BRAND: DOCTEKS SIZE: 43X69 INCH MATERIAL: POLYESTER PRODUCT WEIGHT: 800 OR 900 It is suitable for exterior doors, home entrances, bathrooms, kitchens, gardens, office entrances or kitchen doors with its funny, special patterns and designs that look great in every home. The bottom plastic of the product is pvs recycling. Durable Upper Surface: The upper surface is made of durable polyester felt, which scrapes off dirt, dust, sand, and mud and traps moisture in the shoe. Durable Non-Slip Base: Your colorful decorative mat is 100% waterproof and moisture-resistant. They are perfect for keeping the outside out of your home on rainy, muddy, and snowy days. Perfect Size: The mat's size fits most entrances and its thickness (2.5 mm) is the perfect thickness to avoid getting stuck under most doors. Easy Cleaning: The mop is very easy to clean and wash, you can easily clean it by just holding water under the fountain and shaking it.
Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
Characteristics Standard NFC 17-102/2011 Efficiency T 60 �µs Lightning current withstand test (10/350s) Iimp 100kA Max. current withstanding test Imax 200kA Effective Working Temperature Range tmin / tmax -25C / 90C Electrical Enclosure IP IP65 Central Rod Section sqm 315mm2 Standard deviation PDA < 0.57 PTS Product Specifications Warranty Lifetime On-site testing capabilities Proprietary tester Maintenance & Service Flex detachable modules Width �?120mm Height 445mm Net Weigth 1,8kg Material Stainless Steel / Aluminum Feasibility for protection levels I - II - III - IV ION Generator Unit Double Sustainability 100% Recyclable Pole Fixing Diameter (M) �?60mm Packing Informations Width 135mm Length 480mm Gross Weigth 2,05kg Protection Radius (Rp) Height 2m 3m 4m 5m 10m Level -I- 30 45 61 77 81 Level -II- 32 49 65 84 87 Level -III- 37 56 76 95 98 Level -IV- 41 63 82 105 106
PLA coated paper soup containers have the following features: Anti-leakage: PLA coating can effectively stop the leakage of soup food, ensure that the food will not leak out in the container, and maintain the integrity of the package. Heat preservation performance: PLA coating has a certain heat preservation effect, which can help maintain the temperature of soup food, keep it hot for a period of time, and increase the taste and deliciousness of the food. Hygiene and safety: PLA materials are non-toxic and harmless, and will not release harmful substances when in contact with food, ensuring the safety and health of food. Environmentally friendly and degradable: PLA is a biodegradable material made of renewable plant resources, which is more environmentally friendly than traditional plastic materials. Using PLA-coated paper soup containers can reduce dependence on non-renewable resources and reduce the burden on the environment. Convenient to use: PLA-coated paper soup containers are usually lightweight and easy to carry, which is convenient for consumers to take away or take away. The smooth surface of the container makes it easy to clean and recycle. To sum up, the PLA coated paper soup container has many functions such as anti-leakage, heat preservation performance, hygiene and safety, environmental protection and degradability, and convenient use. These features make it a common packaging choice for soups and takeaway or delivery needs
PLA coated paper soup containers have the following features: Anti-leakage: PLA coating can effectively stop the leakage of soup food, ensure that the food will not leak out in the container, and maintain the integrity of the package. Heat preservation performance: PLA coating has a certain heat preservation effect, which can help maintain the temperature of soup food, keep it hot for a period of time, and increase the taste and deliciousness of the food. Hygiene and safety: PLA materials are non-toxic and harmless, and will not release harmful substances when in contact with food, ensuring the safety and health of food. Environmentally friendly and degradable: PLA is a biodegradable material made of renewable plant resources, which is more environmentally friendly than traditional plastic materials. Using PLA-coated paper soup containers can reduce dependence on non-renewable resources and reduce the burden on the environment. Convenient to use: PLA-coated paper soup containers are usually lightweight and easy to carry, which is convenient for consumers to take away or take away. The smooth surface of the container makes it easy to clean and recycle. To sum up, the PLA coated paper soup container has many functions such as anti-leakage, heat preservation performance, hygiene and safety, environmental protection and degradability, and convenient use. These features make it a common packaging choice for soups and takeaway or delivery needs
Characteristics Standard NFC 17-102/2011 Efficiency T 60 µs Lightning current withstand test (10/350 s) Iimp 100kA Max. current withstanding test Imax 200kA Effective Working Temperature Range tmin / tmax -25 C / 90 C Electrical Enclosure IP IP65 Central Rod Section sqm 315mm2 Standard deviation �?PDA < 0.57 �?PTS Product Specifications Warranty Lifetime On-site testing capabilities Proprietary tester Maintenance & Service Flex detachable modules Width �?120mm Height 445mm Net Weigth 1,8kg Material Stainless Steel / Aluminum Feasibility for protection levels I - II - III - IV ION Generator Unit Double Sustainability 100% Recyclable Pole Fixing Diameter (M) �?60mm Packing Informations Width �?135mm Length 480mm Gross Weigth 2,05kg Protection Radius (Rp) Height 2m 3m 4m 5m 10m Level -I- 30 45 61 77 81 Level -II- 32 49 65 84 87 Level -III- 37 56 76 95 98 Level -IV- 41 63 82 105 106
Rotary tilting refining furnace The rotary tilting refining furnace is mainly used for the pyrometallurgical refining of recycled metals (mostly used for impure copper). In order to improve the technical and economic comprehensive indicators of the tilting refining furnace, it is best to have a copper grade higher than 90% when entering the furnace. For raw materials with lower copper grades, it is best to first undergo pre-treatment in the blast furnace and blowing furnace before entering the tilting furnace. The furnace body of the rotary furnace is installed on a rotating frame, which, under the action of a hydraulic cylinder, can tilt the furnace body within a certain angle range to achieve process actions such as feeding, melting, and dumping slag. At the same time, the furnace body can rotate around its axis under the action of the transmission mechanism; The rotary motion improves the heating efficiency of the furnace and is of great significance for the overheating of the molten metal. When melting metal in this furnace, a certain amount of slag forming agent needs to be added. The molten slag forming agent and slag liquid have a protective effect on solid and liquid metals, which can prevent metal oxidation The burning loss rate of elements such as silicon and manganese in a rotary cupola is equivalent to that of a coke burning cupola. The content of carbon elements in the rotary furnace is decreasing, so it is necessary to add a certain amount of carburizing agent ( graphite) to the furnace material.
Tablecloth Wrapping Fabric, Non Woven Fabrics Tablecloth, Flower Wrapping Fabric Supplier REASONS TO CHOOSE TABLECLOTH & FLOWER WRAPPING FABRIC: Product: Flower Wrapping Fabric Material: 100% Polypropylene Technics : Spun bonded Weight 60gsm to 80gsm or customized PRODUCT SPECIFICATIONS: Product: Flower Wrapping Fabric Material: 100% Polypropylene Technics : Spun bonded Weight 60gsm to 80gsm or customized Size: 80cm x 20m, 80cm x 50m, or customized Colors: white/black/green/red/yellow/pink, or customized MOQ: 2000kg/color Packaging: 2cm, 4cm, 2" or 3" paper tube inside and poly bag outside Characteristics: Eco-friendly, recyclable, breathable, good strength and elongation Qingdao Yihe is one of the leading 100% Breathable Mattress Cover Wholesaler. Our PP Spunbonded Nonwoven Fabrics has high quality and competitive price. We also produce Spring Pocket Non Woven Fabric, if you want to know more about non-woven fabrics
Product overview New efficient environmental protection fungicide is the new patented product developed and researched by our company. The product mainly plays a role in absorbing the negatively charged bacteria by cation through electrostatic force, hydrogen bonding force, hydrophobic combination between surfactant molecules and protein molecules to focus them on the cell wall, further generating chamber resistance effect and causing bacteria death due to inhibition of growth; In the meanwhile, the hydrophobic alkyl can also react to the hydrophilic group of bacteria to change the permeability of membrane, then generates the lysis, destroys the cellular structure and causes the dissolution and death of cells. Such kind of fungicide is efficient, non-toxic, isn't influenced by the change of ph value, convenient in use, strong in stripping slime layer, stable in chemical performance, favorable in dispersion and corrosion inhibition, etc. It can be widely applied in the paper pulp and paper making coating in papermaking industry; For the coating of internal and external wall, sewage treatment, industrial recycling cooling water system, textile industry, etc., it can be directly added to the coating process, or be added to the water slurry system in the paper making process to effectively control the fungus reproduction, paper pulp mildew, etc. Technical specifications Appearance: Colorless to yellowish transparent liquid Proportion: 1.02±0.05 �· pH value: 6-8 �· Solubility: Mutually soluble with water at any proportion Performance characteristics 1. It is efficient, has low toxicity and broad spectrum, and can match with any papermaking chemicals to quickly sterilize for a long time; 2. It is green and environment-friendly, and its decomposer doesn't generate any pollution to environment; 3. It doesn't generate stimulation damage to skin and eyes and doesn't erode equipment. 4. It is widely applicable to the sterilization and algae killing of recycling water, sewage, reinjection water, seawater, etc. Usage tips CRM-8909 fungicide is non-oxidizing efficient fungicide, with general dosing quantity of 100-200g/ ton bone dry pulp, and its usage amount as slime stripping agent reaches 50-150g/l Packing and storage The product is packaged with plastic bucket, and the net weight of every bucket can be 25kg, 50kg and 200kg, and is confirmed according to the requirements of customers. This product shall be stored in a shaded, cool and dry condition at room temperature, Shelf life: 6 months. This product is not dangerous.
Light pink himalayan rock salt himalayan salt edible salt rock salt organic salt pure salt fine salt coarse salt mineral rich salt 100% natural salt salt crystals himalayan mineral salt himalayan pink crystals table salt cooking salthimalayan pink salt pink rock salt premium pink salt natural mineral salt pink salt crystals pure himalayan crystal salt edible pink salt organic pink salt himalayan salt exporter fine grade pink salt coarse himalayan salt himalayan cooking salt pink salt for international markets bulk pink salt supplier high quality himalayan salt pink salt granulespure pink salt himalayan table salt cooking grade pink salt pink mineral salt bulk pink salt supplier natural himalayan salt pink salt export fine grain pink salt organic himalayan salt himalayan rock salt edible himalayan salt premium pink salt pink salt for cooking kitchen pink salt himalayan salt granules.
Aviation kerosene like jet fuel a 1, jet fuel ts 1, d2/en590 like diesel 10 ppm (gasoil 0.001%s), diesel 50 ppm (gasoil 0.005%s), diesel 500 ppm (gasoil 0.05%s), diesel 1000 ppm (gasoil 0.1%s), diesel 2500 ppm (gasoil 0.25%s), petrol like unleaded gasoline ron 92, unleaded gasoline ron 95, unleaded gasoline ron 97, d6 residual fuel like fuel oil 3.5% 180 cst, fuel oil 3.5% 380 cst, bitumen, base oil, white spirit, recycle base oil, bio diesel, fuel oil, lng & lpg, diesel, pet coke, petrol, crude oil, fmcg like raw metal like steel rebar, billets & slabs, aluminum ingots, copper cathode & electrodes, low carbon ferrochrome, ferrosilicon 72% and 75%, lead, zinc, casing, tubing, drill pipes, line pipes, valves package, industrial scrap & surplus like steel, copper.
Automobile spare parts, genuine spare parts for cars and trucks: spark plugs, engine oils, lubricants, seal and gasket kits, timing belts, fuel injectors, suspension bushings, shock absorbers, brake pads, headlamps, fuel and water pumps, air and oil filters, engine and gearbox mounts, tensioner assemblies, crankshaft and wheel bearings, stabilizer links, thermostats, ignition coils, oxygen sensors, radiator grilles, windshields, hydraulic fluid, engine repair kits, control units..
Sulphur with a chemical formula of S and melting point of 112-120 C, also called Brimstone, meaning Burning Stone" is an organosulfur compounds and a chemical element. Sulphur or sulfur occurs near volcanic regions or hot springs and geothermal areas. It is a nonmetal, combined of gypsum, pyrite and galena and is present in huge quantities in the earths crust and has a yellow color and distinct odor. From thousands of year it is known to humans and been used in several industries and has various applications. Being insoluble in water and poor conductor of heat and electricity though dissolves in many organic solvents. Sulphur vigorously goes under various chemical reactions, being highly reactive. It easily forms Sulphur oxides as it readily combines with any element, as oxygen. It has become an essential element in life and is used in many industries such as Fertilizers, Chemical Industry, Rubber Industry, Pharmaceuticals, Pesticides and Insecticides, Plastic and Glass industry, Foundry and Cement industry, etc. it is so versatile. Its been one of the core chemical element to function biochemical and macronutrient of living organisms. Its greatest commercial use in production of Sulphur Acid. Therefore, Sulphur has a very deep significance on the nature and humans, it even can adversely harm environment, if Sulphur containing fuels are burnt, as Sulphur dioxide is released, causing air pollution. Jyoti Chemical is fully dedicated to provide whole sum satisfaction to our customers therefore, our selected Sulphur is of fine quality and at very reasonable rates, available in both of its form i.e. Powder and Granules.
Unsweetened Desiccated Coconut. PHYSICAL CHARACTERISTICS: Appereaance and Color : White, free from yellow specs or other discolorations. Flavour/Odour : Mild and sweet characteristic of coconut, free foreign flavours and odours. Size : Fine granular of coconut. Impurities : Not more than 4 dark specs per 100 grams. Granulation mesh 7 : 0% mesh 14 : 5 - 23 %. mesh 18 : 30 - 55 %. pan : 33 - 65 %. CHEMICAL CHARACTERISTICS: MOISTURE : 3.0 % maximum TOTAL FAT : 50 + 5 % (d.w.b) FREE FATTY ACID : 0.10 % maximum (as lauric acid) pH (10% dispersion) : Min 6.0 HEAVY METAL: Pb : 0.1 mg/kg maximum Cd : 0.1 mg/kg maximum Hg : 0.03 mg/kg maximum As : 0.1 mg/kg maximum MICROBIOLOGICAL: Standard Plate Count : 5.000 cfu/gram maximum. Yeast : 50 cfu/gram maximum. Mould : 50 cfu/gram maximum. Caliform : 100 MPN/gram maximum. E. Coli (Type 1) : Negative/1 gram. Salmonella : Negative/25 gram. Staphylococcus aureus : 10 cfu/gram maximum. PACKAGING: Standard Packing 25 Kgs nett weight in multiwall kraft paper bag with inner polyliner, weight 24,88 - 25,13 Kg. Each delivery identified by marking the grade of DC, Lot Number, Production Code, Self Life, Handling, and Supplier.
The Pneumatic Seeders or Fertilizer Machine from YongXiang make you have the possibility to customize your professional agriculture implement according to your needs. Multiple selection of hopper sizes, seeding shafts and seeding rows allow us to offer you a customized solution for every need and budget, and to save seeds, fertilizer volume and labor cost. The precise spreading of seeds, fertilizer and micro granules(1 to10mm) helps you obtain excellent yield. The 8 rows Pneumatic Seeders & Fertilizer machine spread material efficiently and in an environmentally friendly manner. The professional air seeders can be used in small and medium farms with different hopper size and seeding rows optional. Using excellent intelligent central system with radar sensor to precise control the seeding volume and the electrically regulated metering roller, the seed enters the air channel where the electric fan conveys it through plastic hoses to the dispersion plates, from there it is evenly distributed near the ground. This enables precise seeding or fertilizing even when the wind is blowing. Advantages: Most seed types(rice, wheat, rapeseed, soybean sorghum.etc) can be released in broadcast and drill sowing. Precise metering and exact lateral distribution across the entire working width. Mounting options on most implements, such as seed drills, single grain machines, agriculture maintenance implements, soil tillage implements. Easy adjustment & comfortable calibration test with Smart tablet APP.
Premium Grade Calcium Chloride (CaCl2) Product Overview: Our Premium Grade Calcium Chloride is a highly versatile chemical compound known for its exceptional de-icing and moisture control properties. Manufactured under stringent ISO9001 standards, this product ensures consistent quality and performance. Specifications: Formula: CaCl2 Purity: Available in 74-95% concentration Appearance: White, odorless granules or flakes Grade: Industrial and Food Grade Packaging: 25kg bags, 1000kg bags (customizable upon request) Features: High Melting Power: Effective for de-icing roads, driveways, and sidewalks, ensuring rapid melting of ice even in severe weather conditions. Moisture Control: Ideal for use in drying operations in various industries, including oil drilling, gas production, and food processing. Dust Control: Helps to bind dust particles on unpaved roads and construction sites, improving air quality and visibility. Safe for Environment: Our calcium chloride is designed to be eco-friendly and safe for use around vegetation and animals when used as directed. Applications: De-Icing Agent: Widely used in winter road maintenance to prevent ice formation and to melt existing snow and ice. Humidity Control: Used in storage facilities to maintain optimal humidity levels, especially in the agriculture and food sectors. Oil & Gas Industries: Acts as a fluid for hydraulic fracturing in the oil and gas industry and helps in the stabilization of boreholes. Construction: Serves as a solidifying agent in soil stabilization and as a concrete accelerator in building projects. Quality Assurance: Every batch of our calcium chloride undergoes rigorous testing to meet the highest quality standards. Accompanied by certificates of analysis (COA), our products ensure compliance with both national and international standards. Custom Solutions: We understand the diverse needs of our customers and offer customized formulations and packaging to meet your specific requirements. Order and Shipping: Minimum Order Quantity: 18 ton Shipping: FOB China, CIF to desired ports in the United States and Canada Lead Time: 3-4 weeks after order confirmation For detailed information and to place your order, please contact us
Starting a ruminant feed pellet plant has been a profitable business endeavor in many countries. The ruminant feed pellet machine line is mechanical equipment that specializes in making ruminant feed. For example, it can produce cattle feed, dairy cow feed, beef cattle feed, sheep feed, goat feed, camel feed, alpaca feed, and so on. How to make ruminant feed? You need Ruminant feed pellet machine line equipment. Herm machinery computer controls the ruminant feed pellet machine line with an output range of 1 ton/hour to 100 ton/hour, Complete ruminant feed pellet machine line includes raw material storage, cleaning machine, crushing machine, feed mixing machine, ruminant feed pellet maker, cooling machine, screening machine, packaging systems, transportation, and electronic control system. The complete ruminant feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of ruminants at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows ruminants to better utilize the nutrients in these ingredients. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the ruminant feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. Another, we provide free installation, training, factory design, and timely after-sales service.
Starting an animal feed milling machine has been a profitable business endeavor in many countries. The animal feed production line is mechanical equipment that specializes in making animal feed. For example, it can produce chicken feed, cattle feed, sheep feed, pig feed, horse feed, cat food, dog food, fish feed, shrimp feed, and so on. How to make animal feed? You need animal feed production line equipment. Herm machinery computer control animal feed pellet plant production line with an output range of 1ton/hour to 100ton/hour, Complete animal feed production line includes raw material storage, cleaning machine, crushing machine, feed mixing machine, animal feed pellet machine, cooling machine, screening machine, packaging systems, transportation, and electronic control system. The complete animal feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of animals at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows animals to better utilize the nutrients in these ingredients. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. Another, we provide free installation, training, factory design, and timely after-sales service.
This 5-7t/h feed production line is suitable for processing various animal feeds, such as poultry feed, livestock feed, chicken feed, cattle feed, sheep feed, pig feed, horse feed, duck feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 5-7 T/H animal feed pellet production line includes a hammer mill machine, 5-7 t/h feed pellet machine, double-paddle feed mixer, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, packing machine, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal feed pellet production line has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
