Variety: all kinds of graphite packing, graphite packing ring, spiral wound gasket, graphite thread Specifications: Adjust according to customer requirements Performance: Use temperature: -200~800In non-oxidizing medium Description Graphite conductive rings are widely used in the conductive series connection of graphitization furnaces in the industrial production of modern graphite electrodes. In the sintering of the series-connected graphitization furnace,the graphite conductive ring is used in series connection,which can greatly improve the efficiency and facilitate the replacement of parts. Reduce the cracks on the end face of the electrode,increase the output rate,and better improve the quality of the electrode product.
BMS500 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system). PHEV and EV system may use different technologies of batteries. One very important parameter that mayinfluence the stability of the SOC is the temperature. The battery temperature affects vehicle performance, reliability, safety and lift-cycle cost. The BMS500 series is qualified between -40 to 85 but the transducer shows a better accuracyinarestricted temperature range in order to deliver a very accuracy current measurement.
This product is a green mercury-free battery special graphite developed by our company on the basis of the original ultra-low molybdenum and high purity graphite. It has the characteristics of high purity, excellent electrical properties and ultra-low trace elements. Various trace elements in graphite are strictly controlled by the domestic advanced chemical production process. The technical performance of the products is stable, ranking the advanced level of similar products in China. It can completely replace the imported graphite powder, which can greatly improve the use and storage life of the battery, and is an important raw material for green and environmentally friendly mercury-free alkaline batteries. Type: T-399.9 Performance: high temperature resistance, good electrical and thermal conductivity, strong chemical stability, acid and alkali corrosion resistance, non-toxic and harmless, is an excellent green environmental protection material. Application: Mainly used in green mercury-free alkaline battery, secondary battery, lithium ion battery, tube inside and outside coating.
Equivalent P-all filter element is an indispensable part of the pipeline series for conveying the medium. The filter element is usually installed in the inlet filter of the hydraulic system to filter out metal particles, polluting impurities, etc. in the fluid medium, which can protect the normal operation of the equipment. After entering the filter, the impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, just take the filter element out of the filter, treat it with industrial liquid and put it in. P-all replaces the performance parameters of the filter element Reaching the level of similar foreign filter elements, it can completely replace the P-all filter element.
The TS-1105 is a portable, card-like Bluetooth iBeacon device that uses a Bluetooth low-power chip design and features low power consumption and small size.It is equipped with a CR2032 battery that can last up to two years at 1s broadcast frequency. Model No.: TS-1105L Bluetooth Version: Bluetooth 5.1 TX Power-19.5~+2.5 dBm, Default +2.5dBm OTA: YES Distance60mBatteryCR 2032 (Replaceable) Battery Life2 Years CertificationBQB, FCC, CE, SRRC, RoHS, REACH Color: White Weight: 7g Size: 46*41*6mm OEM Custom: color, Print Logo, OEM Package, Software
FLAGSHIP PRODUCT OF THE PRIME SERIES POWERFUL LONG-THROW LIGHT FOR EVERY DAY Flagship product of the Prime series which combines a record luminous flux of 4000 lumens with an impressive range of 260 meters. Having received a longer beam distance, the flashlight retained the wide-angle output characteristic of other models of the series. Prime C2 Pro Max makes a great solution for everyday outdoor use. It will allow illuminating a large area while walking the dog in the park or camping in the woods. The flashlight is indispensable as a source of emergency lighting: in large rooms, for example in a manufacturing facility, or in case of vehicle malfunction on the highway. Prime C2 Pro Max is a universal model for security officers patrolling the premises. A beam with a large central spot and wide side spill is optimal both for use at close distances and for highlighting individual remote objects. Another important feature is record runtimes in Main modes: more than 20 hours on a single charge of the included 21700 Li-Ion battery. The flashlight also works on a common 18650 Li-Ion battery using the battery adapter. The model has several mounting options thanks to the holster, lanyard and the magnet in the tailcap. It is compatible with color filters for performing specialized tasks.
Overview Masterbatch refers to a concentrated substance made by resins with excessive additives. In plastic manufacturing, the initial attaching process is replaced by adding proportional masterbatches, making it efficient and more environmental friendly. Main applications: We have provided over 30 sets of HK series twin screw extruder china production lines. Now the price of extruder and pelletizer is reasonable, anything you need, please contact us.
Offline Inspection Machine for Stacking Battery Seamark offline stacking battery industrial x ray inspection equipment, which is suitable for inspection of various stacking process-type batteries. Seamark has 1 model XB5200 as such kind of machine. it is suitable for the inspection of stacking (blade) process-type cells in the lithium battery industry and adopts TDI line scanning technology and expandable inspection functions such as plate fold and tab fold. Offline inspection machine is typically used to make random inspections. It adopts a Hamamatsu X-ray tube and advanced FPD, which can help the operator to get a good effect image of the samples and help the operator to make the correct judgment. It is widely used in some labs and small battery manufacturing enterprises. Stacking Offline Inspection Machine Types XB5200-Stacking Battery Inspection Semi Auto Series XB5200, suitable for the inspection of stacking (blade) process-type batteries. What Types Of Defects Can The Stacking Offline Inspection Machine Detect? Angle Overhang This refers to misalignments or protrusions in the angles of the battery components. The inspection machine can identify irregularities in the alignment, ensuring the components are properly positioned. Large Area Folds Large folds in the battery material can impact the battery's structural integrity and performance. The machine is designed to identify these folds, ensuring the battery's surface is smooth and defect-free. Tab Creases Tabs are critical components in batteries, connecting different layers. Creases or deformities in these tabs can lead to electrical issues. The inspection machine can detect tab creases, ensuring the tabs are in optimal condition for proper electrical connections. How Does Stacking Offline X-Ray Inspection Machine Work? Stacking Offline Inspection Machine X-ray tubes and detectors are the core components of offline X-ray battery inspection machines. The machine provides images of the internal structure with the help of the X-ray tube and detector. FPD receives and converts the X-ray signal to an industrial computer, then the software will process the received signal through an algorithm and output the X-ray image. Offline X-ray inspection machines do not need to be used with other devices, and its easy to place and operate. FAQs of Stacking Offline Inspection Machine Is the Offline Inspection Machine suitable for small-scale as well as large-scale production? The offline inspection is suitable for random inspection. So it depends on the requirements of different battery production enterprises.
Inline X Ray Inspection Machine for Stacking Battery Seamarkzm has 1 model which is an inline winding battery x-ray inspection machine, it is XB7200. Inline winding battery x-ray inspection is widely used in different kinds of stacking batteries. XB7200 achieves fully automatic inline inspection of multi-layer stacking power batteries, using TDI line scanning image technology or using area array image acquisition technology. The inspection contents include: weighing, angle overhang, large folds, tab creases, etc. Inline x ray machine is typically used in the full automatic lithium battery production line. And the stacking batteries are widely used in the new energy car industry. Which can provide good judgment for the battery quality. Stacking Inline X Ray Inspection Machine Types XB7200-Stacking Battery Inspection Full Auto Series XB7200 achieves fully automatic inline inspection of multi-layer stacking power batteries. Why Is Stacking Inline Inspection Important? Control the Quality An inline X-ray battery inspection machine is typically used in the production line. It can easily sort out defective products during the production process, prompting companies to improve their processes. High Efficiency Fully automated inspection can accurately and efficiently control production quality, saving labor and time. Save Cost Defective products can be effectively prevented from entering the circulation process and the company's after-sales costs can be reduced. At the same time, the fully automated production line can effectively save labor. How Does Stacking Battery Inline Inspection Machine Handle Different Product Shapes And Sizes? Stacking Inline Inspection Machine Real time x ray machines handle diverse product shapes and sizes by employing adjustable loading plates for standard items and customized fixtures for irregular shapes. These fixtures secure products during inspection, ensuring accuracy. Advanced software algorithms optimize imaging parameters, guaranteeing clear results for various configurations. This adaptability enhances efficiency and precision in the inspection process, accommodating the unique requirements of different products. FAQs of Stacking Inline Inspection Machine � Can the machine be integrated seamlessly into existing production lines or quality control processes? The inline machine can be used in the full automatic lithium battery production line. What industries benefit the most from SEAMARK's Online X Ray Machine? Various kinds of lithium battery manufacturing enterprises have adopted our machine, and it helps their production a lot.
Automotive Structural Adhesive is a high-performance solution designed for vehicle construction and repairs. It offers superior bonding strength, durability, and flexibility, making it ideal for joining different materials like metals, plastics, and composites. This automotive structural adhesive enhances vehicle safety and performance by providing excellent stress distribution and resistance to heat, impact, and corrosion. Polyurethane Power Battery Adhesive Series-Structural Adhesives Surterk is focused on the research and development of innovative polyurethane adhesive materials for new energy batteries. Our goal is to enhance the energy density, safety, lifespan, and lightness of power batteries. These adhesives are primarily developed based on two key requirements: the first is structural adhesive, primarily used for structural bonding with a certain level of thermal conductivity; the second is thermally conductive adhesive, which primarily serves the function of thermal management while also meeting structural bonding needs. There are many automotive adhesives and sealants suppliers, but we are one of the best choices for you.
Inverters for Grid-Tie & Off-Grid Solar Power In the realm of solar power systems, inverters play a crucial role in transforming the direct current (DC) generated by solar panels into alternating current (AC) suitable for use in homes or to be fed back into the grid. Types of Solar Inverters Grid-Tie Inverters: 1. Purpose: Designed for systems connected to the electrical grid. Facilitate the transfer of excess energy back to the grid. 2. Features: Synchronize with the grid's frequency and voltage. Prioritize grid-supplied electricity when solar production is insufficient. Feed excess energy back into the grid, often earning credits or compensation. 3. Benefits: Cost-effective due to reduced need for battery storage. Allows for net metering, enabling users to offset energy costs. 4. Applications: Residential solar power systems. Commercial and industrial installations. 5. Considerations: Dependency on grid availability; may not function during power outages. Compliance with local regulations and utility requirements. Off-Grid Inverters: 1. Purpose: Essential for standalone solar power systems not connected to the grid. Store excess energy in batteries for use during periods of low solar production. 2. Features: Integrated with a battery storage system. Capable of handling varying loads and managing battery charging. 3. Benefits: Energy independence, suitable for remote locations. Reliable power during grid outages or in areas with unreliable grid access. 4. Applications: Remote cabins and off-grid residences. Telecommunication towers and remote monitoring stations. 5. Considerations: Requires an adequate battery bank for energy storage. Additional cost for battery maintenance and replacement. Hybrid Inverters(Battery-Based Inverters): Hybrid Inverters designed to work with energy storage systems, often used in off-grid or hybrid setups. Can switch between grid-tied and off-grid modes. These systems offer flexibility, allowing users to use solar power both when connected to the grid and during grid outages, relying on battery storage.
BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system).
Model Number:MFK-K2 Power Source:Electric Application: For Commercial & Home Use Power Supply Mode:USB recharge Material Acrylic, Plastic, Resin Shelf Life:2 years Quality Certification: CE, SGS Instrument classification: Class II Safety standard: GB15979-2002 Product Name: Nebulizer Asthma Cough Fever Medical Nebulizer Material Plastic: Power Supply Mode:Removable Battery After-sale Service:Return and Replacement Safety standard:GB15979-2002 Instrument classification: Class one Display: LED Digital Display Accuracy:3mmHg Color:grey and white Nebulization Rate:More than 0.2ml/min
CA Series-330CA30 PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336° C) , also can maintain strength at high temperature, to a certain extent, can replace metal materials. For more information about peek fc , please feel free to contact us! If you need any kinds of natural peek material, please contact us, as a professional peek suppliers, ZYPEEK is willing to offer you high quality products.
Material: N4 N6 Ni200 Ni201 Thickness: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm ,1.0mm, 1.2mm etc. Micron: 3-100um Size: 100x100mm, 200x200mm, 300x300mm, 400x400mm, other size can be customized. Porosity: 50%-90% 1) The thickness, pore size, unit weight, porosity and other performance indicators of nickel fiber felt can be comparable to nickel foam. 2) Nickel fiber felt has the characteristics of larger specific surface area, higher tensile strength and better flexibility than foamed nickel, and is suitable for making large-capacity, high-current nickel-metal hydride batteries. Application Filter material Photocatalyst series air filter screen Chemical catalyst and support materials Battery electrode material Heat exchange and adsorption materials
API 6A Slab Gate Valve Yulin Machinery This high-performance two-way flat API 6A Slab Gate Valve gate valve is ideal for high pressure critical service applications of 3000 psi to 15000 psi on wellheads, Christmas trees and manifolds. Product Description API 6A Slab Gate Valve have PFFA Series and PFF series. Details as below: PFFA Series Gate valve Full bore design eliminates efficiently pressure drop and vortex, eliminates washing by solids in fluid. Mental-to-mental seal is used between bonnet and body, gate and seat body and seat The surface of gate andseat is weld overlay with hard alloy. which has feature of corrosion resistance and washing resistance. The bonnet and stem designed with back seal, can replace stem sealing under pressure One side of bonnet is designed with sealant injection in order to supply sealant and improve seal and lubrication performance of gate and seat. Can complete with different pneumatic (hydraulic) actuator upon user s requirements Working Pressure: 2000PSI-20000PSI Nominal Bore: 1-13/16-9"(46mm-230mm) Working Medium: oil natural gas mud and gas ,containing hasco Working Temperature:-46C-121'C(Class LU) Material Class: AABBccDDEEFFHH Specification level: PSL1-4 Performance Requirement: PR1-2
Standard Features Up to six intelligent analog loops hosting as many as 1,500 Signature Series devices per panel Optional integrated eight-channel digital audio 10 amp power supply with universal 94 to 264 Vac input voltage Patented Voltage Boost technology delivers consistent volt age even at low battery power Four built-in 3-amp notification/auxiliary circuits Large 24-line by 40-character backlit LCD Simplified operation with the SpeedTouchâ?¢ rotary control 65 amp hour battery charger 64-node network nodes using copper and/or fiber Supports up to 30 R-Series remote annunciators Removable terminals on all low voltage wiring Space for up to three additional option cards such as extra SLC loops, amplifiers, or dialer/modem Optional Ethernet interface 1,100 event history log Optional earthquake hardening: OSHPD seismic pre-approval for component Importance Factor 1.5 UL2572 Listed for Mass Notification UL864 UUKL Listed for Smoke Control UL864 Listed for releasing applications using SIGA-REL
The PIU Series 0.01% grade high precision DC tester is developed on Hangzhi multi-point fluxgate current measurement technology. There are few models in the PIU family, and the maximum current can be measured by PIU testers can be up to DC10,000A. The measurement accuracy can reach 0.01%, even 0.005%. The testers are widely used for calibration of battery charging and discharging testing system. Voltage measurement range: ± (0.1V -1000V),maximum allowable error: ± 0.005%; Current measurement range: 10mA~10,000A, maximum allowable error: ± 0.005%
We are China biggest oxidized polyethylene wax manufacturer with capacity 15,000MT per year,we have been in production of OPE wax more than 20 years. With the high and stable quality,currently we have taken China biggest market share in pvc foam board,WPC,SPC and pvc stabilizer.We also have taken India 1st market share since 2017 which could be seen from the India custom data. We have advantages in high density oxidized polyethylene wax , Our OA series OPE wax can completely replace Honeywell and BASF products with more competitive price widely used in the PVC products and PVC stabilizer industry. We have also established long-term cooperation with international stabilizer manufacturers such as Baerlocher and Sunace in some advantage products like OA716 which has high melt point and good fusion,it can be used in most pvc products to replace Honeywell AC316. OA719 which has high viscosity and high melt point to replace Honeywell AC307,with the highest viscosity it take good dispersivity in high filler formulation and promote good fusion to have better surface in pvc products. OA316A+ our R&D work out the advantage catalyst same as A-C 316A, it is the only grade in the market could totally replace Honeywell A-C 316A in most application like PVC products, PVC foam board, calcium zinc stabilizer, PVC stabilizer, color masterbatch, coating, cable,emulsion , printing, dyeing and textile, asphalt modification, etc.
Introduction The ARDS series bag filter housing is a pre-filtration equipment commonly used in a variety of industrial liquids, constructed from stainless steel materials (SUS316L or SUS304). Mechanical grinding or electrochemical polishing makes the surface smooth and easy to clean. The product features a rational structure, making it easy to install and replace the filter bag. It also adopts a double sealing ring design, which ensures excellent sealing in special production environments. When the liquid passes through the filter bag, solid particles, suspended solids, sediments and other impurities can be effectively intercepted, so that the clean liquid flows out of the outlet of the filter, which helps achieve the effective filtration and purification of large particles of impurities in the liquid. Specification Material: SUS304, SUS316L Filter type: Liquid Bag type: Single bag or multi-bag Filter specification: Multi-specification selection or customization Application Suitable for liquid pre-filtration in various industries.