JP54, JET A1, REBCO Quantity: 500,000 - 3,000,000 Barrels/Monthly PRICE : $42 Gross - $38 Net /Per BBL
VIRGIN D6 Quantity: 10,000,000 â?? 900,000,000 Gallons/Monthly PRICE : $0.90 Gross - $0.86 Net/Per Gal
[MAZUT M100 Gost 10585-75, Gost 10585-99 Quantity: 50,000 - 500,000 Metric Tons/Monthly PRICE : $220 Gross - $210 Net /Per MT Commissions: US$5 Buyer side, US$5 Seller side/Per MT]
BITUMEN Petroleum Asphalt 60/70, Petroleum Asphalt 80/100 Quantity: 50,000 - 500,000 Metric Tons/Monthly PRICE : $250 Gross - $240 Net /Per MT
LNG- Liquefied Natural Gas GOST 5542-87, Quantity: 50,000 - 500,000 Metric Tons/Monthly PRICE : $260 Gross - $250 NET /Per MT
Commodity: EN590 Origin: Russia/Rotterdam Delivery: FOB Rotterdam/ FOB Russian Port Trial Qty: 50,000 MT Contract Qty: 12 months + Rolls and Extensions FOB Price: Gross US$265.00 / US$255.00 Net CIF Price: Gross US$275.00 / US$265.00 Net Commission: US$10.00 - 50% SELLER SIDE (CLOSED) 50% BUYER SIDE (OPEN)
Commodity: AVIATION KEROSENE COLONIAL GRADE 54 Origin: Russia/Rotterdam Delivery: FOB Rotterdam/ FOB Russian Port Trial Qty: 2 MM BBLS Contract Qty: 12 months + Rolls and Extensions FOB Price: NWE Platts US$-10 Gross/ US$-8 Net Commission: US$2.00 - 50% SELLER SIDE (CLOSED) 50% BUYER SIDE (OPEN)
RUSSIA ORIGIN DIESEL GAS D2 OIL GOST 305-82 Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 500,000 Metric Tons per Month CIF Price: Gross USD $ 300.00 / USD $ 290.00 NET on CIF
LIQUIDIFIED PETROLEUM GAS. GOST 20448-90% Propane RUSSIAN ORIGIN Minimum Quantity: 10,000 Metric Tons per Month Maximum Quantity: 1,000,000 Metric Tons per Month CIF Price: Gross USD $ 250.00 / USD $ 240.00 NET on CIF
RUSSIA ORIGIN AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL Minimum Quantity: 500,000 Barrels per Month Maximum Quantity: 5,000,000 Barrels per Month CIF Price: Gross USD $ 43.00 / USD $42.00 NET on CIF
Biocarbon is the solid product of thermal degradation of biomass at medium to high temperatures in the absence of oxygen. It represents an important energy vector that has a higher heating value on a mass basis than biomass and a higher energy density when compressed. Through carbonization and removal of the main part of the volatiles, an upgraded biomass fuel is produced, with favorable combustion properties. Biocarbon has a great potential as solid fuel in small scale boilers and stoves and also industrial co-combustion plants, partially substituting fossil coal. Biocarbon is considered as green coal and are carbon neutral. Biocarbon is also used in the metallurgical industry as a substitute for fossil coal and coke. Arsta Eco bio carbon is made using agricultural Residue. We are able to produce high grade biocarbon because of our in-depth knowledge of feedstock and their properties and our state of art production techniques. The production process involves collection of agricultural Residue from the farm Gate, sorting and preparation of feedstock, Drying and sizing, Carbonisation, sorting and packing. Our bio carbon comes in three grades and two sizes. We also produce Biocarbon to customers specifications for orders above 200Tons 1: Rhombus Pellets (roll formed) 2: Hexagonal Logs (extruded) Specifications GRADE 1 Fixed Carbon: Greater than 65% Ash: Less Than 12% Heavy Metals: Nil Sulphur: less than 0.001 GRADE 2 Fixed Carbon: Greater than 72% Ash: Less Than 8% Heavy Metals: Nil Sulphur: less than 0.001 GRADE 3 Fixed Carbon: Greater than 85% Ash: Less Than 5% Heavy Metals: Nil Sulphur: less than 0.001
Products available: D2 AUTOMOTIVE FUEL OIL (AGO). D2 0,2-62 GOST 305-82 or 0,01 or 0,05. HSD DIESEL HIGH SPEED 500PPM EN90. DIESEL EN590 EURO4 GOST 52368. PMS Premium Motor Spirit JP54 (TS1) GOST 10227-86. JET FUEL A1 GOST 10227-86. MARINE FUEL OIL CST 180-280-380. ESPO (Siberia Pacific Oil) Crude Oil API 34,7. MAZUT MT100 GOST 10585-75 and 10585-99. REBCO GOST 51 858-2002/9965-76 API32/CRUDE OIL 39-1623-93. DIESEL EN590 10-50-500-5000 and others PPM Ultra Low Sulphur. LPG 50/50 Propane/Butane - 70/30 P/B. LNG 5542-87 by ISO containers etc. GASOLINE ALL TYPES (87-89-92-95). BITUMEN/ASPHALT ALL GRADES. PETROLEUM COKE ALL GRADES. LCO (Light Cycle Oil). D6 VIRGIN FUEL OIL. Either CFR your port or ASWP, or CIF/FOB Rotterdam/Houston. CIF deliveries to seaport upon buyer wish. Without any kind of request for prepayment. Trial delivery upon the agreed payment terms. First delivery upon the agreed payment terms. NON RUSSIAN/RUSSIAN NO BROKER CHAINS-OFFER FOR REAL BUYERS ONLY
High temperature resistant conveyor belt Usage With special formula, used in the field of metallurgy, building materials and other industries conveying cement, coke, sinter and other high temperature materials Feature 1 thethermal aging, ozone aging resistance performance is excellent, wont appear crack or other early aging when conveying materials 2 the high temperature resistant conveyor belt with special formula have long service life 3 the conveyor belt does not appear deformation under high temperature with special heat-resistant canvas 4 excellent sticking glue formula to ensure the high adhesion between layers understand the high temperature and avoid delaminating blister and other ills in the process of using, stability is good Main structure Made by the high temperature burning layer0, transition layer, insulating layer, strong layer and heat resistant layer in turn The high temperature resistant conveyor belt has the characteristics there will be micro carbonized layers when cover rubber in high temperature, carbonized layer density is good and has burning resistance can prevent heat transmit to the body further reduce the strength of the belt inside.the carbonized layer in the process of the belt running generate irregular small crack, favors the belt cooling Cover physical and mechanical properties Tensile strength =14 mpa, elongation at break =350% abrasion =100mm3 Resistant Conveyor Belt
Product Name: Titanium Bar Material: GR.1~GR.4 GR.5 (Ti-6Al-4V) GR.7 (Ti- 0.12~0.25Pd) GR. 9(Ti-3Al-2.5V) GR.23 ( Ti-6Al-4V ELI) GR.29 (Ti-6Al-4VELI-0.08-0.14Ru) GR.36 (Ti-45Nb) Ti-3.5Al-10Mo-8V-1Fe Ti-15V-3Al-3Cr-3Sn Ti-32Mo Ti-6Al-2Sn-4Zr-2Mo Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Ti-3Al-5Mo-4.5V Ti-6Al-7Nb Ti-13Nb-13Zr Ti-6Al-2Sn-4Zr-6Mo Other brands can be customized Details: EnergyTi-Professional titanium rod, titanium alloy rod, titanium square rod, titanium round rod, production suppliers, spot supply, complete standards, specifications. Titanium alloy rod is mainly used in mechanical equipment, electroplating equipment, chemical equipment, petroleum coking zinc equipment, medical, various precision parts and other industries. Size: Rolling:�¦8mm~�¦39mm x L Length:300-6000mm Forging:�¦30mm~�¦400mm x L Production standard: ASTM F67, ASTM F136, ASTM F1295, ASTM F1472, ASTM F1713, ASTM B348, ASTM B381, ISO 5832-2, ISO 5832-3 Production status and manufacturing process of titanium alloy rod: Production state: hot processing state (R), cold processing state (Y), return state (M) Manufacturing process: hot forging, hot rolling, cold rolling, annealing, pickling Titanium alloy rod shape: Titanium round bar, titanium square bar, titanium hexagon bar Forging rod, rolling rod, drawing rod Surface of titanium alloy rod: Surface:Hot rolled black surface, Machined surface, polished surface (H11, H9, H8) Packing: Export wooden case packing or according to customer's request
RCDD series of dry self-cleaning electromagnetic iron separators | Series Electromagnetic Separators Product Description Series RCDD dry self-discharging electromagnetic separators are designed to automatically eliminate the powder or lumpish iron impurities from the non-magnetic materials. The interiors of the separators are mould with special resins with a self-cooling hermitic structure. The separators feature high magnetic permeability, intense absorption force, dust proof, rain proof and corrosion resistance. They may work reliably in poor conditions. Tramp Iron Magnetic Separator Description It is used to clean metal tramp iron, such as nails, bolts, staples and metal debris, from non-magnetic metarials in conveyor system, to protect conveyor, crusher, hammer mill and other process equipment downstream from damage. It is suspended crossly over the belt conveyor, with rectification control equipment to rectify AC into DC, supplying power for the coil to generate a suitable magnetic field, and capture ferrous impurities. Capture and discharge of magnetic impurities are operated by the control equipment, no need manual operation. Features: -half sphere shaped magnetic field; -long-term working shift; -unload tramp iron into the tramp iron box; -moving conveyor for unloading -There are electromagnetic type RCDD series and permagnent magnetic type RCYD type (made of ferrite magnet or rare earth magnet neodymium iron boron). Application: 1) Remove tramp iron from thick material layers and larger particles of mineral ores, coal, coke and limestone for purification of product or ingredient 2) Protect processing equipment such as crushers, pulverizers, conveyors, belts, screens, etc. 3) Recovery of steel from steelworks slag.
The national high-tech enterprise,Jiaozuo Zhenjieneng Environmental Protection Equipment Technology Co., ltd, which was established in 1991, is an internationally renowned supplier of high humidity and high viscosity drying equipment, specializing in engineering design, technology research and development and equipment manufacturing for drying materials such as sludge & solid waste, pulp and feed residue. Zhenjieneng Company Insists on continuous Innovation around customers' needs, pays attention to investment in engineering theoretical research, spur with long accumulation, and promotes the advancement of drying technology; To inspire the potential and create value for customers, to provide products, solutions and services with industry competitiveness and safety and reliability, with operations in many countries and regions in Asia, Europe and America. ZJN New Updated Waste Heat Utilization Dryer is a general name for the series of Automatic rake turning sectional combined type "Rotary harrow rolling triple level multi-loopdrying equipment with high humidity and high viscosity, which is produced by ZJN Co. Ltd and is matched with the drying technology of "Using waste heat from flue gas of boiler" which is exclusively owned by ZJN Co. Ltd. The equipment uses the waste heat discharged from the boiler to dry the materials, with no investment in heat supply, no cost in heat using, high economic efficiency and no secondary pollution; It embodies the basic principles of "energy conservation, environmental protection and resource recycling" advocated by circular economy, and can thoroughly solve the pollution problem of enterprises, save energy and reduce emission, and achieve multiple benefits at one stroke, thus providing guarantee for enterprises to realize the goals of resource utilization, reduction and harmless treatment. ZJN New Updated waste heat utilization dryers are widely used in various industries such as solid waste, hazardous waste sludge, coke particles, slime, sludge, organic fertilizer and other industries. The products are sold to more than 20 countries and regions in Southeast Asia and have numerous cooperative customers. Welcome to use the real energy-saving waste heat utilization dryer. Company website: www.zjndryer.com Tel: 15539111910
Want to find a manufacturer specializing in drying machines? Please choose Jiaozuo ZJN Environmental Protection Equipment Technology Co., ltd. Which is the best drying equipment? Of course it is ZJN Co., ltd.We are really looking forward to cooperating with you! ZJN Waste Heat Utilization Dryer is a general name for the series of drying equipment with high humidity and high viscosity, which is produced by ZJN Company and is matched with the drying technology of "using waste heat from boiler flue gas" which is exclusively owned by ZJN Company. The equipment uses the waste heat from boiler to exhaust to dry the materials, with no investment in heat supply, no cost in using heat, high economic benefit and no secondary pollution. It embodies the basic principles of "energy conservation, environmental protection and resource recycling" advocated by circular economy, and can thoroughly solve the pollution problem of enterprises, save energy and reduce emission, and achieve multiple benefits at one stroke, thus providing guarantee for enterprises to realize the goals of resource utilization, reduction and harmless treatment. ZJN Waste Heat Utilization Dryer has been widely used in various industries such as solid waste, hazardous waste sludge, coke particles, slime, sludge, organic fertilizer and other industries. The products are sold to more than 20 countries and regions in Southeast Asia and have numerous cooperative customers. Welcome to use ZJN Waste Heat Utilization Dryer. Company website: www.zjndrying.com Tel: 15539111910
Vertical Shaft Impact Crushers, medium-sized material by breaking all kinds of hard and abrasive sand and gravel 0.5 mm were used to obtain a high cubical percentage of sand content crushers. Crushing process, the crusher through the feed hopper fed with high-speedspinning rotor material crushing chamber with high velocity launch takes place withstone lining. Crushed operating ,stone hitted stone by crusher due to the realization of a crusher spare part consumption is extremely economical and low-cost type. VERTICAL SHAFT IMPACT CRUSHER OF USES AREA Breaking of natural stones used of the river material, Small-sized materials to be processed at the mill rate by reducing the size of the materials of cement material, broken only by bringing the maximum rate Cubic material if requested on limestone, basalt and dolomite quarries The production of sand, gravel and gravel production for Asphalt concrete production to be used Structures, including road asphalt materials used in the production of fine-grainedproducts To increase the rate of carbon steel with liquid spraying method is used to reduce the size of the added coal to coke. STANDART SPECIFICATIONS 1. Electric motor power unit (used for upper body trim and belt). 2. Maintenance platform 3. Two separate drive pulley for speed (1400 r / min - 1600 r / min).). 4. Maintenance crane 5. 3 pieces SKF or FAG brand bearing used in drive system.
Cement Shaft Kiln is used for calcination in cement plant. We offer 50 TPD to 300 TPD vertical shaft kiln on turnkey basis for Cement Plant. Cement Shaft Kiln is modern day answer for cost effective production and a boon for the developing countries. VSK is the advanced technology available worldwide for small & medium entrepreneur. We (ZK Corp) fabricate vertical shaft kiln, rotary kiln, raw meal mill, ball mill, O-sepa and all other related equipment for the construction of small size & medium size cement plants. Structure: The raw material to be calcined is charged at the top of the kiln. It it then pre-heated by the combustion gases in the counter-current before reaching the burning zone. In the burning zone the material is calcined by means of fuel introduced together with primary combustion air through radially arranged burner lances. Cooling air is introduced at the discharge part of the kiln to cool the product in a counter-current manner. The heated cooling air travels upwards to the burning zone and is used again there as the secondary combustion air. From the top of the kiln he exhaust gas are directed to a dust collecting system. OUR ADVANTAGE 1. Different plant sizes available (50TPD,100TPD,200TPD,300TD, 500TPD,1000TPD,2000TPD,3000TPD). 2. Use of alternative fuels like low volatile coal, petroleum coke, lignite etc. 3. Use of alternate raw materials like bauxite, laterite, iron ore, Lime, Sea Shells etc. 4. Better Kiln design to prevent radiation loss.
Stone hammer crusher application: this series of stone hammer is applicable crushing of brittle minerals, such as coal, salt, plaster, alum, brick, tile and limestone with compression strength no more than 100mpa and humidity no more than 15%. Pc hammer crusher introduction:this series of machine broke materials through the high-speed rotating hammer body and collision the material surface, it has a simple structure, large crushing ratio, high production efficiency and other characteristics, it can be used for dry and wet two forms crushing, it applies to mining, cement, coal, metallurgy, building materials, roads, fire and other departments chronology medium hardness and brittle materials. The device can change material particle size and adjust gap of article grate in accordance with user requirements, so it can meet different users Structural characteristics: stone hammer crusher has compact frame, reasonable layout, easy installation, good maintainability, simple operation. Particularly, it excellently adapts the layout of cement production process, save the space of process layout. With special structural characteristics, that is having big materials ratio etc. Stone hammer crusher is divided into ordinary hammer crusher and ring hammer crusher respectively. Ring hammer crusher generally used in coal, coke and other industries. Ordinary hammer general english prefix is expressed by pc, used pch english prefix that usually is ring hammer crusher.
