Model No. GPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.05/0.2-0.4% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Model No. CPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.5/3% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Semi coke Model No. SC-01 SC-02 Fixed carbon(Min) 84% 84% Ash(Max) 8.0% 8% Volaltie matter(Max) 8.0% 8.0% Sulfur(Max) 0.35% 0.35% Moisture(Max) 18% 3% Size 8-18mm,18-35mm,30-60mm,0-1mm,1-3mm
Metallurgical coke Model No. MC-01 Fixed carbon(Min) 85% Ash(Max) 13.50% Volaltie matter(Max) 1.5% Sulfur(Max) 0.8% Moisture(Max) 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke Model No. FC-01 FC-02 FC-03 Fixed carbon(Min) 90% 88% 86% Ash(Max) 8% 10% 12% Volaltie matter(Max) 1.5% 1.5% 1.5% Sulfur(Max) 0.6% 0.6% 0.6% Moisture(Max) 7% 8% 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke is widely used in iron making because of its special physical and chemical characteristics. It's the main cupola molten iron fuel, foundry coke plays an important role in melting furnace charge and overheat the molten iron, support stock column, maintain good air permeability. Therefore, foundry coke with large size,low reactivity, low porosity, sufficient impact resistance and crushing strength, low ash and sulfur content, it is popular in the international markets.
Plastic Granulation Machine A plastic granulation machine, also known as a plastic granulator or plastic pelletizer, is a device used to transform plastic waste into small, uniform plastic pellets or granules. These pellets can be used as raw materials for various plastic manufacturing processes, such as injection molding, extrusion, and blow molding. Working Principles Feeding: Plastic waste, such as discarded plastic products or post-industrial plastic scraps, is fed into the machine's hopper or feeding system. The waste is usually in the form of larger pieces or chunks. Shredding: The plastic waste is first shredded into smaller pieces using blades or knives. This step helps in reducing the size of the plastic and preparing it for further processing. Grinding: The shredded plastic is then further reduced in size through grinding. Grinding mechanisms, such as rotating blades or a rotor, break down the plastic waste into even smaller particles. This process increases the surface area of the plastic, making it easier to melt and form into pellets. Melting and Extrusion: The ground plastic particles are fed into a heating chamber within the granulator machine. Heat is applied to melt the plastic particles. The molten plastic is then forced through a die or a screen with small holes to create cylindrical strands or filaments. The strands are formed by the action of rotating screws or rollers within the machine. Cutting and Cooling: As the strands exit the machine, they are cut into uniform lengths by a cutting mechanism. This results in the formation of plastic pellets or granules. The pellets are usually cooled using air or water to solidify them and prevent sticking or clumping. In some cases, a vibrating system is used to separate and cool the pellets. Collection and Packaging: The plastic pellets are collected and stored in containers or bags. They are then ready to be used as raw material in various plastic manufacturing processes, including injection molding, extrusion, or blow molding. The entire process is typically controlled and monitored by a control panel that allows operators to adjust parameters such as temperature, speed, and cutting length to achieve the desired pellet quality and production efficiency.
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
Smart Aluminium Foil Container Production Line Model: SEAC-130AS (Five/Six Cavities Capacity) Technical data: Max. Mould Size: 1480*1000*500mm; Efficiency: 45-75 times/min; Stroke: 150~300mm; Press Work Plate Dimension: 1500*1000mm; Production Line Total Power: 18KW; Production Line Total Size: 7100*2600*3600mm; Net Weight: 15, 000kg; Units Included: 1. Auto-lubricated feeder 2. Touch screen controlled panel 3.130Ton H type Pneumatic Press 4. Cavities Mould of any shape container 5. Automatic stacker 6. A forklift assist to change mould and raw material 7. Scrap sucker+Scrap presser (One Presser work with 2 Sucker) SEAC-130AS is the four cavities or five cavities capacity model production line for AFC. Complete real automatic level upgrade your factory capacity, lead your company be higher level competition and situation.
Quality minerals & raw materials to businesses like yours. minerals details: 1. talc lumps & powder (white, greenish, gray, light gray material available) 2. silica quartz (crystal, sami crystal, smoky, mica smoky, watery & milky) 3. mica (muscovite white, black, golden, silver available) 4. chrome ore (cr2o3 = 50 56%, 40 46% and 30 36% available) 5. china/kaolin clay (al2o3 = 38 60%, fe2o3 = 0.40%, tio2 = 1.2% available) 6. bentonite clay our silica quartz is known for its glassmaking, refractory, foundry materials etc. our talc lumps & powder is known for paper, paint and cosmetic industry etc. our mica scrap & mesh powder is known for metallic paint, cosmetic & flooring etc..
Vietnam colors polyester popcorn scrap.
Glass bottles and glass bottle scrap.
Vietnam Colors Polyester Popcorn Scrap..
Scrap lpg tank tanker cylinder.
Scrap plastic pet bottle grinder .
Carbon anode scrap recycled materials.
Mica flakes or mica scrap./sheets.
Spices, Scrap, Vegetables, Textile, Fruits..