Model V180TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 650(478)/2,100 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 141 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,550
Model V158TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 680(500)/2,300 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 10.89 Compression ratio 14.6 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 130 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,435
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Model V158TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 480(353)/1,800 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 8.52 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 85 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 40hp/4500rpm (29.41kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 36hp/4500rpm (26.5kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 2 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 539 (33) Maximum output hp(kW)/rpm at crankshaft 18hp/4500rpm (13.2kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Garden gazebo. Garden table with benches and canopy. The best solution for a countryhouse. Own development of the company "RUD E.S." The production uses the best materials from the world's leading manufacturers: industrial varnishes "Renner" (Italy) and thermoplastic paints "Pullron" (Turkey) The canopy roof fabric is Navigator with UV protection and water-repellent properties. Full set. L*W*H - 2200 mm * 2500 mm * 2000 mm Can be equipped with an anti-mosquito tent. Peculiarities: the benches and the table are made of Carpathian spruce boards, treated with Renner antiseptic, coated with Renner varnish (Italy). Industrial furniture varnish with water-repellent additives, resistance to ultraviolet radiation and various weather conditions guarantees durability in harsh operating conditions. The color of the awning is in perfect harmony with the color of the frame and roof. Metal parts are painted with special polyethylene powder paint Pullron, which is anti-vandal, anti-graffiti, repairable and anti-corrosion (do not confuse with polyester powder paints). 20 year warranty on paintwork.
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below 13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Item Petrol Engine Rail Drilling Machine Dimensions (L x W x H) (mm) 650*230*250mm Place of Origin China Model NZG-31Internal Combustion Steel Rail Drilling Machine Internal Combustion Engine Honda Gasoline Engine GX35 Rotate Speed without load 270r/min Rate of Power 1.2KW Driling Diameter 31, 13.5, 9.8 Drilling Time 25s Weight 17KG
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries. This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation. Specification Model YD-22III Type Hydraulic Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2580*2150*1950mm Engine 4-Stroke Gasoline engine Power 9.5kw RPM 3600r / m Hydraulic system pressure 5~6MPa Vibrating frequency 66.7Hz Exciting force 22KN Max . insert force 16KN Clamping force 6.5KN*2 Production efficiency 260 sleepers/ hour Weight 1385kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90 ° Grinding head stroke 45 mm Total weight 61kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
Place of Origin Hubei, China Type railway tools Material steel, Alloy Steel Dimensions (L x W x H) (mm) 220*190*140mm Brand Name Linkage Type: rail fork Product Name: four teeth railway fork Usage: railway tool Color: customized Application: Rail fork track work Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes rail steel fork In the process of transporting and crushing mineral resources, steel forks are needed. In the process of railway line construction and maintenance, steel forks are used to shovel stones. There is no tool that can replace steel forks. If steel forks are used improperly, they will often cause damage to the tools, such as broken teeth or broken handles. During use, you should try to put the steel fork against the ground and insert it into the object to be removed. One is to reduce resistance, and the other is to prevent the steel fork from being overly worn. The handle can be replaced if the handle is broken. If the tooth of the steel fork is broken, then The steel fork is scrapped! The product is made of X-quality rail steel as the raw material, forged as a whole, and quenched, with stable quality! It is widely used in railway maintenance and construction projects, and all railway public works departments and related distributors are welcome to purchase.
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name rail stopper Usage rail stopper Application rail stopper Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
