1.Production introduction White fused corundum is made with an electric furnace from high-grade alumina powder as raw material. The resulting mineral has higher hardness and slightly lower toughness than brown fused aluminum oxide. Characterized by its high purity, strong grinding ability, abrasive tools made of it are suitable for grinding and polishing of cutting tools, precision-castings, spraying and coasting, medium body for chemical industry applications, special ceramics and high-grade refractory materials. Detailed specifications can be supplied on request. 4.Performance and advantages 1. Not affecting the color of the processing cases 2. Sandblasting in the non-iron process 3. Powder level ideal for wet blasting and light lapping 4. High speed process and quality 5. Containing a very low amount of iron oxide, suitable for non-ferrous blasting operations 6. After acid washing steps 25kg small bag, 40 bags in one big bag.
White fused aluminadescription White fused aluminum oxide is electrically fused in the furnace with high-grade alumina powder as raw materials. It has higher hardness and slightly lower toughness than brown fused aluminum oxide, characte-rized by its high purity, strong grinding ability. Abrasive tools made of it are suitable for grinding highspeed steel, high carton steel, etc. It also can used as materials for grinding and polishing precision-casting, spraying and coating, medium body for chemical industry, special ceramics and high-grade refractory materials, etc. Company introduction Our company was established in 1976, is a famous manufacturer of abrasive powder in china. Our company supply types of abrasive, including black silicon carbide, white fused aluminum oxide. The specification and f, p, jis standard graded powder is available on request. Otherwise, our company own¡¯s the laboratory. Our abrasive sell well in china and through-out the world. Product character Chemical analysis and grain size distribution Grit sizeF280F1000Ji 1). Chemical analysis (%) Na2o0.2max0.2max0.16max0.2max Fe2o30.07max0.07max0.06max0.07max Al2o399%min99%min99%min99%min Sio20.1max0.11max0.13max0.1max 2). Grain size distribution (um) Gb/t2481.2-1998&iso8486-2:1996&jis r6001-1987 Ds360.022.63524 Ds5039 White fused alumina standard Size Standard is r6001-1987. White fused aluminaapplication Sand blasting, coarse grinding, boned abrasive tools Polishing, lapping, wire sawing Refractory material White fused aluminapackage 1. 25kg bags + 1ton bag 2. 25kg bags + 1ton pallet 3. As customer's requirement 1.25kg bags +1 ton bag 2.25kg bags +1 ton pallet 3.As customer's requirement
Organic White Rice from Okayama, Japan. â??Pikamaru" has a lower content of amylose, a type of starch, than "Hinohikari" and other common Uruchi rice varieties, which makes the rice more sticky. Compared to Hinohikari, it has the same or better taste. It is also highly suitable for direct seeding and resistant to rice blast and stripe leaf blight
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 5% solution - 6 to 8 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually add EcoTexTM-SL20 and mix for 2 min. 3. Add other ingredients and mix for 2 min. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�? �ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
TECHNICAL DATASHEET EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 7% solution - 5 to 7 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in a cooker 2. Gradually add EcoTexTM-SL55 and min for 2 min. 3. Close the pressure cooker lid. 4. Open the steam value and cook to @ 120�? �ºC or 35psi. 5. Retain in the cooker for 15 to 20 minutes. 6. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 25Kg net weight PP bags with moisture-proof liner inside
Product description White corundum is made of high quality aluminum oxide powder as raw material, refined and crystallized by electric melting. It has high purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance and stable thermal performance. Its hardness is slightly higher than that of brown corundum.It is suitable for grinding fine grain abrasive such as high carbon steel, high speed steel and stainless steel. chemical component Physical characteristics size AL2O3 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# â?¥99.5% 0-1mm 1-3mm 3-5mm 5-8mm â?¥99.5% 100#-0 200#-0 320#-0 â?¥99% FEPA:F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 JIS:#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 â?¥99.2%
Brown fused alumina corundum is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications.
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu. There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness. Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3 Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits. We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains. These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
Brief information WFA white emery sand grit 36 was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. WFA white emery sand is white with the main crystal phase alpha-Al2O3. The WFA white emery sand produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Al2O3 99.50min Color White SiO2 0.08max Bulk density 3.65-3.85/cm3 Na2O 0.26max True density 3.95-3.97g/cm3 Fe2O3 0.06max hardness 9 Usage Abrasive tools ,sand blasting content of magnetic substance 0.0023%max SIZE: emery sand grit 36 46 60 80 100 120 150 180 220 Mills:WFA white emery sand plants Sales Company:Zhengzhou Haixu Abrasives Co.,Ltd
Condition : Good Quality : Good Storage : Cool and dry place Purity : 100% Specialty : Highly Effective Application: Blasting/ Cleaning Media Color: White Specific Gravity: 3.6 - 3.85 Delivery Time: 1 Day FOB Port: Greater Noida Payment Terms: Cash in Advance (CID), Cash Advance (CA) Main Domestic Market: All India
Size Customized Type Single Sided Usage Surface protection film Adhesive Type Yes Transparency Transparent Processing Type Multiple Extrusion We have LDPE Protection Tapes in transparent, white, black & white and black colors with different thickness. Features: Adjustable peeling force Excellent protection against abrasion and scratches No adhesive residue, weather resistance Easy to peel off, excellent workability and wide range of thickness. Usage: Protection of aluminum, S.S or G.I sheets and coils against scratches and dust during transportation/carving/polishing and handling. For anodized/powder coated/PVDF coated aluminum profiles, Polycarbonates/glass and plastic body etc
General Specification * Well Dressed and Cleaned * Drained from Excess Water * Cooled Down and Frozen Fresh * No Bad Smell * No Black Spots * No Excessive Blood or Blood Stains * No Bruise * No Chemical Burns * Outer Yellow Skin Off * White Color * Strictly Halal slaughtered * Broken Bones Less than 1% * Moisture Less than 3% PRODUCT Frozen Whole Chicken , Chicken Cuts , Chicken Offal Country of Origin Brazil, South America Quality Free Range, Hormone Free, Grade A Slaughter Method Halal Shelf Life 24 months from production date Incoterm FOB, CIF any Port without problems Authorization for Export China Mainland, Hong Kong, Haiphong, Vietnam, Thailand Shipping to over 200 countries Inspection Certification SGS, CCIC or any International Surveyor Freezing Process BQF (Block Quick Frozen) & IQF (Individually Quick Frozen) - Blasted at minus 40 Degrees - Storage at minus 20 Degrees - Transported at minus 18 ~ -22 Degrees Lead Time 7-9 days after receiving your payment instrument Loading Reefer Container 40-foot full container load (FCL) equivalent to 27 metric tons +/-2% Port of Loading Port of Santos Brazil (BRSSZ) and Port of Paranagua (BRPNG)
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. White soda feldspar has high sodium content. It is a common raw ingredient used in glass, ceramics, and to some extent in paint, plastics, and rubber as a filler and extender. The alumina from feldspar improves the hardness, durability, and chemical corrosion resistance of glass. Feldspar's alkalis (calcium oxide, potassium oxide, and sodium oxide) operate as a flux in ceramics, reducing the melting temperature of a mixture. We at Aryan Tiles have an enormous selection of both white potash and white soda feldspar minerals. We have a deep understanding of how our Feldspar minerals can be used in manufacturing our customersâ?? end-products and suit their particular industryâ??s needs. And, thus we have been able to supply to various industries and optimize our customersâ?? product manufacturing with our premium quality mineral
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. The white potash is a distinctive mineral with more potassium content. Our feldspar mineral is of high purity grade, free from impurities and naturally sourced. Our skilled personnel use technology advanced machines to extract the supplied feldspar under their close supervision. This feldspar is utilized in variety of industries, including building, mining, chemical, and others. It is also ideal for making porcelain and earthenware.
Kaolinite is the mineral that is derived from the rock called â??Kaolinâ?? and from there, it gets its name. It is also commonly known as â??China Clayâ??. Kaolin is mined from the regions of Gujarat, Rajasthan, Kerala, West Bengal and Jharkhand in India The physical properties of Kaolin include high brightness, non-abrasiveness, poor conductivity of heat and electricity and it has naturally fine particles. Kaolin remains white after calcination due to its refractory properties and can be easily dispersed in water. There are several variations within Kaolin such as Hydrous Kaolin, Metakaolin and Calcined Kaolin. We offer a vast range of Kaolin-based minerals to several businesses from paper manufacturing to porcelain tableware, paints, cosmetics, packaging, rubber and pharmaceuticals to name a few. We customize our minerals according to the needs of the industry of our clients. Hydrous Kaolin has fine particles with plate-like shapes and inertness in terms of chemical reactivity, whereas, Metakaolin is created by the process of calcination of Kaolin. It is a white mineral additive which is most popularly used in cement-based products. In contrast to this, Calcined Kaolin is manufactured by heating the finest natural kaolin to high temperatures in a kiln. This calcination process changes the size and shape of the particles, enhances the whiteness and hardness of the mineral and improves its electrical conductivity. Kaolinite is a clay mineral, with the chemical composition Alâ??Siâ??Oâ??(OH)â?? Various Industrial Usages: Kaolin is a very important mineral in the ceramics industry. Itâ??s high fusion temperature and white firing characteristic makes it perfect to be used in the manufacture of sanitaryware, tableware, floors & tiles and refractories. In the construction industry, kaolin is used to enhance the mechanical properties, porosity and look of several types of cement and concrete. It is also an impeccable source of alumina source in the manufacturing of fiberglass. Kaolin is used in paper manufacturing and fiber-based packaging also. Our Kaolin mineral enhances surface functionality when it is used as fillers or coating pigments and thus further helping in reducing the manufacturing cost of the paper or the packaging. Moreover, it is extensively used in decorative paints formulations as it is a natural opacifier and it is the perfect mineral when high gloss is required. Our specialized Kaolin also can be used as multi-purpose fillers to improve the performance of adhesives, plastics and rubber. We are extremely confident in our offering of Kaolin mineral as we understand how Kaolin can optimize the performance, reduce the costs and can achieve minimum carbon footprint in our clientâ??s end products
High Hardness White fused corundum for sandblasting polishing Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3
Manufacturer price white corundum/al2o3 abrasives Manufacturer price white corundum/al2o3 abrasives which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
M28M20M14M10M7M5 White corundum Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES: JIS STANDARD:#8 #10 #12 #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 FEPA STANDARD:F8 F10 F12 F14 F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 4# 3# M28 M20 M14M10M7M5
Factory Direct of White fused corundum for sandblasting polishing White fused corundum is made by Aluminium Oxide powder which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Supply WA white corundum powder WA white corundum powder which is electrically fused at high temperature. Our WA white corundum powder has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
