CLT (Cross Laminated Timber) cross-glued wooden wall slabs and ceilings for residential and non-residential buildings. Massive building material made of wood.
Wood chemistry We supply the highest quality forest chemical products from raw tallow oil; An environmentally friendly product made from forest raw materials; Alternative to petrochemical products; High-grade products with a minimum of impurities and foreign substances.
General information for plywood Plywood is made of 100% birch veneer and is in demand all over the world due to its high strength, stability of parameters, light weight, increased moisture resistance, as well as the unique texture of the surface. Laminated plywood (FOF) coated with phenolic or melamine films on one or two sides. Laminated plywood is characterized by a high level of wear resistance, resistance to aggressive environments, increased moisture resistance and a long service life.
Durum wheat from Kazakhstan. High quality. Worldwide delivery. Characteristics in the attachment.
Wheat flour.
Sugar.
Hard wheat.
Wheat, barley, corn, maize.
Block rubber is made from Skim rubber (natural rubber) . The production process begins when we receive raw material, they will be removed dirt and be washed and be cut into smaller pieces. Then put in the oven and bake until it is all cooked, the cooked rubber will be weighted 35 kilograms per bale and be pressed into squares packed in a plastic bag to be finished.
Pellets: Pellets are an eco-friendly, renewable energy source. Pellets are made from sawdust and small fraction of wood chips under high pressure without the addition of chemical binders. Fuel briquettes: They are made of sawdust, which do not contain any harmful impurities and substances. The use is absolutely safe and environmentally friendly. They do not contain substances in their composition that could negatively affect health. When gorenje do not spark and leave behind a minimum of ash. The density is twice the density of ordinary firewood.
Wood pellets are an eco-friendly solid fuel made from compacted sawdust and related industrial wastes from the milling of lumber. Our wood pellets are the highest grade possible backed by the ENplus A1 certification. We ensure that the pellets which are delivered have the maximum energy content, deliver optimum burning efficiency and have the minimum ash content possible, all of which contribute to the lowest possible running costs. Wood Pellets are a great alternative to traditional firewood which are suitable for both residential and commercial heating. We can supply any quantity on demand Our pellets are ENplus A1 certified Wood pellet supply is in 15 kg bags, tote bags or as per your specification. Delivers wood pellet in pallets, truck loads, sea and by air. TT payments with CIF, FOB, FCA, DDP, DAP terms available.
size 140*21mm composite deck material: 50% Wood powder 38% Plastic (HDPE) 12% Additive Decking board length: 2.2M, 3.6M, 4.8M or customized Composite deck Lifespan: 25-30 years Coowin Group is one of the most professional composite decking manufacturer from China, series products including plastic lumber wall cladding, plastic timber flooring,composite decking, composite siding, plastic composite decking, wpc fencing,wpc decking, wpc deck floor, wood plastic railing, plastic wood fencing, wpc pergola, wood polymer composite flower box, maintenance free sign board, water proof trash can, fire resistant wpc ceiling, all you can dream, we can make it. Should you have any questions pls feel free to contact Blinda.
We offer a wide choice of wood lumbers, wood longs, saw timber, which come from our forest plantation: Teak (Tectonis grandis) Gmelina (Gmelina arborea) Caribbean Pine (Pinus Caribaea) Apamate (Taebuia rosea) Cedar (Cedrela odorata L) Mahogany (Swietenia macrophylla) The origin of this product is Venezuela. Our experienced forestry team carefully screen and select the longs for processing. This quality control procedure brings a final product ready to export, with clean cut, rough square log with no bark. Wood Lumbers are shaped according to customer specifications: L Long (cms), W Width (cms), T Thickness (mm) Teak , L:120-300, W:
size 150*25mm composite deck material: 50% Wood powder 38% Plastic (HDPE) 12% Additive Decking board length: 2.2M, 3.6M, 4.8M or customized Composite deck Lifespan: 25-30 years
COOWIN capped composite solid deck TS-04, 3D embossing, manufactured by using twin screw extrusion process size 200*25mm composite deck material: 50% Wood powder 38% Plastic (HDPE) 12% Additive Decking board length: 2.2M, 3.6M, 4.8M or customized Composite deck Lifespan: 25-30 years Coowin Group is one of the most professional composite decking manufacturer from China, series products including plastic lumber wall cladding, plastic timber flooring,composite decking, composite siding, plastic composite decking, wpc fencing,wpc decking, wpc deck floor, wood plastic railing, plastic wood fencing, wpc pergola, wood polymer composite flower box, maintenance free sign board, water proof trash can, fire resistant wpc ceiling, all you can dream, we can make it. Wood plastic composite are quickly becoming the premier choice for all advantage like corrosion resistant, insect resistant, scratch resistant, split resistant, toxin free, stain free... Pls visit our website: www.coowingroup.com My whatsapp/wechat/cell: +86-15318791814 Email: coowinmktd@coowingroup.com Should you have any questions pls feel free to contact Blinda.
Furniture, office chair, executive chair, high back chair, medium back chair, visitor chair, leatherite chair, boss chair, preimum chair, mesh chair, lumber support chair, waiting chair, boss table, executive table, partition table, 4 seater, conference table, u table, t table, o table, meeting table, sofa, sofa 3 seater, sofa 3+1, sofa 3+2 .Manufacture
Teak Specification Out Of The Solomon Islands A. Quantity that can be shipped on Monthly basis. 18 metric tonnes per 20ft container. This equates to 25.56 cubic metres per container. B. Ages of Teak Trees for Cutting Average maturity 26 years C. Timber Specifications Minimum and Maximum size (Height X Width)150mm to 250mm X 150mm to 250mm Lengths 2.1M and up to 4.8 M or any length as per specification order. Measurement System Quarter system or Hoppus System Allowance 1/2 - 3/4 inch for both Height, width and length D. Payment terms 30% on XXXX report at port of origin. Balance on bill of lading payable prior to arrival at destination port. E. Port of Loading Point Cruz, Honiara F. Inspection: Ministry of Forestry director, Customs and Biosecurity Officer G. Treatment received Before Shipment: - Heat Treatment Gamma irradiation - Methyl Bromides for smaller sizes - Ethylene Oxide for larger size Lumber H. Price (FOB) Australian Dollar 7,000 per cubic meter or equivalent in USD. I. Location of the Plantation All Provinces in The Solomon Islands J. Nearest City connected with Airport Honiara City, Henderdson Airport Date: 29th September 2022
Specification of product: 1. Size: Length is up to 8000mm, Width is up to 1500mm, thickness can be 12mm, 15mm, 18mm, 20mm, 22mm, 27mm and the customized size; 2. Raw material: Oak; 3. Glue: D3,D4. Feature of product: 1. The oak finger jointed board is the Eco jointed board that is the formaldehyde free glulam timber beam. Both faces are sanded well and can be faced with melamine paper or wood veneers. 2. Panels are made from Solid 20-40mm or Customized size wide lamels. Lentgh of Staves are Random Aprox 200-500mm. Grade can be from A to C. 3. Finger Joints: Quality of joints between lamels will totally exclude breakout, gaps, holes and excess glue on A face. 4. The Eco glulam timber beam is stronger ,straighter, more uniform and stable.the bending and bonding strength are 3 timers stronger than solid wood; 5. The board can easily be sawed, sliced, chiseled eye, mortise, fixed nail and so on; 6. It is the ideal materials to replace the solid beam, which can avoid the natural defects of solid lumber such as dead knots and scars split and crossed to enhance its strength, the quality and form. Usage of product: Furniture, construction components, crossbeam, framing, truck board, furniture, flooring, wood stud and packing.
Specification of product: 1. Size: Length is up to 8000mm, Width is up to 1500mm, thickness can be 12mm, 15mm, 18mm, 20mm, 22mm, 27mm and the customized size; 2. Raw material: Oak; 3. Glue: D3,D4. Feature of product: 1. The oak finger jointed board is the Eco jointed board that is the formaldehyde free glulam timber beam. Both faces are sanded well and can be faced with melamine paper or wood veneers. 2. Panels are made from Solid 20-40mm or Customized size wide lamels. Lentgh of Staves are Random Aprox 200-500mm. Grade can be from A to C. 3. Finger Joints: Quality of joints between lamels will totally exclude breakout, gaps, holes and excess glue on A face. 4. The Eco glulam timber beam is stronger ,straighter, more uniform and stable.the bending and bonding strength are 3 timers stronger than solid wood; 5. The board can easily be sawed, sliced, chiseled eye, mortise, fixed nail and so on; 6. It is the ideal materials to replace the solid beam, which can avoid the natural defects of solid lumber such as dead knots and scars split and crossed to enhance its strength, the quality and form. Usage of product: Furniture, construction components, crossbeam, framing, truck board, furniture, flooring, wood stud and packing.
Specification of product: 1. Size: Length is up to 8000mm, Width is up to 1500mm, thickness can be 12mm, 15mm, 18mm, 20mm, 22mm, 27mm and the customized size; 2. Raw material: Oak; 3. Glue: D3,D4. Feature of product: 1. The oak finger jointed board is the Eco jointed board that is the formaldehyde free glulam timber beam. Both faces are sanded well and can be faced with melamine paper or wood veneers. 2. Panels are made from Solid 20-40mm or Customized size wide lamels. Lentgh of Staves are Random Aprox 200-500mm. Grade can be from A to C. 3. Finger Joints: Quality of joints between lamels will totally exclude breakout, gaps, holes and excess glue on A face. 4. The Eco glulam timber beam is stronger ,straighter, more uniform and stable.the bending and bonding strength are 3 timers stronger than solid wood; 5. The board can easily be sawed, sliced, chiseled eye, mortise, fixed nail and so on; 6. It is the ideal materials to replace the solid beam, which can avoid the natural defects of solid lumber such as dead knots and scars split and crossed to enhance its strength, the quality and form. Usage of product: Furniture, construction components, crossbeam, framing, truck board, furniture, flooring, wood stud and packing.
