Bio Degradable Plastic Product Suppliers and Manufacturers

We produced different qualities in terms of Pet flake size and colors however the product standards are ensured as per international parameters of end use of the Pet Bottle Flakes. Currently we are enganged in recyling Pet bottles to make Pet flakes. We have collection center in different locations of Bangladesh for collecting PET bottles. After collection, all the bottles are sorted and the lables are removed in our own factory. It is then crushed and washed properly by a team of highly skilled trained professionals to obtain the best quality .It is then tested in our own advanced laboratory for further inspection of quality of the product.After the quality is confirmed it is then packed in plastic bags of 25kg/ 50kg. Product List: - Pet Flakes Clear - Pet Flakes Green - Pet Flakes Brown 1. Product: PET Flakes 2. Grade: recycled Bottle Flake, Hot Washed 3. Color: 100% Clear, white 4. Form: Flake 12-14mm

PE Granules High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material. Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature. We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.

Basic Details Color: Transparent, green , blue, yellow , red ,white etc. Size:1.22*2.44m 1.5*3m 1*2m etc. Thickness: 1-200mm or as your request Packing: based on your requirement MOQ:1-2 ton Payment:T/T Key Features of Acrylic /PMMA 1.Good light transmission. 2.Good weather resistance. 3.Can be molded and reprocessed. 4.Widely usage, easy to dyeing and painting. 5.Non-toxicity. 6.High mechanical strength. 7.Light weight. 8.Good impact strength. 9.Good Insulation feature, widely used for different electrical equipment. 10.Good hard coating and scratch resistance 11.Good chemical resistance, superior to most other plastic materials. 12.Easy to clean and maintain.

AS PS ABS PLA HDPE Granules Acrylonitrile - styrene copolymer. Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as engineering plastics.Excellent heat resistance and solvent resistance. Application. 1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases. 2. Special grade: blade of fan, batteries housing, lighters. 3. Refrigerator Sleeves, Miscellaneous 4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling 5. High Transparency, Heat Resistance, chemical resistance PC + Glass Fiber reinforced (GF) The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm. Grade: (ML3410-30 / MH3515-30 / MN-3110-30) 1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF) General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact. Application: Watch parts, switches and nobs, OA equipment. 2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF) Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage and dimensional stabilities. Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames. 3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF) MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance, surface aesthetics and weld line strengths. Applications: Meter cases, electrical and electronic housings.

LDPE Granules Low-density polyethylene (LDPE) is a synthetic resin using a high-pressure process via free radical polymerization of ethylene and is therefore also called high-pressure polyethyleneâ. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, and excellent electrical insulation properties. Its vapor penetration rate is low.

Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.

Virgin HDPE 7000F Polyethylene HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness. Products indicators HDPE cable material Property Unit Typical Value Mass density g/cm 0.941-0.959 Melt flow Rate(190 Centigrade /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature Centigrade MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15

Uses: -- Paint -- Plastics -- Rubber -- Putty -- Ceramics -- Chewing gum -- Coating -- Cosmetics -- Cables -- Paper -- Plastics Body powder

We are interested in supplying quality DUDU OSUN and Raw African Black Soap for smooth skins and acti-bacterial,anti-ageing qualities among others.It is also used as a natural shampoo to eliminate dry itchy scalp. We have 48 pieces per Carton , we can supply up to 500 Cartons per month if needed directly from the factory. The DUDU OSUN and Raw African Black Soap is made traditionally from pure natural ingredients and herbs from the tropical rain forest and savannah regions. It has No Artificial Colours , No Preservatives ,and Bio-Degradable. The soap is all organic and can be used on all skin types as it smoothens the skin and also acts as an anti-bacterial and anti-ageing products. QUANTITY: We have 45,000 pcs/Month Available Delivery:2-3 Days After Confirmation Of Order

Qty: 200 MT Packing: On Request Shipping: CIF/FOB Payments: Negotiable Loading Port: Nigeria Preferred Buyer Region: Worldwide Shipping port: Onne port