Aluminum alloy is the most commonly used cookware material in the world because of its light weight, fast thermal conductivity, and easy processing and shaping. Most non-stick pans of all types also use aluminum alloy as the base material. Aluminum discs are used to make kitchen utensils, and the use of new materials has become very mature. 1050, 1060, 1100, 3003 aluminum rounds, etc., have good electrical conductivity, thermal conductivity and heat resistance, and are widely used in the production of aluminum pots and pans around the world. Advantages of aluminum discs for non-stick pans: 1. Excellent elongation and tensile strength; 2. Good processing performance, high stamping and stretch forming performance; 3. Gas welding, hydrogen welding, resistance welding, and brazing; 4. High plasticity, electrical conductivity and thermal conductivity; 5. Easy to carry out various pressure processing, extension and bending processing; 6. Excellent corrosion resistance and strong anti-rust properties. The 3003 aluminum discs produced by Hongchang Aluminum are aluminum alloy materials that meet the performance requirements of non-stick pans. The 3003 aluminum discs are a typical Al-Mn alloy. This material has good formability, very good corrosion resistance and Weldability. The non-stick coating in the non-stick pan produced with it should be smooth, the color, covering power and gloss should be basically uniform, without bubbles and falling off, and the coating is completely hot-melted, without obvious defects such as dirt, cracks and explosions.
Oxidized polyethylene waxis made from polyethylene wax after special oxidation process. The molecular chain has certain functional groups, so its miscibility with polar resin has been significantly improved. Due to a certain amount of carbonyl and hydroxyl groups in the molecular chain of oxidized polyethylene wax, the compatibility with fillers, pigments and polar resins is significantly improved. The wettability and dispersibility in polar system are better than that of polyethylene wax, and it also has coupling property. Due to its high melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, plays the role of internal and external lubrication, and has good antistatic property. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced. The lubricity of oxidized polyethylene wax added to the rigid, transparent and opaque PVC formula is better than that of other lubricants. It can also be used as raw and auxiliary materials for textile softener, car wax and leather softener. It can be used as dispersant, lubricant, brightener and coupling agent of pigment or filler such as dense masterbatch, polypropylene masterbatch, additive masterbatch and filling masterbatch. Rubber and plastic processing lubricants, film removers and phase solvents. In the formulation of waterborne coatings and inks, it provides excellent wear resistance, adhesion resistance and scratch resistance At present, oxidized polyethylene wax is widely used in PVC foam board, but it is less used in other aspects due to price reasons. PVC foam board is the most difficult to produce in PVC products, which has the most problems and is the most difficult to solve. The plasticization can be significantly accelerated after adding oxidized polyethylene wax. Here we can see the uniqueness of oxidized polyethylene wax.
Exceptional Quality: Sourced from the premier coffee regions in Brazil, our beans are handpicked to deliver a superior flavour and aromatic experience. Versatile Options: Available as both roasted and green beans to suit every coffee enthusiastâ??s preference. Rich Tasting Notes: Indulge in a complex flavour profile with delightful hints of chocolate, nuts, and fruity undertones. Commitment to Excellence: Crafted with care and dedication to ensure an unparalleled coffee experience with every cup. Our Values Sustainability: We implement environmentally friendly practices to protect our planet for future generations. Fair Trade: By working directly with farmers, we ensure fair compensation for their hard work and dedication. Quality Control: Each batch undergoes rigorous quality checks to ensure only the finest beans reach your cup. Origin: Brazil Grade: Specialty Coffee Association (SCA) score of 80 and above Available Forms: Roasted beans, Green beans Flavour Profile: Chocolate, nuts, fruity undertones Roast Levels: Light, Medium, Dark (for roasted beans) Packaging Sizes: 250g, 500g, 1kg Storage: Keep in a cool, dry place away from direct sunlight
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Powder Free/powdered latex examination gloves, non sterile, single use,white/light yellowcolor. Ambidextrous with beaded cuff 1) Gloves Recommended Applications: Emergency services, laboratories, pharmaceutical and cosmetic industries, catering, cleaning, general industry. 2) Gloves Materials: 100% latex Rubber 3) Gloves Size: S-XL 4) Gloves Packing: 100 pieces will be packed into a dispenser box. The number contained in each dispenser box determined by physical count. 10 dispenser boxes are packed in 2 layers of 5 giving 10 dispenser boxes inside export quality shipper carton (outer). 5) Gloves Packaging specifications: For shipper carton Inner box size: 22*12*6cm carton (outer) size: 31*25*22cm 6) Gloves Storage Conditions: The gloves will maintain their properties when stored in dry conditions out of direct sunlight at between 10 to 30 degrees C. 7) Gloves Shelf Life: The gloves shall have a shelf life of 5 years from the date of manufacture when stored in compliance with the above storage conditions.
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
DwallsBed provide an innovative, space-saving solution for residential and commercial buildings, as these fixtures combine style and functionality with ease. These versatile wall beds maximize your space usage by conveniently folding up when not in use, offering ample room for daily activities. DwallsBed offer the combined luxury of a wide, open space during the day and an uncompromisingly comfortable bed at night. Our cabinets open with an easy pull and transform into a fold-up wall bed in seconds. They are light to the touch and will hover safely if let go of midway while lowering the bed. Requires attachment to the wall only at the top of the cabinet with small brackets, No attachment to the floor needed Passes reliability testing of 15,000 bed raising and lowering cycles Designed with durability and style in mind, DwallsBed â??s unique fold-up wall beds cater to the needs of contemporary living spaces. Donâ??t miss out on the opportunity to optimize your space; choose DwallsBed to create a multi-functional room that suits your lifestyle.
Key Attributes - Grade : Super Quality - Form : Whole , Unshelled - Colour : Light yellow - Broken/Split nuts : 0.5% max - Oil Content : above 45% - Water content : 5% max - Acid : free fatty acid, 0.07% - Foreign matter : nil Other Attributes - Storage type : Dry - Other Names : Kemiri / Aleurites moluccanus / candleberry, Indian walnut - Shelf Life : 2 year (vacuum) or 3 months (non vacuum) - Place of Origin : Nusa Tenggara Timur / Sulawesi Selatan / Medan - Cultivation type : Natural - Packing type : Vacuumed or non Vacuumed - Packing Qty : 100 gr/ 500 gr / 1 kg / 2 kg or bulk 25 kg - Outer Packaging : 10 kg/Carton (for vacuum candlenut) 25 kg /Bag (for non vacuum candlenut) - OEM Labeling : Available Delivery - Port : FOB Surabaya - Supply ability : 400 Ton/Tons per months - Lead time day(s) : 7 days
One of the most natural remedies used in oriental countries. Pure source of beauty and color, Moroccan henna powder with herbals is usually used for body art and tattoos. As itâ??s applied to dye and cure hair and skin. It strengthens eyelashes and eyebrows, nourishes and softens the skin. This flowering plant grows in Morocco and its young leaves are dried out, milled and sifted to get green-brownish or light green powder. More than tanning agents of henna, this organic product provides precious gum and organic acids, vitamins C and K. It improves hair structure, by making it thicker and glossier. It eliminates the dandruff as it nourishes splitting and damaged locks and even cures hair loss. Moreover, its bactericidal and fungicidal action cleanses the scalp. Pure and without additives, this natural henna combines a 100% natural coloring, warm auburn color, with a wonderful natural care that will give volume, vigor and shine to the hair. Its bactericidal and fungicidal action cleanses the scalp. Of superior quality, this henna from Morocco is 100% pure and freshly ground.
CASHEW KAJU W-180 W-210 W-240 W-320 W-450 W-500 medium size salted and roasted, best price, best quality, Cashew Nuts W180, W210, W240, W320, W450 - Cashew Nuts - Color: White/ Light Ash - Style: Dried - Inspection: SGS - Moisture 7% max - Foreign matter 1%max - Broken 5% max - Nut count: 170 - 220 per kilogram - Out turn: 47 - 53 lbs - Defective: 10% maximum SPECIFICATION OF RAW CASHEW NUTS Grade: White Wholes: W240, W280, W290, W320, W450 W500 Scorched Wholes: SW, SW180, SW210, SW240, SW320, SW450, SW500 S (Splits): LWP(Large white pieces), SWP(Small white pieces) Categories: Dry Fruits, Nuts & Dry Fruits Tags: Buy Cashew, Buy Cashew Nut, Buy Kaju, cashew, Kaju GOA KAJU roasted and salted, namkeen kaju, Crispy Cashew nuts, Freshly packed natural salted whole Cashew nuts, Store in a cool, dry place in an airtight container and preferably refrigerate after opening. Ocean Links Corporation ----Your trust is our power----
bestscooterstore * com Product Description MOTOR SyncDrive Pro, 85Nm, powered by Yamaha CONTROLLER RideControl Ergo 3, grip integrated DISPLAY RideControl GO, frame integrated LED displayANT+ Wireless display compatible BATTERY EnergyPak Smart 625WhEnergyPak Plus range extender compatible FRAME ALUXX SL-grade Aluminum, Advanced Forged Composite Upper Rocker, 160mm Maestro suspension system, 'Boost' 148x12mm, UDHTM derrailleur hanger FORK RockShox Domain R 29er, 170mm travel, 15x110 Boost, Maxle Stealth, E-bike Approved SHOCK Fox Float DPS Performance, EVOL Large Volume sleeve, 2-position lever, 205x62.5mm Trunnion mount, custom tuned HANDLEBAR Giant Contact Trail, 35x800mm GRIPS Giant Tactal Pro-E, single lock-on STEM Giant Contact SL 35 SEATPOST Giant Contact Switch, dropper, 30,9mm (S:125, M: 150, L/XL:170) SADDLE Giant Romero Trail PEDALS Flat pedal SHIFTERS Shimano Deore FRONT DERAILLEUR MRP 1X HD2 custom co-molded chain guide REAR DERAILLEUR Shimano Deore 12-speed BRAKES Shimano Deore BR-M4120, 4-piston, hydraulic disc, 203mm BRAKE LEVERS Shimano Deore BL-M4100, I-spec EV CASSETTE Shimano Deore CS-M6100-12, 10-51T, 12-speed CHAIN KMC e.12 Turbo, EcoProteq, e-bike optimized CRANKSET Praxis Wavetm 36T Cold Forged 4130 premium steel Praxis e-Cadet+ custom forged crankarm set (S/M:160, L/XL:165) BOTTOM BRACKET - RIMS Giant AM 29"[F] 27.5"[R], Tubeless ready, 30mm inner width HUBS Shimano MT410 Boost, Center-Lock, [F] 110x15 [R] 148x12mm Micro-Spline Drive Body Thru-axle SPOKES Sapim E-Lite [r] Race [f] TIRES Maxxis Minion DHF 29x2.6" foldable, Tubeless, EXO+, 3C MaxxTerra[F]Maxxis High Roller II 27.5x2.5" foldable, Tubeless, DoubleDown, 3C MaxxTerra Compound [R] EXTRAS Tubeless kit (liquid, valves, levers, manual, tool) LIGHTING Optional:- Giant Recon series e-bike lights available and direct connectable
A-80 2d Omni scanner A9295 2D Wired A-700 barcode scanner Quick scanning without waiting makes work easier!!! Wrinkled barcodes still could be quickly scanned!!! - 300,000 pixels global shutter, with 2M/s Motion Tolerance. - Fast decoding speeds at 120 FPS/s. - Precision: 4 mils (3mils supports customization.) - Easily read the paper, plastic, mobile phones, LCD displays, etc., and even high-precision, wrinkled, damaged, or poorly printed bar codes. - Bright red LEDs for illuminating scanning surfaces. - Read all mainstream 1D&2D bar codes. - Support JPOS/OPOS interfaces â? â??CMOS image fast scanning Up to 200 scans per second, effortlessly handling peak periods. â?¡â??Automatic induction and sleep mode The barcode will automatically light up when approaching, and will be turned off when not in use, waiting for sleep. Scan product barcodes and screen payment code Can be used for daily cash register scanning, mobile phone scanning for payment, and express barcode scanning to meet your different Customized adhesive, printer ribbons ï¼?barcode scanner other products, if you need other specifications, we can feel consult us! Capture any one-dimensional barcode from a distance Wireless Bluetooth function is faster and more compatible Better encryption function enhances security Excellent battery performance increases scanning times Suitable for harsh environments with high dust and humidity Can withstand falling from a height of Quick recognition barcode scanner -2 meters per second motion tolerance and large reading angle. Have strong recognition ability. Fast decoding speed, high recognition rate, both paper and electronic screens can be recognized, and the operation is simple and fast. It can also recognize dirty and damaged codes. A-700 barcode scanner product Features: The A-700 is equipped with advanced software decoding algorithms patented by AiGather, combined with a motion tolerance of 2 meters per second and a large reading angle, providing an extremely smooth decoding experience in barcode scanning and forward scanning. It does not require switching scanning modes and can quickly read various LCD and OLED phone screen codes and printed product codes, expanding the range of decoding applications and improving decoding efficiency. And when not in use, the lights automatically sleep and dim, providing users with a comfortable user experience.
CUTERA is a leading provider of advanced laser and light-based aesthetic systems, and our latest technology, the Enlighten III, is a state-of-the-art device that offers a wide range of benefits for practitioners and patients alike. This versatile system offers a number of different treatment options, including tattoo removal, pigmented lesion removal and skin rejuvenation. The Enlighten III is a powerful laser system that utilizes three wavelengths and three pulse durations, to provide optimal results for various skin conditions. The 532nm wavelength is perfect for treating light pigmentation as well as red and yellow tattoo ink. The 670nm wavelengths is great for treating pigmentation on darker skin types and stubborn tattoo pigments like purple and green. The 1064nm wavelength is ideal for removing dark tattoos, and treating all skin types for pigmentation and is perfect for skin revitalisation, from pores and fine lines to acne scaring. Enlighten combines three highly effective wavelengths (532, 1064, and 670 nm) and dual pulse durations (2 ns and 660/750 ps) to effectively remove multi-color tattoos, and introduce an entirely new approach to gentle, effective and quick improvements in the appearance of unwanted pigment and overall skin quality. A powerfully versatile pico device, enlighten safely and effectively removes tattoos and addresses skin and pigment concerns on all skin types. Tattoos and pigment are comprised of multiple colors which require multiple wavelengths to effectively remove. enlightenâ??s three wavelengths and dual pulse durations effectively removes unwanted tattoos and pigment - even those resistant to traditional treatments. enlightenâ??s skin revitalization treatments - PICO Genesis and PICO Genesis FX - safely address pigmentary concerns and induce dermal disruption to remodel the skin and treat acne scars in fewer than three sessions. 2021 Cutera Enlighten III Picosecond Nanosecond Tattoo Removal Laser; Recertification Fee Waived with the New Owner being Responsible to Pay for Cutera Installation & Training Fees; Manufactured on 02/05/2021; Reason for Selling: Not Using; Also Includes: Articulating Arm, Footswitch, External Shield Goggles, (2) 670NM 1064NM NMX Eyewear, (2) 532NM 1064NM NMX Eyewear, (2) Purple Cases, Cleaning Kit, (10) Disposable Disinfectant Wipes, Key, Interlock, Safety Sign, Enlighten Handpiece Replacement Cable, Operators Manual.
Fused Magnesite Large Crystal FMLC) Most of the manufacturers of large crystal fused magnesia supply high quality 97/98 large crystal fused magnesia, large crystal fused magnesia is made of selected grade A natural magnesite or high purity light burned magnesium particles fused in electric arc furnace. The product has high purity, large crystal particles, compact structure, strong slag resistance material, good thermal shock stability, is an excellent high temperature electrical insulation material, is also an important raw material for high-grade magnesia brick, magnesia carbon brick and amorphous refractory material. Large crystal fused magnesium has high purity, large crystal particles, compact structure, strong slag resistance material, good thermal shock stability, is an excellent high temperature electrical insulation material, is also an important raw material for high-grade magnesia brick, magnesia carbon brick and amorphous refractory material. The use of large crystal fused magnesium: Large crystal electric melting magnesium is mainly used in refractory materials, spray filler, electric fusion ramming material, furnace filler, coating material, refractory mud, building materials, etc., is made of pure natural high purity light burned magnesium powder by 3000KVA electric melting and large crystal electric melting sand, is a senior alkaline refractory material. With high purity, good ratio of calcium to silicon, large crystal size, stable physical and chemical properties, mainly used in metallurgy, chemical industry, electrical appliances, aerospace and national defense and other industrial fields.
