LUBENZ ROXX SPECIAL GEARLUBE of lubricants are supreme performance industrial gear oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in all types of enclosed gear drives with circulation or splash lubrication systems, where outstanding extreme pressure characteristics (EP/AW properties), extremely high load carrying capability and excellent demulsifying properties are desired. Moreover they offer extremely high protection against micropitting, wear and corrosion in enclosed gears and all types of oil lubricated bearings. Suitable for use in large & small spur bevel, spiral, helical & herringbone gears. for more information, please contact us.
Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance Technical Specs: Model HL-4000A(N) Pressure capacity 4Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC220V� � � 50/60HZ Power 1.25kw Operating model single pedal switch Dimension 310*270*710mm Weight  75KG
The submersible pump [1] is a positive pressure conveying vertical pump that can effectively solve the problems of air lock and cavitation. The explosion-proof level of conveyed materials determines that submersible pump products have different structures, working principles, classifications, scopes of application, product advantages and disadvantages, and operating methods. They can be simply divided into traditional submersible pumps (explosion-proof zone 1 outside the tank, zone 0 inside the tank There are two categories: non-explosion-proof) and new submersible pumps (explosion-proof in zone 1 outside the tank and zone 0 inside the tank).
This hydraulic rail bending machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems Model FMG-2.2 Working Pressure 47 MPa Max. bending force 900 kN working stroke 120 mm Pivot point distance 1200mm Machine size 1435x696x 385 mm Weight 80kg
Specifications: Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance  Technical Specs: Model HL-3000 Pressure capacity 3Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC110C/220V� � � 50/60HZ Power 0.75kw 1.25kw Operating model single pedal switch Dimension 260*300*650mm Weight  45kg 0KG
Science also plays an important role in the design of staff chairs. Designers will use various data and models to test the comfort and safety of the chair. For example, the structure of the chair is optimized by simulating the sitting postures of people of different weights and heights; the pressure distribution map is used to analyze the supporting effect of the seat cushion; the sliding and stability of the chair on different ground materials are even considered. These millimeter-accurate calculations and experiments ensure that the staff chair can perform well under various conditions. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
Specifications of REBOUND 120 HD plasma generator CNC plasma cutting machine: 1. 120 HD plasma generator This CNC plasma cutting machine matches 120/200/300/400HD plasma generator. (1) 100% (40â??) rated duty cycle, suitable for work in heavy industry; (2) Adopt gas pressure sensor, the cutting torch can be properly protected when the gas pressure is too low; (3) Adopt liquid flow sensor, the cutting torch can be properly protected when the liquid flow is too low, and the liquid flow is displayed on the display meter; (4) The gas pre-flow time, gas post-flow time, current up-slope time can be separately set according to the torch cable length; (5) The plasma gas pressure can be adjusted on the panel, the pressure is displayed on the meter, friendly operation; (6) There is digital communication connector, can be connected with different automation equipment; (7) With torch monitoring function, warning to change the consumables, to longer the torch working life; (8) Intelligent fan is used to reduce the dust; (9) With automatic protection of over-heating and lack-voltage. 2. Plasma control system (1) This system is applicable for kinds of flame/plasma cutting machine CNC system, widely used in desktop CNC cutting machine of metal processing, advertisement, stone material industry, etc. (2) The system is designed with high reliability, with plasma interference, lightning protection and surge capacity. (3) Practical flame/plasma cutting process, plasma processing, automatic corner speed control, and control the block. (4) We can use wireless remote control or wired control box to realize remote operation. Back, passage and breakpoints in recovery, to choose the function such as perforation position, greatly convenient user manipulation. (5) It Includes 24 kinds of graphics component library (customizable), contains the common basic processing parts. (6) It works with STARCAM nesting software well, and at the same time compatible IBE (Germany), FASTCAM in major nesting software. (7) Interface conversion, in both English and Chinese language. Also can be customized to other countries. 3. Plasma torch.� REBOUND fine cutting torch Strong perforation ability, good cutting perpendicularity, smooth cut surface. For cutting processes with different currents and metal materials, consumables with good cutting quality are matched.
Coffee Chips is a biomass fuel that comes from filtering coffee grounds and tree bark. Chips are a type of solid fuel made from biomass waste with a smaller size compared to the size of briquettes. The process used is pressing with high temperature and pressure, so it is effective. Product quality: Humidity: 16.4 % (ar) Ash content: 3.8 % (adb) Volatiles: 75.9 (adb) Fixed Carbon: 15.5 % (adb) Sulfur : 0.15 % (adb) Gross Calorific Value : 5,155 Kcal/kg (adb) , 4,527 Kcal/kg (ar) Dimension : 30 MM x 40 MM x 1 MM.
is a fuel derived from coffee filtration grounds and bark. Biopellets are a type of solid fuel based on biomass waste with a size smaller than the size of briquettes. The process used is a press with high temperature and pressure, so that it is effective Product quality: Humidity: 16.4 % (ar) Ash content: 3.8 % (adb) Volatiles: 75.9 (adb) Fixed Carbon: 15.5 % (adb) Sulfur: 0.15 % ( adb) Gross Calorific Value: 5,155 Kcal/kg (adb), 4,527 Kcal/kg (ar). Product dimensions: Diameter: 6-8 MM, Length 10-15 MM
Dorjee Wellness Wood pressed Groundnut oil obtained by mechanical pressure of wood, no heat generated. Naturally extracted from a cold pressed process which give the most purest form of oil. Wood pressed Groundnut oil helps to lowers Level of bad Cholesterol. Ground nut oil / Peanut oil have more benefits for diabetes. Wood pressed Ground nut oil increase the level of insulin then it helps to maintaining the blood sugar Level. Ground nut oil contains Fatty acids, it helps to restore the Damaged hair.
Moisture: 13,5% max Admixture: 1% max Length: 25 - 45cm (80% min) No fungus, reddish colour Packing: cartons (net10kg) Container capacity: 6,5 MT/20FT; 15 MT/40HQ Origin: Viet Nam Health Benefits of cassia: In Eastern Medical, cassia is used to treat a variety of maladies, including blurred vision, bloodshot eyes, constipation, high blood pressure, diabetes, stomach and muscle spasms, diarrhea, erectile dysfunction, flatulence, kidney disorders, nausea and vomiting, cramps, bed wetting, menstrual problems, cancer, to incite abortion, depression and many more
The compression springs are an open coiled type, used where a load or force is required when compressed, or to store energy in the compressed position. A compression spring offers resistance to compressive forces. The rings are wound around, and both ends can be open or closed or flattened or flatten due to the pressure. The shape of the waist and even the various tails can be deformed by design. It is one of the most widely used of all kinds of springs. Typical applications for compression springs include: Aerospace Valve Spray Off-road equipment Automotive Switches Fluid/air control
Graphite Electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, Widely used in LF, EAF for steel making industry, Non-ferrous industry, silicon and phosphorus industry.so it is the best conductive material for electric arc furnace and smelting furnace.
- Production: Wood chips are pressed under high pressure and high temperature with the participation of adhesives - Types of chipboard are distinguished by color indicators. For example: Normally blue - moisture-proof chipboard, red - fireproof chipboard. - To enhance the fire resistance of boards: plaster and cement are sometimes used as adhesives. Common thickness: 9, 11, 12,15, 16, 17, 18, 25mm Common size: Regular size 4*8 / Large size 6*8 Apply: table tops/office partitions/ceilings/flooring for temporary works/making packaging boxes, TV covers, speaker boxes, etc.
- A material produced from many layers of natural wood sliced about 1mm thin. Arranged perpendicularly in the direction of the wood grain and then pressed under high temperature and high pressure with the participation of adhesives. - Every layers of a plywood are always ood number (3,5,7,..) - Plywood has the ability to hold screws and adhere well; Good moisture resistance in ventilated environments. Common thickness of Plywood boards: 3, 4, 5, ,6, 8, 12, 15, 18, 20, 25mm Common size: Regular size 4*8 Apply: floors, walls / apply in interior and exterior / high humidity areas such as kitchens, bathrooms
DTech Products offers PTFE / PFA / PVDF / FEP lined double window sight glass/sight flow indicator. All products are fully lined with either PTFE, FEP, PFA depending on application. MS / SS 304 / SS 316 is also available. Both the glasses are bolted with the body. Fluids can be viewed from either top or bottom side. Our sight glass has Pressure resistance, Sturdy built, corrosion resistance, Durable. We do manufacturing, exporting and Supplying PFA / PVDF / FEP Lined Double Window Type Sight Glass in various grade of Teflon lining to suit temperature application in Flanged End Connection.
The thick sponge filling provides excellent support to those who sit in the chair. This kind of filling can absorb the weight of the body well, reduce the pressure on the body from sitting, and you will not feel uncomfortable even if you sit for a long time. The wide seat cushion ensures your body's comfort when sitting, allowing you to fully relax whether you are reading, working or resting. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
The thick sponge filling provides excellent support to those who sit in the chair. This kind of filling can absorb the weight of the body well, reduce the pressure on the body from sitting, and you will not feel uncomfortable even if you sit for a long time. The wide seat cushion ensures your body's comfort when sitting, allowing you to fully relax whether you are reading, working or resting. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
Purpose: warping yarn on a crosna Model: KDW-T36 Product number: W-6027 Year of manufacture: November 1985 Width of the shafts: 1600mm Working width: 1500mm Crosna diameter: 670mm Number of bobbins on the gatter: 2 x 304 = 608 Count of threads: 608 Distances between the spindles of the gatter: horizontal size 250mm, vertical size 230mm Power consumption: 10kW, main motor â?? DC 7.5kW Gauges of the warping machine: length: 3.50m, width: 2.70m. Gauges of the gatte, when opened: length 11.50m, width 5.20m, height 2.3m. It is powered by electricity and air with a pressure of 5 Bar. The machine has documentation - incomplete. No spare parts.
Purpose: warping yarn on a crosna Model: KDW-T5 Product number: W-5005 Year of manufacture: August 1975 Width of the shafts: 1600mm Working width: 1500mm Crosna diameter: 670mm Number of bobbins on the gatter: 2 x 304 = 608 Count of threads: 608 Distances between the spindles of the gatter: horizontal size 250mm, vertical size 230mm Power consumption: 10kW, main motor â?? DC 7.5kW Gauges of the warping machine: length: 3.50m, width: 2.70m. Gauges of the gatte, when opened: length 11.50m, width 5.20m, height 2.3m It is powered by electricity and air with a pressure of 5 Bar. The machine has documentation - incomplete. No spare parts.