All type of raisins dried fruits and dried vegetables, legumes and spices. fresh fruits, frozen, freeze dried fruits puree fruit and puree vegetables wheat, corn, maize, barley, flour, sunseeds beans. green mung beans. red beans. light beans. black eye beans. purplebeans.
Charcoal, palm kernel, honey, donkey skin, bamboo, brooms stick, hard wood, soko wood, yams, vegetables, kaolinite, ofada rice, moringa seeds, okro, palm oil, cassava chips, snails, sold mineral, cashew nut, cocoa, fresh ginger, iron ore, castor seeds.
Organic wholemeal pasta organic classic pasta organic snacks (grissini, biscotti, gallette and ricci del delta) organic sunflower oil.Ex work terms
Where to buy animal feeds wholesale, where to buy wheat grains wholesale buy bone meal feed wholesale, buy broiler chicken feed wholesale, buy cottonseed meal feed wholesale, where to buy soybean meal feed wholesale, where to buy fish meal feed wholesale, buy sunflower meal for sale, buy fresh alfafa hay feed wholesale, buy corn gluten meal cgm wholesale, buy kidney beans wholesale, buy whole oats grains wholesale, buy sunflower seeds online, buy confectionary sunflower seeds online, buy yellow corn wholesale online, buy animal feeds wholesale europe | buy grains wholesale in europe, where to buy animal feeds & grains wholesale for export where to buy agricultural grains wholesale for export buy meal feeds for animal feeding wholesale.
Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
The complete cattle feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of cattle at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows cattle to better utilize the nutrients in these ingredients. Feed pellets are widely used in small farms, large farms, and medium-sized feed mills. Our premium cattle feed pellet production line includes grain hammer mills, conveyors, mixers, cattle feed pellet mills, coolers, crushers, screeners, automatic packaging machines, and more. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the cattle feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
This 1-2 t/h feed pellet line is suitable for processing various animal feed pellets, such as poultry feed, ruminant feed, livestock feed, pig feed, cattle feed, sheep feed, goat feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 1-2ton/h feed pellet production line is a hammer mill crusher, a feed pellet mill, a feed mixer, a counter-flow feed pellet cooler, a crumbler machine, a pulse dust collector, a vibrating screen, a bagging machine, etc. This complete feed pellet plant can accomplish the process of raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. This 1-2t/h feed pellet production line has the features of high working efficiency, less energy consumption, reliable performance, and lower production cost. It enjoys a very high reputation in the feed processing industry. At the same time, it has the best customer loyalty and trust in Europe, South America, North America, Asia, Africa, and other regions. We will design the full animal feed pellet line flow chart according to your raw materials dimension and specific requirements.
Our 3-4 tons/hour feed pellet production line is suitable for processing various animal feeds, such as chicken feed, poultry feed, goose feed, livestock feed, sheep feed, pig feed, cattle feed, camel feed as well as horse feed, goat feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 3-4tons per hour feed pellet mill includes a hammer mill, a feed pellet machine, a feed mixer, a countercurrent feed pellet cooling machine, a feed pelletizer, a pulse dust collector, a vibrating screen, a bagging machine, etc. This complete set of feed pellet equipment can complete raw material mixing, conveying, feeding, and pelletizing. After the raw materials become feed pellets, they are cooled and packed into bags by the following equipment. The raw materials of the feed pellet production line have good versatility and can be used for pelletizing various raw materials such as corn, sorghum, wheat, beans, and oil meal. At the same time, animal feed production plants have the characteristics of low energy consumption, high production efficiency, and large profits. Especially suitable for large feed mills, farms, large farms, etc. At the same time, free installation, training, plant design, and timely after-sales service are provided.
Technical Parameters Travel of X and Y Axes: 250x300 mm; Maximum cutting thickness: 350 mm; Maximum Work piece weight: 200 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 340x500x350 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 1480x1010x1400 mm; Approx. Machine weight: 1050 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 1200x1500 mm; Maximum cutting thickness: 1000 mm; Maximum Work piece weight: 3500 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1300x1900x1000 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 4200x3600x2300 mm; Approx. Machine weight: 10000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 1000x1200 mm; Maximum cutting thickness: Standard: 800 (Can be adjustable) mm; Maximum Work piece weight: 2000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1010Ã??1500 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 100 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 3100x2500x2300 mm; Approx. Machine weight: 5000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 630x800 mm; Maximum cutting thickness: 600/800 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 680x1080x600 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2265x1865x1980 mm; Approx. Machine weight: 3500 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
DK7745 Technical Parameters Travel of X and Y Axes: 450x550 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 750 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 500x750x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1865x1350x1900 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 400x500 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 450 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 460x690x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1600x1240x1400 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 350x450 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 400x650x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400 mm; Approx. Machine weight: 1440 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 320x400mm; Maximum cutting thickness: 400 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 360x610x400mm; Surface Roughness /Ra: Ra less than 2.5u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function; Total machine power: 1.8KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001mm; Pulse width adjustable range: 15-150us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400mm; Approx. Machine weight: 1150kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80kg.
Hongxin Automation Equipment Co., Ltd. Vibratory Bowl is an auxiliary feeding equipment for automatic assembly or processing machinery. It can arrange various products in an orderly manner, assemble various parts of the product together with automatic assembly equipment, and become a complete product, or complete the processing of workpieces with automatic processing machinery. There is a pulse electromagnet under the vibratory Bowl hopper, which can make the hopper vibrate vertically. The inclined spring plate drives the hopper to rotate around its vertical axis for torsional vibration. The parts inside the hopper rise along the spiral track due to this vibration. During the ascent process, after a series of track screening or attitude adjustment, the parts can automatically enter the assembly or processing position in a unified state according to the requirements of assembly or processing. The purpose of its work is to automatically and orderly arrange disordered workpieces in a directional and orderly manner through vibration, and accurately transport them to the next process. Application: Vibratory Bowl is widely used in various industries such as electronics, hardware, plastics, watch industry, batteries, food, connectors, medical equipment, pharmaceuticals, food, toys, stationery, and daily necessities manufacturing. They are essential equipment for solving industrial automation equipment supply problems. The vibrating disc can not only meet the directional sorting requirements of products, but also be used for sorting, testing, counting, packaging, etc. It is a modern high-tech product.
Mountain-Buffer, cowskin / full leather work gloves, yellow, double stitching, index finger made entirely of leather, white 10oz canvas back, safety cuff, elastic on the back of the hand, knuckle protection, pulse protection, Indian quality Abrasion resistance: 3 Area of application: Logistics / Commission, Craft / construction, Innovation / New, Agriculture / forestry / garden and landscaping construction, Discount / self-service area / DIY, Be natural / sustainability, Technical trade / industrial needs Carrier / liner: Canvas fabric / 8 ounces Colour: yellow Cuffs: On the pole Cut resistance: Power level Leather code: 288 CAWA-Y Leather sorting: A/B leather sorting Leather thickness: 0,9 - 1,1mm Material: Cowskin Material carrier / liner: Half lined Puncture strength: Power level 3 Size: All Size Surface texture: smooth Tear strength: 3 Type / quality: Full leather Type of knitting / cut: 88 Cut resistance: 1
Safety, winter gloves made for winter / upholstery leather, brown, complete faux fur lining, brown color sorting, strong leather finish, palm reinforcement, white canvas back, safety cuff, elastic band on the back of the hand, knuckle protection, pulse protection Abrasion resistance: 2 Area of application: Logistics / Commission, Craft / construction, Innovation / New, Agriculture / forestry / garden and landscaping construction, Discount / self-service area / DIY, Assembly / Automotive, Technical trade / industrial needs Carrier / liner: Canvas fabric / 8 ounces Colour: Brown / Any Colour Cuffs: On the pole Cut resistance: Power level B Leather sorting: Variable Leather thickness: Variable Material: Winter Material carrier / liner: Faux fur lining Puncture strength: Power level 2 Size: All Size Surface texture: Structured Tear strength: 4 Type / quality: Furniture leather Type of knitting / cut: 88 Cut resistance: 2
