Product Name: Isopropyl myristate Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE CAS: 110-27-0 MF: C17H34O2 MW: 270.45 EINECS: 203-751-4 Melting point ~3 �°C (lit.) Boiling point 193 �°C/20 mmHg (lit.) density 0.85 g/mL at 25 �°C (lit.) vapor pressure 230 �°F storage temp. 2-8�°C solubility
Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97
Isopropyl myristate is a moisturizer with polar characteristics used in cosmetics and topical medical preparations to ameliorate skin absorption. Isopropyl myristate has been largely studied and impulse as a skin penetration enhancer.
Isopropyl Alcohol CAS Number 67-63-0 Formula C3H8O Isopropyl alcohol is a secondary alcohol.it appears as volatile, colorless liquid with a sharp musty odor. Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform. SPECIFICATION Appearance Clear and Bright Platinum Cobalt Color 5 Pt/Co Water Content 0.037 % (m/m) Water Miscibility Pass Density at 20�°C 0.7851 g/cm3 Acidity (as Acetic Acid) 0.0005 % (m/m) Carbonyl Content (as CH3COCH3) 38.2 mg/kg Non-Volatile Matter < 0.001 %(m/m) Sulphur < 1 mg/Kg Purity 99.92 %(m/m) MAJOR USE: Rubbing-alcohol antiseptic, aftershave lotions, hand lotions, and other cosmetics. In industry it is used as an inexpensive solvent for cosmetics, shellacs, and gums, as well as for denaturing ethanol (ethyl alcohol). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Isopropyl Alcohol CAS Number 67-63-0 Formula C3H8O Isopropyl alcohol is a secondary alcohol.it appears as volatile, colorless liquid with a sharp musty odor. Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform. SPECIFICATION Appearance Clear and Bright Platinum Cobalt Color 5 Pt/Co Water Content 0.037 % (m/m) Water Miscibility Pass Density at 20C 0.7851 g/cm3 Acidity (as Acetic Acid) 0.0005 % (m/m) Carbonyl Content (as CH3COCH3) 38.2 mg/kg Non-Volatile Matter < 0.001 %(m/m) Sulphur < 1 mg/Kg Purity 99.92 %(m/m) MAJOR USE: Rubbing-alcohol antiseptic, aftershave lotions, hand lotions, and other cosmetics. In industry it is used as an inexpensive solvent for cosmetics, drugs, shellacs, and gums, as well as for denaturing ethanol (ethyl alcohol). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Isopropyl Myristate; Isopropyl tetradecanoate; propan-2-yl tetradecanoate Isopropyl Myristate produced by reacting myristic acid with isopropy alcohol. It is fully refined and deodorised. Application: Isopropyl Myristate is used in cosmetic formulations as a solvent, carrying agent, pigment wetting-agent, fragrance fixative and emollient. It is a common ingredient in lipsticks, lip moisturisers, skin moisturisers, body lotions, and other health and beauty products. Product's Specification will be provided upon inquiries request.
Refined Palm oil- CP10; spec:FFA(as palmitic)-0.1% Max; M&I-0.1% Max;IV-50-55;M.PtdegreesC(AOCS Cc3-5)-33-39; Colour(5.25 Lovibond Cell)3 or 6 Red Max Cathode copper 99.9% copper recovery
TYPICAL APPLICATIONS : Principle use is in the manufacture of emulsifiers, surfactants, soaps and chemical intermediates.
Neem oil derives from the fruits and seeds of the neem tree. These trees grow mainly in the Indian subcontinent. Neem oil is rich in fatty acids, such as palmitic, linoleic, and oleic acids, which help support healthy skin. The oil is, therefore, a popular ingredient in skin care products. The leaf of the plant also provides health benefits. The leaves contain plant compounds called flavonoids and polyphenols, which have antioxidant, anti-inflammatory, and antibacterial properties. Also, the Environmental Protection Agency (EPA) note that neem oil contains azadiracht in, a natural pesticide.
Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
Appearance Clear Normal. Smell & Taste Netural typical of Vegetable Oil. Free Fatty Acid Upto 0.10%, max. Moisture 0.05% to 0.10%, max. Impurities Negative. Peroxide Value (meq/kg.) 1.50, max. Iodine Value wijs 117 141. Fatty Acid Composition (%): C16:0 Palmitic acid 10,5. C18:0 Stearic acid 4. C18:1 Oleic acid 22. C18:2 Linoleic acid 54,5. C18:3 Linolenic acid 7,5. C20:0 Arachidic acid 0,5. C22:0 Behenic acid 0,5. Soya bean oil is high in polyunsaturated fat and low in saturated fat. The oil is cholesterol-free and rich in vitamin E, light in colour with a neutral taste.
Appearance Clear Normal. Smell & Taste Netural typical of Vegetable Oil. Free Fatty Acid Upto 0.10%, max. Moisture 0.05% to 0.10%, max. Impurities Negative. Peroxide Value (meq/kg.) 1.50, max. Iodine Value wijs 117 141. Fatty Acid Composition (%): C16:0 Palmitic acid 10,5. C18:0 Stearic acid 4. C18:1 Oleic acid 22. C18:2 Linoleic acid 54,5. C18:3 Linolenic acid 7,5. C20:0 Arachidic acid 0,5. C22:0 Behenic acid 0,5. Soya bean oil is high in polyunsaturated fat and low in saturated fat. The oil is cholesterol-free and rich in vitamin E, light in colour with a neutral taste.