INCI Name: FERULIC ACID Molecular Formula: C10H10O4 Molecular Weight: 194.18 Appearance: slightly yellow powder Purity: 98% CAS NO.: 1135-24-6 EINECS No.: 214-490-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Ferulic acid used in the skin care industry is mainly based on the whitening and antioxidant effects of ferulic acid. Ferulic acid can inhibit or reduce the proliferation activity of melanocytes.A 0.1-0.5% ferulic acid solution can make melanocytes,The quantity is reduced from 117�±23/mm2 to 39�±7/mm2;ferulic acid can also inhibit the activity of tyrosinase.A ferulic acid solution with a concentration of 5mmol/L can inhibit tyrosinase activity as high as 86 %. Even if the concentration of ferulic acid solution is only 0.5mmol/L,its inhibition rate of tyrosinase activity can reach about 35%.Ferulic acid also has the ability to scavenge oxygen free radicals and good anti-oxidation.Ferulic acid has sun protection ability.Ferulic acid can effectively absorb ultraviolet rays in the wavelength range of 290-330nm to prevent or reduce the damage of this wavelength of ultraviolet rays to the skin. Main Function: 1. Ferulic acid can protect skin against sun The chemical black name of ferulic acid is 4-hydroxy 3-methoxycinnamic acid. Among them, the commonly used sunscreen is "Ethylhexyl Methoxycinnamate (OMC)". Therefore, both of the cinnamic acid family, ferulic acid also has the effect of absorbing ultraviolet rays and sunscreen. It is also recognized as one of the sunscreens in Japan. 2. Ferulic acid can resist oxidation Ultraviolet rays will create a variety of free radicals with electrons on our skin, which will cause a series of cell damage and make the skin age down.This is photo-aging.Compared with general sunscreens, ferulic acid can also resist oxidation and eliminate free radicals. 3. Ferulic acid can be anti-inflammatory On the one hand, ferulic acid can cut off the key link in the inhibition of inflammation, such as affecting the metabolism of arachidonic acid, inhibiting the synthesis of prostaglandin PEG2, and can also calm the immune system and reduce the activation of mast cells, which can play an anti-inflammatory and anti-allergic effect. 4. Ferulic acid can whitening skin Tyrosinase is the most critical enzyme needed by melanocytes to produce melanin.Ferulic acid can inhibit the production and activity of tyrosinase,so as to achieve the whitening effect of reducing the production of melanin.
430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
Name : Bstar-150 Description ; 1.5T Superconducting MRI system Unit Price (USD) : 788000 Key Specifications/Special Features : Bstar-150 1.5T Superconductive MRI System Superconductive MRI System ?Main Field strength:1.5T ?Spectrometer: Full Digital ?Receiving Coil: Phase Array Coils ?Comprehensive scanning sequences ?Advanced imaging techniques and clinical application ?Zero consumption of liquid helium Minimum Order Size : 1 Product origin : Self-manufacture
~ Body Dimension: L*W*H (mm) 2300*1190*1500; ~ Wheel base (mm): 1570, Wheel track (mm): 1040; ~ Mass Weight (kg): 350, Enclosed Driving Cabin; ~ Max Loading (kg): 220 , Passenger For 3 (include Driver); ~ Motor Type: Permanent Magnet In-wheel DC Motor; ~ Dual Drive (KW) : Rated Power For 2-1000, Max Power For 2-2500; ~ Battery: 60V 45 - 58Ah Lead Acid Battery, Charging Time For 8-10 hours; ~ Max Continued Mileage (KM): 70-80, Max speed For 40-45 km/h; ~ Climbing Capability: 15%; ~ Brake Systems: Hydraulic Disc Brake, Hand Brake; ~ Front and Rear Tyre Size: 130 /70-12; ~ Steering Type: Hand Bar, Parking Mode For Manual (Rear Brake); ~ Operation Configuration: Button Start / Electric Window / Central Lock with Remote Control / Large Screen Multimedia terminal with Rear View Camera, MP4 and Bluetooth / Open Skylight and Rear Window / Front Wiper with Water Spray / Warm Wind and Natural Wind / USB; ~ Optional Function: Car- Carrying Air Conditioner; ~ SKD or CKD and OEM or ODM is acceptable .
Product Description And Specification; 1. Dry charged battery & MF battery. 2. Meet all DIN & JIS standard. 3. Powerful quick scrap used car batter. Product Feature; (1)Maintenance-free operation. There is no need to check specific gravity of the electrolyte or add Water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leak proof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Fe Content (%): 100%) Battery features; - Sealed and maintenance free operation battery - Non- Spill able construction design. - ABS Containers and Covers (UL94HB), UL94V-0 optional. - Safety valve installation for explosion proof. - High quality and high reliability. - Exceptional deep discharge recovery performance. - Low self-discharge characteristic. - Flexibility design for multiple install positions. - No memory effect. - CE certificate. - Wide operating temperature range. Battery Application; -Solar system - Alarm System - Cable Television - Communication Equipment - Control Equipment - Security System - Medical Equipment â?? UPS - Power Tools - Toys - Emergency Power System - LED Lig
chicken parts; 1. halal whole chicken 2. chicken leg quarters 3. chicken breasts 4. chicken wings 5. chicken feet and paws 6. chicken drumsticks 7. chicken gizzards 8. chicken liver Product description and chemical composition Detailed Description: - Washed and clean. - Without yellow skin. - No feathers. - No bad smell. - No blood. - No bruises. - No black pads. - No traces of carved deep wounds. - No ammonia burns. - Broken bones: under 3%. - Moisture content: less than 1%. - Drainage: 0 to -5 C for 8 hours. - Blasted at: -40 C. - Storage at: -18 C - 100% Fresh and Frozen Safe for human consumption Storage, loading and transportation system. Stored in chill rooms for early dispatch or frozen and stored for dispatch as required Loading is made in refrigerated pallets, containing in each pallet 1MT/1000kg. Our method of packaging, Protects the product from contamination, damage and moisture loss and spoilage by micro-organisms As customer requires, NB: We load 27 metric tons in 1 x 40 feet. We sale best quality Frozen Halal whole chicken and chicken parts like feet,paws,wings,leg,breast,drumsticks .We provide quality goods at very competitive price and we want buyers globally in need of our products contact for details as regards to our goods. 1. frozen whole chicken 2. frozen chicken feet 3. frozen chicken Paws 4. frozen chicken breast 5. frozen chicken thighs 6. frozen chicken drumstick 7. frozen chicken leg quarters 8. frozen chicken wings 9. frozen mid joint chicken
Experience the Enchanting Fragrance of Texas Cedarwood with Aromas Oils Indulge in the captivating aroma of Texas Cedarwood Essential Oil from Aromas Oils. This essential oil, carefully bottled, captures the natural essence of Cedarwood trees, offering you an authentic olfactory experience. Botany: Juniperus Mexicana, a coniferous evergreen tree belonging to the Cupressaceae family, is the source of Texas Cedarwood Essential Oil. Standing at 23 feet, this tree features needle-like leaves, a crooked trunk, and branches. The highly scented and durable wood is ideal for various applications, including timber. Overview of Texas Cedarwood Essential Oil:� Extracted from the aromatic wood of Juniperus Mexicana, Texas Cedarwood Essential Oil is renowned for its rich and balsamic fragrance. Its scent bears a resemblance to Virginia Cedarwood Essential Oil. The fresh, sweet, and woody aroma makes it a popular choice in aromatherapy, perfumery, and insect-repelling products. Benefits of Texas Cedarwood Essential Oil:� Explore the various benefits offered by Texas Cedarwood Essential Oil: Relieves stress, anxiety, promotes sound sleep, and soothes the muscles of the nervous system. Its soothing aroma aids in decongesting accumulated phlegm and mucus in the respiratory and nasal tracts. Promotes blood circulation, facilitating the removal of harmful substances from the body. Reduces the production of excess oils on the face and scalp. Blends well with:� Texas Cedarwood Essential Oil complements Clary Sage, Frankincense, Lavender, Neroli, Carrot Seed, Copaiba Balsam, Fir Needle, Patchouli, Spruce Hemlock, Rosemary, and Vetiver oils. Precautionary Measures:� To ensure safe usage, consider the following precautions: If under medical care or pregnant, consult with a healthcare professional before using this oil. Always dilute the oil before application. Not meant for internal use. Botanical Name:� Juniperus Mexicana CAS#:� 68990-83-0 Color & Odor:� Light yellow with a balsamic, woody, clean, dry, and powdery odor F.E.M.A. #:� N/A Methods of Extraction:� Steam Distilled Constituents:� Cedrol and thujopsene Solubility: Soluble in ethanol Specific Gravity: 0.95400 to 0.96700 @ 25.00 C Flash Point: 200.00 F Optical Rotation: +48 to +70 Major Constituents: Cedrol and thujopsene
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Medtronic is a multinational medical technology company that produces a wide range of medical devices and solutions. The term "SITUATE BODY SCANNER LITE" suggests a medical imaging device or system designed for scanning or imaging the human body. Here are some general considerations: Imaging Technology: The device is likely equipped with imaging technology for visualizing internal structures of the body. This could include X-ray, computed tomography (CT), magnetic resonance imaging (MRI), or other imaging modalities. Lite Version: The "Lite" designation may indicate a version of the scanner that could be more portable, compact, or focused on specific imaging applications compared to a full-scale body scanner. Situational Awareness: The term "SITUATE" might imply a focus on situational awareness, which could be relevant in medical contexts where quick and accurate imaging is essential.
8410-0254 HyperSoft 3D Advanced, 2.5mm Large Loop Dia, 4cm INDICATIONS FOR USE: The MicroPlex�® Coil System (MCS) is intended for the endovascular embolization of intracranial aneurysms and other neurovascular abnormalities such as arteriovenous malformations and arteriovenous fistulae. The MCS is also intended for vascular occlusion of blood vessels within the neurovascular system to permanently obstruct blood flow to an aneurysm or other vascular malformation and for arterial and venous embolizations in the peripheral vasculature
Umbilical Cord Clamp Product Code: MED 152 Specifications: Sterile, individually packed in peelable pouch pack Description Manufactured from nontoxic, medical grade polymer. Permanent locking system protect against the reopening of the clamp. Finger grip is provided to facilitate easy holding and locking of the clamp. Catheter clamp is also available for clamping the catheters.
IFT Machine Digital Pre-programmed Description Digital I.F.T unit is an advanced electro therapy requirement unit micro-controller circuit. Its digital display system indicates output current intensity and treatment time. Technical Specification Base 0-150 Hz Sweep 0-100 Hz Carrier Frequency 4, 2 Hz Therapy modes 4 Pole, 4 Pole vector, 2 Pole Output Current 0-100 mA Timer 0-99 minutes
Product Description We produce VRLA/SLA Battery, lead battery, Industrial Battery, 12V/ 6V Battery, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on. 12v 7ah backup battery (20hr battery) Valve regulated lead acid series UPS batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications widely used in the field of UPS, Emergency Lighting System. Battery Structure 1. Container/Cover: Made of UL94HB and LU 94V-0 ABS Plastic 2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing. 3. Separator: Import high quality AGM separator. 4. Postive Plates: PbCa grids minimize corrosion and prolong life. 5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly. 6. Vent Valve: Allows the release of excess gas automatically for safety. Power Supply 12V 7ah UPS Backup Battery (20hr battery)
The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements. 1.Environmental protection and pollution-free: the whole module using materials are non-toxic, pollution-free; 2.long safety life: the core cathode material of battery module is made of LiFeOP4, good safety performance and long service life; 3.Protection function: battery management system can protect battery module over discharge, over charge, over current and high / low temperature; 4.Equilibrium function: the battery management system has its own passive equalization, can balance the battery module each single string core; 5.Expansion: flexible configuration, multiple battery modules can be parallel expansion capacity, applicable to different standby time requirements; 6.Low power consumption: the battery has the function of automatic dormancy, when no live equipment is connected, it can enter the low power state by itself and reduce the self-loss; 7.No memory: no memory effect, shallow charge and discharge performance is excellent; 8.Wide temperature range: working temperature range-20~70, charge 0~60, discharge-20~70, good discharge performance and cycle life, Built in BMS overall protection 1.Over charged protection 2.Over discharged protection 3.Thermal protection 4.Over current protection 5.Cell balancing
Specification Shell type LFP51.2-400-MT-XDD Available electricity 21.094Kwh Rated capacity 400Ah Combination mode 16S2P BMS conifguration 16S400A Rated voltage 51.2V Operating voltage range 41.6V~59.2V Rated charge and discharge current 200A Peak current 400A Continue @410A 3s Rated charging and discharging power 10.24Kw Peak power 20.48Kw Continue @20.99Kw 3s Short-circuit current 0.8Ka@100us Cycle life 6000 Cycle 80%DOD, 25 Communication mode CAN, RS485 Parallel number No Remote data Bluetooth optional/Wifi Weight 170kg Dimensions (L*W*H) mm 585*280*1100mm Operating temperature Charging 0 ~+50 / Discharge -10 ~+60 Relative humidity 0~95% Storage temperature 3 Months -10 ~25 / 1 Year 0 ~25 Maximum working altitude 2000m Class of protection IP21 Supports inverter communication brands SMA/Growatt/TBB/Deye/GOODWE/Huawei/ Schneider/Victon energy/SOFAR/INVT Installation mode Floor mounting Power cable outlet mode Flank Standards and certification Transport UN38.3 *1 Test conditions, cell voltage 2.6V~3.65V, the new battery at +25 ±2 0.5C charging and discharging, available power may vary depending on the inverter; *2 Rated charge and discharge current and power will change due to temperature and SOC. If you have some problems about Gel Battery , or want to know more details about Storage Battery, LiFePO4 Battery, Uninterruptible Power Supply, Portable Power Station, Solar Power System, etc. Welcome to contact us! Pustunpower.com: lifepo4 battery 48v 51.2v, 50ah,100ah,150ah,200ah,300ah,400ah LiFePO4 Battery Pack Tags Lifepo4 Battery Manufacturers, Lifepo4 Solar Battery, Storage Battery manufacturers
Emergency Stretcher Trolley Product Code: MEF6106 Description Each trolley comes with Safety side railing, IV Rod, storage tray & cylinder cage. Removable X-ray translucent top with tray for holding x-ray cassettes. Adjustable height by hydraulic pump through foot pedal. Trendelenburg and reverse Trendelenburg by gas spring Gas spring assisted backrest adjustment 0 â?? 70 degrees. Corner buffer for safety. Pre-treated & epoxy powder coated. 15cms dia castors, two with brackets. Mounted on 4 antistatic sealed free maintenance castors with central locking and directionally controllable with positions: brake and steer with an option of a 5th wheel steering castor system for ease of moving. Foot Paddles on both sides for better control. Complete with collapsible, non detachable side rails and folding drip rod. SS IV Pole on one side of the bed with 2 hooks. Provided with storage jacket for patient belongings. Foam mattress with anti bacterial, disinfectant, liquid proof and fire proof material. Size: Approx 2100 x 650 x 650-950 ( LxWxH in cms)
Coconut husks are processed into tiny bits known as Coco Chips by cutting them apart. To adjust the growing medium and keep the correct air-to-moisture ratio for the roots of the plants, coco chips are added to potting soil or combined with coco peat. Additionally, it aids in the secondary roots zoneâ??s greater aeration. Coco Chips and Peat can be combined in various ratios to control the growing medium's moisture content and are often regarded by growers as the optimal growing medium. SIZES AVAILABLE : 0 to 6mm 6 to 12mm 12 to 18mm 18 to 24mm Suitable Crops: Cucumber Tomato Blackberry Strawberry Blueberry Ginger Features: Good for Root growth. Coconut Chips Media will last longer than bark and will last in your media up to 4 years. Green Roots Chips are double washed. The chips hold water and release evenly bio degradable. Can be blended with Coco Peat to increase AFP GreenRoots Coconut Chips is essential for potting soil and free flow air to root system.
Basic Info. Model NO. LFP51.2-200 Electrolyte LiFePO4 Color as Picture Usage RV/ Marine/ Telecom 5g Station/ Electric Mobility Warranty 3 Year OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 800*500*185mm Transport Package Carton Specification / Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description High Quality 51.2V 200ah Wall Mounted Lithium Battery The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements. 51.2V Wall mounted series Project Parameters Model 51.2V50Ah 51.2V100Ah 51.2V150Ah 51.2V200Ah 51.2V300Ah Nominal voltage 51.2V Nominal capacity 50Ah (2560wh) 100Ah (5120wh) 150Ah (7680wh) 200Ah (10240wh) 300Ah (15360wh) Dimensions (mm) 500*360*120 570*360*140/ 600*420*210 860*540*160 860*620*200 Weight About 30KG About 53KG About 80KG About 90KG About 120KG Working voltage 45---58.4V Floating charge voltage 54.4---55.2V Equalizing charge voltage 56---58.4V Charging current limiting 10A(The default charging current is greater than 55A, and the current limiting is on) It can be set through the upper computer Standard charging current current 10A 20A 30A 40A 40A Maximum continuous charging current 25A 40A 50A 50A 50A Standard discharge current 17A 33A 50A 66A 80A Maximum continuous discharge current 50A 100A 100A 100A 100A Charging ambient temperature 0~50 �ºC Discharge ambient temperature -20~60�ºC Storage ambient temperature 0~60�ºC Working environment Humidity :â?¤95; Altitude :â?¤4000 Communication mode It has the following communication ports CAN, RS485-1, RS232, RS485-2; CAN and RS485-1 are responsible for communicating with the inverter; RS232 is responsible for the communication with BMS upper computer, and is used as the battery software upgrade interface at the same time; RS485-2 is responsible for parallel communication between batteries. Power display mode LED light / display
Autoclave Pressure cooker type, Mirror Finish, Non-Electric (External Fuel Heated), Capacity 40 Ltrs Specifications: It uses steam to sterilize medical equipment, surgical dressings, glass, utensils, etc. rapidly and efficiently. Made of heavy duty seamless aluminum sheet. Long lasting. The lid is equipped with both a safety valve and steam release valve. A pressure gauge allow precise pressure tracking and safety. Mirror Finish. External Fuel Heated. Perfect for hospitals, public health centers, health stations, clinics, and research institutes. Size (D x H) : 350mm X 330mm + 90mm Lid. (14x16). Approximate Capacity (Ltrs.) : 40 Liters. With lid. Finish : Mirror Finish. Suitable for two Sterilizing / Dressing Drum (11x9) & (11x4.5) (Drum Not Included Drum Cost is Extra). Supplied with inner & outer stand. OPERATING INSTRUCTION / INSTRUCTION MANUAL : PASTED ON THE AUTOCLAVE. All aluminum deep-drawn seamless construction Mirror Finish. External Fuel Heated Supplied with inner & outer stand. All autoclaves are constructed from heavy gauge aluminum. It generates steam under pressure and temperature between 120C to 135C. Made from seamless Aluminium, top-loading autoclaves. Seamless construction ensures a bacteria-free environment, 25-30 minutes sterilizing cycle at 121c. With two stages overpressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve. With heat-resistant handles and steam release/control valve. Pressure Gauge: Color-coded pressure gauge showing internal chamber conditions during the cycle. The sterilization zone in green color is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121c to 127c. Dial size- 2.5?,Dial show measurement in 2 units (i) kg/cm² (ii) lb/inch². Full scale dial of pressure gauge is 0-30 lb/ inch or 0-2 kg/ cm. Caution zone in red color.
Basic Info. Model NO. LFP51.2-300 Electrolyte LiFePO4 Color White Usage Solar/ Marine/ Telecom / Electric Mobility Warranty 3 Years OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 720*260*580mm Transport Package Wooden Case Specification 120kg Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description Factory Wholesale Deep Cycle 51.2V300ah Lithium Ion Batteries LiFePO4 Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery. Product Parameters Nominal Voltage 51.2V Nominal Capacity 300Ah Energy 15.36KWh Combination mode 16S1P Cycle Life â?¥6000 Cycle, 80%DOD, 25�ºC BMS conï¬?guration 16S150A Operating voltage range 41.6V~59.2V Rated charge and discharge current 150A Peak current 160A Continue @170A 3s Rated charging and discharging power 7.68Kw Peak power 8.192Kw Continue @8.704Kw 3s Short-circuit current 0.762Ka@100us Communication mode CAN, RS485 Parallel number Recommend 6 in parallel(Maximum support 16 in parallel) Remote data Bluetooth optional/Wiï¬? Weight 120kg Dimensions (L*W*H) mm 720*260*580mm Operating temperature Charging: 0�ºC~+50�ºC / Discharge: -10�ºC~+60�ºC Relative humidity 0~95% Storage temperature