The Trimble S6 DR is a 100% cable-free robotic total station. Numerous new features and the latest technologies will catapult your productivity and profitability forward. Available with either the TSC2 or TCU controllers. Trimble S6 total station offers field-proven optical and GPS integration in a field to office. The controller of your choice connects without wires to the GPS system. It can be changed between detectors, collecting all information into a single job file for data transfer. Trimble S6 Total Station supplies the ability and flexibility required by todayâ??s surveying professionals. Using Trimble VISION technologies, the Trimble S6 Total Station enables surveyors to remotely see and measure through a live video feed from the tool on their data control. The Trimble S6 Robotic redefines surveying tool performance with an unsurpassed integration of servos, angle sensors, and measurement technology. The Trimble S6 Robotic Complete Station offers innovative MagDrive technologies for stunning speed. It takes the work from servo or surveying. Numerous features and the latest technologies will catapult your productivity and profitability. And as an upgradable studying solution, the Trimble S6 Robotic Total Station will grow with your business. The advanced error compensation of the instrument provides precise measurements every time. Together with MagDrive servo technologyâ??s smooth servo motors, the Trimble S6 offers exceptional speed and accuracy. Come With: 1 x 2.4Ghz Radio Module Replacement for Trimble S6 1 x Trimble S6 Power and Charging Kit 1 x Battery Connector Board Replacement for Trimble S6 1x Tribrach 1 x 360 prism AC adaptor TSC2 with Access TSC2 charger 2 x Hard carry cases TRIPOD, PRISMS OR PRISM POLE 3 Battery Packs User Manual
Trimble S6 total station offers field-proven optical and GPS integration in a field to office. The controller of your choice connects without wires to the GPS system. It can be changed between detectors, collecting all information into a single job file for data transfer. Trimble S6 Total Station supplies the ability and flexibility required by todayâ??s surveying professionals. Using Trimble VISION technologies, the Trimble S6 Total Station enables surveyors to remotely see and measure through a live video feed from the tool on their data control. The Trimble S6 Robotic redefines surveying tool performance with an unsurpassed integration of servos, angle sensors, and measurement technology. The Trimble S6 Robotic Complete Station offers innovative MagDrive technologies for stunning speed. It takes the work from servo or surveying. Numerous features and the latest technologies will catapult your productivity and profitability. And as an upgradable studying solution, the Trimble S6 Robotic Total Station will grow with your business. The advanced error compensation of the instrument provides precise measurements every time. Together with MagDrive servo technologyâ??s smooth servo motors, the Trimble S6 offers exceptional speed and accuracy. Come With: 1 x 2.4Ghz Radio Module Replacement for Trimble S6 1 x Trimble S6 Power and Charging Kit 1 x Battery Connector Board Replacement for Trimble S6 1x Tribrach 1 x 360 prism AC adaptor TSC2 with Access TSC2 charger 2 x Hard carry cases TRIPOD, PRISMS OR PRISM POLE 3 Battery Packs User Manual
This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
We design & supply PLC Panel For Hydro Power Plant With SCADA System Architecture: Control Room LT Panel Room 33 KV Switch Yard 2 nos. Frances Turbine Units. Remote Terminal Connectivity on IEC-60870-5-101 PLC Panel Connected with Switch Yard, LT Panels And all Field Instruments. Control Features on SCADA: Hydro Turbine Governing Hydro Turbine Synchronising Hydro Turbine Control and Safeties HT Feeders on on/of Control. Generator Breakers on/off Control. Isolator on/off Control Turbine Auto Start/Stop Control Load Raise/ Load Lower Control Remote Terminal Control On Units. Display Features: On/off Status For All Incomers And Outgoing Feeders. Tripping Status For All Incomers And Outgoing Feeders. Tripping Status For All Protection Relays. Charged Bus Bar Status. Voltage, Current, KWH, HZ, KW, Kvar Display For All Feeders Units Tripping Status Generator Parameters Display Turbine Parameters Display OPU Parameters Display GLOP Parameters Display Switch Yard Parameters Display. Data Logging Features: Time Base Data Logging Facility Shift Wise Data Logging. Event Data Logging. Alarm Data Logging. Turbine Running Hour Data Logging Turbine, Generator, Transformer And Bus Bar Temperature Data Logging. Trending: Current Trending For Power Parameters(Voltage, Current, KW) Historical Trending For Power Parameters. Report Printing: Trend Screen Printing Shift Report Printing Historical Data Printing For Logged Power Parameters, Alarm And Events. Other Details: Minimum Order Quantity: 1 PIECE
This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
Chassis: The chassis is the framework of the auto rickshaw on which all other components are mounted. It provides structural integrity and support for the vehicle. Cabin: The cabin is the enclosed compartment where the driver and passengers sit. It is usually made of metal or fiber-reinforced plastic and may have windows, doors, and a roof. Roof: The roof provides shade and protection from rain and sun. It is often made of metal or fiberglass and can be detachable or fixed. Doors: Some auto rickshaws have doors to provide additional protection from the elements and improve security for passengers. Windshield and Windows: Auto rickshaws have windshields at the front to protect the driver from wind and debris. Windows can be found on the sides for ventilation and visibility. Lights: Auto rickshaws are equipped with headlights, taillights, turn signals, and brake lights for safe driving, especially at night. Bumpers: Bumpers are installed at the front and rear of the rickshaw to absorb impact in case of a collision and protect the vehicle's body. Suspension: Suspension components, such as shock absorbers and springs, help provide a smoother ride by absorbing road shocks and vibrations. Engine Compartment: This area houses the engine, transmission, and related components. It may have a hood or cover to protect the engine from dust and debris. Exhaust System: The exhaust system consists of a muffler and pipes that route exhaust gases away from the engine and reduce noise. Fenders: Fenders cover the wheel wells and help prevent road debris from being thrown onto the passengers and driver. Safety Features: Some modern auto rickshaws may come equipped with safety features like seatbelts, roll cages, and side impact protection. Advertising Panels: Many auto rickshaws have advertising panels on their exteriors to generate additional income for the owners. Dashboard: The dashboard houses the vehicle's controls, instruments, and gauges, allowing the driver to monitor the vehicle's performance.
The Vanta analyzer is our most advanced handheld X-ray fluorescence (XRF) device and provides rapid, accurate element analysis and alloy identification to customers who demand laboratory-quality results in the field. Vanta handheld XRF analyzers are built to be tough. Their rugged and durable design makes them resistant to damage for greater uptime and a lower cost of ownership. The Vanta Element XRF analyzer series has the performance and portability you need for fast scrap sorting or metal ID. Both the Vanta Element and Vanta Element-S models offer fast grade identification with clear on-screen grade comparisons for easy operation when testing metals. The new Vanta Element-S handheld X-ray fluorescence (XRF) analyzer delivers fast light element detection at an affordable price, joining a family of cost-effective, entry-level Vanta Element XRF instruments. The S model is equipped with a silicon drift detector (SDD) to analyze light elements like magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S) and phosphorus (P) in alloys. Ideal for scrap recycling, basic PMI, metal manufacturing and precious metals, the Vanta Element-S effectively measures ferrous metals, aluminum, copper, stainless steel, nickel and gold karats. The analyzer offers clear on-screen grade ID and comparison for the light elements Mg, Al and Si in seconds. Its SDD detector can distinguish similar alloy grades like 303 stainless steel from 304, and aluminum 6061 or 6063 from 1100. Vanta Element-S analyzers come with the essential features the Vanta series is known for: speed, reliability, ruggedness, connectivity and smartphone-like ease of use. Weighing a slim 2.9 lb. (1.32 kg), the analyzer is up to the challenge of all-day testing for alloy and metal analysis. Powered by Olympus proven Axon Technology, the S model brings the same high-count rate and stability as the rest of the Vanta series for fast results and ROI.
3. Main technical parameters 3.1. Y-axis movement range: 130mm 3.2. X-axis movement range: 150mm 3.3. Spacing between two marking columns: 270mm 3.4. XY axis drive method: electric drive 3.5. Z-axis click method: motor driven 3.6. Click power: 500gf or customize weights according to customer requirements. 3.7. Striking force: 500gf or customized weights according to customer requirements. 3.8 Click speed: 10-100 times/minute 3.9. Scratch speed: 30-2000mm/min 3.10. XY torque: 8.0Nm 3.11 Testing station (linkage): 2 3.12 Control functions: A. Digitally set running speed (X/Y/Z axis) B. Digitally set running displacement (X/Y axis) C. Counting value display setting: 0~999999, any setting, power off memory D. Line drawing method: long (square), straight line. 3.13. Shutdown method: automatic shutdown by counting values 3.14. Working voltage: 220VAC 50HZ 3A 3.15. W780 * D570 * H520mm 2ã?? Instrument Introduction 2.1 Product Usage Click marking tester is a special testing device for small consumer electronic products such as e-books, tablet computers, mobile phones, walkie-talkies and Electronic dictionary. It mainly performs durability tests on hand written screens and touch screens, such as grid drawing, clicking, and rubbing. 2.2 Equipment characteristics Using PLC control, simply select a starting point on the screen of the product to be tested, and then set the testing stroke in the device to run. This machine can perform four modes of testing: X-line, Y-axis line, XY axis square or rectangular, and Z-axis click. And it uses a stepper motor combined with a ball screw as the motion mechanism, with accurate positioning, high accuracy, and low noise; Long lasting and durable.
Model: DL1220S Product name: Fully automatic insertion and extraction force testing machine Maximum test stroke: 0-150mm Maximum test speed: 0-300mm/min Maximum test load: 50kg Minimum fine adjustment distance: 0.01mm X-axis travel distance: 0-75mm Y-axis travel distance: 0-75mm Load units: N, lb, gf, Kgf can be freely switched Transmission mechanism: ball screw Power system: stepper motor Machine weight: 80kg Machine size 400 * 300 * 980mm Power supply 1 AC220V 2A or specified 2. Introduction This machine is suitable for testing various types of connectors, such as insertion force, extraction force, plastic retention force, and service life. Through computer analysis, it can accurately measure the load, stroke, and corresponding change curve of the tested object. It can also accurately control the stroke, speed, target measurement times, and pause time of connector insertion and extraction force testing. Especially with various specialized clamps and fixtures, the connectors can be more automatically centered and aligned during testing, without the problem of "eating one side" occurring. By using the Chinese screen settings in Windows, the operation is simple and convenient, and all data can be stored (such as test conditions, displacement, curve plots, life curve plots, inspection reports, etc.), making it a reliable high-performance testing instrument. Equipped with a dynamic impedance testing system, it can test the insertion and extraction force while also testing the dynamic impedance and drawing (load stroke impedance curve diagram)
modelDL313082T Maximum compressive strength2T Degree of decomposition1250000 Testing accuracy05 Operation modeMicroprocessor Unit switching KgNLBKN Test spaceLWH8008001000mm Compression speed standard 103mmmin Report ItemsSerial number peak value average value set pressure holding value memorable Structure and controlMicrocomputer operating system servo motor ball screw Safety devices Overload protection overvoltage protection limit protection device External dimensions LWH14008001700mm Motor power 400W Net weight 400Kg source AC220V10 2 Product Usage The cardboard box compression testing machine is the most direct testing instrument for checking the compressive strength of cardboard boxes or other packaging containers It is used to determine the compressive capacity of cardboard boxes and can be used for testing the holding pressure stacking The test results can be an important reference for the height of finished packaging boxes stacked in factories or an important basis for designing packaging boxes It can execute national or international standards such as GB ISO ASTM BS DIN JIS for testing and is an ideal testing and research equipment for various factories technical supervision departments commodity inspection institutions research institutes and colleges and universities 3 Product features 1 The machine structure adopts an aluminum extruded sealing plate treated with advanced baking paint with builtin highprecision low resistance gapless double ball screws and guide columns improving load efficiency and structural rigidity 2 The control system adopts Panasonic digital AC server to control high response frequency AC motors ensuring high efficiency smooth transmission low noise and speed accuracy within 02 of the transmission system 3 The microcomputer system uses a commercial computer as the main control machine combined with our companys TM testing software to complete all experimental parameter settings working state control data collection and analysis processing result display and printing output 4 The product performance is stable and reliable with high measurement accuracy powerful testing software functions and easy to understand operation
Plant Capacity- 8000 barrels/day Major Equipment- Flare Stack, RTRP Pipe, Duplex SS Pipe, Reciprocating Pump, Filter Feed Pump, Chemical Injection Skid, Flare Seal Vessel, Separator Vessel, Surge Vessel, Drain Vessel, 440V Switchboard, Diesel Generator, Distribution Board, Cables, Local Control Stations, Motor Operated Valves (Actuators), MOV Local Isolator, 440V Motors, 110V DC Supply Unit Process Description- The Water Injection Pilot is required to study the performance of Dharif Reservoir under water flood. The pilot will be located in Dharif field. The source water well will be located approximately 1.5 Km from the pilot plant. The pilot plant will mainly comprise of variable speed electro-submersible pump unit installed in source well (by others), 2 phase water / gas separator, drain vessels booster pumps, surge vessel, HP injection pumps, filtration plant for water quality maintenance, chemical injection skids for scale, corrosion oxygen and biocide control as well as for filtration aids, water transmission lines, guard filters, associated piping, instrumentation and controls, power generation auxiliaries and other utilities including air assisted flare system. The submersible pump installed in the source well will bring up the 4th sand reservoir aquifer water at about 375 psig pressure and flow it to the pilot plant, where water will pass through a 2 phase water / gas separator, filtration package (deep bed media filters), surge vessel and guard filter before the injection well head. The filtration system shall eliminate the particles higher than 1 micron before it is flowed into injection pump units. The pumping facility will be suitable to pump out water at flow rate up to 8000 BWPD at pressure ranging from 3000 psig to 6000 psig at the injection well head. Booster pumps will take suction from the 2 phase separator and pump the water through the filters to the Break tank from where the HP injection pumps will pump it to the injector well. The water pumped by the HP pumping facilities will then flow through a 4" dia. flow line to the injection well, Flow and pressure variation is achieved by the variable speed drive controller of the HP Injection pumps.
Pico Touch Screen Portable Professional Q switched Nd Yag Laser Professional Blackhead Cleaning Tattoo Removal Machine. Applications: 532nm wavelength: get rid of freckles, eyebrow tattoo, failed eye line tattoo, tattoo , lips line, pigment, telangiectasia in shallow red, brown and pink and etc. light color 1064nm wavelength: get rid of freckles and yellow brown spot, eyebrow tattoo, failed eye line tattoo, tattoo, Birthmark and Nevus of Ota, pigmentation and age spot, nevus in black and blue, scarlet red, deep coffee and etc. deep color. 1320nm wavelength: shrink pores removal, poblackhead removal, skin tightening and whitening, skin rejuvenation, wrinkle removal . Working Principle: The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system. The 1064nm wavelength will shatters and removes the black and blue pigments while the 532nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue Specialty of QM-Q1 New Medical and Elegant design Ergonomic design handle, super long lifespan which can reach 2 millions shots ! 2. 3 Laser tips: 532nm, 1064nm, 1320nm can meet different pigments and black doll treatments Non-pain tips are for option Technical Specifications: Peak Power 500W Wavelength (Spectrum) 1064nm & 532nm (1320nm optional) Energy Density (Fluence) 1-2000mJ Spot Size 2-7mm Pulse Repetition Rate 1-10Hz Pulse Duration
Pico Touch Screen Portable Professional Q switched Nd Yag Laser Professional Blackhead Cleaning Tattoo Removal Machine. Applications: 532nm wavelength: get rid of freckles, eyebrow tattoo, failed eye line tattoo, tattoo , lips line, pigment, telangiectasia in shallow red, brown and pink and etc. light color 1064nm wavelength: get rid of freckles and yellow brown spot, eyebrow tattoo, failed eye line tattoo, tattoo, Birthmark and Nevus of Ota, pigmentation and age spot, nevus in black and blue, scarlet red, deep coffee and etc. deep color. 1320nm wavelength: shrink pores removal, poblackhead removal, skin tightening and whitening, skin rejuvenation, wrinkle removal . Working Principle: The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system. The 1064nm wavelength will shatters and removes the black and blue pigments while the 532nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue Specialty of QM-Q1 New Medical and Elegant design Ergonomic design handle, super long lifespan which can reach 2 millions shots ! 2. 3 Laser tips: 532nm, 1064nm, 1320nm can meet different pigments and black doll treatments Non-pain tips are for option Technical Specifications: Peak Power 500W Wavelength (Spectrum) 1064nm & 532nm (1320nm optional) Energy Density (Fluence) 1-2000mJ Spot Size 2-7mm Pulse Repetition Rate 1-10Hz Pulse Duration
PEEK polymer plastic material is a kind of semicrystalline aromatic polvmer and its main chain of macromole is consist of arvl. ketone, and ether. PEEK polyetheretherketone properties have heat resistance, chemical stability as thermosetting plastics, and good processability as thermoplastics. At present, polyetheretherketone PEEK is one of the polymer materials with excellent properties. PEEK Material Properties As one of the professional PEEK material manufacturers in China, ZYPEEK provides mainly two types of PEEK raw materials: pure resin and PEEK compounds. According to flow from low to high, there're 3 main grades: 770, 550, and 330. According to the form and processing method, there're 6 series: Powder (P), Fine Powder (PF), Granules (G), Glass Fiber Reinforced (GL), Carbon Fiber Reinforced (CA), Friction & Wear Resistant (FC). Besides the existing 52 grades, we could also provide customized PEEK composite materials according to the customer's actual requirements. Our polyetheretherketone PEEK products are widely used in injection molding, extrusion molding, compression molding, spraying, etc. You can also find more info about PEEK material applications in our application section. PEEK Raw Material Products FAQs î?? The main characteristics of PEEK raw material? ZYPEEK mainly adopts the preparation method of nucleophilic high-temperature displacement reaction to prepare PEEK raw materials. It effectively guarantees the stability and consistency of polyetheretherketone PEEK product quality, as well as the constancy of color and purity. î?? What field is PEEK raw material mainly used in? You can find the application of PEEK material in the electronic semiconductor industry, analytical instruments, industrial machinery, automotive industry, aerospace, petrochemical, and other fields. What are the characteristics of polyetheretherketone? Mechanical properties Self-lubrication Chemical resistance (corrosion resistance) Flame retardancy Peeling resistance Fatigue resistance Radiation resistance Hydrolysis resistance. î?? What is the basic PEEK material specification? PEEK raw material is compound modified with high temperature resistant structural materials and electrical insulating materials to produce various grades of compound modified special materials. For more information about polyetheretherketone cost and buy peek , please feel free to contact us! If you need any kinds of polyetheretherketone peek, please contact us, as a professional peek suppliers, ZYPEEK is willing to offer you high quality products.
OST Photonics offers various functional crystal materials for laser systems, optical equipment and instruments. Crystals are divided into six types according to their functions: laser crystals (diffusion bonding crystals, Nd:YAG, Er:YAG, Yb:YAG, CTH:YAG, Nd:Ce:YAG, Nd:YVO4, Nd:GdVO4, Nd:YLF, Pr:YLF, Ho:YLF, Tm:YLF, Ti:Sapphire, Er:Yb: Glass), nonlinear crystals (KDP & DKDP), KTP, LiNbO3, LBO, BBO, BIBO), passive Q-switch crystals (Cr4+:YAG, Co2+:MgAl2O4), birefringent crystals (YVO4, �±-BBO), Magneto-optic Crystals (TGG) and optical crystals (BaF2, CaF2, MgF2, LiF, Germanium single crystal, Sapphire (Al2O3), YAG, ZnSe, Silicon single crystal, ZnS). If you want to know more about our functional crystals, please do not hesitate to contact OST Photonics. What are Functional Crystals? A wide range of functional crystal materials is used in various optical applications. While optical glass is commonly used as a transparent material, different functional crystal materials, primarily monocrystalline materials, are required for diverse applications due to their unique functionalities: In contrast to glass, birefringent crystals can exhibit birefringence, which is a requirement for various types of polarizers, wave plates, birefringent tuners, and other optical components. Commonly used birefringent crystal materials include YVO4, �±-BBO, quartz, calcite and sapphire. The lattice symmetry of a crystal material is not too high (such as a triangular, quadrilateral, or single prism), and it can exhibit nonlinearity. Nonlinear crystals are primarily used for nonlinear frequency conversion but also find applications in optical modulators like the Pokel cell. A wide variety of functional crystal materials can be used as laser crystals, serving as host materials for laser-active dopants (rare earth ions or transition metal ions). They typically exhibit relatively high transition cross sections, small gain bandwidth, and good heat conduction compared to laser-active glasses. In general, they also allow for higher doping concentrations. In some cases, functional crystal materials are used in spectral regions where glass does not have a wide enough wavelength range and high transmittance. In particular, various materials such as zinc sulfide (ZnS), zinc selenide (ZnSe) and Sapphire (Al2O3) are used as infrared crystals, and other materials such as lithium fluoride (LiF), calcium fluoride (CaF2) and magnesium fluoride (MgF2) are used as ultraviolet crystals. Some functional crystal materials, such as terbium gallium garnet (TGG), exhibit the Faraday effect (polarization rotation caused by magnetic fields), and they can be utilized in devices like Faraday rotators and Faraday isolators.
Precision CNC milling parts Completed by CNC milling and forming grinding Accuracy of our custom cnc machining milling parts can be achieved within �±0.002mm. Main products: all kinds of precision parts, connectors, fixture, standard parts, mold design, development and manufacturing. Business projects: precision molding grinding, precision EDM, CNC wire cutting, precision milling machining. Independently research and develop and design automation production machine, to solve the human bottleneck problem and production obstacles for clients. Customized customer demand, research and develop automated production in accordance with the customer production planning. Automated assembly production, share client capacity, OEM production to finish customer delivery. We cooperated with the businesses from different countries and regions Japan ABLE, Belgian Accuritas, Taiwan Cheng Wei Precision Industry Co., Ltd., Cheng Ming Electronic Science and Technology Co., Ltd. (Dongguan) Our company wants to establish long-term cooperative relationship with the following types of foreign enterprises: Electronics, automotive, electrical machine, electrical equipment, instrumentation, home appliances, communications and other industries. The column and base support the remaining parts of a milling machine, and the spindle is lubricated by an oil reservoir and pump in the column. The base supports the column and includes a coolant reservoir and a pump for coolant delivery during machining operations. Knee The gearing mechanism is housed inside a knee. Dovetail ways connect the knee to the column. A vertical positioning screw, often known as an elevating screw, supports and adjusts it. The elevating screw moves the knee up and down by raising or lowering the lever using a hand or power feed. Saddle and Swivel Table The table is supported by the saddle, which is on the knee. In horizontal milling m/c, the saddle slides on a horizontal dovetail on the knee, and the dovetail is parallel to the spindleâ??s axis. The saddle swiveled (revolved) horizontally in both directions, and the swivel table was attached to it. Spindle A milling machineâ??s cutting tools are held and driven by the spindle. It is supported by the column and is positioned on bearings. An electric motor drives the spindle using gear trains located on the column. The spindle face, close to the table, is machined with an internal taper. The front face has two keys that give a positive drive for the cutter holder or arbor.
A Complete Guide To Gate Valve The gate valve is the most common shut-off valve. Unlike ball valves, they are not quarter-turn devices; instead, they close and open through revolutions of the hand wheel. Used in wastewater plants, power plants and process systems, the threaded system of the gate valves give them an advantage over the quarter turn system of the ball and butterfly valve in large applications. Fluid through gate valves experiences only minimal pressure drop as gate valves allow total flow through its passage when fully open. This post discusses the functions, symbols, advantages and disadvantages, types, and other essential things you need to know about the gate valve. What is A Gate Valve? Gate valves can also be called sluice valves or knife valves. They are control valves that allow or restrict the flow of media completely. Gate valves use a flat gate to close off flow between pipe flanges. A gate valve, being a full port valve, has an equal diameter to the pipe through which the fluid passes. Hence, unlike butterfly valves, gate valves minimise pressure losses in the fluid when fully open. Also, because of the equal pipe and valve diameters, gate valves allow for the movement of pigs within the pipe for cleaning and inspection operations. While butterfly valves can be used in flow regulation and on-off services, gate valves should only be used in on-off services as blocking valves and also to allow fluid flow. They should not be used in throttling. Because of their uncomplicated construction and capability to be used in different low-pressure applications, gate valves are one of the most common valves in the industry. Gate Valve Symbol The gate valve symbol is composed of two triangles meeting at a point. A vertical line is inserted between the triangles, and solid horizontal lines extend from the opposite sides of the triangle. The vertical line indicates the blocking operation of the gate valve, and the horizontal lines show that the valve has a two-way function in on-off applications. The gate valve symbol used in piping and instrumentation diagrams (P&ID) is a modification of the valve symbol, which is the gate valve symbol without the vertical line between the triangles. The three isometric symbols in the diagram indicate symbols for butt-welding end connections, flanged ends, and socket ends connections.
Iron Oxide Powder For Sale Iron oxide is an amorphous powder with red or dark red appearance. The chemical formula is Fe2O3. relative density 5~5.25, melting point 1565â??. Iron oxide is insoluble in water, soluble in hydrochloric acid and sulfuric acid, slightly soluble in nitric acid. Iron oxide pigment is the second largest inorganic pigment after titanium dioxide and the first largest colored inorganic pigment. It mainly contains iron oxide red, iron oxide yellow, iron oxide black and iron oxide brown pigments with iron oxide as the basic substance. In addition, more than 70% of all consumed iron oxide pigments are prepared by chemical synthesis methods, called synthetic iron oxide, such as green iron oxide, etc. ...... We can supply iron oxide pigments in various colors. Browse the products below to find the pigment you need, or contact us if you need help. We will help you select the right iron oxide pigment for your unique needs. Iron Oxide Pigment Usage As an inorganic pigment, it is used for coloring paints, rubber, plastics, construction and so on. Used as antirust pigment in paint industry. Used as coloring agent for artificial marble, terrazzo on the ground, coloring agent and filler for plastics, asbestos, artificial leather, leather polish, etc. It is also the polishing agent for precision instruments and optical glass, and the raw material for manufacturing ferrite components of magnetic materials. ...... As magnetic raw material, it can be used in electronic industry, communication equipment, TV sets, computers as well as line output transformers, switching power supplies and ferrite cores. Used as analytical reagent, catalyst and polishing agent, also used as pigment component. Used for coloring the outer sugar coating of various pills. Used in the preparation of magnetic materials, pigments, and reducing agents, polishing agents, catalysts, etc... Used as anti-paint pigment. As the mica iron oxide antirust agent made of this product has good water permeability resistance and excellent antirust performance, it can replace reddan. Synthetic iron oxide is characterized by high purity, even and neat particle size and wide range of chromatography. At the same time, the variety of colors, low price, non-toxic, excellent coloring is also the reason for its wide application. In addition, it has the ability to absorb ultraviolet rays. Various excellent properties make it widely used in building materials, coatings, plastics, electronics, medicine, rubber, ceramics, ink, magnetic materials, paper making and other fields.
Titanium tubes come in various grades, each with specific properties suited to different applications. Titanium alloys are known for their excellent strength-to-weight ratio, corrosion resistance, and biocompatibility, making them ideal for a wide range of industries, including aerospace, medical, chemical processing, and marine. Here are some common grades of titanium tubes: Grade 1 (UNS R50250): Commercially pure titanium with excellent corrosion resistance, high ductility, and good weldability. Grade 1 titanium tubes are often used in applications where corrosion resistance and formability are essential, such as chemical processing equipment, heat exchangers, and marine components. Grade 2 (UNS R50400): Commercially pure titanium with slightly higher oxygen content than Grade 1, resulting in improved formability and moderate strength. Grade 2 titanium tubes are widely used in aerospace, marine, and medical applications, as well as in heat exchangers, piping systems, and condensers. Grade 5 (Ti-6Al-4V, UNS R56400): An alpha-beta titanium alloy containing 6% aluminum and 4% vanadium, offering excellent strength, toughness, and corrosion resistance. Grade 5 titanium tubes are commonly used in aerospace, automotive, and biomedical applications, as well as in high-performance sports equipment and marine components. Grade 9 (Ti-3Al-2.5V, UNS R56320): An alpha-beta titanium alloy containing 3% aluminum and 2.5% vanadium, providing a good balance of strength, weldability, and corrosion resistance. Grade 9 titanium tubes are often used in aerospace structures, bicycle frames, and marine components where high strength and corrosion resistance are required. Grade 12 (Ti-0.3-Mo-0.8Ni, UNS R53400): An alpha-beta titanium alloy containing 0.3% molybdenum and 0.8% nickel, offering excellent corrosion resistance in oxidizing and reducing environments. Grade 12 titanium tubes are commonly used in chemical processing, desalination plants, and marine applications where resistance to chlorides and seawater is critical. Grade 23 (Ti-6Al-4V ELI, UNS R56401): An extra-low interstitial version of Grade 5 titanium with enhanced fracture toughness and biocompatibility, suitable for medical implants and surgical instruments. These are some of the commonly used grades of titanium tubes. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, temperature requirements, and cost considerations. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.