Gypframe profiles are designed for use as the framing for lightweight drylining solutions including wall elements and ceilings. We have 4 pcs rollformin line inside our factory. And can produce as your technical request.
Bed frame.Produce
Technical Data: Make: Single Layer Tent with mud flap all around the tent. Size: 6 X 13.7 M Area 82 sqm Material: Poly Cotton water-repellent and rot proof Cotton Canvas. Weight 550 gsm. Color: Natural Color. Specifications: Central Height: 3.0 M (approx) Wall Height: 2.0 M (approx) Doors: 1 Door; each door is provided with interlacing system for Opening & Closing & Velcro for sealing at sides. Windows: 12 Windows (six each of long side); each window is provided with rolled up flap & velcro for sealing at sides. Accessories: Iron Structure Frame, Iron Pegs and Iron Hammer. Packing: In strong bags tied up with strip & carrying handles.
Atlantic Salmon Frames Meat On / Off
These snap frames, poster frames, click frames, â sign frames, poster holders allow you to easily change your graphics. Our poster holders feature snap frame edges for ease of use. To change your graphics, simply snap open all four sides and place your graphic behind the clear, plastic covering.
Stainless steel frames for various types of bar and other chairs.
Available with mitered conners. Natural silver anodised finish as standard. Real colors avaliable upon request. 1000x1400 mm
Frames, spectacles.
Picture frames.
Timber frame buildings trussed rafters eco-joists.Timber engineering design, timber frame manufacturers and erectors
Edge glued beams 40x60x6000 60x60x6000 60x90x6000 70x70x6000 82x82x6000 Available individual sizes min 40mm max 200 mm
We produce PVC and MDF Interior Room Doors and Its Accessories such as Door Frame and Door Sill in . We are a manufacturer firm. Price is representative. If you want to buy products in wholesale
Sofas and frames.
A factory in Ukraine: Scaffolding parts. Delivery to EU by truck.
Make: bruchner Yom: 2002 Working width: 2400mm Horizontal : pin chain Chamber :06 Heating by : gas Mahlo weft straightner Padder at entry Drive system: with computer controller Exit plaiter/batching Location turkey Standart
Advantages of panel – frame houses: Our houses are ecologic and warm, assembled fast (within couple weeks). Mounting and assembling could be done in any season; there are minimal so called wet production processes. Fast mounting does not require temporary premises or big storage rooms on a site. There is a possibility to disassemble, which is important for temporary premises. The homes could be finished by the homeowners themselves. Elements (walls, floors and roof) of wooden panel house are prefabricated and preassembled from structural panels in our specialized workshops. It allows us to achieve high quality of work, because when the works are carried out inside of premises, elements of the house are affected by unfavourable weather, it is easier to control working conditions and there are more possibilities to use special equipment. Mounting: The houses are usually mounted straight from the trucks or containers by means of a crane, which is as a rule needed for the first 2-3 days or could be even a week, if the house is bigger. Average size building fits into two – three trucks. For the assembly of a house, modern sealing materials, galvanized fasteners and anchors (for anchoring to the foundation) are used. Our houses can be mounted and assembled by other subcontractors - construction companies or even homeowners themselves. Composition of external wall panels: As a standard, gypsum plasterboard, which has a fire factor of 1 hour, or wooden cladding planks and non-flammable PE vapour barrier film are installed from the inside of wall panel. Oriented strand board (OSB) or wooden cladding planks along with the wind protection film are installed from outside of wall panels. Mineral wool insulation is preinstalled between the vertical studs inside of panels. Other compositions of walls are also possible based upon requirements set by the country code and individual. Composition of internal wall panels – partitioning and load-bearing walls:; Timber frame is made from 95÷125 mm and 145÷195 mm thickness planed off studs respectively, mineral wool insulation is preinstalled for sound isolation. Panels are covered by plasterboards or other above mentioned materials. Floor – ceiling platform: Floor is produced from panels, which are made from 60x220 or 80x220 mm cross-section beams (depending upon planned static loads). On the upper side of the panel 22mm OSB is attached to improve the stiffness. In order to achieve minimal sound isolation cavities of the platform are filled by 100 mm insulation of mineral wool and full thickness is filled near external walls. Roof construction: Roof is produced out of joists and rafters, cross-sectional dimensions of which are usually 50÷60 x 200÷220 mm. Roof beams - joists are made from glued laminated/ glulam wooden beams based on static calculations. As per customer request, where possible, we try to preassemble roof panels including attic finishing materials and roof assembly including covering materials. Structural elements of the roof can be supplied loose or preassembled as roof panels. Thermal resistance of timber frame panel houses: Depending on the chosen materials, the resistance of walls is not less than 5.00m2 K/W and the resistance of roof is not less than 6.00 m2 K/W. Usually, additional finishing of outer walls is recommended for panel houses, therefore further thermal insulation is also possible. Special installations: Heating pipes, communication lines (low current - alarm systems, internet and television) and water supply and waste water systems are usually laid inside the flooring on the basis of chosen technical system. Panelled walls are designed and construed having in mind abovementioned systems and connections. These jobs are usually done by the local skilled and authorized personnel. Facade of the house: An individual outlook for the exterior of the house could be obtained by chosen materials. External decoration of panel walls is carried out using various materials: cladding, cement, stone plates, boards, brick finishing or plastering.Upon request of a customer house set could be delivered with preinstalled windows and entrance doors, garage doors, roofing cover, external staircase, perform their installation. Price: It depends upon area of external, internal walls, floor, construction of roof, balconies, thicknesses of elements and their finishing, number of elements, scope of a project. The price for a mirror or typical project is reduced. First, we estimate the price of basic structures of the house and at the moment varies from 260 EUR to 600 EUR per one square meter of living area. In order to have the price for the complete house, you have to know what kind of: floor cover; plumbing system; type of heating system; windows material, U-value, locks, colour, opening directions, etc.; type of wood for the external (outdoor use) staircase; roofing cover and rain drainage system; external and internal decoration / finishing materials such as plasterboards or wooden cladding, etc. Final price of individual project could be estimated knowing all the details and materials, in the best case when detailed working drawing are issued and based on the latest changes an updated specification – list of materials is issued.
WILL BE SENT ON REQUEST GOOD QUALITY BOXES
Frame constructions with tarpaulin covering - quick-to-assemble, light and multifunctional metal constructions. Thanks to their technical characteristics, they are popular all over the world. We design and manufacture frame constructions with awning covering for various purposes: warehouses sports facilities commercial objects buildings of special importance: for storage of special equipment, aviation for logistics for agriculture for industry for warming and reconstruction Product uniqueness When designing and manufacturing awning constructions, the Eldorado GS company offers modern solutions and advanced technologies: collapsible and collapsible metal frame (galvanized steel) tarpaulin (900 g/m2) wide range coverage rounded eaves and roof ridge assembly special tent material tensioning system hinged support Full service manufacturing services professional approach: a large number of high-precision production equipment and modern technology for the production of products from PVC fabric; automatic cutting machines; hot air welding welding with high frequency current; welding with a hot tip; high-level technical solutions: product quality control, which is carried out at every stage of production, ensures a high level of precision for structures Flexible approach to production deadlines Developed and organized production processes in the production of metal structures and awnings allow to optimize the delivery terms of finished products. Advantages of Eldorado GS 1. Turnkey projects Eldorado GS develops design and work documentation for the constructive solutions of the building, as well as delivers the quickly constructed buildings in complete sets. In addition, we can develop a complete building project, up to the layout and connection plan of equipment and engineering networks. 2. Minimization of building expansion costs A frame building is easy to build, rebuild and even move to another facility. 100% customizable to the set goal. We provide a comfortable environment for production processes, simplified internal logistics, adaptation of the building for transportation 3. Efficiency of capital investment It increases due to significant savings on metal structures, their delivery and installation. In addition, shorter delivery and construction times give you the opportunity to start business and generate revenue faster. 4. Project optimization Compared to the offers of other architectural offices, we reduce metal consumption for industrial buildings by up to 30%, and if the building is equipped with lifting mechanisms - up to 45%. We guarantee the safety and longevity of buildings
We offer complete construction of any building type with the help of frame technology. We take on standard building projects, as well as, custom design projects of any surface area, size, and layout. Weâ??re not just construction workers, weâ??re here to help you make your dream of a high-quality, secure, and comfortable home a reality. Thatâ??s why we value what we do and remain fully dedicated to every project that comes our way. Weâ??ve been in construction for 15 years. We have our own manufacturing plant in Latvia. Our team consists of qualified contractors and designers. With our own logistics network, we will deliver your building anywhere in Europe.
Frozen salmon frames, salmon from Scotland or Norway. Packaging 10-15-20 kg inner bag PEHD and master carton. Workable for Vietnam. We can also offer other offal of salmon and trout: bellies, fins, ridges (frames/ backbones), trimmings, heads. The volumes and terms of delivery are discussed separately with the buyer. Various packaging options are possible. The exact price of the products depends on the volume of delivery and the size of the bellies.
