Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
1) High-strength,high flexibility,high temperature,high wear resistance. 2) High-precision metal seal. 3) locking roller ball,to adapt to high-speed. 4) The use of high strength hig toughness carbide teeth. 5) Hours in the rotary cone bit with the impact,crushing and shearing the role of broken rock. 6) cone bit to adapt to the soft,medium and hard of various strata. 7) Reasonable price and long working life.
The Hammer Union can be used for cementing trucks, all kinds of manifolds and other high pressure equipment, and pipes. It is an important part for transporting oil. Water, fracturing fluid and mixed fluid. These products are all made of high quality steel by forging and finishing cut. They have good. Mechanical performance and sealing property. Especially they can operate under the bad weather condition. They can be assembled fixed easily and conveniently. Main technical parameter model number collecting norm working pressure, structural length drift diameter. The product adopts some end connections of pipeline thread, tubing thread, butt-weld.
Brief description: The Gas Separator separates free gas from fluid prior to entering pumps and helps avoid costly pump damage. The Gas Separator was designed to provide a method of allowing gas to separate out of the solution and migrate up the annulus, preventing gas locking of the down-hole pump. They use centrifugal forces to separate the gas from the produced liquids, before they enter the pump. Liquids will be carried through into the pump suction while the separated gases are forced to migrate up the annulus. Using the tool allows gas-free production fluids to be carried into the pump station while the separated gases are forced to migrate up the annulus. The Beam Gas Down-Hole Separator pump increases efficiency and production. Features: 1,Gas separation 2,Production increase 3,Prevents gas locking 4,Increases pump rate/ Pump efficiency and pump rate will be increased
Overview API Rotary Drilling Rubber Hose for Oilfield steel wire spiral 1.CONSTRUCTION: It is composed of an inner rubber protection layer, middle rubber layer, steel wire spiral layer and external rubber cover. 2.APPLICATIONS: Steel wire spiral drilling rubber hoses are used in oil fields, well cementing, well repairing, geological explorations, small drilling machine, and water conveyance at coal excavations. Used to carry slurry, water at environmental temperature, and other fluids. 3.Execution Specification: API SPEC 5CT, API SPEC STD 5B, API RP 5C1, API RP 5A5, API RP 5B1, API BUL 5C3 SY/T 6194-2003, GB/T 9253.2-1999, GB/T17745-1999, SY/T 6474-2000, GB/T18052-2000, SY/T 6328-1997
Our company produce all kinds of centralizer, such as sucker rod centralzier , casing centralizer, tubing centralizer and so on. Using casing size from 5/8"-20".
Our tubing anchor anchor the tubing string in a rod pumping well .The tubing anchor effectively reduce rod, tubing, and casing wear. This cuts operating costs. Elimination of breathing and buckling of the tubing string also increases production by lengthening the effective stroke of the pump, which increases volumetric efficiency. Based on proven technology, the Anchor uses hydraulically activated hold-down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime.
The guide shoe is used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in.
The RTTS packer is a full-opening, hook wall packer used for testing, treating, and squeeze cementing operations. In most cases,he tool runs with a circulating valve assembly. The packer body includes a J-slot mechanism, mechanical slips, packer elements, and hydraulic slips. Large, heavy-duty slips in the hydraulic hold down mechanism help prevent the tool from being pumped up the hole. Automatic J-slot sleeves are standard equipment on all packer bodies. Features 1. Full-opening design of the packer mandrel bore allows large volumes of fluid to pump through the tool. 2. Can be set and relocated as many times as necessary with simple tubing manipulation. 3. Tungsten carbide slips provide greater holding ability and improved wear resistance in high-strength casing. 4. Optional integral circulating valve locks into open or closed position during squeezing or treating operations and opens easily to allow circulation above the packer
1. API Casing float shoe and float collar Descriptions: Float collar and float shoe(guide shoe) are necessary conventional accessories for down-structure of casing string. float collat and float shoe is a heat-resisting, sealer and drillable tool. it's join easy and replace for guide shoe and casing shoe. it's used to protection casing and production casign, also used to deep well and ultra deep well. it classify ordinary type and self fill-up type according to way of drilling fluid get into. 2. API Casing float shoe and float collar Features: 1) All inner parts are made of easily drillable aluminum alloy 2) The device can be connected directly to same type casing 3) Reliable back-pressure leak proof structure, enable grout or slurry flow with less resistance 4) Valve seat and valve disk can effectively prevent grout from flowing back 5) Hardness of base material is equivalent to API Spec N-80 6) API spec.Q1 and ISO9000 certification
1.TheTubing Centralizer is designed to be run in the tubing string to keep the tubing centralized which may help in preventing premature wear of the casing and tubing. 2.The Tubing Centralizer can be directly above the pump for the vibration and harmonics dampening effects and other units can be installed further up the tubing string to provide the tubing and casing protection. 3.The Tubing Centralizer has full tubing ID specifications and is available for a large variety of casing sizes and tubing connections
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 1. Material: High manganese steel 2. Standard: API 3. Features: Big torque, high effective, wide flow rate range, running stable and long using time. 4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
The API composite thread protector is made of a threaded low density or high-density polyethylene bumper, which absorbs the impact shocks and a steel shell rolled over the front edge, which insures a superior protection against hazard. The composite thread protector is available either in the open end or closed end version, liftable or non-liftable. The liftable protectors allow moving of the tubes using hooking devices and in the same time keep the tube thread and coating undamaged. The closed end protectors may have an optional vent hole designed to keep the inner pressure equal to the outer pressure. The vent hole may also have a filter, which prevents the intrusion of the foreign particles. The composite design of the composite thread protector (steel shell and high density polyethylene bumper) insures the protector integrity within the temperature range given by the API 5CT standard (-46 C·66 C). Their design allows easy setting and removing using a tube wrench. CASING/TUBING/DRILL PIPE/DRILL COLLAR THREAD PROTECTOR 1) Material: steel/plastic/steel&plastic 2) Size: 2 3/8"--- 20" 3) Thread type: STC, LTC, BTC and other thread according with customized
The specifications and main parameters Working Pressure: 1500psi Bottom Thread: 1.3/4 , 2 , 2.1/2 , 3 , 3.1/2 , 4 Bottom Connection: Box or Pin, API Tubing or Line Pipe thread. Material: AISI1045/4130 casting steel or ductile iron Split Cone Packing (rod sizes): 1 , 1.1/8 , 1.1/4 , 1.1/2 and 1.3/4
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
Dissolving Frac balls are inserted into wells to build up pressure in the ground. This high pressure created causes the fracking of specific identified areas. The balls vary in size, subject to its application. The frac balls should withstand high pressure and temperature in order to make a successful fracking process. The development of the dissolvable fracking ball has boosted functionality, efficiency of the technology, and saved on time and cost of retrieving them. Our Dissolvable Metallic Frac Balls fully dissolve into particles much smaller than those of other products on the market. The premium grade refined metal powders are blended then forged (not cast or sintered) into solid metal to ensure 100% theoretical density. 1. In-house testing capabilities to qualify custom ball designs for suitability in your completion application. 2. Each design is tested in-house for pressure rating, dissolvability and flow verification. 3. Leverage our expertise in dissolvable material technology to develop the right ball for your needs. 4. Custom packaging and stocking available.
Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters. ADVANTAGES OF DOWNHOLE MOTOR Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 1. Material: High manganese steel 2. Standard: API 3. Features: Big torque, high effective, wide flow rate range, running stable and long using time. 4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including straight body, single- bent and double-bent construction.
1. Structure Polished rod stuffing box is made up of cross shell, seal gate valves, sealing pin, sealing cap, rubber packing, etc. The bottom could be connected in thread, flange, clamp. The device could reduce the wear of the polished rod, increase oil recovery. 2. Characters (1). X-MAS tree stuffing box sealing polished rod. (2). Working temperature is < 200�°C. (3). Good chemical durability for oil and corrosive substance (4). Good wearing resistance. (5). Use to prevent the leakage of gas and liquid along a moving rod 3. Installation and usage (1) Before installation, user shall inspect the device comprehensively and clean it. (2) Pay attention to the size of polished rod is conform to the valve specifications. (3) When installation, adjust seal compression force till not leak. If the force is too big, the service lift will decrease. (4) Every time adjust the force, user shall adjust in tiny range.