Basalt Chopped Fibers â?? Features & Benefits High tensile strength Resistant to alkali in concrete and require no special coatings Resist cold down to -260°F and heat up to 1,500°F Do not conduct electricity or induce electrical fields Do not absorb or wick water Will not harbor bacteria or microbial growth Has good fatigue resitance Basalt Chopped Fiber â?? Specifications Basalt Chopped Fiber Diameter: 13 microns to 20 microns Basalt Chopped Fiber Lengths: 3mm to 90mm Basalt Chopped Fiber with sizing (binder) for applications: portland cement and asphalt Basalt Chopped Fiber with sizing (binder) for resins: thermoplastic, epoxy, polyester, pva, & phenolic Basalt fibers unlike other fibers will not harbor bacteria or microbial growth. For example corrosion is caused in municipal sewers by aerobic bacteria. These convert into sulfuric acids which quickly dissolve concrete. Basalt fibers will not harbor these bacteria. Due to basaltâ??s low thermal conductivity, deposition of salts and paraffinâ??s inside the pipes is also reduced. Structural basalt composite components (such as pipes and rods) are made from unidirectional basalt reinforcement. In combination with its high specific strength (9.6 times as high as steel), high resistance to aggressive media, and high electrical insulting properties, this results in specialty products such as insulators for high voltage power lines. For asphalt applications, over one half inch less thickness can be laid down saving tons of asphalt while gaining a 30-50% better lifespan! Basalt composite pipes can transport corrosive liquids and gases. So, thinner panels with less cracking and the ability to maintain fine molded details without small areas chipping off or breaking.
Original of place: Vietnam Material: Coco outer husk, 100% natural Moisture: 35% (+- 2%), 25% (+- 2%) Length of fiber: 5-25mm Loading: 10,160 kgs/ cont 40HC Weight of block: 120kgs (+-3%)/ Block Packing: Compressed/ block
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Origin: Vietnam. Size: Customizable Color: natural. Moisture: 8% max Feature: Natural coconut fiber, Eco-friendly, Sustainable, Chemical-Resistant Coconut fiber is 100% natural. We carefully process it in different presentations so you can use it in multiple applications. Our product consists of the husk of the green young coconut. Once the husk is removed from the seed (coconut), it can be ground, sifted, chipped, and dried into multiple presentations.
Coco Fiber Specification: Moisture: Max 20% Impurities: Max 5% Color: Light Brown Length of Fiber: 7-24 cm
We provide superfine kapok fiber which grow naturally without toxins, synthetic pesticides, synthetic fertilizers, or GMO. Our company has experienced in exporting kapok fiber worldwide and our Kapok fiber is always in stock with the capacity of 60 Metric Ton to 120 Metric Ton per Month. Specification: * Grade : Super Fine Grade * Colour : Natural White Yellowish. * Moisture : 8 %. * Fibre Length : 20 - 30 mm. * Impurities : max 1% * Cert of Origin : Provided. * Cert of Phyto : Provided * Fumigation : Provide before shipment. * Packing : 25Kg/Bale, 30 kg/Bale, 50Kg/Bale, 100Kg/Bale * Packing Type : Yellow packing and white packing
Coir fibre is the major product that is extracted from the coconut husk. Coir fibres have a multitude of different applications and they are available in blocks and bales as well. The coir fibres are generally used in the production of ropes, mats and mattresses. The coir fibres that are extracted from the inner layer of the outer part of the coir husk are used in large scale production of the ropes, mattresses and brushes. Coir fibre is also the main product used in manufacturing the geotextiles. Geotextiles have a wide range of uses. But it is mainly used in limiting the soil erosion. Soil erosion has become one of the most prevalent problems of our society. Although there are various methods for limiting it but the erosion can be successfully kept in check by the use of geotextiles. Moreover, the geotextiles are also used in various types of road works and for surrounding the dams.
Cocotechniker supply high quality White and Brown coconut fibers. Packing : Hydraulically Compressed & Strapped Bale Container Loadability : 180 - 200 Bales/40 ft. HQ Container (Approximately 20MT)
Natural Sisal Fiber Type 1 Type 2 Type 3 Type 4 Sisal Fiber UG Grade Length: 110CM-130CM with a tolerance of 20%. Moisture: 10%-13% Impurity: 0-3% Classification per Grade: TYPE 1 - Colour whitish/soft cream, well brushed humidity maximum 14% without knots. Color: natural white, Brown and between white and brown. TYPE 2 - Colour cream/yellowish, well brushed humidity maximum 14% without knots. TYPE 3 - Colour cream/yellowish, well brushed humidity maximum 14%, without knots. REFUGOS (REJECT) - Colour brownish/green, humidity maximum 14%, presence of knots and high percentage of impurities. BUCHA (TOW) - Colour yellowish/brownish, humidity maximum 14%, presence of knots and a very high level of dust.
Coconut oil, coconut charcoal (bbq and shisha) organic coconut sugar, coco fiber, coco peat, organic desiccated coconut and copra meal.Product shipping
Coir fibre bale, coir pith, coco peat, grow bags, coco chips, coir needle felt,coir geo textiles,rubberized coir(latex sprayed) sheets for mattress ,mulch mats and garden articles.
***QUOTATION*** Product name: Coir Fiber Block/ Compressed Original of place: Vietnam Material: Coco outer husk, 100% natural Moisture: 30 - 35% Length of fiber: 5-25mm Loading: 17,500 kgs/ cont 40ft Weight of block: 100-105 kgs (+-3%)/ Block Packing: Compressed/ block
Product Name: Coconut Fiber 100% Natural Coconut Fiber Pattern: Raw Use :mattress production Material :coconut husk Fiber Length: 5-25cm Grade: 100% Virgin Grade Color: Brownish yellow Moisture: 18-20% Impurity: less than 3% Dust contain : less than 3%
Product name: Coir Fiber Block/ Compressed Original of place: Vietnam Material: Coco outer husk, 100% natural Moisture: max 15% Impurity: Max 2% Length of fiber: 5-25mm Loading: 17,500 kgs/ cont 40ft; 12,500kgs/ cont 20ft Weight of block: 100-105 kgs (+-3%)/ Block Packing: carton box or customer request
Product name: Coir Fiber Roll Original of place: Vietnam Material: Coco outer husk, 100% natural Moisture: max 15% Impurity: Max 2% Length of fiber: 5-25mm Weight of roll: 18-20 kg Dimension of Roll: 49x40 cm Packing; carton box or customer request
1/ Product name: Coir Fiber Roll Originak of place: Vietnam Material: Coco outer husk, 100% natural Moisture: max 15% Impurity: Max 2% Length of fiber: 5-25mm Weight of unit: 18-20 kg Dimension of Roll: 49x40 cm Packing; carton box or cusomer request
Place of Origin: Vietnam Material: Coconut Fiber Feature: Erosion Control, Biodegrades Technics: Cut Pile, Handmade Style: Customized Shape: Pillow Use: Home, Travel, Picnic, Camping Size : 6 meters or customize Location: Outdoor, Door, Beach Material: Coconut Fiber
***SPECIFICATION*** Product name: Coir Fiber Compressed Originak of place: Vietnam Material: Coco outer husk, 100% natural Moisture: max 15% Impurity: Max 2% Length of fiber: 5-25mm Loading: 17,500 kgs/ cont 40ft; 12,500kgs/ cont 20ft Weight of block: 100-105 kgs (+-3%)/ Block Packing: carton box or cusomer request
SPECIFICATION Place of origin Vietnam Material 100 Natural Coir from Coconut Color Natural Brown Color Package Compress or Roll Moisture 25 35 Raw Marterial Coconut Fiber Material Use Filling Material Feature Sustainable
SPECIFICATION Product name: Coir Fiber Roll Originak of place: Vietnam Material: Coco outer husk 100% natural Weight of unit: 18-20 kg Dimension of Roll: 49x40 cm Packing; carton box or cusomer request
