Hydroxypropyl Starch are a starch-based additive designed for dry mortars in the building industry. These starch ethers can improve the performance and optimize the workability of dry mortar by modifying the thickness and rheology of varied dry mortars based on cement and gypsum.� Starch� ether� should be used in combination with cellulose derivatives. It can well perform in neutral and alkaline conditions, and it is compatible with other additives in gypsum or cement-based building materials.
Hydroxyethyl cellulose(HEC) is a gelling and thickening agent derived from cellulose. HEC is non-ionic, water-soluble materials that provide good properties of thickening, suspending, binding, emulsify, film-forming, stabilize, disperse, retain water and etc. And It is widely used in coatings, construction, papermaking and polymer polymerization industries.
The redispersible polymer powder is a powder binder prepared by spray drying a special emulsion(polymer). The powder can be quickly dispersed into an emulsion after contact with water, and has the same properties as the initial emulsion, that is, a film can be formed after evaporation of water, the film has high flexibility, high weather resistance and various kinds of High adhesion of the substrate.
Caustic soda 99% 1. Cas no.: 1310-73-2 2. Mf: naoh 3. Einecs no.: 215-185-5 4. Hs code: 2815110000 5. Place of origin: china (mainland) 6. Specification: ComposingFlake 99%Pearl 99% Naoh (sodium hydroxide)99% min.99% min. Na2co3 (sodium carbonate)0.4% max.0.3% max. Nacl (sodium chloride)0.02% max.0.015% max. Fe2o3 (ferric oxide)0.004% max.0.001% max. 7. Usage: Used as a raw material in the manufacture of soap, detergent, textiles and paper, in water softening and treatment, refining petroleum products, in sanitation, and hygiene products, and in the food and drug industry, etc. 8. Package: 25kg/bag. 22 mt /20?fcl with pallets, 25 mt/20?fcl without pallets. 9. Storage: As a class 8 corrosive substances, due to its corrosivity, careful storage and safety in production are needed, such as personnel has to wear protective equipment during the procedure of handling and storage. Keep it in a closed container in a dry warehouse.
Acid black i 10b 1. Cas no.: 1064-48-8 2. Mf: c22h14n6na2o9s2 3. Einecs no.: 213-903-1 4. H.S. Code :32041200 5. Appearance: black even powder 6. Place of origin: hebei, china (mainland) 7. Specification: Molecular weight: 616.48 Strength:100% 120% Water-insoluble impurities: 1.5%max Moisture%:0.9max Light fastness: 5 Wash fastness: 4 Sweat fastness: 4 Seawater fastness: 3 8. Usage: used in leather dyeing, febric dyeing like wool, silk and nylon. 9. Package: 25kg/bag or drum. 12mt/20?fcl. 10. Storage: the product must be stored in shade, dry and well-ventilated warehouse, avoid to be contacted with oxidizing chemicals and combustible organic substance. Keep it away from heat, sparks and open flames.
Full automatic gypsum cornice production line We independent research and development a new set of full automatic gypsum cornice production line in 2015. This equipment will be less investment and quick returns. It is easy to handle with less labor and high output. It will be 4-5 times then man-made output. So it will be the best choice for business investment. 1. Plant area: Workshop size: 60m*2m*3m total is 120 sq.M Natural drying place size: 60m*15m*3m total is 900 sq.M 2. Production capacity: 100mm*2400mm gypsum cornice 5 workers 4300 pcs per day (24hours), 1, 300, 000 pcs per year (300days.) 3. Power: 10 kw 4. Patterns: we can supply several normal international standard pattern type and it also can be customized .
We independent research and development a new set of no paper faced gypsum board production line in 2015.It takes us 6 years .This equipment will be less investment and quick returns. It is easy to handle with less labor and highly output. Our r&d philosophy is more green, more saving and more environmental protection. Besides all the advantages of traditional paper faced gypsum board, the new no paper faced gypsum board has many itâ??s own characteristics. Fireproofing grade: the traditional gypsum board fireproofing grade is b, but the new no paper faced gypsum board fireproofing grade is a. Perfect fireproofing material. Environmental protection: it will save a lot of paper and more effective to protection the tress, the forest. Production cost: because there is no need to use protection paper, modified starch, white latex, the production cost will be cut off a lot. Production pass rate: it will be higher than traditional paper faced gypsum board. Because the donâ??t stick paper will be disappeared. Applied rangeï¼?it will be wider than traditional paper faced gypsum board, special in the often raining places. Because there is no paper, starch and latex, mildew and coating shedding will be not occurred. Market prospect: because of the characteristics above, it will be the upgrade and update of the traditional paper faced gypsum board. The market prospect is perfect. In addition, this new machine also can produce cement cladding board, waterproof gypsum board by changing the recipe. After little machine adjusting, it also can produce the perlite composite board.
1(1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20) million square meters per year gypsum board production line Paper faced gypsum board is a kind of lightweight construction board(made with calcined natural gypsum or outgrowth of chemistry)use the construction gypsum and face paper as the primary raw material, mixed with relevant fiber, modified starch, speed freezemeter, vesicant and water; produced through mixed, molded, froze, incised and dried such working procedure. Paper faced board is lightweight, fireproofing, soundproof, dampproof, heat insulation, and have a good capability that can be nailed, cut planed, its good for tooling, knocked-down, easy for completion, and can enlarge the space. Its widely be used in industry construction, civil construction, especially used as crossbanding for interior of high buildings, such as: used for unload wall board and ceiling board. The gypsum board production line was based on the inland and overseas equipments that have been improved and innovated. It reached an absolute automatic level in self-mixing, self-molding, self-supplying, self-outputting, self-turning, self-cutting. We can provide different grades (high, medium, low) production line according to the require of customers.
1.Production scale: 10, 000--200, 000 mt/year 2.Raw material: Content of caso4. 1/2 h2o in gypsum mine 80% The grade of mine and the crystal configuration will influence the quality of semi-hydrated gypsum 3, working principle The main working principle for calcining system, of calciner The main body of calciner consists of fine diameter intensive radiator pipes. Thermal oil fed into the coil pipes. The heat releases into power by heat exchanger. Roots blow installed at bottom of calciner for putting the cooling air into furnace by grid plate. The cooling air blows gypsum power in furnace for reaching boiling state. At certain temperature , the calcined gypsum power will lighten, and flow automatically to outlet. This type gypsum power is state in quality. It is easier to control the content of free water , initial and final setting times. Moreover, our equipments adopt dry electric precipitator, dust collection efficiency is over 95%. 4, simple structure, durable equipment The boiler does not need rotary components because the materials has come true fluidization. It simplifies the structure, manufacture and maintenance. In any case, the furnace will not damage since it uses low-temperature heat source. The life span is much longer than normal type. 5, compact, space saving Calciner is a kind of vertical equipment. The dust collector installed on the top of it as whole body. This design is good at space saving, and avoids moisture condensation on corona lines of dust collector.
Acid black att 1. Cas no.: 167954-13-4 2. Mf: c22h14n6na2o9s2 3. Einecs no.: 213-903-1 4. H.S. Code :32041200 5. Appearance: reddish dark brown powder 6. Place of origin: hebei, china (mainland) Specification: Index no.:acid black att 4092 Dry mixture:red brown with metal luster Wet mixture:black even powder/red powder Strength:130%, 120%, 110%, 100% Moisture %:3.0 Water insoluble matter %0.2% Fineness (residue on 80mesh screen) %1.0 Light fastness:7 Water fastness:4-5 Sweat fastness:5 8. Usage: Used in leather dyeing, febric dyeing like wool, silk and nylon. 9. Package: 25kg/bag or drum. 12mt/20’fcl.
CMC, in food applications, is a good emulsion stabilizer, thickener, and has excellent freeze, melt stability, can improve product flavor and prolong storage time. A. Function of CMC in the food industry: 1. Thickening: CMC can produce high viscosity at low concentration. It also acts as lubricant. 2. Water retention: CMC is a water binder, helps increase shelf life of food. 3. Suspending aid: CMC acts as emulsifier and suspension stabilizer, particularly in icings to control ice crystal size. 4. Film forming: CMC can produce a film on the surface of fried food, eg. instant noodle, and prevent absorption of excessive vegetable oil. 5. Chemical stability: CMC is resistant to heat, light, mold and commonly used chemicals. 6. Physiologically inert: CMC as a food additive has no caloric value and can not be metabolized.
Cationic polyacrylamide is a water soluble polymer polyelectrolyte, non-toxic, odorless, easy to absorb moisture, soluble in water, not soluble in ethanol, acetone and other organic solvents. Molecular chain of this product has a good stretch performance and this product has good elasticity, stable relative molecular mass, uniform charge distribution, rapid in generating flocculation, rapid separation speed, compact flocculation, high strength and good dehydration.
Cationic polyacrylamide is a water soluble polymer polyelectrolyte, non-toxic, odorless, easy to absorb moisture, soluble in water, not soluble in ethanol, acetone and other organic solvents. Molecular chain of this product has a good stretch performance and this product has good elasticity, stable relative molecular mass, uniform charge distribution, rapid in generating flocculation, rapid separation speed, compact flocculation, high strength and good dehydration.
Hydroxypropyl methyl cellulose (hpmc), hydroxyethyl cellulose (hec), carboxy methyl cellulose (cmc), hydroxyethyl methyl cellulose (mhec), redispersible polymer powder (rdp), concrete pumping primer aid.Produce
Hydroxypropyl methyl cellulose (hpmc), hydroxyethyl methyl cellulose (hemc), methyl cellulose (mc), hydroxyethyl cellulose (hec), ethyl cellulose (ec) .
Hydroxypropyl methyl cellulose(hpmc), methyl hydroxyethyl cellulose(mhec), hydroxyethyl cellulose(hec), carboxy methyl cellulose (cmc), redispersible polymer powder (rdp)..
Hydroxypropyl methyl cellulose (hpmc), hydroxyethyl methyl cellulose (hemc/mhec), hydroxyethyl cellulose (hec), methyl cellulose (mc), ethyl cellulose (ec) .Manufacturer
Redispersible polymer powder (RDP/VAE), hydroxypropyl methylcellulose (HPMC), polycarboxylic acid superplasticizer (PCE), polypropylene stabilized fiber (PP fiber).
Redispersible polymer powder (rdp/vae). hydroxypropyl methyl cellulose (hpmc), polycarboxylic acid superplasticizer (pce), polypropylene stabilized fiber (pp fiber).OEM service, packaging
Wall putty, lignin fiber, polypropylene fiber, hydroxy propyl methyl cellulose (hpmc), redispersible polymer powder, polyvinyl alcohol (pva), polycarboxylate superplasticizer.