ER-MG2-300/400, a Navigation Grade MEMS gyro sensor up to 400deg/s measurement range and 0.05/hr bias instability, is specially designed for precision attitude & azimuth measuring, positioning, navigating, guidance in high performance IMU /AHRS/ GNSS-aided INS, aerial/marine/land mapping/survey system/UAV/AUV and navigation grade MEMS weapon system. With the high dynamic measurement range and high precision, ER-MG2-300/400 is a cost effective, robust, reliable, small size, light weight, low power, most suitable replacement of medium-low navigation grade FOG/DTG with high dynamic azimuth & attitude measuring , inertial positioning and navigation function in aerial, marine manned, or unmanned carriers. The ER-MG2-300/400 High Precision Navigation MEMS Gyroscope is a single-axis MEMS angular rate sensor (gyroscope), capable of measuring angular velocity up to a maximum of �±400�°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word. The ER-MG2-300/400 with an advanced, differential sensor design rejects the influence of linear acceleration, enables to operate in exceedingly harsh environments where shock and vibration are present. The ER-MG2-300/400 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (40 C to +85C).
ER-MG2-50/100, a high performance MEMS gyro sensor with 0.01-0.02�°/hr bias instability and 0.0025-0.005�°/â??hr angular random walk, is specially designed for north seeking, pointing, initial alignment in logging tools/gyro tools, mining/drilling equipment, weapon/UAV launch systems, satellite antenna, target tracking system and so on. Thanks to the high performance, ER-MG2-50/100 can also used in high precision attitude measuring, stabilization control, positioning, navigating in navigation grade MEMS IMU/INS, land surveying/land mobile mapping system, railway train system, etc. So ER-MG2-50/100 is a best, cost effective, robust, reliable, small size, light weight, low power alternative of medium-low navigation grade FOG DTG with north seeking, precision attitude measuring , inertial positioning and navigation function. The ER-MG2-50/100 High Performance North Seeking Gyroscope is a single-axis MEMS angular rate sensor (gyroscope) capable of measuring angular velocity up to a maximum of �±100�°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word. The ER-MG2-50/100 is intended for north seeking applications. As an advanced, differential sensor design rejects the influence of linear acceleration, enabling ER-MG2-50/100 to operate in exceedingly harsh environments where shock and vibration are present. The ER-MG2-50/100 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (40C to +85C).
Silica sand is a naturally occurring hard granular material made up of quartz grains. It is also known as quartz mineral and is very essential commodity in numerous industries. It is made up of crystalline mineral from oxygen and silicon atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the silica sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes silica gel, high purity silica, fumed and fused silica, precipitated silica, etc. Silica sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in construction, glass and ceramic, paints, plastics industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica sand can easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
Silica sand is a naturally occurring hard granular material made up of quartz grains. It is also known as quartz mineral and is very essential commodity in numerous industries. It is made up of crystalline mineral from oxygen and silicon atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the silica sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes silica gel, high purity silica, fumed and fused silica, precipitated silica, etc. Silica sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in construction, glass and ceramic, paints, plastics industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica sand can easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
Silica sand is a naturally occurring hard granular material made up of quartz grains. It is also known as quartz mineral and is very essential commodity in numerous industries. It is made up of crystalline mineral from oxygen and silicon atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the silica sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes silica gel, high purity silica, fumed and fused silica, precipitated silica, etc. Silica sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in construction, glass and ceramic, paints, plastics industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica sand can easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
Silica sand is a naturally occurring hard granular material made up of quartz grains. It is also known as quartz mineral and is very essential commodity in numerous industries. It is made up of crystalline mineral from oxygen and silicon atoms with a molecular formula of Silicon Dioxide (SiO2) in the form of quartz. It is abundant in nature and is found in soil, stone and sand. It ranges from very fine particles to large granules sizes. Depending upon the processing method and source of extraction the exact physical and chemical properties can vary. It is obtained by extraction methods like open-pit mining and underground mining. Then it undergoes several process to refine its quality and remove impurities. Then the silica sand gets ready and now it can be used in wide range of industries and in various applications. Processing of silica as per the specification is perfectly done by us and it includes silica gel, high purity silica, fumed and fused silica, precipitated silica, etc. Silica sand finds it application in water purification and filtration, disodium ultramarine and refractories, in building artificial turfs, act as a catalysts in foundry moldings and in metal casting. It can also be used in construction, glass and ceramic, paints, plastics industry. It finds its role as a filler in agriculture and food production industry, in construction industry for bricks, motor and concrete. Silica sand can easily absorb water and therefore it finds its application in hygroscopic and to maintain sports stadiums and leisure facilities. Jyoti Chemical provides you with the premium quality of White Silica Sand at lowest rates in various mesh sizes i.e. 16 mesh, 24 mesh and in various forms i.e. powder and crystal as per your specification and packaging required.
bestscooterstore * com â??Product Description FRAME Roadmachine 01 Premium Carbon with Tuned Compliance Concept Endurance â?¢ ICS Technology, Stealth Cable Routing â?¢ PF86 Bottom Bracket â?¢ Flat Mount Disc â?¢ 12x142mm Thru-Axle FORK Roadmachine 01 Premium Carbon with Tuned Compliance Concept Endurance â?¢ ICS Technology, Stealth Cable Routing â?¢ Flat Mount Disc â?¢ 12x100mm Thru-Axle â?¢ 50mm Offset (Size 47-51), 45mm Offset (Size 54-61) GEARS 2x12 CHAINWHEEL SHIMANO Dura Ace 12spd 50-34T CASSETTE SHIMANO Dura Ace 12spd 11-30T CHAIN SHIMANO Dura Ace 12spd FRONT DERAILLEUR SHIMANO Dura Ace 12spd REAR DERAILLEUR SHIMANO Dura Ace 12spd SHIFTERS SHIMANO Dura Ace 12spd BRAKES SHIMANO Dura Ace, RT900 Rotors (160/140) HANDLEBAR ICS Carbon, One-Piece Full Carbon Cockpit STEM ICS Carbon, One-Piece Full Carbon Cockpit SEATPOST Roadmachine 01 Premium Carbon D-Shaped Seatpost â?¢ 15mm Offset SADDLE Fizik Argo Tempo R1 (150mm) HUBS DT Swiss 180 Straightpull, Ratchet EXP 36, SINC Ceramic Bearings RIMS DT Swiss ERC 1100 Dicut, 45mm TIRES Vittoria Corsa Control, 28mm TIRE CLEARANCE 28mm (Measured Width)
Purchase 1 Unit New 2023 Cervelo S5 Force eTap AXS Disc Road Bike from Bambobike is 100% safe, because buying products at Bambobike provides a 100% money back guarantee. Bambobike Address: Jl. Irian Barat No.121i, Gg. Buntu, Kec. Medan Tim., Kota Medan, Sumatera Utara 20212 - Indonesia For online purchases, visit site us: https://bambobike.com/ Price : $ 5400.00 Phone : +6282267267645 Delivery time : 7 Days Express Port : CIF/ Kualanamu International Airport Packaging : Box Original Shipping : Worldwide use FedEx, DHL, UPS. Payment Terms : Bank Transfer (T/T), PayPal, Wise Transfer, Western Union (WU), MoneyGram and WorldRemit SPECIFICATION Fork Cerv�©lo All-Carbon, Tapered S5 Fork Headset FSA IS2 1-1/8 x 1-3/8 Thru Axles Cervelo Aero Thru-Axles, 12x100/142 Wheels Rear:Reserve 63, 24.4mm IW, Zipp ZR1 ST,12x142mm, XDR freehub, 24h, centerlock, tubeless compatible Front: Reserve 52, 25.4 IW, Zipp ZR1 ST, 24H, centerlock, tubeless compatible Tires Vittoria Corsa TLR G 700x28c Crankset SRAM Force AXS, 48/35T, DUB, with power meter Bottom Bracket SRAM DUB Ceramic, BBright Chain SRAM Force, 12 speed Front Derailleur SRAM Force AXS, 12 speed Rear Derailleur SRAM Force AXS, 12 speed Cassette SRAM Force, 10-33, 12 Speed Shifters SRAM Force AXS, 12 speed Handlebar Cerv�©lo HB14 Carbon Stem Cerv�©lo ST35 Carbon Brake Caliper SRAM Force Saddle Selle Italia NOVUS BOOST EVO SuperFlow Ti Seatpost Cerv�©lo SP20 Carbon Brake Rotor SRAM Paceline Centerlock Accessories Cervelo Handlebar Front Computer/Accessory Mount, Cervelo Rear Accessory Mount
High-performance laser machine designed for efficient cutting and engraving in industries such as Footwear, Apparels, Electronics & Embroidery. With its advanced features and precise control technology, it offers exceptional speed, accuracy, and versatility, making it an ideal choice for large-scale cutting and engraving applications. Single Head Configuration: This machine is equipped with Single laser head, enabling simultaneous cutting or engraving operations. It maximizes productivity by reducing processing time and increasing efficiency. High-Speed DSP Control: The machine utilizes advanced 64-bit high-speed DSP control technology, enabling continuous and fast curve cutting. It optimizes the processing route for improved efficiency and shorter production time. Stable and Precise Cutting: The three-way reflective system and 6-balanced sliding type guide rails ensure stability and precision in both cutting and engraving processes. Wide Range of Materials: The machine is suitable for working with various non-metal materials, including cloth, leather, acrylic, rubber, wood, paper, ceramics, and more. Characteristic BS-6040 BS-9060 BS-1490 Model No. BS-6040 BS-9060 BS-1490 Engraving Area 600 mm x 400 mm 900 mm x 600 mm 1400 mm x 900 mm Cutting Speed 0-800 mm/min 0-800 mm/min 0-800 mm/min Laser Power 80 W 80 W 100 W Resolution 0.025 mm 0.025 mm 0.025 mm Positioning Precision
Product Description The Gaggia Anima Prestige is a super-automatic espresso machine that wraps over 75 years of espresso making experience in an elegant design that blends modernity and tradition. With a simple and intuitive programming menu, the ability to brew milk drinks with one touch, and time tested innovations that enhance the quality of your brewing experience, the Anima yearns to make a barista out of you. The Anima brews with a powerful 15 bar pump and Gaggia's innovative removable brew group. There are two dedicated drink buttons located on the front of the machine for espresso and espresso lungo and each can be programmed to your liking. The Gaggia Optiaroma system lets you brew using 6.5 - 11.5 grams of coffee (in five increments). You can also adjust brew temperature (Min/177.5 �°F, Med/182.9 �°F, Max/184.5 �°F), beverage volume, and pre-infusion. These settings can then be saved, allowing you to brew a drink to your exact specifications at the push of a button. Coffee is ground fresh for every brew cycle with the built-in ceramic burr grinder that can be set to one of five settings depending on the roast of your beans. The machine is also equipped with the Gaggia Adapting system which adjusts the grinding process to make sure that the correct amount of coffee is ground for your espresso. Should you prefer to use pre-ground coffee instead, the grinder can be bypassed entirely using the bypass doser to fill the brew group directly.
Product Description Weighing in at just 4.9oz â?? a full .5 ounces lighter than the ultra-lightweight MGX â?? the MGXtreme continues the Revo legacy by pushing the limits of what is possible with design and engineering. Equipped with a 10 bearing system, the MGXtreme starts with seven stainless steel HPCRâ?¢ bearings + one roller bearing for increased corrosion protection. The addition of two CeramiLite hybrid ceramic spool bearings results in ultimate distance with effortless handling and control throughout the cast. 10 bearing system 7 stainless steel HPCRâ?¢ bearings + 1 roller bearing 2 additional CeramiLite Spool Bearings provide improved casting performance One piece X-Mag alloy frame Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range C6 carbon sideplates provide significant weight reduction without sacrificing strength and durability IVCB-IV (Infinitely Variable Centrifugal Brake) gives very precise brake adjustments allowing anglers to easily cast a wide variety of baits Infini II spool design for extended castability and extreme loads Compact bent carbon handle provides a more ergonomic design that is extremely lightweight Round EVA knob provides improved grip for improved cranking power Aircraft grade aluminum main gear provides weight reduction without sacrificing durability
PRODUCT DESCRIPTION: Place of Origin: China Brand Name: SUOYI Model Number: SY-SiC02 Shape: black and green powder Material: quartz sand Chemical Composition: Ti,C Product name: silicon carbide Color: black or green Molecular weight: 40.096 Melting Point: 2700 â?? Density: 3.22 g/cm�³ Water soluble: Insoluble in water Molecular formula: SiC CAS: 409-21-2 EINECS: 206-991-8 Brand Name: SUOYI Packaging Details: 25kg/barrel or customized Supply Ability: 10 Metric Ton/Metric Tons per Month APPATION: â?´ As an abrasive, it can be used to make abrasive tools, such as grinding wheels, oil stones, grinding heads, sand tiles, etc. â?µ As metallurgical deoxidizer and high temperature resistant material. â?¶ High-purity single crystal can be used to manufacture semiconductors and silicon carbide fibers. Main uses: used for wire cutting of 3-12 inch monocrystalline silicon, polycrystalline silicon, potassium arsenide, quartz crystal, etc. Engineering processing materials for solar photovoltaic industry, semiconductor industry, and piezoelectric crystal industry. Used in semiconductors, lightning rods, circuit components, high temperature applications, UV detectors, structural materials, astronomy, disc brakes, clutches, diesel particulate filters, filament pyrometers, ceramic membranes, cutting tools, heating elements, nuclear fuel , jewelry, steel, protective gear, catalyst carrier and other fields.
PRODUCT DESCRIPTION: Place of Origin: China Brand Name: SUOYI Model Number: SY-SiC02 Shape: black and green powder Material: quartz sand Chemical Composition: Ti,C Product name: silicon carbide Color: black or green Molecular weight: 40.096 Melting Point: 2700 â?? Density: 3.22 g/cm�³ Water soluble: Insoluble in water Molecular formula: SiC CAS: 409-21-2 EINECS: 206-991-8 Brand Name: SUOYI Packaging Details: 25kg/barrel or customized Supply Ability: 10 Metric Ton/Metric Tons per Month APPATION: â?´ As an abrasive, it can be used to make abrasive tools, such as grinding wheels, oil stones, grinding heads, sand tiles, etc. â?µ As metallurgical deoxidizer and high temperature resistant material. High-purity single crystal can be used to manufacture semiconductors and silicon carbide fibers. Main uses: used for wire cutting of 3-12 inch monocrystalline silicon, polycrystalline silicon, potassium arsenide, quartz crystal, etc. Engineering processing materials for solar photovoltaic industry, semiconductor industry, and piezoelectric crystal industry. Used in semiconductors, lightning rods, circuit components, high temperature applications, UV detectors, structural materials, astronomy, disc brakes, clutches, diesel particulate filters, filament pyrometers, ceramic membranes, cutting tools, heating elements, nuclear fuel , jewelry, steel, protective gear, catalyst carrier and other fields.
Crankcase Precision cast oxidation treated surface of the crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U"type "Nbr/Com/Buna N" material enhances the performance of the waterpump and improves its service life. The plunger support guide ring ensures thecoaxiality of the plunger, extending the service life of the water seal andplunger. Pump head assembly Selected stainless steel material, new and efficient structuraldesign, high strength, no pores, long service life, and safe operation.Reinforced 8-bolt fastening, 18mm, grade 12.9. Check valve assembly The valve cage is made of sturdy and durable materials, with stainlesssteel 303 and 404 poppet valves and springs to extend its service life. Thedisassembly and assembly of one-way valve components is simple and easy tomaintain Pommel Precision machined hard solid ceramic plungers, as well asthickened SST limit bolts, provide longer service life, better durability andapplicability. Bearing Large tapered ball bearings ensure the concentricity of thecrankshaft connecting rod and ensure stable operation of the water pump. Bearing Block Precision machining ensures coaxiality and concentricity. Crank axle Precision forging process and hardening treatment ensure thestrength, service life, and durability of the crankshaft. Oil viewing window The oil viewing window located behind the water pump isconvenient for checking the oil level and easy to repair. Precision die-castingand high-quality sealing rings ensure the sealing effect of the rear cover. Oil seal and O-ring A better crankcase oil sealing system, with stainless steelsprings for oil seals and O-ring seals to ensure sufficient tension. Plunger connecting rod Super strong alloy material, split structure, higher loadstrength, longer service life, ensuring safe and stable operation.
Crankcase: Precision cast oxidation treated surface of the crankcase. High and low pressure water seal components: The high and low pressure water seal design of the "U"type special material enhances the performance of the water pump and improvesits service life. The plunger support guide ring ensures the coaxiality of theplunger, extending the service life of the water seal and plunger. Pump head assembly: Selected stainless steel material, new and efficient structuraldesign, high strength, no pores, long service life, and safe operation.Reinforced 8-bolt fastening, 18mm, grade 12.9. Check valve assembly: The valve cage is made of special materials that are sturdy anddurable. The stainless steel poppet valve and spring extend its service life.The disassembly and assembly of one-way valve components is simple and easy tomaintain. Pommel: Precision machined hard solid ceramic plungers, as well asthickened SST limit bolts, provide longer service life, better durability andapplicability. Bearing: Large tapered ball bearings ensure the concentricity of thecrankshaft connecting rod and ensure stable operation of the water pump. Bearing Block: Precision machining ensures coaxiality and concentricity. Crank axle: Precision forging process and hardening treatment ensure thestrength, service life, and durability of the crankshaft. Oil viewing window: The oil viewing window located behind the water pump isconvenient for checking the oil level and easy to repair. Precision die-castingand high-quality sealing rings ensure the sealing effect of the rear cover. Oil seal and O-ring: A better crankcase oil sealing system, with stainless steelsprings for oil seals to ensure sufficient tension. Plunger connecting rod: Super strong alloy material, split structure, higher loadstrength, longer service life, ensuring safe and stable operation. Liquid inlet medium: Acidity, alkalinity, temperature 85 .
Oil window: The oil viewing window located on the side of the water pump iseasy to inspect and the oil level is easy to repair. High and low pressure water seal components The high and low pressure dual water seal design of the"U" type "Buna N" material enhances the performance of thewater pump and improves its service life. The plunger support guide ringensures the coaxiality of the plunger, extending the service life of the waterseal and plunger. Pump head assembly: Selected forged brass material, high strength, no porositydefects, long service life, high pressure resistance, stable operation,reinforced 6-bolt fastening, 10mm, grade 8.8. Check valve assembly: The valve cage is made of specialmaterials that are sturdy and durable. The stainless steel 303 and 404 poppetvalves and springs, as well as the brass valve seat and cover, are sturdy anddurable, extending their service life. Pommel Precision machined hard solid ceramic plunger, sturdy anddurable. Crank Axle Accurate rounded corners and process treatment ensure durabilityand service life. Oil seal and O-ring A better crankcase oil sealing system, with stainless steelsprings for oil seals and O-ring seals to ensure sufficient tension. Bearing The positioning of large-sized bearings and snap rings ensuresthe concentricity of the crankshaft connecting rod, ensuring stable operationof the water pump. Bearing Block Precision machining ensures coaxiality and concentricity. Plunger Connecting Rod The high-quality alloy connecting rod has high load strength,durability, and stable operation. Crankcase The surface of the crankcase that has been oxidized by precisioncasting is a classic streamline design.
Crankcase Precision cast oxidation treated surface ofthe crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U" type "Nbr/Com/Buna N" material enhances the performance of the water pump and improves its service life. The plunger support guide ring ensures the coaxiality of the plunger, extending the service life of the water seal and plunger. Pump head assembly Selected stainless steel material, new andefficient structural design, high strength, no pores, long service life, andsafe operation. Reinforced 8-bolt fastening, 18mm, grade 12.9. Pommel Precision machined hard solid ceramicplungers, as well as thickened SST limit bolts, provide longer service life,better durability and applicability. Bearing Large tapered ball bearings ensure theconcentricity of the crankshaft connecting rod and ensure stable operation ofthe water pump. Crank axle Precision forging process and hardeningtreatment ensure the strength, service life, and durability of the crankshaft. Plunger connecting rod Super strong alloy material, splitstructure, higher load strength, longer service life, ensuring safe and stableoperation. Adual cylinder engine with strong horsepower and key start. Standard fittingï¼? Ceramic watergun 10 meters explosion-proofpressure resistantsteel wire high pressure pipe 2.2m inlet pipe + filter Multi-angle nozzle
Crankcase Precision cast oxidation treated surface ofthe crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U" type "Nbr/Com/Buna N" material enhances the performance of the water pump and improves its service life. The plunger support guide ring ensures the coaxiality of the plunger, extending the service life of the water seal and plunger. Pump head assembly Selected stainless steel material, new andefficient structural design, high strength, no pores, long service life, andsafe operation. Reinforced 8-bolt fastening, 18mm, grade 12.9. Pommel Precision machined hard solid ceramicplungers, as well as thickened SST limit bolts, provide longer service life,better durability and applicability. Bearing Large tapered ball bearings ensure theconcentricity of the crankshaft connecting rod and ensure stable operation ofthe water pump. Crank axle Precision forging process and hardeningtreatment ensure the strength, service life, and durability of the crankshaft. Plunger connecting rod Super strong alloy material, splitstructure, higher load strength, longer service life, ensuring safe and stableoperation. Adual cylinder engine with strong horsepower and key start. Standard fittingï¼? Ceramic water gun 10 meters explosion-proofpressure resistantsteel wire high pressure pipe 2.2m inlet pipe + filter Multi-angle nozzle
CAM SPRAY ELECTRIC COLD WATER PRESSURE WASHER The Cam Spray Electric Cold Water Pressure Washer is built for performance and convenience with an industrial 3-plunger pump featuring stainless valves and ceramic plungers. This high-quality unit includes an industrial motor to deliver long-lasting cleaning performance. The included Multi-Reg variable pattern nozzle rotates to change from a 0�° stream to a 40�° flat pattern and also slides forward for low-pressure chemical application. WHAT'S INCLUDED (1) Electric cold water pressure washer (1) 25ft. pressure hose (1) Trigger gun (1) Wand (1) Variable nozzle FEATURES + BENEFITS Rotationally molded, high-density polyethylene cart provides a rigid and durable enclosure for the pump and motor Convenient onboard storage for wand and 1-gal. jug of detergent KEY SPECS Item# 104208 Brand CAMSpray Manufacturer's Warranty 1 year Limited Warranty Ship Weight 125.0 lbs Pressure (PSI) 1,000 Flow (GPM) 2.0 Motor Industrial grade Horsepower 1.5 Volts 120 Amps 15 Pump 3-plunger Drive Style Direct Gun Front entry trigger Nozzle Type Multireg variable pattern Orifice Size 4 Hose 25 ft. Coupler Size (in.) 22mm Cart High-density polyethylene Power Cord (ft.) 35 Max. Inlet Water Temp (F) 140 Max. Output Water Temp (F) 140 Chemical Injector Downstream low pressure Adjustable Pressure Yes Pump Oil Type SAE30 Pump Oil Included Yes Thermal Protector Yes Dimensions L x W x H (in.) 26 x 17 x 34 Product Weight 125
Cooling Tower Spray Nozzles The nozzle of cooling tower is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower. As a professional cooling tower spray nozzle manufacturer, we offer different types of water distribution spray nozzles for cooling towers. You can choose what you need from the following products. WHAT IS A COOLING TOWER NOZZLE? Cooling tower nozzles direct the hot water in need of cooling to the tower fill. These provide the water sprays to wet the fill. Uniform water distribution at the top of the fill is essential to achieve proper wetting of the entire fill surface. Nozzles can either be fixed in place and have either round or square spray patterns, or can be part of a rotating assembly as found in some circular cross-section towers. Cooling tower nozzles disperse water across the heat exchanger. They are usually made of PVC, glass or ceramic. Some nozzles are high-temperature resistant and have a non-clogging design. Cooling tower nozzles come in both cross flow and counter flow designs. SOME BENEFITS OF COOLING TOWER NOZZLES Non-Clogging Low Pressure Design Operational Adaptability Efficient Performance Virtually Maintenance-Free Unique Solid Cone Spray Ensures Consistent Distribution Easy Installation & Very Reliable Evenly Distributes Water Comes In Both Spray And Target, With Or Without Grommets
