HCSA binder is a hydraulic binder based on calcium sulphoaluminate, rather than calcium aluminates which are the basis of calcium aluminate cement or calcium silicates which are the basis of portland cement. The difference gives hcsa binder properties particularly suited to formulators of products such as self-leveling or self-smoothing compounds, rapid hardening screeds, tile adhesives, non-shrink grouts, rapid setting and special mortars. Hcsa binder is used in formulated products either as a hydraulic binder by itself or with the addition of calcium sulphates, or in combination with portland cement. The setting time is quicker than that of portland cement, and it also has a rapid strength development. Hcsa binder does not release free lime during hydration thus eliminates the major cause of efflorescence.
This product is an inorganic rigid waterproofing material which based on the special sulphoaluminate cement, and matching the suitable type and quantity admixture.
Aggregates are mixtures of sand, gravel, crushed rock or other bulk minerals used in construction, principally as a component of concrete, and in civil engineering. At CEMENTATION we supply aggregates for a range of core applications, from fill materials to aggregates that can be used in concrete, precast concrete, asphalt and for surface dressing. Aggregate plays an important role in concrete and construction part. We supply quality material which makes durable concrete with higher compressive strength and low permeability having better finish. We can supply a wide range of coarse, fine and blended aggregates in accordance with international standards. We acquire rock mines and stone crushing plants and enable us to fulfil contract of any size. Progressive stages if crushing and screening enable us to produce a range of aggregate sizes (06mm to 65mm) APPLICATIONS Road and Highway surfaces Constructions or Civil work Railway Ballast To make Concrete or Asphalt Filling
1.0 Lignocellulose Action in Building Material 1.1 Strong thickening and strengthening functions 1.2 Lignocellulose has good cross linking. The fiber will be linked like a blanket if mixed with other materials 1.3 The structure can lock water or other liquid inside. 1.4 Long fiber, stronger thickening 2.0 Application Dry Mixed Mortar Construction Mortar Thin Set Mortar Skim Coat Thermal Insulation and Finishing System EIFS Compounds, Mortar Cement, Lime Plaster , Skim Coat, Stucco, Adhesive Mortar , Self ?Leveling , Paints Dosage for reference : 0.1 % - 0.5 %
HPMC MHPC Grouts Mortar Admixture 1.0 Description Hydroxy Propyl Methyl Cellulose ( HPMC ) CAS No.: 9004-65-3 1. water-soluble, non-ionic cellulose cellulose ether 2. odorless, tasteless, non-toxic, white powder 3. dissolved in cold water, forming a clear or slightly solution 4.properties of thickening, binding, dispersing, emulsifying, film-forming, suspension, adsorption, gel, surface activity, water retention and protective colloid. This HPMC MHPC Industry Grade Cellulose Ether has been tested strictly. In construction Mortar, the dosage of HPMC is very low, an important additive in construction, play the role of water retention, thickener, workability in construction mortar. 2.0 Specifications Appearance White or off white powders Carbonized Temperature 280-300ºC Dry Loss, WT% =5 Methyl Content, WT% 28.0-30.0 Hydroxypropyl Content, WT% 4.0-12.0 Ph(1% solution, 25ºC) 7.0±1.0 Gel Temperature ºC 58-65 Fineness, mesh 80-120 Viscosity (2% solution, 20ºC,mpa.s) 400-200000 3.0 Application Range Construction Mortar : Masonry Mortar , Tile Glue Mortar, Tile Bond, Tile Adhesive, Grouts Mortar Wall Putty Industry : Skim Coat, Gypsum Plaster, Wall Leveling Plaster Flooring : Self Leveling Mortar, Floor Leveling Mortar 4.0 HPMC Properties Increases the water retention of construction Grouts Mortar Improves workability of construction Grouts Mortar Improves bonding of construction Grouts Mortar Increases sag resistance of construction Grouts Mortar 5.0 Service 1. Professional Construction Grade Cellulose Ether Supplier 2. Construction Chemicals and Technology Solutions Provider 3. Free formulations for construction grouts mortar 6.0 Advantages 1. Provide High Quality Products 2. Professional Technology Service Sale Team 3. Convenient Transportation, near to QINGDAO and SHANGHAI Port 4. Long years Exporting Experience 7.0 Package & Storage & Transportation A. Standard Packing : in 25kg pp bags inner with pe bags B. Big bags or other special packages as required C. Store in cool and dry environment, keep away from moisture D. Shelf Life :12 months E. Transport as non-danger goods
1.0 Description -pp fibre Polypropylene Fiber 1.1. PP monofilament is also named as pp mini-fiber 1.2. produced by referring foreign advanced technology for fiber-spinning, 1.3. modified by adding functional additive and special surface-treating. 2.00Application Aerodrome, Public Utilities, Road and Bridge Concrete Structure Field , Sculpture , light wallboard. -
Vinyl Alcohol Polymer PVA Powder in Dry Mixed Mortar 1.0 Description : Polyvinyl Alcohol, Vinyl Alcohol Polymer Short :PVA [C2H4O]n CAS No.:9002-89-5 Adhesive Agent, Emulsion Agent, Dispersant Agent , Film Forming Agent in construction mortar. Improving the flexible , water retention, and increase the adhesive, as well as reduce the wear of mortar, to enhance the workability and quality.
Re-Dispersible Polymer Powders (RDP) are redispersible polymer powders that combine the performance benefits of liquid latex modifiers with the convenience, reliability and handling /storage advantages of one-component dry-mix systems. Products are designed to improve workability, adhesion, open time and abrasion resistance when used as additives for cement plasters, wall putty, gypsum plaster, skim coat,tile adhesive mortar, and other construction mortar.
Water Reducer Application Construction mortar : Ready mixed dry mortar Cement and no-shrinking self leveling floor contentious grouts. Pile pressure grouts Emery sand wear resistant floor High fluidity self-compacting concrete Concrete Mortar -
ICG-1000 is various types of grinding aids are available to meet customer's needs for saving, cost , increasing productivity and improving quality in cement grinding.
Hpmc used for construction materials production, like cement, wall putty, concrete, and other coatings. Hydroxy propyl methyl cellulose Cas no.:9004653 Appearance white or off-white powder Gel temperature(, æ) 58-65 /62-70 /70-90 Methoxy content(%) 28-30/ 27-29 /19-24 Hydroxyl propyl content(%) 7-12/ 4-7.5/ 4-12 Ph value 5.0-7.5 Particle size 80-100 Weight loss on drying(%) , ¨¹5.0% Ash content (calculated as sulphate)(%) , ¨¹1.5% 25kg/bag
Polar bear CSA concrete road facing urgent repair material is obtained by special rapid-hardening sulphoaluminate cement with composite special admixture, this product has passed appraised science and technology achievement by Hebei province, got success apply in Haerbin airport, Moaning airport for road surface urgent repair.
Construction chemicals.
Its used in construction industry. For price, specifications and more details please contact us
Polycarboxylate superplasticizer products have been extensively used in cement or gypsum-based mortars with high fluidity and high strength requirements. It is widely used in fluid mortars, such as fluid mortar for pouring, paving, and painting. For price, specifications and more details please contact us
Methoxy%:27.0-30.0 Hydroxypropyl%:7.0-12.0 Gelling Temperature:58.0-68.0 Moisture%:less than 5.0 Residue%:less than 3.0 PH:4.0-8.0 Viscosity BK2%:50-300000. The product is packed in multi-ply paper bags with an inner polyethylene layer. Net weight 25KGS.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Feldspar is the name given to a group of minerals distinguished by the presence of alumina and silica (SiO2) in their chemistry. This group includes aluminum silicates of soda, potassium, or lime. It is the single most abundant mineral group on Earth. They account for an estimated 60% of exposed rocks, as well as soils, clays, and other unconsolidated sediments, and are principal components in rock classification schemes. The minerals included in this group are the orthoclase, microcline and plagioclase feldspars. APPLICATIONS Glass making Ceramics Porcelain Electrodes Abrasion We at CEMENTATION produce Feldspar of minerals containing Potassium and Sodium. Our supply is available in Lumps, Granules and Powder form.
Quartz is the most abundant and most common mineral on the Earth. It is found in almost every geological environment and also it is at least a component of almost every rock type. It has a hexagonal crystal structure and is made of trigonal crystallized silica. It is most varied in terms of varieties, colours and forms. The most important distinction between the types of quartz is that one is of macro crystalline, which is individual crystal visible to the unaided eye, and the other is microcrystalline or cryptocrystalline varieties, aggregates of crystals visible only under high magnification. Chalcedony is the generic term for cryptocrystalline quartz. The transparent variety tends to be microcrystalline and the cryptocrystalline varieties are either translucent or mostly opaque.
Bauxite is a naturally occurring mineral comprising mainly of aluminium hydroxides (the trihydrate Gibbsite Al(OH)3and the AlOOH monohydrate polymorphs boehmite and diaspore), with other components in the mineral typically being silica, iron oxide, titania and aluminosilicates (clay etc). It’s a rock from Laterite soil and it is a primary Ore of Aluminium. Properties of Bauxite include low iron content; a high Polished Stone Value (PSV) for high friction surfacing applications; a high melting point and density. APPLICATIONS Gunning materials High friction surfacing Minerals for abrasion Refractory castables Mouldable and Ramming Mixes Refractory mineral blends CEMENTATION believes in supplying quality bauxite with consistency to its customers across the world, according to their needs.