Indian Granites: Indian Granite: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing. 1. Indian Granite-Black 2. Indian Granite-Black Galaxy 3. Indian Granite-Black Pear 4. Indian Granite-Coffee Brown 5. Indian Granite-Coral Gold 6. Indian Granite-Jasemine White 7. Indian Granite-River White 8. Indian Granite-Sappahire Blue 9. Indian Granite-Silver Waves 10. Indian Granite-Steel Grey 11. Indian Granite-Tan Brown 12. Indian Viscon White 13. Indian Granit-Aspen White
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL - Minimum Quantity: 500,000 Barrels per Month Maximum Quantity: 5,000,000 Barrels per Month
Maximum Quantity: 2,000,000 Barrels per Month CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
A1, Jp54 Aviation Kerosene
Product Description - Jet Fuel Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers. Product origin - Russia - USA Key Specifications/Special Features - Jet A-1 is used globally in civil aviation gas turbine aircraft, fuel type is Kerosene. Minimum Order Size and Packaging details - "First initial trial shipment of One Million bbl, followed by a 12 month contract, with an average monthly shipment of between 2 to 4 million bbl per month. Larger monthly quantities are not normal, but can possibly be accommodated. SORRY, NO SPOT CONTRACTS ACCEPTED "
MIN QUANTITY: 2.000.000 BBLS FOR FIRST TRIAL MAX: 5.000.000. BBLS X 12 MONTHS WITH POSSIBLE ROLLS AND EXTENSION PRICE FOB: $76.00 GROSS / $72.00 NET PER BBLS COMMISSION: $4.00USD PER BBLS TO BE SHARED $2 Seller Side /$2 Buyer Side
Aviation Kerosene Colonial Grade 54 Jp 54 Jet Fuel A1 Product Description Aviation Kerosene Colonial Grade 54 Jp 54 Jet Fuel A1 Jet Fuel Is Designed For Use In Airplanes Powered By Gas Turbine Engines It Has A Clear To Straw Color Look The Most Regularly Used Fuels For Commercial Aviation Are Jet A And Jet A1 Which Are Manufactured To A Defined Worldwide Specification The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding SELLER WORKING PROCEDURES TERMS AND CONDITION FOB PRICE US8000 85 PER Barrel Negotiable ORIGIN KAZAKHSTAN Key SpecificationsSpecial Features 2710192100 Jet A1 is the standard specification fuel used in the rest of the world Jet A1 has a flash point higher than 38 C 100 F with an auto ignition temperature of 210 C 410 F
Attention To Buyer & Buyer Intermediaries. This Is To Inform The General Market Of The Availability Of The Below Products: Aviation Kerosene Colonial Grade 54 Jet Fuel Russia Origin Fob: Rotterdam/houston And Novorssiysk/primorsk Transaction Procedure Fob 1. Buyer Issues Icpo Addressed To End Seller/refinery. 2. Seller Issues Commercial Invoice For The Available Quantity And Buyer Sign And Return Back Ci With Tank Storage Agreement (tsa) From A Reliable Tank Farm Company In Rotterdam Port. 3. Seller Provide Ppop Documents For The First Trail Quantity As Stated Below To Buyer Secure Email. Statement Of Product Availability Product Passport (test Analysis Report) Injection Report (injection Report Of The Product In Trunks) Notice Of Readiness (nor) Product Injection Schedule (from A Reputable Third-party Pipeline Injection Company As A Guarantee Of Product Availability In Pipeline Trunks In Rotterdam Ready For Injection). 4. Buyer Within Maximum Of 48 Hours Upon Receiving The Above Ppop Provides Tank Storage Receipt Tsr To The Injection Company To Commence Injection From Trunks 5. Seller Provide Buyer With The Below Listed Pop Documents Within 24 Hours After Injection Is Completed Into Buyer Tanks.
Rice, corn, sugar, wheat, cement, aluminum ingots, copper scrap , used rail and hms 1&2, urea, sulphur, cooking oils, petroleum products, aviation fuel, mazut, millet, alfalfa grass, timber logs, teak wood, wood pallet.
1. Aviation Jet Fuel A1 2. Aviation Jet Fuel JP 54 3. EN590 10 ppm FOB Rotterdam, Fujairah, Houston Minimum 1,000,000 bbl Maximum 5,000,000 bbl No upper limit PROCEDURE ------------------ TRANSACTION PROCEDURES FOR FOB DELIVERY 1. Buyer accepts seller working procedure and issues ICPO with company registration certificate alongside copy of passport page 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice. 3. Seller issue TSR with GPS coordinate to Buyer Company, 4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. 5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties. 6. Seller injects product into Buyers vessel or injects into Buyers tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction. Payment Terms : LC / SBLC / MT 103/TT ---------------------------------------------------------------------- Commodity: Bonny Light Crude Oil (BLCO) Grade: NNPC STANDARD Origin: NIGERIA BLCO Quantity: Initial 1 million or 2 million barrels. Contract: 1year + 2 further years rolling Term: SPOT LIFT / OFF OPEC Price: Dated Brent 3days Before & 3days after the bill of lading $12 Less $5 GROSS $9:00 to buyer, $4:00 to buyer/seller mandate/agents, $1:00 to consultant/handler.
Min MOQ: 2,000,000 Barrels per Month Max MOQ: 5,000,000 Barrels per Month The quantity can also be exceeded upon request.
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price. Properties Melting point : 419.5C Boiling point : 911C Resistivity : 5.96 micro ohm-cm at 20 C Standard state : solid at 298 K Color : bluish pale grey Classification : Metallic We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.
Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate, intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat.Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat
Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper
Aviation fuel A-1 & Jp54 Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -Diesel D6, -Diesel 50 PPM. -BIODIESEL -Mazut M100 -Bitumen
Product Description - Colonial Grade JP-54 considered as the #1 low sulphur jet fuel Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers. Product origin - USA - Russia - Korea Key Specifications/Special Features - JP-54 is used globally in civil aviation gas turbine aircraft, fuel type is Kerosene. Minimum Order Size and PackaGing details - "First initial trial shipment of One Million bbl, followed by a 12 month contract, with an average monthly shipment of between 2 to 4 million bbl per month. Larger monthly quantities are not normal, but can possibly be accommodated. SORRY, NO SPOT CONTRACTS ACCEPTED "
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel A-1 & Jp54