Oak Barrels, V=5; 10; 30; 50; 100L Order: minimum container 20''
Oak Barrels, V=5; 10; 30; 50; 100L Order: minimum container 20
VZEN IND IV (also known as Light oil, LVFO or Low Viscosity Oil) is a fraction obtained from petroleum distillation. VZEN IND IV is a light viscosity dark colour liquid fuel that is burned in a furnace, heater or boiler for generation of heat or used in an engine for the generation of power. It can be used in place of Light Diesel Oil (LDO) as it has higher GCV & Low Cost. VZEN IND IV is the most economical fuel available for industrial application. It is the most used fuel oil for industrial heating applications in Metal & Steel industry, Engineering and Leather industry. Our range of all products is widely appreciated by our clients.
This product uses fully synthetic base oil and a new formula of imported multi effect composite agents from China and the United States.It is made using the most advanced international automated modulation new technology through high shear homogenization and high-density filtration modulation. It has a strong cleaning effect and effectively inhibits the formation of carbon and sludge in the engine. The new low phosphorus formula extends the rated service life of the exhaust gas purification system. Super-span multi-stage gasoline engine oil, excellent high and low temperature performance, all-weather. prolong the service life of the engine. Excellent oxidation resistance, high shear resistance, excellent sealing and lubrication at high temperatures, effectively improving fuel economy. Reducing noise makes the engine more resistant to the test of road congestion and frequent stops and starts in modern traffic conditions. With unique fuel-saving function, even if the engine leaks oil in special circumstances, it can continue to drive to the maintenance point. Driving about 50 kilometers with blue smoke from the engine can also be repaired. Low noise, extended oil change cycle.
This product uses fully synthetic base oil and a new formula of imported multi effect composite agents from China and the United States. It is made using the most advanced international automated modulation new technology through high shear homogenization and high-density filtration modulation. It has a strong cleaning effect and effectively inhibits the formation of carbon and sludge in the engine. The new low phosphorus formula extends the rated service life of the exhaust gas purification system. Super-span multi-stage gasoline engine oil, excellent high and low temperature performance, all-weather. prolong the service life of the engine. Excellent oxidation resistance, high shear resistance, excellent sealing and lubrication at high temperatures, effectively improving fuel economy. Reducing noise makes the engine more resistant to the test of road congestion and frequent stops and starts in modern traffic conditions. With unique fuel-saving function, even if the engine leaks oil in special circumstances, it can continue to drive to the maintenance point. Driving about 50 kilometers with blue smoke from the engine can also be repaired. Low noise, extended oil change cycle.
Description VZEN IND VI (also known as heavy oil, marine fuel, LSHS or fuel Oil) is a fraction obtained from petroleum distillation. VZEN IND VI is a high viscosity dark colour liquid fuel that is burned in a furnace or boiler for generation of heat or used in an engine for the generation of power. It can be used in place of Furnace Oil (FO) as it has higher GCV & Low Sulphur than Furnace Oil. VZEN LSHS is the most economical fuel available for industrial application. It is the most used fuel oil for industrial heating application in Steel industry. Our range of all products is widely appreciated by our clients.
Product Description NLB-500 Portable Rail Impact Wrench NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification Model NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque 500N.m Peak torque 1000N.m Weight 18kg
Discover our specialized components for the oil and gas industry, engineered to withstand high-pressure environments and deliver reliable performance. Our range of products includes custom parts designed for both onshore and offshore applications, ensuring the highest standards of quality and durability.
Oil & Albuminoids combined Min 44%. Sand & Silica Max 2.5%. Moisture Max. 10% Fibre Max. 16% Aflatoxine Max. 500 PPB( 0.5PPM)
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
IPS-12RS Syringe Pump The IPS-12RS Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12RS offers unparalleled reliability and performance. Key Features: Wide Syringe Compatibility: The IPS-12RS accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12RS ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12RS offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12RS allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12RS offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12RS enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10�°C and 50�°C Storage Temperature: Between -30�°C and 85�°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12S Syringe Pump The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance and precise control over fluid delivery processes. Key Features: Wide Syringe Compatibility: The IPS-12S accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12S ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12S offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12S offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12S enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
Groundnut Is Commonly Called Peanut And It Has Numerous Areas Of Application Of Utility. It Is Used Confectioneries, Peanut Butter, Oil Extraction And It Is Used In Forming Anti-ageing Drugs. It Is Also Used For Direct Consumption. Groundnut Is A Major Source Of Oil Which Is Mono Saturated Fat And Is Healthful Type Which Is Prescribed For Skin Health Benefits. We Are Specialized In Export Of Groundnut Bold, Java And Tj With Assorted Size. We Procure Groundnut In Shell Directly From Farmers And Mandies And Process It In Our Well-equipped Machinery. We Supply Groundnut Locally And Internationally As Per Buyer Requirement. Specification Groundnut Type : Bold/ Java/ Tj Bold Groundnut Counts Per Ounce : 30/35, 35/40, 38/42, 40/50, 50/60, 60/70, 70/80, 80/90, 90/100, 120/160. Java Groundnut Counts Per Ounce : 50/60, 60/70, 70/80, 80/90, 90/100. Tj Groundnut Counts Per Ounce ; 50/60, 60/70, 70/80, 80/90, 90/100. Moisture In Percentage : Max 7 % Admixture In Percenrage : Max 1 % Broken & Split : Max 1 % Damage & Imperfect : Max 1 % Foreign Material : Max 0.1% Min, 0.50% Max (as Per Costomer Requirement) Oil Content : 42% Min, 52% Max Moulds And Live Insects : Nil Aflatoxin : Aflatoxin Negative 5 Ppb (tlc Method) 10 Ppb (hplc/elisa Method With B1b2 Cotion) 20 Ppb (hplc/elisa Method With B1b2 Cotion) We Provide As Per Customer Requirement Packing : -new Jute Bag Of 20/25/50 Kgs Gross. -new Vacuum Pack Inside And Outer Layer With Pp Woven Bags Of 25 Kgs Gross -pp Woven Bags Of 50 Kgs Gross Container Load : 19 Mt / 1 X 20 Ft 28mt/ 1 X 40 Ft
Peanut Type Bold/ Java/ Tj Bold Peanut Counts Per Ounce 30/35, 35/40, 38/42, 40/50, 50/60, 60/70, 70/80, 80/90, 90/100, 120/160. Java Groundnut Counts Per Ounce 50/60, 60/70, 70/80, 80/90, 90/100. Tj Groundnut Counts Per Ounce 50/60, 60/70, 70/80, 80/90, 90/100. Moisture In Percentage Max 7 % Admixture In Percenrage Max 1 % Broken & Split Max 1 % Damage & Imperfect Max 1 % Foreign Material Max 0.1% Min, 0.50% Max (As Per Costomer Requirement) Oil Content 42% Min, 52% Max Moulds And Live Insects Nil Aflatoxin Aflatoxin Negative 5 Ppb (Tlc Method) 10 Ppb (Hplc/elisa Method With B1b2 Cotion) 20 Ppb (Hplc/elisa Method With B1b2 Cotion) We Provide As Per Customer Requirement Packing -new Jute Bag Of 20/25/50 Kgs Gross. -new Vacuum Pack Inside And Outer Layer With Pp Woven Bags Of 25 Kgs Gross -pp Woven Bags Of 50 Kgs Gross Container Load 19 Mt / 1 X 20' Ft 28mt/ 1 X 40' Ft
