Wet Brake Transmission Oil Utto Suppliers and Manufacturers

Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

Product advantages: ï?¬All-in-one design, high integration and space saving installationï¼? ï?¬Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 yearsï¼? ï?¬Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics Built-in BMS management system with comprehensive protection and monitoring control functions 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed

Brake Fluid is an ethylene glycol base fluict miscible with all other conventional brake fluids of similar quality except for mineral and silicon based fluids. APPLICATION For use as hydraulic fluid for brake and clutch systems of all vehicles where DOT 3 and DOT 4 performance level is required. BENEFITS Very high safety factor due to very high boiling point. High resistance to moisture absorption. High protection against corrosion of metal components in the brake systems. Compatible with rubber seals and hoses. Suitable for use at both low and very high temperatures.

ATF is a transmission fluid, having a low co-efficient of friction to meet specific equipment manufacturers requirements.  It is formulated from high viscosity index base oils combined with viscosity index improvers, anti-oxidant, anti-wear agents, detergents, dispersants and other elements. APPLICATION High performance transmission oil for semi and fully automatic transmissions and power steering systems where a fluid of GM Dexronll D type is recommended. BENEFITS Protection against wear and corrosion. Excellent lubrication at all operating temperatures. Correct frictional properties. + Better foam resistant.

Transgear EP range of oils are extreme pressure multipurpose gear oils formulated from solvent refined high viscosity index base stocks and selected additives. APPLICATION Recommended for use in gearboxes and rear axles where extreme pressure properties are required particularly for hypoid and bevel gears BENEFITs The content of EP additives ensures a continuous lubricants film even�  on gears operating under the most severe conditions. The antifoam property minimizes the formation of air bubbles that could adversely affect the continuity of the lubricant film. The high viscosity index ensures that lubricated parts operate correctly over a wide range of temperatures.

Variety Spearmint Oil 60% At Aromas Oils we take pride in offering you the finest quality of Spearmint oil known for its 100 purity and therapeutic benefits Our steamdistilled oil pure and concentrated in nature brings excellent health skin and hair benefits As an established spearmint oil exporter Aromas Oils ensures topnotch quality for its global customers Botany Spearmint plants thrive in temperate regions with wet soil reaching a height of 100 cm Belonging to the Lamiaceae family this perennial rhizomatous plant features stems and foliage ranging from hairy to hairless The flowering top used for oil extraction through steam distillation boasts serrated margins on its leaves Brief History amp Historical Uses of Spearmint Essential Oil Derived from the flower buds and leaves through steam distillation Spearmint oil is a clear thin liquid with a fresh minty fruity aroma While originating from the Mediterranean region its historical use includes being an aphrodisiac for the Greeks Ancient civilizations used it in bathwater for its aromatic fragrance and medicinal benefits such as treating sexually transmitted diseases providing relief from the common cold respiratory problems nausea and voice clearing Spearmint Oil Benefits Exhibits therapeutic benefits such as carminative stimulant antispasmodic antiseptic and restorative Stimulates blood circulation clears nasal passages boosts immunity and cleanses amp refreshes the skin Supports digestive system functioning provides relief from hiccups and relaxes stomach muscles Useful in treating headaches asthma sinusitis bronchitis stress and fatigue Spearmint Essential Oil Uses Diluted in water and ingested to alleviate an upset stomach Diffused to energize and uplift the nervous system Applied to gums and teeth to remove bad breath Added as a flavor in beverages for a minty aroma Used as an aromatic ingredient in colognes antiperspirants and other personal care products Users worldwide procure oil from spearmint essential oil suppliers for DIY and industrial uses Spearmint Essential Oil Blends well with Eucalyptus Rosemary Lavender Jasmine Marjoram Geranium Basil and Peppermint Aromas Oils the Spearmint Essential Oil Wholesale supplier provides these oils in bulk for blending purposes Available Product Variants Spearmint Floral Water General Precautionary Measures Spearmint oil manufacturers recommend the following precautions Avoid using Spearmint oil with any homeopathic medicines Keep the oil away from the reach of children and pets Dilute the oil with a suitable carrier before applying it to the skin to prevent rashes and allergic reactions Storage Transfer oil content from metal containers received from Spearmint Essential Oil suppliers or wholesalers to dark glass containers to maintain quality and extend shelf life Locations Covered As a spearmint oil bulk supplier Aromas Oils delivers oil to any location worldwide Documents Available on Request As

HS Code 15122990 PRICE = US$ 1,100 CIF ORIGIN: SOUTH AFRICA MIN ORDER: 200 TONS Description: A virgin liquid oil derived from a specific variety of sunflowers grown in New Zealand, particularly high in monounsaturated fatty acids for nutritional products. The oil is virgin and pressed under a cold pressing process. Oil temperature is a maximum of >36 degrees C at the time of oil extraction Typical Analysis: Free Fatty Acids 0.2 0.4 Peroxide Value (meq/kg) 10 30 Colour Bright Gold Moisture (%) 0.10 max Flavour / Odour Typical, bland Stearic Acid (C18:0) (%) 3.0 6.0 Oleic Acid (C18:1) (%) 78.0 82.0 Linoleic Acid (C18:2) (%) 8.0 15.0 Linolenic Acid (18:3) (%) 0.0 0.2 All results at time of manufacture Composition: High Oleic Sunflower Oil (NZ) Origin: SOUTH AFRICA GM Status: This product is GE FREE and does not require Genetic Modification labelling Nutritional Data: Average Quantity Per 100g Energy 3696kJ Protein 0g Fat Total 99.9g Fat Saturated 6g Fat Monounsaturated 82g Fat Polyunsaturated 12g Fat Trans 0g Carbohydrate Total 0g Carbohydrate Sugars 0g Sodium 0mg Packaging: 20l Drum, 200l Barrel, 1,000L pod or Bulk, Flexi-container Storage: Clean, dry areas away from heat and odorous products Shelf Life: Dependant on packaging Bulk 12 months from date of manufacture under ideal storage conditions 1,000L 12 months from date of manufacture under ideal storage conditions

HS Code 12071000 PRICE = US$ 600 CIF ORIGIN: SOUTH AFRICA MIN ORDER: 200 TONS PACKAGE:1L, 3L, 5L, 10L, 20L Special palm oil Premium-grade palm oil with less than 3% free fatty acid (FFA) content, extracted from the mesocarp of palm fruits. In order to make high quality refined products, it is essential to have crude palm oil of a good quality. Special Palm Oil is used: for cooking and frying as nutritious supplement in soap and detergent Special Palm Oil Specifications: FFA (%) Max: 3.0 Moisture & Impurities (%) Max: 0.1 IV: 51-54 Colour (5 1/4\" Lovibond) R: 28-32 Colour (5 1/4\" Lovibond) Y: 16-22

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes

Virgin coconut oil (VCO) can be produced from fresh coconut meat, milk, or residue. Producing it from the fresh meat involves removing the shell and washing, then either wet-milling or drying the residue, and using a screw press to extract the oil. VCO can also be extracted from fresh meat by grating and drying it to a moisture content of 10–12%, then using a manual press to extract the oil. Producing it from coconut milk involves grating the coconut and mixing it with water, then squeezing out the oil. The milk can also be fermented for 36–48 hours, the oil removed, and the cream heated to remove any remaining oil. A third option involves using a centrifuge to separate the oil from the other liquids. Virgin coconut oil looks slightly different from ordinary coconut oil and this differentiation cannot be made with the naked eye. This difference is mainly due to the presence of certain colloidal and other particles and moisture within it. On the other hand, ordinary oil is refined and is mainly left with the fatty acids in it and almost nothing else. Ideally, virgin coconut oil should be as clear as water. However, its color may vary slightly depending upon its processing. Virgin coconut oil has a very good taste and smell, like that of fresh coconuts, since it is derived from fresh coconuts and is subjected to very low, if not totally nil, heat and sunlight. It is also not refined. This preserves all the natural goodness of this oil, including a high content of vitamin-E and minerals, which are otherwise almost completely robbed from ordinary coconut oil during processes like heating, filtration, refining, and bleaching, which are done to make it colorless and odorless. Furthermore, virgin coconut oil is very effective as a moisturizing agent. Its antioxidant properties are far better than those of normal coconut oil.

Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

KORYO RACER SJ 15W-40 High Performance 4 Stroke Motorcycle Engine Oil DESCRIPTION KORYO RACER SJ 15W-40 is multi grade highly refined mineral engine oil, formulated with an advanced additive package and developed for 4 stroke engines to provide good engine cleanliness, good wear and corrosion protection,it is suitable for Japanese high performance engines & recommended for motorcycle where API SJ/JASO MA2 performances are required PERFORMANCE API SJ/JASO MA2 PACKAGE 1L, 200L Plastic Can/Steel Barrel