materials,arts & crafts, greeting card, decoration etc.Custom design OEM/ODM Available Specification: Description: Gold/Silver/Colored Plain or Embossed Metallic Paper Color: Gold,Silver,Red,Blue,Green,Copper,Fuchsia,Gold,Light Blue Laser color : Red,Fuchsia,Pink,Blue,Green,Golden,Sliver and more colors customized Base Paper: Offset Paper,Art Paper,FBB,SBB,Duplex Board,Kraft Paper,Manila board etc Embossed Pattern: Rose,Linen,Ripple,Phoenix tail,Nest,Music,Bark line,Grape Leaf,Small Grid More than 100 different embossed designs for your select,also can customized Laminating: Aluminum foil,Aluminum film,PET film etc Size: 1.Big Size:70x100cm,50x70cm or customized 2.Small Size:A2,A3,A4,A5,Letter Size,Legal Size GSM: 100g,120g,180g,200g,250g,270g,320g,370g etc Packing: 1.Big size:100/125/200/250 sheets per pack with Kraft paper. 2.Small size:50/100/500 sheets per OPP bag or as per customer requirements Application: Gift packing,printing,handicraft works,packing box,DIY materials, arts&crafts,greeting card,decoration etc. Custom design: OEM/ODM Available Payment terms: L/C,D/A,D/P,T/T,Western Union,Money Gram Delicate white paper with a semi-translucent qualty becomes something special when printed with your design. Tissue paper is the final layer between your client and your product, and sets the expectations high for what will be revealed underneath. We offer gorgeous premium colors for your design such as metallic gold and silver to give a regal feel to your tissue paper. Packing need not be boring plain-custom printed tissue paper is one the most delicate and detailed options you can find.
Supplier of stainless steel bar as per astm/asme sa 182 & sa 479 gr. f304l, 304h, 304ln, 309, 309s, 309h, 310s, 310h, 316, 316l, 316h, 316ln, 317, 317l, 321, 321h, 347, 347h, 348, 348h,17 4ph,13 8mo,15 5ph,xm19(nitronic 50),nitronic 60, 422,(616) etc.duplex bar as per astm/asme sa a479/276/182 uns no: s31803 (f51), s32750 (f53) & s32205 (f60).is 2062 gr. a, b & c.nickel copper alloy rod, bar & wire as per astm/asme sb 164 uns no: n04400 (monel 400) & n04405.nickel chromium iron alloy rod, bar & wire as per astm/asme sb 166 uns no: n06600 (inconel 600).nickel chromium molybednum columbium alloy rod, bar & wire as per astm/asme sb 446uns no:n06625 (inconel 625).nickel alloy forged bar as per astm/asme sb 462 uns no: n08020 (alloy 20 / 20 cb 3).nickel alloy forged bar as per astm/asme sb 564 uns no: n04400 (monel 400), n06600 (inconel 600), n08800 (inconel 800), n06625 (inconel 625), n08825 (inconel 825).
Product Name: Caustic Soda Chemical Name: Sodium Hydroxide Chemical Formula: NaOH CAS Number: 1310-73-2 Description: Caustic Soda, also known as Sodium Hydroxide, is a highly versatile and widely used chemical with strong alkaline properties. It is commonly available in solid form (flakes, pearls, or pellets) and in aqueous solutions. Caustic Soda is essential in numerous industrial processes, including chemical manufacturing, water treatment, and cleaning applications. Appearance: Caustic Soda typically appears as white solid flakes, pellets, or a colorless solution. It is odorless and highly caustic, capable of causing severe chemical burns. Key Features: Strong Alkalinity: Highly effective in neutralizing acids and dissolving organic materials. Versatile Use: Widely used across various industries for its chemical reactivity and cleaning properties. Highly Soluble: Easily dissolves in water, forming a strongly alkaline solution. Efficient Cleaning Agent: Removes grease, oils, fats, and other organic materials efficiently. pH Adjustment: Commonly used for pH regulation in various processes. Applications: Chemical Manufacturing: Production of various chemicals including detergents, soaps, and synthetic fabrics. Manufacture of paper and pulp. Production of aluminum through the Bayer process. Water Treatment: pH adjustment and water purification. Removal of heavy metals and other contaminants. Textile Industry: Textile processing and dyeing. Mercerization of cotton. Cleaning and Detergents: Industrial cleaning agents. Household drain cleaners. Food Industry: Food processing and preparation. Used in peeling fruits and vegetables, processing cocoa and chocolate, and making caramel. Technical Specifications: Purity: 99% min Sodium Carbonate: 0.5% Sodium Chloride: 0.03% Iron Content: 20 ppm Appearance: White solid (flakes/pearls) or colorless solution Packaging: Caustic Soda is available in various packaging options to meet customer needs: 25 kg HDPE Bags with inner lining 50 kg HDPE Bags with inner lining 250 kg Drums Bulk packaging and customized packaging options available on request Storage and Handling: Store in a cool, dry, and well-ventilated area away from moisture and incompatible materials such as acids. Ensure containers are tightly closed when not in use. Handle with care using appropriate personal protective equipment (PPE) to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, OSHA, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.