Main Specifications Opr Wt: 33500kg Track: Japan Hydash Bucket Capacity: 1.5m3 Cabin: Air- Con. Engine: USA Cummins C8.3 Hydraulic: Japan Kawasaki. Overall Length: 11250mm Overall Width: 3190mm Overall Height: 3135mm.
It is in very good condition .
It has a small damage at it's engine.
Product characteristics: 1.This type grab bucket is mainly applied for grabbing raw woods, it can autorotate and the pattern of head connection is decided by our customer. 2.SWL=weight +cross area *length*specific gravity (raw wood: 0.8t/m3) 3.When the diameters of raw wood reach to maximum C, the length of the raw wood should not exceed the standard length--6 meters. 4.When the diameters of raw wood is less than maximum C, the length of the raw wood can be longer accordingly. 5.The diameter of raw woods should not exceed maximum C; the range of wood length can be shorter in the special situation.
Used caterpillar motor grader 140g, id#1009 comes with ripper, push block and cab. Machines is in good working condition and ready to work. Please feel free to contact us if you have any inquiries. Pictures and videos are available in our website.
Excarvator parts.
Nowadays, the excavators of PC100-5 and PC120-5 which Travelling Deceleration Device is adopted the Cyclodal drives mechanism have been widely used in the prevailing marketing. The RV transmission mechanism is made up of involution cylinder gear planet deceleration mechanism and cycloid wheel planet deceleration mechanism. The needle bearing of cycloid wheel planet deceleration mechanism is the weakness tache during transmission due to it's working under bearing heavy force and high revolution. So the RV transmission needs high quality for needle bearing. Actually, the needle bearing is easy to be fraied in practice and must be lead to the abrasion of other transmission components once it's out of order. What's worse, it will result of transmission be paralysed and shorten the using life time of RV transmission mechanism. It also needs to be replaced by three eccentric shafts, two cycloidal gears, six needle bearings and six 33207 taper needle bearings as most of the transmission parts are broken which will consumedly increase maintenance cost. At present, the quality of bearing is not consistant in our market and cause the two mechanisms with high maintenance ratio as using disqualified axletree.
Komatsu undercarriage parts.
PC200-7 air filter and fuel filter . Plywood case, 10kg,20cm*20cm*20cm.
Bucket teeth: tensile strengthí²490mpa, yield strengthí²295mpa, elongationí²22% drop impact test akí² 20. Pallet packing.
Track adjuster grease check valves applied for Caterpillar.
We are manufacturer of grease nipple and grease valve for many years' experience. Range: Grease nipple: Metric size: M6, M8, M10, M12, M14.etc. Inch size: BSP, NPT and SAE. Grease valve: Varies kinds applied for Caterpillar, Komatsu, Hitachi, Kato, Kobelco, Daewoo, and Sumitomo.
Buket Teeth: Caterpillar: J200, J250, J300, J350, J400, J460, J550, J600, J700 Komastu: PC60, PC100, PC200, PC300, PC400, PC650 ESCO: 18, 25, 30, 35, 40, 45, 50, 55 Hensley, Case, JCB, Daewoo, Kobelco, Hyundai, Fiat, Hitachi, HMK, Kawaski, H&L, BOFLRS.
Appliable to Cat, Komatso, Hyundai, Daewoo, Kobelco Parameter:90mm-260mm
Cat, Komatso, Hyundai, Daewoo, Kebelo and oem available Parameter:90mm-260mm
Undercarriage parts for excavator and bulldozer Mainly 20 tons, 30 tons, 40 tons Pc200, pc300, pc400 etc Ex200, ex300, ex400 etc Cat320, cat325, cat330 etc Track roller Material:50mn Hardness:hrc55-60 Hardness depth:5-6mm Carrier roller Material:50mn Hardness:hrc55-58 Hardness depth:5-6mm Idler assy Material:zg40mn Hardness:hrc55-58 Hardness depth:5-6mm Sprocket Material:zg40mn Hardness:hrc50-56 Hardness depth:2.5-5mm Material:40mn2 Pitch:101, 135, 154, 171, 175, 190, 203, 216, 228.
Capacity:0.1m3 to 8m3. Material:Consolidated plate on the bottom, enhance the thickness of side plate, and tooth plate are made of HARDOX500 Which is specialized for rock, so that it can resist grinding and bending efficiently Working Environment:For loading the tough rock and the mineral from the explosion.
Casting process lost wax casting / investment casting / soluble glass precision casting Casting tolerance iso / gb ct9 Casting capacity wall thickness over 8mm, length less than 1 meter, weight between 100gram and 100kgs Casting material plain carbon steel, low alloy steel Casting standard iso, din, gb, aar, bs 20gp, 20tons
Rubber track is a kind of rubber driving band composed of rubber compound, iron core, steel cords and fiber composite material. Rubber track runs on construction machinery, agricultural machinery, tracked carriers and compact tracked loaders. Our bc brand rubber tracks do not need the overlapping bond joint used in traditional tracks, thus the problems associated with traditional rubber tracks are a thing of the past. The weakness of traditional rubber tracks is an overlapping inner cord. The strength of our rubbertracks is that there is a continuous wound wire cord inside the tracks, our tracks are assembled by a specially made machine for the purpose of making a continuous jointless track. We has more experience in jointless rubber track technology. There is no overlapping joint on our steel cord. Therefore most of the problems associated with traditional rubber tracks are solved. Rubber track is classified into conventional type and interchangeable type. We have the ability to produce rubber track for conventional type and interchangeable type for 80series, for the width from 150mm-800mm, almost 1000kinds. Export standard
Rubber pad is one kind of improved and extended product of rubber track, they are installed on steel tracks, its character is easy to installation and do not damage the surface of road. Rubber pad has three types: bolt on, clip on and bulldozer. Feature * less damage to the ground surface; * low noise; * high running speed; * less vibration; * low ground contact specific pre. Comfrotable ride good traction pallet
