100G CWDM 10KM CFP4 Optical Transceiver ITEM NO.:ECP4XX10A-3LCD10 DATA RATE:100G WAVE LENGTH:CWDM DISTANCE:10KM CONNECTOR:LC FIRST:SM DDM:YES PRODUCT ORIGIN:China SHIPPING PORT:Shenzhen Package type: Individual package or 10pcs/package Features Compliant with 100GBASE-LR4 Support line rates from 103.125 Gbps to 111.81 Gbps Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Single 3.3 V power supply Case operating temperature range:0°C to 70°C Power dissipation < 6W Applications Local Area Network (LAN) Data Center Ethernet switches and router applications Standard Compliant to IEEE 802.3ba Compliant to CFP MSA CFP4 Hardware Specification Compliant to CFP MSA Management Interface Specification
100g qsfp28 zr4 Guanglianâ??s 100G QSFP28-ZR4 Optical Transceiver Module is designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 80km over single mode fiber (SMF) with duplex LC connectors. Taking EML TOSA+ SOA+PIN+ROSA+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. This transceiver is compliant with IEEE 802.3ba 100GBASE-ZR4 and OTU4 4I1-9D1F standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. It is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, access network, data center interconnection, and 5G wireless network. 100g qsfp28 zr4 Features BOX (EML TOSA+SOA+PIN ROSA) packaging technology Support both 103.1Gbps and 112Gbps aggregate bit rate 4 x 28G DFB-based LAN-WDM DML transmitter 4 x 28G electrical interface Up to reach 80km with FEC on SMF 3.3V power supply voltage Power dissipation â?¤6W Operating Case Temperature: 0~70â?? Duplex LC connector 100g qsfp28 zr4 Application 100GBASE-ZR4 Ethernet Access Network Telecom Network Data Center Interconnection(DCI)
200g qsfp56 Guanglians 200GBASE-SR4 optical transceiver module supports link lengths of up to 100m over multimode fiber (MMF) with MTP/MPO-16 connector. It is compliant to IEEE 802. 3bs and QSFP56 MSA standards. The 200 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and de-multiplexing of the eight wavelengths are managed within the device. It is suitable to be used in various applications, such as data centers, high-performance computing networks, proprietary Interconnections etc. 200g qsfp56 Product Features COB (Chip on Board) packaging technology Supports 200Gbps aggregate bit Low Power Dissipation, Max 4.0W Each End Up to 70m transmission with OM3 multi- mode fiber Up to 100m transmission with OM4 multi- mode fiber 850nm VCSEL/PIN photo detector Operating Case Temperature: 0~70 200g qsfp56 Application 200GBASE-SR4 Ethernet Data Center HPC Interconnects Proprietary Interconnections
Features: 4 cwdm lanes mux/demux design Up to 12.5gbps data rate per wavelength Qsfp msa compliant Ieee 802.3ba electrical interface Up to 2km transmission Optical link budget: 9.5db Operating case temperature: 0 to 70°c Maximum 3.5w operation power Smf lc duplex connector Rohs directive-compliant Applications: Data center interconnect 40g ethernet Infiniband qdr 40g campus link
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 1310nm Max Cable Distance 10km on 9/125um SMF Connector Duplex LC Transmitter Type DFB 1310nm Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun SFP28-25G-SR 850 nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over multi-mode fiber for link length of 100m. These transceiver designs are optimized for high performance and cost-effective to supply customers with the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gbps Wavelength 850nm Max Cable Distance 70m on OM3 or 100m on OM4 Connector Duplex LC Transmitter Type 850nm VCSEL Extinction Ratio 2dB Media MMF Power Consumption
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.2Gbps Wavelength 1310nm Max Cable Distance 10km at Single Mode Fiber Connector Single MPO Transmitter Type DFB Laser Array Extinction Ratio 3.5dB Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. Compatible Cisco Form Factor QSFP+ Max Data Rate 10.5Gbps Wavelength 850nm Max Cable Distance 150m on OM4 MMF Connector MTP/MPO Transmitter Type VCSEL 850nm Extinction Ratio 4dB Media MMF Power Consumption < 1.5W Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)
GLsun QSFP28-100G-LR4 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four electric-absorption modulated lasers (DMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Compatible Cisco Form Factor QSFP28 Max Data Rate 28Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type LAN WDM DML Extinction Ratio 4dB Media SMF Power Consumption
GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.
40g mm 100m qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 Distance: 100m Interface: mpo Fiber: mm Ddm: yes Place of origin: made in china Port:shenzhen Features High channel capacity: 40 gbps per module Up to 11.1gbps data rate per channel Maximum link length of 100m links on om3 multimode fiber or 150m links on om4 multimode fiber High reliability 850nm vcsel technology Electrically hot-pluggable Digital diagnostic sff-8436 compliant Case operating temperature range:0°c to 70°c Power dissipation < 1.5 w Standards Compliant to ieee 802.3ba Compliant to sff-8436 Rohs compliant. Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package
Features Up to 11.3Gb/s data links 1310nm DFB transmitter and PIN receiver with CDR supported 9.95 to 11.3Gb/s reference-free Up to 10km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC Applications 10GBASE-LR/LW & 10G Ethernet SDH STM64 Other Optical Links
100G QSFP28 LR4 10KM LC Optical Transceiver Product Model:EQxx10X-3LCD10 Data Rate:100G Wavelength:CWDM Distance:10km Connector:LC Fiber Type:SM DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Hot pluggable QSFP28 MSA form factor 2.Compliant to IEEE 802.3ba 100GBASE-LR4 3.Up to 10km reach for G.652 SMF 4.Single +3.3V power supply 5.Operating case temperature: 0~70 6.Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) 7.4x28G Electrical Serial Interface (CEI-28G-VSR) 8.Maximum power consumption 4.0W 9.Duplex LC receptacle Description This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data. The central wavelengths of the 4 LAN WDM channels are 1295.56, 1300.05, 1304.58 and 1309.14 nm as members of the LAN WDM wavelength grid defined in IEEE 802.3ba. The high performance cooled LAN WDM EA-DFB transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 10km links and compliant to optical interface with IEEE802.3ba Clause 88 100GBASE-LR4 requirements. Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
Models: Angle of LKD - 4 x12-3528-3030:62 x144 ° : matching LED Cree 2835 3030 size: 250 x 74 mm material: optical level PC and heat-resistant: - 40 ° ~ 120 ° standard: SGS/ROHS environmental protection authentication application: suitable for solar street lamps, communities and the new rural lighting, street lighting and other LED applications at a high speed.Product features: 1. The surface is in the shape of peanut meters, with good evenness and good light efficiency.2. Matched LED with uniform light spots, no astigmatism, no black spots, and very high transmittance without shadow, can maximize LED light utilization rate; 3. This product uses the high precision, aspheric optical design, original installation import optical PC raw materials, to ensure enough injection molding (reduce shrinkage products) we have good quality, and strict with product, all conform to the country and the export standards, the product uses the antistatic shockproof packaging.All products have passed SGS certification and meet ROHS environmental requirements.
SINY OPTIC-COM CO.,LTD. was founded in 2008, is ISO9001 and ISO14000 optical components manufacturer in China. SINY main products: Free Space Optical Isolator Polarization Dependent Isolator Polarization Independent Isolator Collimator Receptacle Receptacle With FA SINY's collimator Receptacle have two type: A-Lens Collimator Receptacle, C-Lens Collimator Receptacle. Please contact us for your special requirement.
10g xenpak transceiver Description: Poflink's xenpak is a standardized form factor for 10 gb/s fiber optic transponders that is used for data transfer rates from 10.3 gb/s to 10.5 gb/s. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. Xenpak transponders are used in datacom optical links only (not telecom). Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gb/s). Poflink offers the whole series of 10g xenpak, including: Xenpak 10gbase-sr 300m (mmf om3); Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km Features: Hot pluggable x2 msa form factor Low total power consumption Rohs-6 compliant (lead-free) Temperature range 0¡ãc to 70¡ãc Transmission distance 300m, 10km, 40km, 80 km Cooled 1550nm eml or uncooled directly modulated distributed feedback (dfb) Sc connector, single mode fiber Full duplex transmission mode Digital optics monitoring (dom) Power supply: +5.0 v, +3.3 v Xaui electrical interface 4 x 3.125 gb/s ethernet(ftlx1841e2) Management and control via mdio 2-wire bus De-latch mechanism with low extraction force Application: Xenpak 10gbase-sr 300m (smf om3); Xenpak 10gbase-lrm mmf 220m; Xenpak 10gbase-lr smf 10-20km; Xenpak 10gbase-er smf 40km; Xenpak 10gbase-zr smf 80km 1pcs/plastic box 0.2kg/pcs
PUMAI are very professional manufacture of fiber optics transceiver , the core components all is use American , Japan,Korea known brands product , we keep the consitant of High quality ,Fast production delivery process, Timely response , PISMAI is worthy of your first choice . 10G Dual fiber SFP+ optic transceiver 10G BIDI SFP+ optic transceiver 40G Dual fiber SFP+ optic transceiver 40G BD SR optic transceiver 100G LR ER ZR optic transceiver 10G 40G 100G AOC optic transceiver 10G 40G 100GDAC optic transceiver
DWDM Module can solve the shortage of fiber resources and transparent transmission of business, and reduce the cost of network Construction. With low-cost and compact dimension, it is mainly used in metropolitan area network and access layer, also be used to build networks.
