IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
# Product material:carbon steel,stainless steel,aluminum,Glass Fiber Reinforced Plastic #Product surface:Polished,Aluminum Oxidation Spray coated Hot dipped galvanized Galvanize Plain Steel,zinc aluminum magnesium # Product size:1-5/8"x 1" , 1-5/8"x 13/16", 1-5/8"x 1-5/8", 1-5/8"x 2-7/16", 1-5/8"x 3-1/4"(41 x 25 mm, 41 x 21 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm) # Product thickness: 18 GA 17 GA 16 GA 15 GA 14 GA 13 GA 12 GA (1.0 mm,1.2 mm,1.5 mm 1.8 mm 2.0 mm ,2.5 mm) , Others also welcome # Product Length:6' 10' 20' ,1.8 m 2.4 m 2.9 m,3.0 m,5.8 m,6.0 m ,Cut to Length upon request. # Application:Cable management support,Pipe and conduit supports,HVAC Duct Support,Pillar racking system,ceiling grid support bracket,Machine support protection,Solar panel bracket. We can offer # Full line of solid strut channel, slotted strut channel,welded strut channel, hole and patterns are available # Full line of fittings, clamps and strut supports # Wide variety of strut materials and finishes Hot questions Q1: Are you manufacture? A: No,we have partner in Wuxi Langfang city. Q2: How can I request product samples? A: The samples are free but courier charge will be collected. Please send us samples list and courier account number. Q3: How can I request a product catalog? A: The hard copies of catalogs are free but courier charge will be collected.The PDF catalog we can send to you by email or chap App. Q4: What is your payment terms? A: 30% T/T deposit,balance against B/L copy; Irrevocable L/C 100% at sight and irrevocable. Q5: How about the delivery time? A: Accord to your order list and quantity,mostly delivery in 30 days. Q6. Why choose us? 1. We are Songyin Leading supply of Strut Channel and Fittings. 2. Inspected by the Inspection Institution by standard of DIN-ISO-2768 3. 100% QC inspection before Shipment.
1. Raw materials: Our edge banding use high quality PVC and ABS as raw materials. Imported PVC particles comply with environmental protection standards, high purity, without any other materials, and it is also more environmentally friendly. 2. Clear texture: We are now using four color printing process by single extrusion which is more different from normal transfer printing process. It can make clear texture and looks like real wood edge banding. 3.Good abrasion resistance: All of our edge band surfaces have UV, it has high color stability, no easy to fade, anti detergent. So, cleaning agent can be used. 4. Color stable: Chuangxing's edge banding is not easy to fade. It's made of pure raw material, with scientific formula and according to the SGS standard. 5. Accurate size: Chuangxing's edge banding is produced by the imported professional assembly line, with stable quality. It won't affect the processing or use due to the size deviation. 6. Colorful design: Chuangxing matches colors by computer system, we focus on keeping same color after trim, now we have more than 400 colors of copper plates available. 7. Good flexibility: Even on a small plate with bending radius, our edge banding won't have wood grain fracture. 8. Stable expansion: the size stability of our edge banding is good, there won't be any excessive shrinkage or expansion due to a large temperature difference. 9. Small glue-line: Our edge banding is in the shape of internal bending, the hot-melt glue-line is the smallest after sealing, the appearance performance is better, and the moisture resistance will be the largest satisfied while the dust is prevented from entering. 10. The back coating of our edge banding has fluorescent agent, it can glimmer under the currency detector, so it's convenient for customer to identify. 11. Easy to processing: Our back coating is suitable for all kinds of hot-melt, so we can ensure not easy to fall and the bending will be more solid. 12.Good practical performance: Our edge banding can be uniform in thickness, smooth surface, clear texture, base color and print color, without any white appearance while trimming or bending.The bottom glue also has good effect, it has low requirement of sealing temperature, so that sealing can be more convenient and quick.
SPECIFICATION FOR GRADE A FROZEN CHICKEN PAWS & CHICKEN FEET Quality: Grade A Average Weight: 35-45 grams/piece Average Length: 8cm-12cm Freezing Process: BQF (Block Quick Frozen) Shelf Life: 24 months APPEARANCE: Clean No Yellow Skin No Feathers No Bad Smell No Blood No Black Pad No Bruise No Chemical Burns Broken Bones Less than 2% Moisture Less than 1% Chicken paw pad retained and without damage FROZEN CONDITION: Blast Frozen at -40 o C Stocked at -18 o C Frozen Whole Chicken, Raised Without Antibiotics Buy Quality Grade A Halal Frozen Whole Chicken. Our main objective is to satisfy our customers and maintain a long-term business relationship. Also our whole chicken are specially hand Slaughtered to Islamic (HALAL) and international requirements. We maintain a strict adherence with all humane animal treatment and slaughter requirements, including cut accuracy. We supply FOB / CIF any port without any problem. Our product meet the SGS testing. Whole Chicken Specifications Product: Frozen Whole Chicken Product Origin: Russia Packaging: 10Kg Carton Quality: Grade A Certification: HALAL, ISO 9001:2008, FSSC 22000:2010 Storage Conditions: -18 C and lower Freezing Type: IWP, IQF Shelf Life: 12 Months MOQ: 27MT (1*40 Container) Detailed Description: Washed and clean. No blood. No bad smell. Without yellow skin. No feathers. No bruises. Broken bones: under 3%. Moisture content: less than 1%. No black pads. Drainage: 0 to -5°C for 8 hours. No traces of carved deep wounds. No ammonia burns. Weight: 700g-2500g 100% Fresh and Frozen Safe for human consumption CHICKEN PARTS; 1. frozen whole chicken 2. frozen chicken feet 3. frozen chicken paws 4. frozen chicken breast 5. frozen chicken thighs 6. frozen chicken drumstick 7. frozen chicken leg quarters 8. frozen chicken wings 9. CHICKEN GIZZARDS 10.CHICKEN LIVER 11.boneeles skinless chicken fillets, and all other chicken parts Buy Whole Chicken Parts online,Chicken feets for sale near me,Buy chicken paws online,Chicken wings for sale cheap - Order chicken drumsticks wholesale prices,Chicken Drumsticks for sale,Buy Chicken Drumsticks online,How to buy Chicken Drumsticks online,Halal Chicken drumsticks suppliers,Halal Chicken drumsticks wholesalers - Buy Chicken Legs without tail,Chicken Legs for sale cheap,Best place to buy chicken legs,Order chicken legs with fast delivery,Halal chicken legs suppliers
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
Discover Luxus Export's Cake Box Collection Elevate your cake presentation with Luxus Export's diverse cake box range, tailored to suit every need. Our collection includes Window Cake Boxes, Plain Cake Boxes, and Printed Cake Boxes, offering unique features to enhance your cakes' packaging and display. Window Cake Box - Showcase Your Creations: Our Window Cake Boxes, available in sizes from 500 GM to 2 KG, feature transparent windows for a tantalising view of your cakes. Perfectly sized and crafted with dimensions ranging from 8"x8"x5" to 12"x12"x6", these boxes combine elegance with functionality, ensuring your cakes remain protected while captivating customers with their enticing display. Plain Cake Box - Simple Elegance, Maximum Impact: Opt for our Plain Cake Boxes for a minimalist yet sophisticated packaging solution. Available in sizes suitable for 250 GM to 1 KG cakes and in refined colours like Peach, White, Mint, Blue, and Pink, these boxes provide a timeless backdrop that allows your cakes to shine on any occasion. Printed Cake Box - Personalise Your Brand: Personalise your cake packaging with our Printed Cake Boxes, available in sizes from 250 GM to 1 KG. Choose from our selection of eye-catching designs or customize with your own branding. These boxes add a unique touch to your cakes, leaving a memorable impression on your customers. Customisation Options - Tailored to Your Needs: At Luxus Export, we offer customisation options to ensure your cake boxes reflect your brand identity perfectly. Whether you need a specific size, color, or design, we can accommodate your requirements, allowing you to create packaging that truly represents your brand and delights your customers. Order Now and Elevate Your Cake Presentation Transform your cake presentation with Luxus Export's premium-quality cake boxes. Whether you prefer the transparency of our Window Cake Boxes, the elegance of our Plain Cake Boxes, or the personalization of our Printed Cake Boxes, our collection has everything you need to impress your customers. Order now and take your cake presentation to the next level.
Lifetime 20ft x 8ft (6 x 2.4m) Rough Cut Dual Entry Outdoor Storage Shed - Model 60351 Features - Made from High-Density Polyethylene (HDPE) - The Rough Cut texture has the natural look and feel of wood without the maintenance of painting or staining - Customisable shelving - UV and weather resistant - Floor included - Level base required Lifetimeâ??s 20-foot wide sheds are not only built for superior strength and durability, but they also have an attractive appearance and design to accent the beauty of your garden. The convenient, centralised location of the doors allow for easy access to your storage without having to climb over things to reach items stored in the back. The innovative design and durable construction create the perfect solution to your storage needs. Features: Made from High-Density Polyethylene (HDPE) The Rough Cut texture has the natural look and feel of wood without the maintenance of painting or staining Heavy-duty steel trusses provide additional roof strength UV protected to prevent weather damage High-pitched roof allows for quick drainage of rain and snow 18 wall hooks and 1 rectangular shelf (W 228 x D 22 cm) and 2 corner shelves (24cm radius) included for custom organisation Lockable steel-reinforced doors (lock not included) Low maintenance design Skylights allow natural light to illuminate interior Two screened vents allow airflow Assembly time: 3 people, 10-12 hours Dimensions Footprint: W 606 x D 237 cm External: H 241 x W 606 x D 243 cm Internal: H 190 x W 595 x D 217 cm Internal Capacity: 30.98 m�³ (867.2 ft�³) N.B. Please note a level foundation is required (concrete, slabs, or a timber frame). Please check full contents, footprint and measurements before installation. If you are enlisting the help of a third party to install this product, please ensure that all contents have been received in full and undamaged prior to arranging and paying for installation to take place. Accessories are not included. Premium Installation Service: Choose our Premium Installation Service at checkout with your chosen structure and enjoy the comfort of knowing that installation is taken care of by skilled and trained installers. The installation office will contact you to guide you smoothly through the process and ensure you are happy with your purchase.
TECHNICAL NAME: IRON ORE FROM 63% TO 64%. ORIGIN: PERU QUANTITY: 50.000- 150,000 MT PER MONTH. PACKAGING :BULK CONTRACT :SUPPLY YEAR 2.000.000 MT. PAYMENT METHOD: SBLC / DLC TRANSFERABLE, DIVISIBLE and IRREVOCABLE. MT 760 DIVISIBLE AND TRANSFERABLE /MT 103 - TT- WIRE (TOP 25 BENCH). TYPE OF CONTRACT AND VALUE OF PRODUCT: FOB Port of Peru USD 72 MT DURATION OF THE CONTRACT: 12-MONTH CONTRACT, RENEWABLE BY AGREEMENT OF THE PARTIES. CERTIFICATIONS :SGS OF QUALITY AND QUANTITY AT PORT OF ORIGIN. VENDOR COMPANY: MAKES CONTRACT AND OFFERS 2% PERMANCE BOND GUARANTEE TO THE BUYER. Additional Information: Consider That, Once The Contract Has Been Signed, The First Shipment Will Be Made 15 Days After The Payment Document Has Been Accepted, And Successive Deliveries Every 30 Days. COMMERCIAL PROCEDURE 1.- The buyer issues an official order (LOI / CPO accompanied by CP company profile), proof of funds (RWA), passport copy and company registration to the seller to which the seller responds with an FCO. 2.- The Buyer as a token of acceptance sends by e-mail the signed and stamped confirmation of the offer submitted by the Seller, with the respective date of acceptance. 3.- Buyer and Seller discuss the conditions set forth in the Draft Supply Contract, as a sign of acceptance, sign the terms and conditions, procedure to formalize the contract, which will be sent via e-mail. 4. The Buyer's Bank shall, within five business days, send the draft financial instrument (SBLC) to the Seller's nominated Bank. 5. The Seller will then send the POP documents to the buyer: A.- Certificate of Origin. B.- Supply commitment. C.- Product passport. d.- Declaration of product availability. Once the draft of the financial instrument is approved, the Buyer's Bank issues the instrument (SBLC) to the Bank designated by the Seller. 7.- Once the Financial Instrument is confirmed, the Seller will send the complete POP and the following documents v�?Ã?Âa Swift from bank to bank: A.- Export Permits of the Product, B.- Certificate of title of the allotment title. C.- Port Storage Contract. D.- Transportation contract to the port of unloading. E.- Quality and quantity certificate from SGS. F.- Bill of Lading (BL). 8.- contract deliveries start as agreed. 9.- The buyer performs an SGS inspection at the port and/or airport of delivery. Note: Immediate availability to load 200,000 MT IRON.
We use the most advanced anti-corrosion efficient ultra-fine fiber coagulation material as the filter body, so that the compressor output air 3m above the solid particles can be all filtered, and very little about 0.01-m oil and water dissolved in the filter When the condensate into a larger oil droplets, accumulated in the bottom of the filter, and then through the bottom of the filter tank back to the siphon pump back to the lubrication system so that the compressor discharge more pure, oil-free compressed air. Technical Parameters 1. Filtration efficiency 99.999% 2. Service life 3500-5200 hours 3. Filtration accuracy: 0.1�¼s 4. Filter material used US HV company glass fiber 5. Compressed air oil content can reach 3ppm or less We also supply other replacement brands air compressor filter: Atlas Copco air compressor filter element Ingersoll Rand air compressor filter element Fusheng air compressor filter element SULLAIR air compressor filter element CompAir air compressor filter element LIUTECH air compressor filter element Screw air compressor Pipe line filter element isused to filter different dismissal of stainless dry stock,corrosion resistance, superior structural performance; seam welded for extra strength, low resistanceto flow. Different accuracy levels of different filter structure,a new "matrix blended fiber" media, larger effective surface area, improves capurerate, enhanced filtering effect. Coated closed cell foam sleeve with resists chemical attack from oils and acids, ensures high efficiencies by preventing reentrainment of coalesced liquids. Advantages: 1.Duarbility and longevity 2.Beautiful design 3.High quality with reasonable price 4.Afford good service 5.Produce according to your sample or drawing 6.Each product individually tested Features: 1.Type:Precision Filter, Filter 2.Filter material: imported fiberglass, filter felt 3.Filter accuracy: 0.01um 4.Application: air compressor 5.Weight:0.5kgs 6.service time:8~12 months 7.sealing material:NBR, VITON 8.Oil content:0.003ppm 9.Flow rate:5Nm³/min
Product Description SPECIALIZED DIVERGE COMP DISC GRAVEL BIKE 2021 As the popularity of gravel riding soars, so does the technology, and the Specialized Diverge Comp Disc is a fine example of a gravel bike that's incredibly capable and versatile, fun to ride and race across a range of terrains, be that gravel, dirt or tarmac. The 9r FACT carbon frame and fork are strong, stiff and light, and use a progressive geometry for stability over the rough stuff and a responsive, agile ride feel. Future Shock 2.0 is an adjustable damper that absorbs impact and prevents you from feeling battered after riding over harsh or bumpy terrains, however when you hit smoother roads and trails, there'll be no compromise on speed. Frame Specialized Diverge FACT 9r carbon, SWATâ?¢ Door integration, Future Shock suspension, threaded BB, internal routing, 12x142mm thru-axle, flat-mount disc Fork Specialized Future Shock 2.0 with Damper, Smooth Boot, FACT carbon, 12x100mm thru-axle, flat-mount Bottom Bracket Shimano threaded Stem Specialized Future Stem Comp, with integrated computer mount Handlebar Specialized Adventure Gear Hover, 103mm drop x 70mm reach x 12-degree flare Bar Tape Specialized Roubaix S-Wrap Front Brake Shimano GRX 810, hydraulic disc Rear Brake Shimano GRX 810, hydraulic disc Brake Levers Shimano GRX RX810 Front Derailleur Shimano GRX RX810, braze-on Rear Derailleur Shimano GRX RX810, 11-speed Shift Levers Shimano GRX RX810, 11-speed mechanical shifting Cassette Shimano Ultegra, 11-speed, 11-34t Crankset Shimano GRX RX810-2 Chain Shimano Ultegra, 11-speed Front Wheel DT Swiss G540 rim, 24mm internal width, tubeless-ready, 24h, Specialized full sealed bearing thru-axle hub, Centre Lock disc, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Rear Wheel DT Swiss G540 rim, 24mm inner width, tubeless-ready, 24h, Specialized full sealed bearing thru-axle hub, Centre Lock disc, alloy freehub body, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Front Tyre Specialized Pathfinder Pro, 2Bliss Ready, transparent sidewall, 700x38mm, clincher Rear Tyre Specialized Pathfinder Pro, 2Bliss Ready, transparent sidewall, 700x38mm, clincher Saddle Specialized Body Geometry Power Sport, hollow Cr-Mo rails Seatpost Roval Terra carbon, 20mm offset Pedals Specialized Dirt
We SHREE ENTERPRISE are offering high-end quality pomegranates to our clients. This fruit is procured from our production farms so that our customers get a range of flawless and nutritive fruits from us. Moreover, we offer fresh Pomegranate that is widely liked by the consumers for its excellent antioxidant properties and rich source of vitamin C and B5, among others. Health Benefits of Pomegranates: Pomegranate contains higher levels of antioxidants. Pomegranate helps manage diabetes, boost immunity, aid digestion, and improve blood flow in our body. It is a good source of vitamin C, vitamin E, folate, potassium, vitamin K & many other nutrients. The antioxidants in the pomegranate and their high concentration are to stall the progress of Alzheimer's disease. Pomegranate juice reduces inflammation in the gut and improves digestion, it also helps lower blood pressure. Drinking pomegranate juice daily improves memory. Greenland fresco as a leading exporter of fresh fruits has always been to supply superior quality of fresh Pomegranates. Indian Red Pomegranates specially Bhagwa variety is widely known for its red deep arils & soft seeds which classify it as seedless. Indian Pomegranates are dark colored with attractive deep red arils which suits it best for table consumption & processing purpose. Bhagwa is a premium quality Pomegranate variety from India. The most comprehensive range of varieties of fresh pomegranate are available at the most reasonable price with excellent quality. In addition to this the shelf life of the fruit is also very high. We are highly active in the export of Indian fresh Pomegranate throughout the year. Indian Pomegranates are suitable for long distance transport due to thick peel. The pomegranate we procure from contracting farming units whose color, shape, size & taste will be superior. Our technical experts visit the farms on regular bases & guide the farmers with latest technology. Specifications : - Color - Red Weight of each fruit - 180 - 400 gm Sweetness - 14 - 16 Brix Net Weight / Box - 2.5Kg/3.0Kg/4.5 Kg Packaging type - Cartoon Box, Tray Storage Temperature - 5 - 7 C Units per Box - 9/10/11/12/13/14/15 Health Benefits : 1. Pomegranates are rich in A B and C vitamin and Minerals such as calcium and potassium 2. It helps in reducing blood pressure, the pomegranate seeds helps in preventing our body from internal blood clot. 3. Pomegranates are rich in various vitamins which increases in the development of immunity to find against microorganisms. 4. Pomegranate helps to pump oxygen level in our blood thus it allows the blood to flow freely in our body.
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function