solar water heater.
Evacuated Tube Specifications: 1. Length (nominal):1800mm 2. Outer tube diameter: 58mm 3. Inner tube diameter: 47mm 4. Glass thickness:1.8mm/2.0mm 5. Thermal expansion: 3.3x10-6 C 6. Material: Borosilicate Glass 3.3 7. Absorptive Coating: Graded Al-N/Al 8. Absorptance: >93% (AM1.5) 9. Emittance:
Solar water heater Carton
Solar heater for water of 179 liters - dct-470-47-150 usd $550.00 Brand diceno. Water container is suitable for 4 people. Outer tank is made of stainless steel; inner tank is made of aluminum with insulating polyurethane material. Measures of the tank are 1.80 meters of length x 46 cm of diameter. It contains 24 crystal tubes of 46 mm/1.50 meters. Fuse of entrance and exit is 1/2 " Weight of the equipment in operation is 574.20 pounds or (261 kg). Warranty is 5 years by manufacture defects.
High solar-thermal conversion and low heat loss Stable advanced coating up to 380 centigrade Long time warranty to 15 years High level vacuum ensure operation under cold weather Data sheet of solar water heater Material borosilicate glass 3.3 Structure all glass coaxial double-layer tubes Material of coating aln/ain-ss/cu Absorptance 0.94 to 0.96 Emittance 0.04 to 0.06 Vacuum les than 5f-10-4pa Stagnation temperature 270 to 300 centigrade Heat-loss coefficient less than 0.6w/ +o *fª) Bearing hailstone ability hailstone diameter ª¬25mm Pressure-endure ability 1mpa Carton packing standard
1) Inner tank:stainless steel SUS304-0.5mm 2) Vacuum tube:QB-AL-N/AL-47-1500/58-1800 3) Outer tank:painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS304 4) insulation:polyurethane 50mm/60mm 5) Frame:coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm 6) Reflector:aluminum component/stainless steel.
Free-energy high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology.High efficient vacuum tube absorbs heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 500l. It has the following features: 1. High pressure storage tangk ( testing pressure = 9bar ) 2. No vent and less heat loss as compared to low pressure model 3. Highly efficient heat pipe technology 4. No water introduced into vacuum tube 5. No sealing rubber is needed and hence no leaking problem 6. Easy plug-in installation 7. Freezing resistance Whole package We have solar keymark-en12976 certificate Whole package. 15 sets fit in a 20" container 30 sets fit in a 40" container
Materials: Inner tank materials: sus304-2b Inner tank thickness: 0.5mm Outer tank: the steel coated with zinc Outer tank thickness: 0.37mm Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame materials: steel coated with the zinc Frame thickness: 1.5mm Advantages: low cost hot water and good heat efficiency. Standard export package
Commodity Integrative Pressurized Solar Water Heater Vacuum Tube : 47mmX1500mm, 58mmX1800mm Amount of Vacuum Tube: 16 / 18 / 20 / 24 / 30 / 36 Material Inner tank: SUS304 stainless steel Outer tank: Galvanized steel alloy Bracket: Galvanized steel alloy Heat insulation layer: Imported polyurethane Heat pipe: straight copper pipe Thickness Inner tank: 1.2mm Outer tank:0.4mm Bracket::1.5mm Heat insulation layer: 50mm Working Temp 99 Celsius degree Working Press 1.0MPa (10 bars) Coloration as per Accessories Assistant tank and electrical heater Certificate ISO9001:2000, CE Warranty 5 years for full system / 15 years for vacuum tube MOQ negotiation Lead time within 15 days for full container at factory Payment Telegraphic Transfer (T/T), Letter of Credit (L/C)
Inner Tank Material: Stainless Steel Power Source: Solar Features: 1) Water tank capacity: 10L x X tube 2) Heat collector machine size: ª¦58 x 2.0m 3) New vacuum hot tube ª¦58 ó¬1800 mm 4) Inside water chest: imported BS SUS304-2B stainless steel (food class) 5) Outer water shell: A luster resembling plate (colors: white, argentine, gold) or stainless steel 6) Heat insulation layer: 60mm ammonia ester integral foaming, superior heat preservation 7) Grade A material: imported hot zinc steel plate 8) Glint plank angle of elevation: 45/50 9) Water tank diameter: 480mm 10) Falling water collection method.
Commodityregular solar water heater Materialinner tank: imported stainless steel (sus304/2b) Outer tank: galvanized steel alloy Bracket: 1.5mm Heat insulation layer: imported polyurethane (bayer, germany) Thicknessinner tank: 0.4mm Outer tank:0.4mm Bracket: 1.5mm Heat insulation layer: 50mm Working temp.99 celsius degree Working press.0.3mpa (3 bars ) Colorationas per Certificateiso9001:2000, ce Warranty5 years for full system / 15 years for vacuum tube Moq20'gp Lead timewithin 15 days for full container Payment telegraphic transfer (t/t), letter of credit (l/c) Carton
It is non-pressurized type solar water heater with water tank. It uses double-layer vacuum solar tube. This kind solar water heater is suitable for family in warm or hot areas. There is no water in its vacuum solar tubes, the water can be heated in its tubes, and then the hot water will be stockpiled in water tank. This non-pressurized solar water heater is very popular in asia, africa, torrid zone and warm area. 1) reliable and efficient with twin-glass solar tubes 2) easy plug-in installation 3) outer tank material: stainless steel plate or powder coated color steel sheet 4) inner tank material: 0.5mm thick sus304 food grade stainless steel plate 5) frame material: color steel 6) superior heat preservation ensured by 50 - 65mm polyurethane foam insulation layer All items are packed into cartons. For sample products, cartons are packed into plywood boxes. For containers, cartons are packed into container directly.
It is pressurized type solar water heater separated with water tank. It uses double-layer vacuum glass solar tube which has cooper heat pipe inside. This kind solar water heater is suitable both for families and projects in cold areas. It can be used in -25 celsius degrees. There is no water in its heat pipe tubes. This pressurized type solar water heater is very popular in europe and other cold areas. 1) high efficiency solar collector using heat pipe evacuated tubes 2) able to be used in all climates 3) reliable and efficient with twin-glass solar tubes 4) copper heat pipes for rapid heat transfer 5) easy plug-in installation for mounting on the roof or at ground level 6) maintenance free 7) suitable for mains pressure water (up to 8bar / 116psi) 8) corrosion resistant silver brazed copper header 9) frame material: aluminum alloy 10) casing material: aluminum alloy 11) excellent insulator in glass wool 12) collectors may be connected in series to increase water heating capacity 13) tubes easily replaced if broken - can be used with broken tubes 14) ideal for commercial solar water heating applications Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
It is a non-pressurized type solar water heater separated with water tank.. It uses double-layer glass evacuated solar tubes. It is high heat efficiency and economical system especially for projection. It is designed for commercial solar water heating application. This type soalr water heater is very popular in some hot or warm areas. 1). Designed for commercial solar water heating applications 2). Reliable, efficient, twin-glass solar tubes 3). Polyurethane insulation ensures good heating performance and minimal heat loss 4). Manifold cover's material: stainless steel or galvanized sheet 5). Frame material: 1.2mm thick all stainless steel 6). Easy plug-in installation 7). Can be connected in series to increase water heating capacity Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
This is a pressurized type tubular solar water heater (sfd type ) with copper coil. Sfd model has a special copper coil heat exchanger in the inner tank. The coil copper pipe can bear 8 bars pressure. The water in the tank is used as the heat transfer medium, rather than using it directly. The obvious advantages are with water supplier, which can supply cold water into the tank automatically; it can be connected with pressurized system. Sfd is suitable for torrid zone and warm areas. 1). Designed to accept mains pressure cold water 2). Copper coil heat exchanger can be used as part of a closed or open loop system, providing heating to a main hot water tank 3). Freezing is of minimal concern for sfd series 4). Reliable, efficient, twin-glass solar tubes 5). Superior heat preservation with 50 - 65mm polyurethane tank insulation 6). Outer tank material: stainless steel plate or powder coated color steel sheet 7). Inner tank material: A) 0.5mm thick sus304 food grade stainless steel plate B) high purity copper for the heat exchanger coil 8). Frame material: 1.2mm thick all stainless steel 9). Collectors may be connected in series to increase water heating capacity 10). Easy plug-in installation Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
Solar water heater system made of stainless steel 316l boiler of 300 liter, two 2.24sqm solar collector, support structure in galvanized steel, copper pipes, installation kit. Europallet
Evacuated Tube Specification Diameter Length 47 x 1500, 58 x 1800. Vacuum degree Pa 5 x 10 -3 . Absorptivity >0.93. Emissivity
Volume: 105~135L; 135~300L. Vacuum tube: 47*1500mm; 58*1800mm. Skin material: Fluorocarbon board with high quality. Inner tank material: Imported SUS304-2B food grade stainless steel. Insulating layer: polyurethane's cellular(thinkness:60-70mm). stent : Imported stainless circle steel. Specification: 15pipes\16pipes\18pipes\20pipes\24 pipes\30pipes\36pipes.
Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly. 150*50*50cm, 50kg
Collector:47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or slantly. Carbon size: 180*50*50cm for twenty-tube solar water heater.
