Sweetened Coconut Water Physical Characteristics: Colour : Slighty cloudy to turbid. Colour will turned yellowish during storage Flavour : Fresh coconut water taste and aroma Specific Gravity : 1.00 - 1.02 at 25 C Turbidity : Max 45 NTU Chemical : Dry Matter : 5.0 - 7.0 % pH : 5 - 5.7 Brix Level : 5.5 + 0.1 Heavy Metal: Pb : 0.1 mg/kg maximum Cd : 0.1 mg/kg maximum Hg : 0.03 mg/kg maximum As : 0.1 mg/kg maximum Microbiological: Commercially sterility : Negative Yeast : < 1 cfu/ml Mould : < 1 cfu/ml Caliform : < 3 MPN/ml E. Coli : Negative/ml Salmonella : Negative/25 ml Bacillus cereus : Negative/ml Total Plate Count : < 10 cfu/ml Packaging : The product is aseptically in Tetra Brik Aseptic: 250 ml (24 x 250 ml, volume 250.00 - 260.00 ml and weight per carton 6.30 - 6.54 kg). The product is aseptically in aseptic bag: 3 kg per bag (1 x 3 kg per bag, weight 2.97 - 3.03 kg). 20 kg per bag ( 1 x 20 kg per bag, weight 19.80 - 20.20 kg). 240 kg per bag (4 x 240 kg per bag, weight 940.00 - 980.00 kg)
Unsweetened Desiccated Coconut. PHYSICAL CHARACTERISTICS: Appereaance and Color : White, free from yellow specs or other discolorations. Flavour/Odour : Mild and sweet characteristic of coconut, free foreign flavours and odours. Size : Fine granular of coconut. Impurities : Not more than 4 dark specs per 100 grams. Granulation mesh 7 : 0% mesh 14 : 5 - 23 %. mesh 18 : 30 - 55 %. pan : 33 - 65 %. CHEMICAL CHARACTERISTICS: MOISTURE : 3.0 % maximum TOTAL FAT : 50 + 5 % (d.w.b) FREE FATTY ACID : 0.10 % maximum (as lauric acid) pH (10% dispersion) : Min 6.0 HEAVY METAL: Pb : 0.1 mg/kg maximum Cd : 0.1 mg/kg maximum Hg : 0.03 mg/kg maximum As : 0.1 mg/kg maximum MICROBIOLOGICAL: Standard Plate Count : 5.000 cfu/gram maximum. Yeast : 50 cfu/gram maximum. Mould : 50 cfu/gram maximum. Caliform : 100 MPN/gram maximum. E. Coli (Type 1) : Negative/1 gram. Salmonella : Negative/25 gram. Staphylococcus aureus : 10 cfu/gram maximum. PACKAGING: Standard Packing 25 Kgs nett weight in multiwall kraft paper bag with inner polyliner, weight 24,88 - 25,13 Kg. Each delivery identified by marking the grade of DC, Lot Number, Production Code, Self Life, Handling, and Supplier.
Firewood BIRCH 25 L (pcs). One of the main properties of firewood is heat (calorific value). Calorific value is the size that indicates how much energy a certain amount of burnt firewood emits. Firewood is divided into three groups of heat: The first group of heat is wood of oak, ash, birch, hornbeam, maple, elm, with a calorific value of 2250 to 2500 kcal. The second group of heat is black alder, pine firewood, the caloric content of which is from 1800 to 1900 kcal. The third group of heat is firewood of alder, aspen, linden, willow, spruce, poplar, with a calorific value of 1500 to 1700 kcal. Firewood of the first group of heat is the most incandescent, so it is best suited for loaded boilers of higher power, but it is not recommended to fire clay or ovens, since too high combustion temperatures can lead to cracking of cocci or the furnace itself. We offer broken dried firewood from birch, ash, alder, black alder, aspen wood, neatly placed in rows in wooden containers. The density of the volume of neatly stacked firewood is significantly higher than that of smashed firewood. The volume of one container is 1.5 m3 and corresponds to 2 m3 of the volume of combined firewood. Firewood containers in your yard ?less busy space, garbage, handling after stacking firewood in a firewood shed. Wooden containers can also replace firewood, just by placing them in the yard in the desired place and covering their top with any coating. The advantage of the firewood we offer: *there is no need to overload the translated firewood; *unloading in a place convenient for you (firewood, pantry, etc.); *wooden containers remain with the customer; *quality firewood in convenient packaging at a low price. We can also offer dry split firewood in bags of 25 ltr. and 40 ltr each.
Parameter: Maximum swing diameter over bed: 800 mm; Maximum turning length: 3000 mm; Maximum length of two centers: 3000 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 5900 kg; Machine overall size: 5160x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 800 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4900 kg; Machine overall size: 3660x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4200 kg; Machine overall size: 3160x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 3000 mm; Maximum length of two centers: 3000 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 5700 kg; Machine overall size: 5160x1380x1450 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4700 kg; Machine overall size: 3660x1380x1450 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4000 kg; Machine overall size: 3160x1380x1450 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 2000 mm; Maximum length of two centers: 2000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2570 kg; Machine overall size: 3668x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2220 kg; Machine overall size: 3168x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96 (37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2070 kg; Machine overall size: 2668x1000x1267 mm;
Rebar Coupler The splicing couplers model is divided into 9 categories according to the Rebar Coupler. (Unit: mm) 1).The parameter of couplers Size(mm) O D�±0.5ï¼?mmï¼? Threadï¼?mmï¼? L�±0.5 (mm) Pitch Rib peeling coupler weight/pc (kg) Thread Angle �¦16 25 M16.5 40 2.0 0.111 60 Degree �¦18 28 M18.5 45 2.5 0.136 �¦20 31 M20.5 50 0.175 �¦22 33 M22.5 55 0.203 �¦25 37 M25.5 60 0.266 �¦28 41 M28.6 70 3.0 0.375 2).The Characteristics of the Usage Mode usage occasion Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut. 3).The material of the splicing coupler The material of the splicing coupler is constructional quality steel of No.45 steel.
Welding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube/single module to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,30khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11.Coloered LCD display,easy to use Model TIG200 TIG250 TIG250PFC ACDC TIG300 ACDC TIG400DC TIG500DC TIG500 ACDC Rated Input Voltage(V) 1~230 3~400 95-275 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 33 30 25 22 31.5 43 43 No-load Voltage(V) 68 68 68 70 70 70 70 Power Factor 0.65 0.7 0.99 0.7 0.7 0.7 0.7 Output Current Range (A) 5-200 5-250 10-250 5-300 5-400 5-500 10-500 Duty Cycle(%)40C�° 25% 60% 25% 60% 60% 60% 60% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 8.5 12 13 22 22 28 40 Dimension(mm) 410x180x330 410X180X330 410X180X330 410X220X405 650X285X510 650X285X510 680X285X510 WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products. Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock. For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement . Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc.
Product Description 200A/250A/300A/400A/500A/630A DC TIG Welder/MMA Welder/DC Welder/TIG Welding Machine Lift TIG/Hf TIGWelding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,35khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,over voltage,under voltage protection to prevent machine damage 10.Colored LCD display,easy to use WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products.Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock.For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement. Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc. Model CUT-30 CUT-45PFC CUT-60CNC CUT-65CNC CUT-80CNC CUT-100CNC CUT-120CNC Rated Input Voltage(V) 1~230 95~275 3~400 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 40 29 15.7 18 30 33 43 No-load Voltage(V) 320 265 400 400 415 415 415 Power Factor 0.65 0.99 0.7 0.7 0.7 0.7 0.7 Output Current Range (A) 10-30 10-45 15-60 15-65 15-80 15-100 15-120 Duty Cycle(%)40C�° 25% 25% 60% 60% 60% 60% 80% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 7 8.5 18 20 25 30 32 Dimension(mm) 360x180x330 410X180X330 410X220X405 410X220X405 450X220X405 450X220X405 550X260X490
Product Description 200A/250A/300A/400A/500A/630A DC TIG Welder/MMA Welder/DC Welder/TIG Welding Machine Lift TIG/Hf TIGWelding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,35khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,over voltage,under voltage protection to prevent machine damage 10.Colored LCD display,easy to use WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products.Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock.For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement. Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc. Model CUT-30 CUT-45PFC CUT-60CNC CUT-65CNC CUT-80CNC CUT-100CNC CUT-120CNC Rated Input Voltage(V) 1~230 95~275 3~400 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 40 29 15.7 18 30 33 43 No-load Voltage(V) 320 265 400 400 415 415 415 Power Factor 0.65 0.99 0.7 0.7 0.7 0.7 0.7 Output Current Range (A) 10-30 10-45 15-60 15-65 15-80 15-100 15-120 Duty Cycle(%)40C�° 25% 25% 60% 60% 60% 60% 80% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 7 8.5 18 20 25 30 32 Dimension(mm) 360x180x330 410X180X330 410X220X405 410X220X405 450X220X405 450X220X405 550X260X490
Product Introduction Bifenazate 25% + Etoxazole 15% 40%SC. Product Feature This product is a formulation of bifenzate acaricide and diphenyloxazoline derivative acaricide. It has a strong killing effect on the eggs, larvae, and adult mites at various stages, and has a fast-acting effect and long duration. Advantage This agriculture insecticide is effective for all developmental stages of mites, with egg-killing activity and knockdown activity against adult mites. It has high safety to crops, without affecting crop growth, and has minimal effect on predatory mites. It has long duration, and lasting efficacy thus is suitable for high-resistance pest control. Applicable Crops Fruit trees, vegetables, etc. Targets It is mainly used to control spider mites in the active period, and it has egg-killing effect on other mites, especially the two-spotted spider mite. Uses and Recommendations Crop Targets Dosage Application method Citrus tree Spider mite 8,000-10,000 times Spray diluted with water Apple tree Spider mite 8,000-10,000 times Spray diluted with water
Product Introduction Atrazine 24%+Topramezone 1% 25%OD. Product Feature Topramezone is a new type of pyrazolone herbicide for post-emergence stem and leaf treatment. It has a systemic effect and can be absorbed by the leaves, roots and stems of plants. Atrazine is a selective systemic pre-emergence and post-emergence herbicide. It is mainly absorbed by roots, but less absorbed by stems and leaves, and quickly transmitted to plant meristems and leaves, interfering with photosynthesis and causing weeds to die. This compound has a significant synergistic effect and can effectively control annual weeds in corn fields. Advantage It is compounded by two herbicides with different mechanisms of action. The control effect is rapid, and the effect can be seen within 2-5 days after the medicine, and the effect is longer. Broad-spectrum control of annual gramineous and broad-leaved weeds in corn fields. Easy to rotate with other herbicides. Applicable Crops Corn field. Targets The main weeds in the corn field: crabgrass, amaranthus, stigma, barnyard grass, purslane, etc. Uses and Recommendations Crop Target Dosage Application method Corn field Annual weeds 2700-3300 ml/ha Spray on the stem and leaf
AUGUST CIF PRICES ONLY: 12.500 $575,00 25.000 $555,00 50.000 $535,00 100.000 $515,00 200.000 $505,00 $5 USD Commission (NO OVERPRICE) $2.50 sell / $2.50 buy PAYMENT INSTRUMENT: SBLC / DCL (MT 700 - 760 / 103) 100% AGAINST SET OF LOADING DOCS + SGS; TRANSFERABLE, DIVISABLE, IRREVOCABLE, OPERATIVE AND CONFIRMED BY A TOP 25 BANK CONTRACT GUARANTEE: DLC/SBLC VALUE OF 02 MONTHS WITH MONTHLY PAYMENTS VIA SWIFT MT 103 ; ALL SUPPLIERS HAVE CERTIFIED AUTHORIZATION FOR CHINA CONTINENTAL GACC PERFORMANCE BOND: 2% (ONLY CONTRACT 12 MONTHS)+ INSURANCE 110% PROCEDURES ICPO WITH BANKING DETAILS + RWA OR EQUIVALENT POF TO FORMALIZE THE REQUEST; SELLER SEND SCO / FCO T BE SIGNED AND RETURNED WITH ICPO FROM BUYER; SELLER ISSUES CONTRACT DRAFT FOR ANALYSIS TO BE SIGNED; SHIPMENTS COMENCES ACCORDING TO THE AGREED IN CONTRACT; COMMISSIONS ARE PAID FOR EVERY SIGNATORY OF THE NCNDA & IMFPA. FOR SPOT / TRIAL ORDERS, ADD $35.00 PER MT FOR THE DESIRED QUANTITY. COMMISSION FOR PURCHASE AND SALE GROUPS AND LINK AGENTS FIXED AT TOTAL FOR DIVISION. IMPORTANT INFORMATION: DOES NOT APPLY P.B
Edible seeds from the peanut plant, used in cooking, oil production, and as a snack, known for their nutty flavor and health benefits. Origin India MOQ (Minimum Order Quantity) Price and Freight Size Dependent, Exact MOQ can be known at enquiry Lead Time Vendor Dependent, Exact Lead Time can be known at enquiry Payment Terms Please find payment terms on product quotation Shipping Information Enquire for Freight Information Company Information Modulus Trade Hub Grade Bold, Java Packaging 25 kg, 50 kg bags, customized packaging Shelf Life 1-2 years Certification ISO, FSSAI, Organic (if applicable) HS Code 12021010 Nutritional Information High in protein, healthy fats, vitamins E and B Purity 99%+ Germination Rate 85%+ Oil Content 40-50% Taste Nutty, slightly sweet Health Benefits Supports heart health, improves skin health, high in antioxidants
