CELLULOSE CASINGS Cellulose casing also called skinless casing,is made from natural fiber.It is engaged with the characteristics of high strength and good elasticity. It can maintain a good size and appearance of the sausage,and has an excellent smoking performance.Cellulose casing has become an indispensable raw material for sausage production like hot dogs and Frankfurt sausage. Our cellulose casings are packed in Vacuumed polybag in cardboard boxes, resistant to humidity and air, then packed in caddy, then cartons. 50 STICKS IN ONE CADDY, 6 CADDY IN ONE CARTON usually. The casings should be stored in the cartons and caddy boxes between 4 deg C and 25 deg C, at room Relative Humidity of 50% to 70%. Keep the casing away from direct sunlight, both caddies and cartons. Unused casing should be returned to the caddy and covered completely in plastic so the casing will not dry out. If the casing does dry out due to exposure to air, put the casing in a refrigerated high humidity room to remoisturize. Always use casing FIFO: First In First Out, because the casing has a limited shelf life. Our company has abundant export experience, excellent quality products and the best service for all our clients sincerely. We insist on the value of Human-oriented and Customer-first, directed by the market and survival with good quality. Hope that we could establish stable partnership with all our clients, and seek long-term development together.
CELLULOSE CASINGS Cellulose casing also called skinless casing,is made from natural fiber.It is engaged with the characteristics of high strength and good elasticity. It can maintain a good size and appearance of the sausage,and has an excellent smoking performance.Cellulose casing has become an indispensable raw material for sausage production like hot dogs and Frankfurt sausage. Our cellulose casings are packed in Vacuumed polybag in cardboard boxes, resistant to humidity and air, then packed in caddy, then cartons. 50 STICKS IN ONE CADDY, 6 CADDY IN ONE CARTON usually. The casings should be stored in the cartons and caddy boxes between 4 deg C and 25 deg C, at room Relative Humidity of 50% to 70%. Keep the casing away from direct sunlight, both caddies and cartons. Unused casing should be returned to the caddy and covered completely in plastic so the casing will not dry out. If the casing does dry out due to exposure to air, put the casing in a refrigerated high humidity room to remoisturize. Always use casing FIFO: First In First Out, because the casing has a limited shelf life. Our company has abundant export experience, excellent quality products and the best service for all our clients sincerely. We insist on the value of Human-oriented and Customer-first, directed by the market and survival with good quality. Hope that we could establish stable partnership with all our clients, and seek long-term development together.
CELLULOSE CASINGS Cellulose casing also called skinless casing ,is made from natural fiber.It is engaged with the characteristics of high strength and good elasticity. It can maintain a good size and appearance of the sausage,and has an excellent smoking performance.Cellulose casing has become an indispensable raw material for sausage production like hot dogs and Frankfurt sausage. Our cellulose casings are packed in Vacuumed polybag in cardboard boxes, resistant to humidity and air, then packed in caddy, then cartons. 50 STICKS IN ONE CADDY, 6 CADDY IN ONE CARTON usually. The casings should be stored in the cartons and caddy boxes between 4 deg C and 25 deg C, at room Relative Humidity of 50% to 70%. Keep the casing away from direct sunlight, both caddies and cartons. Unused casing should be returned to the caddy and covered completely in plastic so the casing will not dry out. If the casing does dry out due to exposure to air, put the casing in a refrigerated high humidity room to remoisturize. Always use casing FIFO: First In First Out, because the casing has a limited shelf life. Our company has abundant export experience, excellent quality products and the best service for all our clients sincerely. We insist on the value of Human-oriented and Customer-first, directed by the market and survival with good quality. Hope that we could establish stable partnership with all our clients, and seek long-term development together.
30 ton forklift is a heavy duty diesel forklift with fork positioner, which is widely used in ports, warehouses and logistics transit centers for handling containers and heavy products. Vicgordan's 30 ton forklift has been designed and manufactured using the latest ergonomic technologies and concepts. This 30 ton forklift has a low cost of ownership, excellent visibility, unmatched productivity, safety and ergonomics for operators in the harshest environments. The instrument show all information about the forklift;it will sound alert when low brake pressure or non-lease parking brake. Every details is well-designed to guarantee the comfortability and safety. It is ergonomically designed. The combined effectiveness of control, monitor, aeration and chair improve the working efficiency for the operator. All direction has excellent vision. The right mast can be chosen from our variety of series. 2-stage (with or without free lift) and 3-stages (with free lift) are available The design of easy-maintenance point, make the inspection and service more convenient and easy. Centralized control stick is with excellent inching performance, easy to realize millimeter-scale accurate control. Through advanced FEA, kinematics and dynamics Simulation analysis and calculation, with accurate data support design base, Guarantee the rationality and excellent performance for mast and chassis structure. The overall unit is high reliability and stability. The overall unit adopts the lightweight design, with excellent fuel consumption savings.
The blank value of metal elements in the product is low, the content of lead and uranium is less than 0.01ppb, no dissolution and precipitation, no adding back material has a very low background, it not only has good resistance to temperature and various chemical reagents, but also has the advantages of convenient cleaning. Mainly used for trace analysis, isotope analysis and other high-end experimental product characteristics: 1, difficult jointless integrated mold production technology, to ensure the stability of product quality, long service life; 2. The chemical stability of PFA material can significantly reduce cross contamination, the friction coefficient is the lowest in plastics, and there is good electrical performance, and its electrical insulation is not affected by temperature. 3, high temperature resistance: the use of temperature -200 ~ +260â??, in the large temperature difference, can maintain its mechanical strength: from very low to very high temperature, PFA can maintain its flexibility without reducing toughness, and PTFE is the same, which is the highest continuous use of all fluorocarbon polymer temperature. 4, corrosion resistance: resistance to strong acid, alkali, aqua aqua, hydrofluoric acid and various organic solvents; 5, compared with similar products of polytetrafluoroethylene, its high transparency, the specific experimental process, the experimenter can observe the reaction of the sample in the cup at any time, convenient for the experiment; Moreover, the cup body has a precise calibration line, which is accurate in quantification and has minimal error, which can meet the quantitative requirements of routine experiments. 6, easy to clean: PFA itself is non-stick and has the ability to waterproof, oil and other substances, the surface is smooth, without any scratch, in the process of use, easy to clean, to meet the demanding trace analysis experiment needs.
XJ series electrothermal digestion instrument adopts the surrounding heating method to digest samples under normal pressure. The method of wet digestion is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated with imported PFA Teflon coating for corrosion prevention and non sticking, and is resistant to strong corrosion and high temperature of 260 â??. Product features: 1. The imported PFA Teflon coating on the board surface can effectively prevent the corrosion of the instrument caused by acid liquor and acid gas generated in the digestion process; 2. Working temperature: room temperature to 260 â??, can work continuously for 48 hours, 5-30 minutes can rise to 200 â?? (depending on the hole depth), and the thermal efficiency is more than 5 times higher than that of flat electric heating plate, which is more low-carbon; 3. Surrounding three-dimensional heating, small temperature difference between holes, so that all parts of the sample are heated evenly, which prevents heat loss to the greatest extent, ensures the consistency of sample processing effect, faster digestion speed, convenient use, and long service life; 4. PID temperature control digital display is adopted to ensure the stability of instrument temperature, temperature control accuracy �± 1 â??, voltage: 220V/50Hz; 5. The panel and control box can be made into components, so that the acid mist during the experiment will not corrode the components in the control box, thus increasing the service life, and multiple samples can be processed at the same time without cross contamination.
Automatic Instant 3 In 1 Coffee Stick Bag Powder Pouch Sachet Packing Machine This powder packaging machine can pack all kinds of powdery materials, using screw measurement method to avoid errors. Application The packing machine suitable for ultra-fine powder materials such as powder, flour, corn flour, milk powder, chili powder and soy flour. Specification Packing Speed: 30-80 bags/min Filling Range: 1-100 g Bag Size: Width:30-130 mm ; Length: 30-170 mm Film Width: Max.300 mm Power: 220 V, 50 HZ, 1.2 KVA Bag Type: Backside seal/3-side seal/4-side seal Machine Size: (L)1250 (W)950 (H)1920 mm (2.28 CBM) Horizontal Sealing: Netted Line / Straight Line(optional) Packing Material: Laminated film like OPP/CPP, OPP/CE, MST/PE/PET/PE Machine Texture: Carbon steel body and Stainless Steel 304 contact parts Accuracy: +/-1% Features 1.Made of stainless steel, rust and durable, easy operation and maintenance. 2.Controller by PLC, operate by touch screen, driving by stepper motor control. 3.Film moving very smooth and have sensor tracking, shape and dimension of bag is very well. 4.Horizontal and vertical sealing temperature can adjustable, better for lots of packaging film. 5.From filling, bagging, printing date, inflatable (exhaust) one-time completion. If you would like to get other information about the small powder packing machine,
The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly. Fuel metering valve can be used on fuel pumps to controls the amount of fuel entering the pump. The fuel metering valve regulates the fuel quantity which is fed to the high-pressure chambers of the high-pressure pump depending on the fuel pressure in the fuel rail. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400825 4.Function: Control emissions in combustion environments 5.Application: BOSCH OPEL SUZUKI ALFA ROMEO FIAT LANCIA 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly. Fuel metering valve 0928400735 can be used on fuel pumps to controls the amount of fuel entering the pump. The fuel metering valve regulates the fuel quantity which is fed to the high-pressure chambers of the high-pressure pump depending on the fuel pressure in the fuel rail. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400735 4.Function: Control emissions in combustion environments 5.Application: BOSCH MAN 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly. Fuel metering valve 0928400693 can be used on fuel pumps to controls the amount of fuel entering the pump. The fuel metering valve regulates the fuel quantity which is fed to the high-pressure chambers of the high-pressure pump depending on the fuel pressure in the fuel rail. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400693 4.Function: Control emissions in combustion environments 5.Application: BOSCH 6.Ciondition: 100% NEW 7.Weight(g): 194.8g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly. Fuel metering valve 0928400693 can be used on fuel pumps to controls the amount of fuel entering the pump. The fuel metering valve regulates the fuel quantity which is fed to the high-pressure chambers of the high-pressure pump depending on the fuel pressure in the fuel rail. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400693 4.Function: Control emissions in combustion environments 5.Application: BOSCH 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly. Fuel metering valve 1462C00999 can be used on fuel pumps to controls the amount of fuel entering the pump. The fuel metering valve regulates the fuel quantity which is fed to the high-pressure chambers of the high-pressure pump depending on the fuel pressure in the fuel rail. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor 2.Certification: CE, TS16949 3.Model NO.: 1462C00999 4.Function: Control emissions in combustion environments 5.Application: BOSCH 6.Ciondition: 100% NEW 7.Weight(g): 208.4g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
HDMS-CZJ300-2 If you have demand, you can contact me at any time. We will reply you as soon as possible. Advantages of ultrasonic paper inserting and cutting machine: 1. Ultrasonic cutting reduces friction, with fine incision, no debris, no deformation, no cross color, and smooth and beautiful cutting surface. 2. The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3. The cutting range is wide, and various round products, such as cake, frozen cake, cheese cake, mousse cake, pudding cake, chocolate cake, multi-layer sandwich cake, cream cake, round thousand layer cake, round cheese, sandwich, ice cream cake and other round baked foods. 4. The number of cake cuts can be selected independently, ranging from 2-24 pieces. 5. The machine can automatically cut and insert paper, reduce the cost of manual paper insertion, insert paper neatly, reduce errors and improve efficiency. 6. The ultrasonic paper inserting and cutting machine can be used for both cutting and paper inserting. The cutting and inserting are integrated and double choice. 7. The double circles of this model can cut and insert paper at the same time, with high efficiency. 8. The machine is easy to operate and can be operated by anyone. It can cut automatically and alternative labor, saving labor costs greatly. 9. The machine is stable in working condition, suitable for continuous working for a long time, and its working efficiency is greatly improved. 10. Siemens servo control has high durability, low failure rate and minimal error during cutting. 11. The ultrasonic food paper inserting and cutting machine can be customized according to the needs of customers.
HDMS-DJB600 If you have demand, you can contact me at any time. We will reply you as soon as possible. Advantages of ultrasonic food cutting machine: 1.Realize friction free and pressure free cutting mode, with neat and smooth section, no deformation, no slag dropping and no color mixing. 2. The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3. The cutting range is wide, such as mousse cake, Swiss roll, dough, egg tarts, candy, cheese, butter, sandwiches, pizza, bread, biscuits, chocolate, pies, nougat, sesame sugar, , Napoleon, thousand layer cake, pudding cake, brownie, rice cake, jujube cake nut food, baked food, various cakes, soft, crisp, sticky food, etc. 4. The cutting mode is rich, one machine can be used for many purposes, and different shapes can be set, such as round, square, triangle, diamond, roll, sheet, strip, block, etc. 5. This model can realize simultaneous cutting of double circles, with a cutting speed of 60 cuts/s and high cutting efficiency. 6. The machine is easy to operate and can be operated by anyone. It can cut automatically to reduce the use of labor and greatly save labor costs. 7. The machine is stable in working condition, suitable for continuous working for a long time, and its working efficiency is greatly improved. 8. Siemens servo control, high durability, low failure rate, accurate positioning, and minimal error in the cutting process. 9. The machine can automatically position and cut products to improve production efficiency. 10. The ultrasonic food cutting machine can be customized according to the needs of customers.
HDMS-DJB600 If you have demand, you can contact me at any time. We will reply you as soon as possible. . Welcome you to inquire. Advantages of ultrasonic food cutting machine: 1.Realize friction free and pressure free cutting mode, with neat and smooth section, no deformation, no slag dropping and no color mixing. 2. The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3. The cutting range is wide, such as mousse cake, Swiss roll, dough, egg tarts, candy, cheese, butter, sandwiches, pizza, bread, biscuits, chocolate, pies, nougat, sesame sugar, Shaqima, Napoleon, thousand layer cake, pudding cake, brownie, rice cake, jujube cake nut food, baked food, various cakes, soft, crisp, sticky food, etc. 4. The cutting mode is rich, one machine can be used for many purposes, and different shapes can be set, such as round, square, triangle, diamond, roll, sheet, strip, block, etc. 5. This model can realize simultaneous cutting of double circles, with a cutting speed of 60 cuts/s and high cutting efficiency. 6. The machine is easy to operate and can be operated by anyone. It can cut automatically to reduce the use of labor and greatly save labor costs. 7. The machine is stable in working condition, suitable for continuous working for a long time, and its working efficiency is greatly improved. 8. Siemens servo control, high durability, low failure rate, accurate positioning, and minimal error in the cutting process. 9. The machine can automatically position and cut products to improve production efficiency. 10. The ultrasonic food cutting machine can be customized according to the needs of customers.
If you have demand, you can contact me at any time. We will reply you as soon as possible. Advantages of ultrasonic food cutting machine: 1.Realize friction free and pressure free cutting mode, with neat and smooth section, no deformation, no slag dropping and no color mixing. 2.The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3.The cutting range is wide, such as mousse cake, Swiss roll, dough, egg tarts, candy, cheese, butter, sandwiches, pizza, bread, biscuits, chocolate, pies, nougat, sesame sugar, Shaqima, Napoleon, thousand layer cake, pudding cake, brownie, rice cake, jujube cake nut food, baked food, various cakes, soft, crisp, sticky food, etc. 4.The cutting mode is rich, one machine can be used for many purposes, and different shapes can be set, such as round, square, triangle, diamond, roll, sheet, strip, block, etc. 5.The machine is easy to operate and can be operated by anyone. It can cut automatically to reduce the use of labor and greatly save labor costs. 6.The machine is stable in working condition, suitable for continuous working for a long time, and its working efficiency is greatly improved. 7.Siemens servo control features high durability, low failure rate, accurate positioning and minimal error during cutting. 8.The machine can automatically position and cut products to improve production efficiency. 9.The ultrasonic food cutting machine can be customized according to the needs of customers.
The electrothermal digestion instrument adopts the encircling heating method to digest the sample under normal pressure. The wet digestion method is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated with imported PFA Teflon coating for corrosion prevention and non sticking, which is resistant to strong corrosion and high temperature of 260 . Product features: 1. The imported PFA Teflon coating on the board surface can effectively prevent the corrosion of the instrument caused by acid liquor and acid gas generated in the digestion process; 2. Working temperature: room temperature to 260, can work continuously for 48h, 5-30 minutes can rise to 200 (depending on the hole depth), and the thermal efficiency is more than 5 times higher than that of flat electric heating plate, which is more low-carbon; 3. Surrounding three-dimensional heating, small temperature difference between holes, so that all parts of the sample are heated evenly, which prevents heat loss to the greatest extent, ensures the consistency of sample processing effect, faster digestion speed, convenient use, and long service life; 4. PID temperature control digital display is adopted to ensure the stability of instrument temperature, temperature control accuracy ± 1, voltage: 220V/50Hz; 5. The panel and control box can be made into components, so that the acid mist during the experiment will not corrode the components in the control box, thus increasing the service life, and multiple samples can be processed at the same time without cross contamination.
XJ series electrothermal digestion instrument adopts the surrounding heating method to digest samples under normal pressure. The method of wet digestion is used to achieve the effects of rapid, efficient, convenient and large processing capacity. The digestion instrument surface is treated with imported PFA Teflon coating for corrosion prevention and non sticking, and is resistant to strong corrosion and high temperature of 260. Product features: 1. The imported PFA Teflon coating on the board surface can effectively prevent the corrosion of the instrument caused by acid liquor and acid gas generated in the digestion process; 2. Working temperature: room temperature to 260 , can work continuously for 48 hours, 5-30 minutes can rise to 200 (depending on the hole depth), and the thermal efficiency is more than 5 times higher than that of flat electric heating plate, which is more low-carbon; 3. Surrounding three-dimensional heating, small temperature difference between holes, so that all parts of the sample are heated evenly, which prevents heat loss to the greatest extent, ensures the consistency of sample processing effect, faster digestion speed, convenient use, and long service life; 4. PID temperature control digital display is adopted to ensure the stability of instrument temperature, temperature control accuracy �± 1 â??, voltage: 220V/50Hz; 5. The panel and control box can be made into components, so that the acid mist during the experiment will not corrode the components in the control box, thus increasing the service life, and multiple samples can be processed at the same time without cross contamination.
PTFE Seamless Fusing Machine Belt PTFE Belts Wholesale Supplier PTFE Seamless Belts Description The belt is using high tensile fiberglass or as basic material, this belt is woven by special weaving equipment and coated with high quality Teflon. As Fusing machine belt has no joint and the basic material is very strong, so the lifetime will be much longer than normal belt with joint. There is no scratch, pin holes and scar on the surface, so the apparel will be laminated even and tight. PTFE seamless fusing machine belt could be made into Anti-static surface, resulting in a much better fusing experience. Color: black and brown, but black is much more popular , for it is anti static Thickness: 0.38mm or 0.42mm . Advantages of PTFE fusing machine belts: 1. High temperature resistant and Non-stick surface 2. Excellent tensile strength, make a long lifetime! 3. Superior Anti-static surface 4. Smooth surface, no scar on it 5. Flex fatigue resistance, durable, long using life; 6. The edge could be reinforced by Kevlar rope, or PTFE rope, or PTFE thread, or metal rivet. The PTFE Fabric Belts are suitable for those application areas where products are transported, dried, steamed,coated or cooled. PTFE conveyor belts can be supplied with extremely smooth, textured , porous and open-mesh surfaces. Unique are our fabrics with a sealed wear-resistant and anti-adhesive surface.
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.