Product Specifications Product : Desiccated Coconut Grade : High Fat Medium Scope : This standard applies to the desiccated coconut product sold by PT Agrostar Andalan Nusantara A. Physical 1. Colour : Natural white, free from yellow specs ot other discolourations 2. Flavour/Odor (F/O) : Mild and sweet characteristics of coconut, free of foreign F/O 3. Size : Fine granules of coconut 4. Granulation : No. Of sieves (ASTM) % Ratained On Mesh 6 : 0 Mesh 10 : 2 - 13 maximum Mesh 12.14 : 43 -71 maximum Mesh 16.20 : 20 - 46 maximum Pan : 1 - 6 maximum B. Chemical 1. Moisture Content, % : 3.0 maximum 2. Total Fat (Dry Basis), % : 63 - 68 3. Free Fatty Acid (as lauric) dry basis, % : 0.10 maximum 4. Residual SO2, ppm : Free/50 ppm max 5. pH (10% dispersion filtrate) : 6.1 to 6.7 6. Total Aflatoxins, ppb (DL : 4 ppb) : Not Detected 7. Organiphosphorus Pesticide residues, ppm (DL : 0,1 ppm) : None Detected C. Microbiological 1. Total Plate Count, cfu/g : 5,000 cfu/gram maximum 2. Yeast : 50 cfu/gram maximum 3. Moulds : 100 cfu/gram maximum 4. Enterobacteriaceae 100 :50 cfu/gram maximum 5. E. Coli (Type I) : Negative/10 grams 6. Salmonella : Negative/50 grams D. Ingredient List Raw Coconuts E. Packaging and Packing Size Standard Packing : 25 kg Polyethylene-lined 3 ply kraft paper bags Optional Packing : 10 kg, 50 kg, 50 lbs, 100 lbs Depending on customer's requirements. F. Storage Condition Recommended storage between 50oF -60oF (10-15.5oC) and 50%-60% relative humidity in clean odour free area and away from wall where coconut products will keep for 12 months. Avoid storage in high moisture area.
PRODUCT SPECIFICATIONS Product : Desiccated Coconut Grade : Low Fat Fine Scope : This standard applies to the desiccated coconut product sold by PT Agrostar Andalan Nusantara A. Physical 1. Colour : Natural white, free from yellow specs ot other discolourations 2. Flavour/Odor : Mild and sweet characteristics of coconut 3. Size : Fine granules of coconut 4. Granulation : No. Of sieves (ASTM) % Ratained On Mesh 7 (2.8 mm) : 0 - 0 Mesh 14 (1.4 mm) : 10 maximum Mesh 18 (1.0 mm) : 30 maximum Pan : 65 - 80 B. Chemical 1. Moisture Content, % : 4.0 maximum 2. Total Fat (Dry Basis), % : 50 +5 3. Free Fatty Acid (as lauric) dry basis, % : 0.10 maximum 4. Residual SO2, ppm :
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates. Products Property: No any Binder, good compatible with Multi-Resin Optimal mechanical performance Easy workability and low cost Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm Standard Roll weight: 45/48/60kg Packaging: Each roll is wound on paper tube (3"-4"Dia.) with plastic film and packed in individual cardboard box. 16 or 12 cartons per Pallet. The strength of fiberglass stitched mat is stronger than CSM,the price is cheaper. We export large quantity for pipe winding.We can provide big roll to reduce your replacing frequency and save your cost.We suggest stitched mat instead of chopped strand mat for pipe application. Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical. Binderless chopped E-Glass, stitched at 7 gauge The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Office Partition Aluminum Profile Basic Info Item Office partition aluminum profile Material 6000 series Aluminium Temper T4, T5, T6 Size / Thickness General profiles thickness from 0.8 to 5.0mm, length from 3m-6m or customized available; Anodize protection film thickness from 8~25 um, powder coating from 40 ~ 120 um. Shape Customized Application In furniture, windows&doors, decorations ,industry, construction and so on Surface treatment powder coating, electrophoresis, wood grain , anodized and so on Colors Ref powder coating color sheet and customized color available Deep process CNC, drilling, milling, cutting, welding, bending, assembling MOQ 500kgs for each item Packing Details (1)Inside : packed with plastic protective film to protect each piece (2) Outside: Wrap to be bundles by waterproof craft paper Delivery time (1)Die Developing and Sample testing: 12-18 days . (2) Mass Production completed: 20-30days after sample is confirmed by Buyer. FOB Port SHENZHEN / GUANGZHOU / FOSHAN payment terms T/T 30% for deposit, balance before shipping. settlement term Charge by final actual weight or by drawing theoretical weight. production capacity 5000 tons monthly, 60000 tons annually. Certificate and Standard CQM, SGS, CE, BV, SONCAP / GB, ISO, JIS, AS, NZS, QUALICOAT, QUOLANOD available Guarantee Surface color can be stable for 10~20 years indoor using. Product Gallery Office partition aluminum profile Packaging & Shipping Licenses, Certificaton, QC, QA, and Credit/Honour 1). Licenses 2). Certifications, QA, QC & Credit/Honour a). RoHs GZ0712189216 CHEM b). RoHs GZ0703031520 CHEM c). RoHs GZ0703031521 CHEM e). SGS GZMR09607716 f). SGS CANML0903000702
Cabinet Aluminum Profile Basic Info Item Cabinet aluminum profile Material 6000 series Aluminium Temper T4, T5, T6 Size / Thickness General profiles thickness from 0.8 to 5.0mm, length from 3m-6m or customized available; Anodize protection film thickness from 8~25 um, powder coating from 40 ~ 120 um. Shape Customized Application In furniture, windows&doors, decorations ,industry, construction and so on Surface treatment powder coating, electrophoresis, wood grain , anodized and so on Colors Ref powder coating color sheet and customized color available Deep process CNC, drilling, milling, cutting, welding, bending, assembling MOQ 500kgs for each item Packing Details (1)Inside : packed with plastic protective film to protect each piece (2) Outside: Wrap to be bundles by waterproof craft paper Delivery time (1)Die Developing and Sample testing: 12-18 days . (2) Mass Production completed: 20-30days after sample is confirmed by Buyer. FOB Port SHENZHEN / GUANGZHOU / FOSHAN payment terms T/T 30% for deposit, balance before shipping. settlement term Charge by final actual weight or by drawing theoretical weight. production capacity 5000 tons monthly, 60000 tons annually. Certificate and Standard CQM, SGS, CE, BV, SONCAP / GB, ISO, JIS, AS, NZS, QUALICOAT, QUOLANOD available Guarantee Surface color can be stable for 10~20 years indoor using. Product Gallery Cabinet aluminum profile Packaging & Shipping We have total: *10extrusion line, machine size from 600 to 2500MT; *2 Anodize and 2 Electrophoresis line, imported from Japan and Korea; *1"Thousand ton Grade" colorful powder coating line imported from Germany; *1 Thermal break strip production line imported from Switzerland; *1 Heat transfer wood-grain/ timber production line imported from Korea; And many relative Casting/ Melting, Deep process CNC, windows and doors fabrication machines.
Single Shaft Shredder Introduction: Single shaft shredder is available to recycle wide range of material.It is an ideal machine for plastic, paper, wood, fiber, rubber, organic waste a wide variety of non-metallic materials. As per our customerâ??s requirements, such as the input size of materials. Capacity and the final output size etc. We could work out a suitable proposal for our clients. After being shredder by the machine, the output material could be used directly or go int to the next step of size reduction. With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. The output capability typically range between 300kg/hr â??5,000kg/hr+ depending on the different model and different materials. For thick wall diameter plastic pipes, plastic film, waste injection products, plastic bottles, bags Compact Single shaft shredder combined with great power. Variable adjustable screens to determine the size of the chips Hydraulic feed to ensure constant material flow to the rotor V-belt drive gear reduction through spur gearing Hydraulic unit and hydraulic cylinder suspended by cardanic joints in small or medium-sized companies which attach great importance to an optimum cost -benefit ratio. Our service: (1) Your inquiry related to our products or prices will be replied in 24hours. (2) Our engineer will make machine placement chart according to clientâ??s workshop chart (3) We provide 12 months guarantee since the date of bill of loading. All products are passed strict test.
Specifications of Feed Yeast for Animals 1.Pure alive yeast product 2.enhance animal appetite and feed digestion and absorption ratio 3.decrease bacterial diarrhea Descriptions of Feed Yeast for Animals: Feed Yeast for Animals is a pro-biotic feed additive, produced by using a selected yeast strain of Stomachaches Cerevisiae, adding various nutrient substance and other growth factors, and adopting submerged aerobic fermentation and sterile processing to create the pure and viable yeast product. Active Feed Dry Yeast can enhance animal appetite and feed digestion and absorption ratio; decrease bacteria number in animal excreta and improve breeding environment; adjust microbial flora balance in intestines and stomach, accelerate beneficial bacteria reproduce, and decrease bacterial diarrhea. Functions of Feed Yeast for Animals: 1. Feed Yeast for Animals can enhance animal's appetite and feed digestion as well as absorption ratio; 2. Feed Yeast for Animals can decreased bacterial number in animal excreta and as a result can help improving breeding environment; 3. Feed Yeast for Animals can adjusted microbial flora balance in animal's intestines and stomach, and as a result accelerated the reproduction of beneficial bacteria and decreased bacterial diarrhea. Storage and Packaging: 1. Store in a cool and dry place. 2. Packaging: 10KG carton with vacuum packing and 25KG paper bag with polyethylene liner. 3. Shelf life: 12 months from production date when stored in its original packaging.
NK400E Chassis*FrontThe first piece of steel plate GT550E Universal* LuffingAngle sensor NT75401030806 central tube KIT,ENCODER,1024 PULSE,3/8 SHAFT AY24441 Lock Tab:Pipe Handler F/Tds-9S 107052 35Ã??35 FZ35-35 openSlotted taper end set screw M8*16 JK00309-11 Washer:Lock Star 1/2" Brass F/ Tds 11S 87074-8-B SAVER SUB 5 1/2" 3 1/16" ID, 8 5/8" OD, 7 5/8" REG PIN x XT 54 PIN FOR 5 1/2" XT 54 D/P 3.750" ID 7.87" Turntable input shaft accessories ZJ45 Input shaft outer ring gear Z=44 106.02.30.09 Drill pipe power tong accessories ZQ203 pin 125 0101.06-07 E19-1012-010 HH-0625NC-0575-GR8 WASHER NYLON 86871-50 52816-12-B BUSHING, PIPE REDUC-COM WASHER, SPRING, 12, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-6 WASHER, FLAT 50810-NS 50006-10-C5D SCREW, CAP-HEX HD DRILLED Drilling rig special pneumatic control element overwind valve QY34A Logging tool accessories Modular formation tester MIFT push-to-base 2304017-001 Medium*1 Screw: Cap HEX Head Metric 50067-040F07 Plug,O-Ring .562-18 Thd 87196-6-S Ring Glyd Rotary 13.5" Ph 100 124813 FRICTION DISC W30-07-902 56506-4-6-S ELBOW, 90DEG EXT/37 Screw For Air Winch Fa5A 50006-24-C8D 86547 SCREW,TERMINAL,LINK Drilling rig top drive accessoriesDQ40/DQ50/DQ70 pliers seat 1.14.10.03 Benz 2530 Cooling ElectricDevice* headlight assembly MAN33.430TGA Engine* Fuel Primary Filter 81.12503-0085 Plug:Orifice 1/4"Npt X.071 Mdl:Ps350/500 110844-18 GT550E Universal Safety Hoistroller bearing Disc brake accessories ZJ30C countersunk head screw 000153X0685 WCB324DB Drill pipe power tong accessories ZQ203-100 hydraulic tong full set of fasteners Brake device accessories ZJ-70 Proportional valve R2GA/MA-010/100PA-M 88098 RING, GLYD, ROTARY VFD, DRIVE E12885 Electric sprinkler accessoriesF-1600 cylinder liner gland AH36001-05.18.00 Winch drive shaft accessories ZJ-50 rim 106.04.25.00 Winch drive shaft accessories ZJ-50 bridge sprocket Winch intermediate shaft accessories ZJ-45 Coupling NL2YA19*40/YA20*40 78801 CLAMP,HOSE,2.5-12.25 (PACK OF 5) NK500E engine*intake manifold gasket CONNECTOR POWER BLACK 110022-1B FILTER, CASE, 3/4IN NPTF, 3/4IN SPIN ON H10311 Jonard Pin Insertion tool kit KA-260 PIN, ROLL, 0.25 X 2.50 LG 51604-20-S NK400E fuel oil hairengine throttle cable 35*35 BOP accessoriesFZ35*35RS Y-shaped sealing ring FZ897.1.30 10889-P25 PISTON SEAL Liquid end fittings 75-30TPH400 lock spring P4044200P4044213 Seal : Lip 4.0 0.15Lb F/Top Drive Tds11S 114833 109528-1 Integrated cable D-001-60 Pipeline oil filter (ZU-H25*40BDPHDX 25*40) BK-Z-L3 Nut: Spice Crimp RB44 56612-01 Ordinary nozzle JZS 5-26mm CHANGE VALVE EX-PROOF ELECTROMAGNETIC DHA-0631/2/24DC FOR DISC BRAKE HPU YZ.100S-096 Air Filter, p/n A460-030. 14264-910307 (16061-910319). FLEETGUARD (model UN-746D pump). Type: inner, dimensions: D210 X L655 mm, CUMMINS KTA38 engine
Z07120000063AA Lift cylinder Bearing: Thrust Main, Tapered Roller 2028017 DT50149 CASING WEAR PLATE , 4 �? 3 �? 13 INCH-P/N: G0006074, BRAND : DERRICK Screw 50070-025F06 Cable : Safety For Top Drive Tds11S 110078-L18 59024P170014 HOSE ASSY M11229 141101703 161100349 MAN33.373DFC transmission* oil seal 06.56279-0331 ROLLER, FOR POWER TONG, MODEL: 16-25, MAKE: WEATHERFORD, P/N: 100046-001 Brake device accessories ZJ-40 Manual stop valve LT07MAK-2X/100-02M 110563-11 PLUG, R1 1/2, ROTARY TABLE, ZP 375, HH ZP001.16 GT350E Cooling Appliance*Anti-fog lights Electric control box FKDQ640-7 Explosion-proof alarm BBJ-T DC24V O-Ring (30174447-Lh-Lb) 51300-276-B BUSHING 1-3/4" EP-1000864 transmission no. 2 transmissionShaft accessories ZJ-45 transmission shaft assembly BA70002-12.00 E04-5047-010 LOCKNUT, CONDUIT FTG, 3/4 NPT Drum shaft accessories ZJ70DB nut M16 106.06.20.43 SPLINE. Catalog number: GB1095-1979. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100 S10232 Stuffing box 1.06.15.001 Roller shaft accessories ZJ32L6 axis AF32004-02.03 Nut:Hex-Sltd [Unc-2B] F/Top Drive Tds11S 50506-C hydraulic hose 2.4.21.068 Oil Filter, p/n P551670. DONALDSON Drilling rig top drive device accessories DQ-70BSC flush tube O-ring 5303001830 Hanger accessories F-1600Crosshead lower guide plate AH36001-04.17 MAN33.373DFC Variable Speed Gearbox Output Shaft Bearing 74004 GAUGE, SIGHT, OIL 6600/6800 KELLY VOLVOFM12 lubrication*Oil pan gasket Drill pipe hanger accessories ZQ203-125 tooth plate 19.100-12 Drill pipe tong accessories ZQ203-100 Idler Z=24 m=12 0102-02M ENCODER LOW TEMP, DIGITAL M614003119-BSC 161100259 Relay 24VAC/DC 8NO/1NC PSR-SC INT.SIEM 3VL27121DC330AA0 00A15C001.084 STABING GUIDE ASSEMBLY 118250 Remote Console Accessory FKQ6406 Bottom pipe union ZG 11/2*50MPa (thickened) TEE, SWIVEL INT 37/37/37 56525-6-6-S TUBE ASSEMBLY UNL ADAPTER/MANIFOLD 30125094 35�?35 BOP FH35-35/70 adapter ring inner sealing surface FW1305.11-00 CUTTING FERRULE JOINT, FOR DRAWWORK- HPU, MODEL: YZ096, MAKE: HONGHUA, P/N: 1CH9-26-22OG/RN Drill pipe hanger accessories ZQ203-100 fork head 0104-10M Compensation for other logging tools Sub-lithology density micro-column focused logging tool PEX150-SH Schlumberger Hydraulic cylinder DT11397 Canrig Seal: Rod Proprietary 10858306-001 NK400E Universal Hydrating WaterFlat cylinder hydraulic hose 30119143 GLYD RING ROTARY 11.5ROD Hydraulic tank accessories F-1000 Stem guide (bottom) AH33001-05.24.00 C500K Brake Rear Brake Shoe 811598 On SEAL RING, PISTON FH84.7 Cap Screw,Vc-20X1" Lg Gr5 F/Tds National 50004-08-C5D Winch drive shaft accessories ZJ32L6 gear spline AF32002-10.10 Roller shaft accessories ZJ-45Roller flower nut M30 Elevator drill pipe elevator C DZ 139*139mm 2250 Drilling rig top drive accessoriesDQ70â?¢-A baffle �?47 1.11.11.091 VALVE, COUNTERBALANCE (CBCA-LHN) 30173386 35-35 BOP AccessoriesFZ35-35 gate body fully sealed JK212-40S-1-1
1 Butadiene 1-3, Crude C4, Butene -1 2 Methyl tert-butyl ether (MTBE) 3 Iso-butane (iC4) 4 Ammonia 5 Phtalic - Anhydride 6 Melamine Crystal 7 Methanol 8 Paraxylene 9 Orthoxlyene 10 Mixed Xylene 11 Urea 12 Monoethylene Glycol (MEG) 13 Diethylene Glycol (DEG) 14 Anti-freeze 15 Monopropylene Glycol (Chemical Grade) â?? (MPG) 16 Sodium hypochlorite 17 Caustic soda 18 Paraffin 19 Petroleum jelly (Vaseline) 20 Formaldehyde (formalin) 21 Etoxylated alchole 7 mol 22 PEG 400 Chemical Grade 23 SLES 70 24 LABSA 25 Betaein 26 Oleic Acid 27 Loramide 29 Carbon Black 30 Methyl Ethyl Ketone (MEK) 31 Secondary Butyl Alcohol 32 Toulene Diisocyanate (TDI) 33 Methyl Diisocyanate (MDI) 34 Nitric Acid 35 Chloridric Acid 36 Styrene Monomer 37 Phosphoric acid 38 Sulfuric Acid 39 Diammonium Phosphate 40 Granular Sulfur 41 Ammonium Sulphate 42 Dioctyl Phthalate (DOP) 44 Isobutyl Acetate 45 Triacetin 46 Diethyl Ether 47 Sodium Sulfite 48 Lacquer Nitrocellulose 49 Methyl Acetate 50 N-Butyl Acetate 52 Sodium Metoxide 53 Nitrodor 54 Nitrocellulose (Type A) 55 Diethyl Phthalate 56 Dioctyl Adipate 57 Dioctyl Terephthalate 58 Dioctyl Sebacate 59 Dibutyl Phthalate 60 Dimethyl phthalate 61 Phosphoric Acid 62 Di Calcium Phosphate 63 Phenyl Acetic Acid 64 Ammonium Nitrate Sulfate 65 Diisobutyl Phthalate 66 Sodium Nitrite 67 Acetyl Tri Butyl Citrate 68 Acetyl Tri Ethyl Citrate 69 Ethyl Acetate 70 Ethyl Cellulose 71 Cellulose acetate 72 Hydrogen Peroxide 73 Ethanol 74 Butyl Acetate 75 Linear Alkyl Benzene(LAB) 76 Heavy Alkylate(HAB) 77 Normal-Paraffin(NP) 78 Alkyd Resin 79 Unsaturated polyester Resin 80 Phenolic Resin 81 Bakelite 82 Fatty Acid 83 Solid Epoxy Resin 84 Furani Resin 85 Amino Resin 86 Vinyl Ester Resin 87 Saturated Polyester Resin 88 SB Acrylic Resin 89 Emulsion 90 Morpholine 91 N-formyl morpholine 92 Amino imidazoline 93 Amido imidazoline 94 Triazine 95 Carboxylic acid 96 Maleic Anhydride 97 Sodium Metabisulfite 98 Sodium Sulfite 99 Catalyzed Sodium Sulfite
Product Description Surface Treatment : Black Oxidized, Plain Oiled, Color Painting, Zinc, HDG, or according to customers' requirement. Raw Material: 60Si2MnA, 60Si2CrA, 55Si2Mn, 38Si7 Hardness: 44-48HRC Standard: DIN17221, BS970, GB/T1222 Fatigue life: 5 Million Times without Crack Partnership: Agents, Distributors are welcome Quality Control: Inspection on each workshift/new batch material/machine adjustment Diameter: 14mm Weight: 0.5KG Type: GL1419 Rail Clip COMPANY INFORMATION Kunshan Signum Machinery Technology Co.,Ltd is a professional supplier of Din Steel Rail. We can also provide railway fastening products according to customers' drawings and samples.Our main products are as following: 1. Screw spike, Coach screw, Drive screw, Sleeper screw, Dog spike, Railroad spike, Lock spike, Cut spike,etc. 2. Rail clip, Tension clamp,SKL clip, Pandrol clip, Deenik clip. 3. Swivel bolts, Track bolt, Special bolts, U bolts, J bolts, Anchor bolts, Foundation bolts, Stud bolts, Rod bolts, Curved bolts, Tunnel bolts. 4. Tie plate, Base plate, Rail plate, Rail fixing base, Rail Pads, Sole plate, Sole pad 5. Fish plate, Joint bar, Rail joint, Splice bar. 6. Track bolt, T bolt, Rail bolt, Clamp bolt, Inserted bolt, Clip bolt, Fish bolt, Square bolt, Rod bolt, rail joint bolt. 7. Clamp plate, Rail spring clamp, Anchor plate, Steel clip. 8. Rail Shoulder, Rail sleeper Inserts, Rail Anchors for rail sleepers. 9. Plastic dowel, Guide plate, Nylon insert. 10. Chinese Standard Steel Rail: GB/T11264-89 9kg 12kg 15kg 22kg 30kg steel light rail; Q/YYG001-2008 (formerly YB222-63) 4kg 8kg 18kg 24kg steel light rail. GB2585-2007 38kg 43kg 50kg 60kg 75kg steel heavy rail. YB/T5055/93 QU70 QU80 QU100 QU120 crane rail. 11. German Standard Steel Rail: DIN536 A45 A55 A65 A75 A100 A120 A150 Crane Rail. 12. American Standard Steel Rail: ASTM-A1 ASCE25, ASCE30, ASCE40, ASCE60,ASCE75,ASCE85,90RA,115RE,136RE,175LBs Steel Rail. 13. British Standard Steel Rail: BS11-1985 BS50O,BS60A,BS60R,BS70A,BS75A,BS75R, BS80A,BS80R,BS90A, BS100A, BS113A. Please feel free to contact us for more information.
The baobab tree, which has been revered throughout Africa as the Tree of Life for centuries. Baobabs grow wild throughout Africa and despite this harsh environment can become massive one of the largest known baobab trees is 98 feet tall and 36 feet in diameter! Baobab trees are resilient and magnificent living for up to 3,000 years. Baobab trees produce fruit pods that contain an incredibly nutrient dense powder and seeds. Baobab powder dries in the pod, is a peachy neutral colour and requires minimal processing. Once the pulp is separated from the seeds it is milled and sieved. Baobab powder is considered a raw ingredient, it is as pure as it can get!. Baobab powder has a mild tangy flavour and is packed with vitamins and minerals. It is particularly rich in vitamin C, B vitamins, potassium, magnesium, iron, calcium and fibre. Baobab powder is naturally in dried form. We are just separating Baobab pulp from its seeds with all food and safety measures and sieving it to get fine natural and untouched baobab powder. Baobab Fruit Powder is exceptionally nutrient-dense with one of the highest Antioxidant profiles of any fruit on the planet. It is a rich source of Vitamin C (7-8 times in oranges), packed with Calcium, Iron, Magnesium and Potassium, and contains 50% dietary fibre which research has shown to be Prebiotic in nature. Baobab Fruit Powder consistently beats all the other super-fruits such as acai, goji, blueberries, chia seeds and pomegranates across a wide range of important nutritional categories such as Antioxidants, Fibre, Vitamin C, Potassium, Magnesium and Calcium. Nutritionally it is the most well-rounded of the super-fruits. Its high vitamin and mineral content, coupled with its unique combination of health benefits, make it deserving of the name Queen of the Super-fruits. Following are some facts of Baobab powder: 1. Aid in weight loss by promoting feeling of fullness 2. Helps in balancing Blood sugar levels 3. Antioxidant and polyphenol content reduces inflammation 4. High fibre content promotes digestive health 5. Rich in prebiotic fibre 6. It has vitamin C (7-8 times more then oranges) 7. It has potassium 4 times more then banana 8. High in magnesium 9. Provides potent polyphenol antioxidants 10. Low glycemic (Helps in Maintaining blood sugar level) 11. It Supports gut health (Excellent prebiotic fibres) 12. Boosts immune system
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range() 20 55 10 Charging temperature range() 15 55 11 Storage ambient temperature) (20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 5% 95% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25 C, 3000 cycles ( 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45 C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature(%) 3%/month, 25 C 17 High temperature self-discharge rate (%) 5%/month, 45 C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2) 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2 C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
R-SIM18 unlocking card for iPhone 14/14Pro/14Pro Max. R-SIM18+ dual-chip CPU unlocking card for iPhone 14 sereis 5G version iOS16 systems. R-SIM 18 eSIM 5G version iOS16 System Unlock Card Sticker for iPhone 14 series. R-SIM18 Unlocking Card for iPhone 14/14Pro/14Pro Max/13 Mini/13/13Pro E-SIM 5G Version iOS 16 System. R-SIM 18+ uses the dual-chip CPU unlocking guarantee mode, enabling another unlocking chip at any timeï¼?in the case of an exception when using the card to unlock the phone. The innovation of the dual chip makes R-SIM18+ ranked first in the entire unlocking card industry. It's easy to get the full range of iOS16 phones at once, and the 5G call signal is stable. R-SIM18+ is the pinnacle of card unlocking technology. Option: 1. R-SIM 18. 2. R-SIM 18+. Features: 1. R-SIM18 combines the FPC contact unlocking tail type of the iPhone14Pro dual card slot with the contact type of the iPhone traditional single card slot SIM card, and the iPhone14 dual card is turned into an X single card type through the FPC dotted line connection point traditional. 2. R-SIM 18 Unlocking Card for the iPhone14 series(E-SIM 5G version iOS16 system). 3. Through the efforts of the RGKNSE team, the US version of (The E-SIM iPhone was successfully transformed into the physical SIM card phone, and successfully unlock the 5G signal perfectly, R-SIM has once again brought unlocking technology to the pinnacle of the card sticker industry. 4. iPhone14/14Pro/14Pro Max/13/13Pro/13 Mini/12/11 and other models are compatible to unlock, have easy operation procedures, and automatically unlock, no matter how the ICCID code is updated, unlocks without worry. 5. The black technology unlocking card R-SIM18, which turns locked into unlocked, is coming, breaking through the iOS16 system blockade once again, using a CPU chip with 256K large-capacity memory, and combining unlocking modes such as TMSI, IMSI, MIC, ICCID, and so on make Unlocked iOS16 system more stable and compatible.
TBK-988C LCD screen separator for 7 inch LCD display screen(straight screen and curved screen). TBK 988C LCD screen separator with built-in double large vacuum pump, super suction, super heating core, 360 degree free rotation for straight screen and curved screen separating repair. TBK 988C Built-in Double Vacuum Pumps Flat Edge LCD Touch Screen rotary Separator Machine Max 7 inches with Glue Clean Remove Middle Frame Clamp. Features: 1. Smart thermostat. 2. One-button start, 3. Tilt left and right. 4. vacuum break button. 5. 360 rotating fixture. 6. Mobile Phone fixed adjustment. 7. Necessary for mobile phone repair shops. 8. Can be rotated, strong suction with double pumps, 9. Accurate temperature ,no damage to the screen. 10. Maximum temperature 350. 11. Curved screen degumming, straight screen separator, use temperature 80 degrees, pull the wire to separate the screen. 12. Edge screen in frame cleaning OCA , separating glass. How to use it: 1. Just put on LCD on the heating panel, turn on "Vacuum Pump" switch, then you can separate the glass. And the LCD is firmly fixed on the panel while separating. 2. The LCD Screen Separator is used for separating glass lens, touch screen and LCD display assembly for Apple, Samsung, HTC as well as other cell phones. If you need mouds or other accessories for iPhone 4, iPhone 5, Samsung Galaxy S3, S4, N7100. Please contact us before you place order. Notice: 1. Like the current main stream cell phones, Apple, Samsung and HTC, many new cell phones are made of display assembly. Since glass lens, touch screen and LCD are connected together, it is hard to separate cracked or broken screen by hand if happened. Always you have to take it to Depot for repairing. 2. The cost is high and the time is long. Or you need purchase expensive equipment package, including separate machines, SMT machines, laminating machine and bubble removing machine. 3. But now you can handle it easily. We have developed the machine and skills, it is unnecessary to buy expensive equipment and wide space for general repair shops. After mastering the skills, you can replace an old screen within 3 minutes and it looks like a new one.
Eco Farming is a super active organic fertilizer that contains complete nutrients by utilizing microbial technology as a bioactivator to restore soil fertility. The use of Eco Farming Fertilizers is able to reduce the use of excessive inorganic fertilizers to only 25%, so that it can be an alternative for developing healthy and environmentally friendly agricultural production. HOW TO MAKE ECO FARMING FERTILIZER (SOLUTION) ï?§ Dissolve Eco Farming Fertilizer with a ratio of 1 tube: ï?§ 1 liter of solvent water (Cane Drops Water, Coconut Water, Rainwater) becomes 1 liter ï?§ Eco Farming Fertilizer solution. Do it 15 minutes or the day before ï?§ application, the longer it is left, the better because of the presence of ï?§ addition of positive micro-organism nutrients to eco-farming fertilizers 2. HOW TO MAKE ECO FARMING FERTILIZER READY TO USE (DILUTION) ï?§ Dosage for land use with units of ml/tank, add water according to the capacity of the spray tank volume (15-20 liters) and mix eco farming which has been dissolved in a 1 liter bottle container with a mixture of 50 ML 3. PROCEDURE FOR USE OF FERTILIZER ECO FARMING (APPLICATION) Land can be sprayed or watered with Eco Farming Fertilizer which has been diluted in the tank. ï?§ Plants must be sprayed on the leaves at 07.00-10.00 with Eco Farming Fertilizer which has been diluted in the tank. NUTRITION CONTENT AND BENEFITS IN SUPER ACTIVE ORGANIC FERTILIZER ECO FARMING Eco Farming's Super Active Organic Fertilizer has 13 essential nutrients needed by all types of plants and is divided into 3 groups, namely: 3 (Three) Primary Macro Nutrients consisting of N, P and K 3 (Three) Secondary Macro Nutrients consisting of S, Ca and Mg 7 (Seven) Micro Nutrients consisting of Cl, Mn, Fe, Cu, Zn, B and Mo) The benefits and symptoms of plants that require these nutrients are detailed as follows: 1. NITROGEN (N) 2. PHOSPHORE ( P ) 3. Potassium (K) 4. CALCIUM (Ca) 5. MAGNESIUM (Mg) 6. Sulfur (S) 7. BORON (Bo) 8. COPPER ( Cu ) 9. CHLORINE ( CI ) 10. IRON (Fe) 11. MANGANESE (Mn) 12. MOLIBDENUM ( Mo ) 13. ZIN (Zn) LEGALITY ECO FARMING MINISTRY OF RI LICENSING: SK MENTAN NO : 039.OL/Kpts/SR.310/B/01/2020 DATE OF MENTAN SK: JANUARY 20, 2020 COMPANY NAME: PT. BANDUNG ORGANIC INNOVATION REGISTRATION NUMBER: 02.08.200.005 FERTILIZER TYPE: ORGANIC BRICKET
Sodium carbonate is one of the important chemical raw materials, widely used in light industrial daily chemical, building materials, chemical industry, food industry, metallurgy, textile, petroleum, national defense, medicine and other fields, as raw materials for the manufacture of other chemicals, cleaning agents, detergents, also used in photography and analysis fields. It is followed by metallurgy, textiles, petroleum, national defense, medicine and other industries. The glass industry is the largest consumer of soda ash, consuming 0.2 tons per ton of glass. In the industrial soda, mainly light industry, building materials, chemical industry, accounting for about 2/3, followed by metallurgy, textile, petroleum, national defense, medicine and other industries. 1. The glass industry is the largest source of soda ash consumption, with 0.2t of soda ash consumed per ton of glass. Mainly used for float glass, picture tube glass, optical glass and so on. 2, used in chemical industry, metallurgy, etc. The use of heavy soda ash can reduce alkali dust flying, reduce raw material consumption, improve working conditions, but also can improve the quality of products, while reducing alkali powder on refractory erosion action, prolong the service life of the kiln. 3, as buffer, neutralizer and dough improver, can be used in pastry and noodle food, according to the production needs of appropriate use. 4, as detergent for wool rinsing, bath salt and medical use, tanning alkali agent in leather. 5, used in the food industry, as a neutralizer, leavening agent, such as the manufacture of amino acids, soy sauce and noodle food such as steamed bread, bread, etc. It can also be mixed into alkali water and added to pasta to increase elasticity and ductility. Sodium carbonate can also be used to produce monosodium glutamate 6, color TV special reagent 7, used in pharmaceutical industry, as acid antidote, osmotic laxative. 8, used for chemical and electrochemical oil removal, chemical plating of copper, aluminum etching, aluminum and alloy electrolytic polishing, aluminum chemical oxidation, phosphating after sealing, process rust prevention, electrolytic removal of chromium coating and chromium removal of oxide film, also used for pre-plating copper, plating steel, plating steel alloy electrolyte 9, metallurgical industry used as smelting flux, flotation agent with beneficiation, steel and antimony smelting used as desulfurizer. 10, printing and dyeing industry used as water softener. 11, leather industry is used for degreasing raw skin, neutralizing chrome tanning and improving the alkalinity of chrome tanning liquid. 12. The reference of acid in quantitative analysis. Determination of aluminum, sulfur, copper, lead and zinc. Urine and whole blood glucose were tested. The cosolvent of silica in cement was analyzed. Metallographic analysis, etc.
Features: Suitable Outdoor Camping,Emergency Maintenance,Night Hiking,Industrial,Searching,Hunting Etc... The Net Weight Only 134g,Compact And Convenient 4 Modes Spotligh & 3 Modes Floodlight Enough Meet Difference Lighting Need 2 Switches,One For Spotlight,One For Floodlight 5 USB Type-C Fast Charging 1.5A,Fully Charged Only 3 Hours 6 Long Work Time 5 Hours(Spotlight Turbo Mode)-44 Hours (Floodlight Low Mode) 7 High Brightness 20 Lumens(Floodlight Low Mode)-1400 Lumens(Spotlight Turbo Mode & Floodlight High Mode Both) 8 IPX68 Waterproof Perfectly Suitable For Most Outdoor Situation,Even In The Toughest Conditions 9 Battery Power Indicator Light ]: When The Flashlight Is Turned Off,Single Click The Switch Button To Check The Battery Status 1 Indicator Light Flash( 0%-10% Power) 1 Indicator Light On(10%-25% Power) 2 Indicator Light On(25%-50% Power) 3 Indicator Light On(50%-75% Power) 4 Indicator Light On(75%-100% Power) 10 [ Charging Indicator Light ]: In Charging Process 1 Indicator Light Flash: (0%-25% Power) 1 Indicator Light On & 1 Indicator Light Flash: (25%-50% Power) 2 Indicator Light On & 1 Indicator Light Flash: (50%-75% Power) 3 Indicator Light On & 1 Indicator Light Flash: (75%-95% Power) 4 Indicator Light On: Fully Charged 11 [ Low Voltage Protection Function ]: If The Battery Voltage Is Too Low,It Will Gradually Reduce The Current Working Gear Until Automatically Turned Off,Protect The Battery Life And Normal Use 12 [ Memory Mode Function ]: Regardless The Flashlight Is In Any Mode,It Will Automatically Memorize The Current Working Mode,After It Is Turned Off,It Will Start To Work In The Current Memory Mode 13 [ Overheat Protection Function ]: When The Item Is Overheat,The Work Mode Will Automatically Step-down(Such As: Turbo Mode Step Down To High Mode) 14 [ Adjustable Headband ]: The Headband Is Adjustable,Suitable For Different User 15 Low Power Remind Function ]: When The Power Is Too Low,Only Left 1 Indicator Light Flash,Remind User Charging Package Included:(Not Include Power Adapter) 1 x LED Headlamp 1 x Rechargeable 3400mAh 18650 Lithium Battery 1 x Headband 1 x USB Type-C Charging Cable 1 x Spare O-ring 1 x Warranty Card 1 x Instruction Manual 1 x Package Box
Diacetyl Tartaric Acid Esters of Mono  and Diglycerides Characters: Ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with HLB value of 8-10. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) It can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can be used in cream to make it smoother and finer. (4) It can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) It can also be sued in sugar, syrup and spices. (6) It can be used in non-dairy creamer to make the emulsion homogeneous , stable and supple in mouth. Usage: (1) Put this product in warm water at about 60�?? to get paste shaped substance, and then use it in appropriate proportion. (2) Dissolve this product in oils or fats homogeneously before further processing. (3) Directly mix it with flour for use. Recommended Addition Amount: Addition maximum is 1.0% for raw dried flour products and raw wet products, while 5.0% for non-dairy creamers. The addition amount can be changed based on production need for cream and fermented milk. Technical Index (Conform to GB25539-2010 standard Acid value (Calculated by KOH) / (mg/g) 65-85 Saponification value (Calculated by KOH) / (mg/g) 390-450 Total tartaric acid(W/%) 10-40 Total glycerol(W/%) 11-28 Total acetic (W/%) 8-32 Free glycerol(W/%) �?�2.0 Ignition residue (W/%) �?�0.5 Pb/(mg/kg) �?�2 Packaging�? Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5 KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
Transaction algorithm: 1. The Customer provides the LOI to the Supplier for consideration and decision-making on possible cooperation. 2. The Supplier, having considered the LOI, sends a Soft Corporate Offer to the Customer. 3. The Customer, having considered the SCO, provides the supplier with an ICPO confirmed by the bank, which will take part in the transaction as a guarantor of the transaction on the part of the Customer. 4. The Supplier accepts the Customer's ICPO and submits the Full Corporate Offer (FCO) for review by the customer. 5. The Supplier submits to the Customer a Sample General Contract for the supply of goods for study and adjustments. 6. After agreeing on the general contract, the Supplier and the Customer carry out the procedure for signing the contract and its verification. At the time of signing the contract, the parties exchange the documents, which are confirmed by banks that serve the parties and conduct transactions on the transaction. 7. The customer issues Proof of Funds (POF) confirmed by the customer's bank, the Supplier transfers to the customer Proof of Product (POP) confirmed by the Supplier's bank. 8. When signing an annual contract, the Customer provides the Supplier with an annual bank guarantee in the form of a Standby Letter of Credit from a bank with an international credit rating of at least A +, this guarantee is equivalent to the cost of the monthly volume of delivery of goods and is a guarantee of payment of funds for the goods in the event of force majeure. 9. To open the Customer's bank guarantee, the Supplier shall provide a Performance Bond determined as a percentage of the price. 10. After carrying out the procedures indicated above, the process of accumulation of goods in the Port begins, the charter of the vessel is provided and the delivery of goods is carried out in accordance with the schedule of deliveries and quality and quantity checks under contractual obligations. 11. After the arrival of the goods at the port of the Customer, the quality and quantity of the goods are checked and controlled. 12. The Customer, having received the goods at the port, pays by direct payment MT 103 to the Supplier's bank account for the full amount of the cost of the goods delivered in a specific period of time. Payment is made no later than 3-5 days from the date of receipt of the goods. Supplier's Guarantee Bank: JP Morgan Chase New York (AAA credit rating). The customer's bank must meet international standards and have an international credit rating of at least A +. If the Customer's bank has a credit rating below A +, then the transaction is possible only if there is confirmation of the guarantees of a bank with a low rating by an international bank with a rating not lower than A +. In other cases, the transaction will not be implemented. The following deliveries are carried out according to the schedule, which is an integral part of the general contract.
