Electric pruning machine for green plants circular hedge pruning machine 1.2-2.5m spherical pruning machine for shrubs: 1. Lithium drive 2. Adjustable, clockwise, counter clockwise fast and slow trim. 3. The radian can be adjusted according to the size of the ball, and the round shrubs of different sizes can be trimmed 4. It is suitable for pruning round seedlings such as holly, boxwood and Photinia serrulata 5. It can rise and fall according to the height of the ball 6. High efficiency of ball trimming, standard round wood trimming
Lithium ore IN NATURA for lithium carbonate > Lithium hydroxide > Lithium spodumene The price for lithium carbonate and lithium hydroxide is index SMM minus 5%. Depending on the quantity per month in (MT) tons, the commission can be negotiated can be negotiated with the supplier, origin from Brazil The producer processes the extracted rock into sand for further processing. The quality then corresponds to 99.92 technical or 99.95 battery quality after further processing 99.95 battery quality. Lithium carbonate is supplied in these grades. Lithium hydroxide will reach 56%. Delivery as containerized goods Prices are CIF, require port of destination where the goods are to be delivered to - Buyer specifies quantities - Price renegotiation possible depending on quantity - need concrete information from the buyer about quantity - term of the supply contract, etc. - All questions will be answered by the manufacturer - Please submit your request or questions in writing - Link to the video of one of the manufacturer's stockpiles Offer on lithium (oxide + carbonate) IN NATURA: (the material is considered one of the best in the world!). It is not processed lithium carbonate... it is IN NATURA. 1) CONTENT: Li2CO3: 50-53% / Li2O: 2.0-2.5% / lithium silicate 46-48% (in this lithium silicate there are microparticles of spodumene and other microparticles). 2) GRANULOMETRY: 1.0-100mm (exactly as shown in the video). - QUANTITY: 50.000 - 55.000 MT PER MONTH (X12 MONTHS) - PRICE AND INCOTERM: ca. USD/TON CIF - Destination / Port? - TERMS OF PAYMENT: > Payment with LC: 30% upon order placement before loading, 70% in port before export > Payment with SBLC: also possible with TOP Bank positive credit report NATURA / raw product (ore) = the buyer processes it directly into the desired end product(s), e.g. lithium carbonate, lithium hydroxide, lithium spodumene For larger quantities of lithium ore, the buyer additionally filters out the microparticles of spodumene and other microparticles via his equipment and thus generates a greater profit through additional end products. Minimum purchase per month = 50 MT Info: the formula states that 1 ton yields 500 kg of end product plus rare earths Annual contract possible, price agreement possible directly with the owner / geologist for corresponding purchase quantities. Basic condition is NCNDA, LOI with quantity specification, desired term/delivery contract
Dimethyl Oxalate(CAS:553-90-2)
Sugar Esters E473, CAS No.37318-31-3 , commonly known as Sucrose esters of fatty acids, manufacturing process by esterifying sucrose with fatty acids. By varying the degree of esterification of the sucrose molecule it is possible to obtain emulsifiers with HLB values ranging from 1 up to 16. It is a light yellow powder, a non-ionic surfactant and is used as an emulsifier in dairy products, baked goods, soft drinks, jelly, cake and candy. Sucrose Fatty Acid Esters are a mixture of mono-, di-, and tri-esters of sucrose with fatty acids derived from edible vegetable or hydrogenated vegetable oils and fats. As an experienced Sugar Esters manufacturer and supplier, we has been supplying and exporting Sugar Esters for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sugar Esters powder Specification ITEM STANDARD RESULTS APPERANCE White crystal powder Conforms ACID VALUE (AS KOHMG/G) Not more than 6 3.0 ARSENIC (AS)MG/KG Not more than Less than 1.0 LEAD (PB) MG/KG Not more than Less than 2.0 CADMIUM MG/KG Not more than Less than1 MERCURY MG/KG Not more than Less than1 OTHER SOLVENT Isopropy 350ppm(incombination) Pass Ethyl acetate 126.7-128C Propylene glycol Pass Isobutyl alcohol 10ppm Pass Methy alcohol 10ppm Pass Methyl Ethyl Ketone 10ppm Pass DIMETHYL SULFOXIDE sulfoxide Not more than 2ppm Pass FREE SUGER(AS SUGER) % Not more that 5% 1.35 DIMETHYLFORMAMIDE Not more than 1ppm Pass WATERCONTENT% Not more than 4% 0.51 LOSS ON IGNITION % Not more that 4% 0.47 HLB VALUE 13
L-Tryptophan powder, CAS No.73-22-3, essential amino acid manufactured by fermentation from carbohydrate sources, free of materials of animal origin. Uses: L-Tryptophan uses in food, protein powder, skin care cosmetics, drinks as supplement. L-tryptophan is used as an active ingredient in antidepressant therapy. Other uses of L-tryptophan include weight loss and reduction of PMS. Function: plays a key role in balancing sleep and mood patterns. As an experienced L-Tryptophan manufacturer and supplier, we has been supplying and exporting L-Tryptophan for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Tryptophan Specification ITEMS STANDARDs Appearance White crystals or crystalline powder Assay 98% Min Specific Rotation -29.0~ -32.3 Loss on Drying 0.5% Max Heavy Metals 20mg/kg Max Arsenic(As2O3) 2mg/kg Max Residue on ignition 0.5% Max
L-Arginine powder, CAS No.74-79-3, non essential amino acid manufactured manufactured by fermentation from carbohydrate sources. L-Arginine is widely used in food, protein powder, skin care cosmetics. Use as Fragrance Ingredient; Hair Conditioning Agent; Skin-Conditioning Agent Miscellaneous; Antistatic, masking, skin conditioning. L-arginine also used as nutrition supplements by athletes to recover from fatigue. Arginine Function: can lower risk for arteriosclerosis and heart attack and repairing blood vessels. As an experienced L-Arginine manufacturer and supplier, we has been supplying and exporting L-Arginine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Arginine Specification Item Specifications (USP) Specifications (AJI) Description White crystals or crystalline powder White crystals or crystalline powder Identification Infrared absorption spectrum Infrared absorption spectrum Specific rotation[a]D20 +26.3 - +27.7 +26.9 - +27.9 State of solution/Transmittance 98.0% Chloride (Cl) 0.05% 0.020% Ammonium (NH4) 0.02% Sulfate (SO4) 0.03% 0.020% Iron (Fe) 0.003% 10PPm Heavy metals (Pb) 0.0015% 10PPm Arsenic (As2O3) 1PPm Other amino acids Chromatographically not detectable Loss on drying 0.5% 0.5% Residue on ignition(sulfated) 0.3% 0.10% Assay 98.5-101.5% 99.0-101.0% PH 10.5-12.0 Organic volatile impurities Meets the requirements
L-Arginine powder, CAS No.74-79-3, non essential amino acid manufactured manufactured by fermentation from carbohydrate sources. L-Arginine is widely used in food, protein powder, skin care cosmetics. Use as Fragrance Ingredient; Hair Conditioning Agent; Skin-Conditioning Agent Miscellaneous; Antistatic, masking, skin conditioning. L-arginine also used as nutrition supplements by athletes to recover from fatigue. Arginine Function: can lower risk for arteriosclerosis and heart attack and repairing blood vessels. As an experienced L-Arginine manufacturer and supplier, we has been supplying and exporting L-Arginine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Arginine Specification Item Specifications (USP) Specifications (AJI) Description White crystals or crystalline powder White crystals or crystalline powder Identification Infrared absorption spectrum Infrared absorption spectrum Specific rotation[a]D20 +26.3 - +27.7 +26.9 - +27.9 State of solution/Transmittance 98.0% Chloride (Cl) 0.05% 0.020% Ammonium (NH4) 0.02% Sulfate (SO4) 0.03% 0.020% Iron (Fe) 0.003% 10PPm Heavy metals (Pb) 0.0015% 10PPm Arsenic (As2O3) 1PPm Other amino acids Chromatographically not detectable Loss on drying 0.5% 0.5% Residue on ignition(sulfated) 0.3% 0.10% Assay 98.5-101.5% 99.0-101.0% PH 10.5-12.0 Organic volatile impurities Meets the requirements
L-Cystine powder, CAS No.56-89-3, formed by the oxidation of two cysteine molecules, a non-essential amino acid. It is used as a component for parenteral and enteral nutrition and the main active ingredient for medications used to treat dermatitis. Cystine along with the amino acid methionine are the amino-acids necessary for wound healing and forming of epithelial tissue. Cystine is known to stimulate the hematopoietic system and promote the formation of white and red blood cells. As an experienced L-Cystine manufacturer and supplier, we has been supplying and exporting L-Cystine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20 FCL 18000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 56-89-3 HS Code 293090 Specification Feed/Food Grade L-Cystine Specification Item STANDARD Specific rotatory power[±] D20 -215 -225 Clarity 98.0% Ammonium salt[NH4] 0.02% Chloride[CL] 0.02% Residue on ignition 0.10% Sulfate[SO4] 0.02% Iron salt[Fe] 10 ppm Heavy metal[Pb] 10 ppm Arsenic salt 1 ppm Other amino acid Color layer can not be checked out. Loss on drying 0.20% Content 98.5 -101.0%
Brightness 95% powder Refractive index 1.59 Oil absorption (ISO787/5) g/100g DOP absorption(ISO 787/5) g/100g PH Value (ISO 787/7) 9.0 Bulk density 1.4g/cm3 Hardness in Mohs 3 Moisture 0.2% Caco3 99.6% Ca O 56.06% Mg O 0.01% Fe2 O3 0.001% Al2 O3 0.001% Si O2 0.01% L.O.l 43.89
Lithium hydroxide CAS No. : 1310-65-2 Other Names : lithium hydrate MF : LiOH.H2O, LiOH EINECS No. : 215-183-4 Purity : 56.5% Appearance : White Powder Application : lubricating greases, batteries etc Color : White Sample : Available Apperance : Powder Mp : 462 C Density : 1.43 Water Solubility:Water Solubility: 113 g/L (20 C) lithium hydroxide Lithium hydroxide CAS 1310-65-2 Usage 1. It is mainly used as raw material for preparing lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries. 2. It is used to make lithium salt and lithium grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc
There are three crystal forms of �±, �² and �³. Type �± is a white monoclinic crystal, �² type is a hexagonal crystal, and �³ type is a cubic crystal. Hygroscopic. Lithium sulfate monohydrate crystallized from a concentrated aqueous solution is very stable. Purpose: 1. Used as raw material for special high-strength glass; 2. Used as analytical reagents and also used in the pharmaceutical industry; 3. Flavoring agent for producing food and synthetic beverages.
Epsilon-Poly-L-Lysine, also called Polylysine, CAS No.28211-04-3, is manufactured by fermentation process. It is widely used as food preservative. -Polylysine can inhibit the growth of Gram-positive and Gram-negative bacteria, yeasts, moulds, bacteria. Polylysine can be used in cooked rice, cakes, snacks, noodles, drinks, brewing, meat products, canned food, etc. As an experienced Epsilon-Poly-L-Lysine manufacturer and supplier, we has been supplying and exporting Epsilon-Poly-L-Lysine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Epsilon-Poly-L-Lysine powder Specification ITEM STANDARD Description Pale yellow powder �µ-Polylysine Purity 95% Loss on drying 10% Residue on ignition 1% Heavy metals 20ppm Arsenic 4ppm
L-Lysine Sulfate 65%/70%, CAS No.60343-69-3, a brown granule, feed grade. L-Lysine is a necessary building block for all protein in the body. As a nutrition supplements, L-Lysine Sulfate used in food production, beverage, pharmaceutical, agriculture/animal feed. L-Lysine Sulphate 65%, equal to 65% lysine HCl, could provide 51% free lysine in the feed. It has already been proven that L-Lysine Sulphate has almost the same feed effects L-Lysine HCl. As an experienced L-Lysine Sulfate manufacturer and supplier, we has been supplying and exporting L-Lysine Sulfate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Lysine Sulfate Specification ITEMS Specification Appearance Light brown granule Identity Corresponds Assay (L-lysine, On Dry Basis) 51% Assay (L-lysine HCl, On Dry Basis) 65% Sulfate Pass Test Loss On Drying 4% Residue On Ignition 4% Ammonium salt (as NH4) 1% Heavy Metals (as Pb) mg/kg 20 Arsenic mg/kg 3 PH ( 0.3g+50ml water 25C ) 3.0-5.0
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Product Name: Calcium Carbide Molecular Formula: CAC2 Cas No: 75-20-7 Class: 4.3 Un No: 1402 EINECS: 200-848-3 Size 80-120mm, 50-80mm, 25-50mm, 15-25mm, 7-15mm, 4-7mm, 1-4mm etc. (Could produce as buyerâ??s requirements)
Product Name: Calcium Carbide Molecular Formula: CAC2 Cas No: 75-20-7 Class: 4.3 Un No: 1402 EINECS: 200-848-3 Size 80-120mm, 50-80mm, 25-50mm, 15-25mm, 7-15mm, 4-7mm, 1-4mm etc. (Could produce as buyerâ??s requirements)
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
