Dowel Pins Screws|Mould Part Suppliers and Manufacturers

EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 5% solution - 6 to 8 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually add EcoTexTM-SL20 and mix for 2 min. 3. Add other ingredients and mix for 2 min. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�? �ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.

TECHNICAL DATASHEET EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 7% solution - 5 to 7 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in a cooker 2. Gradually add EcoTexTM-SL55 and min for 2 min. 3. Close the pressure cooker lid. 4. Open the steam value and cook to @ 120�? �ºC or 35psi. 5. Retain in the cooker for 15 to 20 minutes. 6. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 25Kg net weight PP bags with moisture-proof liner inside

Steel dowel pin Steel dowel CYL, taper and internal threaded dowel , and taper pinsand

Specializes in manufacturing high quality fasteners such as screws, nuts, bolts, foundation bolts, washers, allen keys, hose clamps, pins, and threaded rods. we utilize materials including stainless steel (201, 204, 301, 304), mild steel, brass, and aluminum.

We supply different engine parts of Locomotive Engines. Few of the parts are mentioned here- insert bearings set bush wrist pin bush HP Piston inlet valve discharge valve low pressure compression ring low pressure oil ring high pressure compression ring high pressure oil ring Nut self locking Blade retainer SS bolt Locking Key Bolt shroud Bolt OIL SEAL For price, specifications and more details please contact us

Ejector pin is the of the injection molding world. They apply a force to eject a part from the mold, and in some cases can leave marks. We are to design and position pins to minimize their effect on your parts. You can apply this product to release elasticity from bottom. And the features of the product are that it can adjust to required eject height in advance and it is easy to install. product information Material SKD61 Inner Hardness HRC43 HRC52 Surface Hardness HV1000 HRC52 Heat Treatment Nitrided Vacuumed

Automobile moulded parts Console, intake box, panel, air-condition system, side/door trim, front & rear bumper, etc. Our injection molding factory has several plastic injection molding machinery with mold locking force between 80t and 750t, can satisfy the requirement of mould trail, provide the service of batch production as customers' requests.

Hardness after hardening&tempering:hb240-280 Nitrided hardness:hv850-1000 Nitrided case depth:0.45-0.7mm Nitrided brittleness:less than grade1 Surface roughness:ra0.4 Screw straightness:0.015mm Application: pinned screw&barrel.

-high speed steel material guide ejector leader pin, giuded ejector shoulder leader pin, straight leader pin, -feature:4 time salt bath 1 time tempered Hardness: 58-60hrc Tolerance within 0.005mm -used for injection mould and casting mould . Din9861d, din1530d, din153oa, ah, jis, hasco, iso standard. Packing:bulk in cartons in pallet.

Backed by a team of dedicated and skilled professionals, we are able to provide a vast collection ofBrass Auto Parts as per client requirement. The offered range of screws is manufactured by our professionals in adherence with the industry laid standards & norms. These Brass auto parts are offered by us at very reasonable rates.These are available in many dimensions like sizes and shapes and are available in full customization.