Two hole kitchen taps are divided into two types 2-hole and two-handle-controlling, and 2-hole single-control. The 2-hole and two-handle-controlling faucet has two water inlet pipes for hot and cold water, and is controlled by two handles respectively. When use a kitchen faucet with 2 holes, the water temperature can be controlled by adjusting the two handles. The 2-hole single-control faucet, is the most common type of 2 hole kitchen faucet. It has two water inlet pipes, supplying hot and cold water respectively, controlled by a single handle. Likegro quality kitchen faucets use good valve core, with brass as the main material. The two hole faucet interface and outlet are exquisite in workmanship. It's perfect flawless, even after pressing it with a finger, the fingerprints will spread out quickly, and it is not easy to attach stains. With well multi-layered electroplating surface, this two hole kitchen faucet have the function of non-fading, corrosion-resistant, and can be used for a long time. The Difference Between A 2 Hole Faucet and 3 Hole Faucet? 2-hole faucet and 3-hole faucet The difference between the two hole faucet and three hole faucet lies in the number of water outlets. The kitchen faucet with two holes is generally a household kitchen faucet. Its structure has two water inlets and one water outlet, which can be connected to both hot and cold water pipes at the same time. It is a mixer faucet. 3-hole faucets are commonly used in bathroom fixtures wholesale, with two water inlets and two water outlets. It not only to connecting two hot and cold water pipes, it can also be connected to a shower head, which is often used as a bathroom faucet at home. How Do I Know If I Have A 3 Hole Faucet? The 3-hole faucet is a universal faucet, it has two water inlets and two water outlets, the distance between the two inlets is 15cm, and their distance can be adjusted by curved feet. If your faucet has separate hot and cold handles, you have a 3-hole faucet. Can You Put A One Hole Faucet In A Two Hole Sink? You can use two separate one hole kitchen taps, one for hot water and the other for cold water, that is not mixed. Or use a 2 hole bridge kitchen faucet, that faucet mixes the water above the sink rather than below it. For more information about bath hardware and toilet seat hinges, please feel free to contact us!
Iron Oxide Pigment Powder Iron oxide powder is a well dispersed pigment with excellent light and weather resistance. Iron oxide pigment mainly refers to four kinds of coloring pigments, iron red, iron yellow, iron black and iron brown, with iron oxide oxide oxide red as the basic material, among which iron oxide red is the main one (about 50% iron oxide pigment), iron oxide mica can be used as antirust pigment and magnetic iron oxide can be used as magnetic recording material. Iron oxide pigment powder use 1ã??Iron oxide as pigment is widely used in high-grade automotive coatings, architectural coatings, anticorrosive coatings, powder coatings, and it is a kind of better environmental protection coatings. The annual consumption of iron oxide pigment in the world is more than 1 million tons, which is second only to titanium dioxide and ranks second in inorganic pigment. Adopting iron oxide as pigment, it not only retains the advantages of good heat resistance, weather resistance and ultraviolet absorption of general inorganic pigment, but also performs well in oil carrier, and the paints and inks prepared with it have satisfactory transparency. The use of semiconductor properties of iron oxide coating, due to its high conductivity, can play a role in electrostatic shielding. 2, iron oxide is commonly used in glass production coloring agent. Glass colored with iron oxide can absorb both ultraviolet and infrared rays, so it is widely used in the manufacture of heat-absorbing glass, sunglasses glass, industrial protective glass, military anti-infrared coating. It also has the function of low cost, absorbing hot wire and ultraviolet rays. 3.Globally, iron oxide pigments are widely used as colorants and protectants for wood coatings. The use of transparent iron oxide pigments instead of traditional pigments preserves clear wood grain and its high light resistance keeps the color of furniture unchanged. Ultraviolet rays from sunlight decompose lignin and damage the cell structure of wood, leading to wood aging. Iron oxide nanopigment can protect wood because of its fine and uniformly distributed particles, which do not scatter light and absorb ultraviolet rays.
Decorative Metal Gates Decorative metal gates are ornamental and functional structures that are commonly used to enhance the aesthetics of properties while providing security and access control. Decorative metal gates are crafted from various metals, including iron, steel, aluminum, and wrought iron, and are designed to complement the architectural style of the surrounding environment. Some common applications for decorative metal gates Residential Entry Gates: These gates serve as a welcoming and elegant entryway to residential properties. They often feature intricate designs, scrollwork, and decorative elements that add curb appeal to homes. Estate and Driveway Gates: Decorative metal gates are frequently used to mark the entrance to larger estates and driveways. They can be customized to match the overall design of the property. Garden and Courtyard Gates: In gardens and courtyards, metal gates provide an aesthetically pleasing means to enclose and protect the space while allowing visibility of the landscaping and outdoor features. Pool Enclosures: Decorative metal gates can be used for pool enclosures, ensuring safety and compliance with local regulations. Their ornate designs can add a touch of elegance to pool areas. Pedestrian Entry Gates: For homes and businesses, pedestrian gates offer controlled access for individuals entering and exiting a property while enhancing security and style. Public Parks and Gardens: Decorative metal gates are used in public parks, botanical gardens, and nature reserves to mark entrances and create visually appealing access points. Historical Sites and Landmarks: To maintain the historical character of buildings and landmarks, ornate metal gates may be used for entrances and access control. Cemeteries and Mausoleums: In cemeteries and mausoleums, decorative metal gates are often used to secure the area and add an element of dignity. Commercial and Institutional Properties: Decorative metal gates are used in various commercial and institutional settings, such as universities, government buildings, and corporate headquarters, to create an attractive and secure entrance. Hotels and Resorts: In the hospitality industry, these gates are used to enhance the visual appeal of resorts and hotels, providing a welcoming atmosphere. Restaurants and Cafes: Many restaurants and cafes utilize decorative metal gates to define outdoor seating areas and provide a sense of privacy while maintaining an open feel. Historic Districts and Residential Communities: In historic districts and upscale residential communities, decorative metal gates are used to maintain a cohesive architectural style. Art Installations: Decorative metal gates can also be featured as art installations in public spaces and art exhibitions.
The 350/450/570YDMQ Double Station rotary die cutting and slitting machine is also known for its stable and reliable performance, making it a long-lasting and dependable investment for any business. Its easy-to-operate design also allows for minimal maintenance, reducing downtime and increasing overall efficiency. Choose the 350/450/570YDMQ Double Station rotary die cutting and slitting machine for a comprehensive solution to your labeling needs. Main features: 1:Die cutting station(wall plate) is independent and high precision, different from the traditional bottom roller(wall plate) 2:Die cutting station adopt three roller structures to reduce the dancing of magnetic roller, and realize the stable and high speed running at 150m/min, and it can work for the 40gsm bottom paper, saving the material 3:single and double station is optional 4:can be online and inline with the automatic label production no glue turret rewinding machinery, advantage is no need the material storage rack, saving the space. 5:the unwinding part adopt the asynchronous motor to load the material, more stable than hydraulic or the pneumatic lifter. max unwinding diameter at 1200mm or 6000meters 6:Full servo driven for machine, it can work for both number counting and meter counting. 7:Heating fan can be stable productions at the cold weather, it can be easier for the waste scrapping 8:Scrapping waste can be mini 1mm, saving the material 9:Servo driven can realize the dotted line die cutting 10:Die cutting wall plate at thickness 38mm, can work stable running at high speed 11:Scrapping waste compare with snowball waste or magnetic waste rewinding, it can be realize non stop. Technical parameters: Model: 350YDMQ 450YDMQ 570YDMQ Max Slitting speed: 150m/min 150m/min 150m/min Max. Material Width: 350mm 450mm 570mm Max. Unwind dia: 1200mm 1200mm 1200mm Max. rewind dia: 1200mm 1200mm 1200mm Accuracy rate: ±0.10mm ±0.10mm ±0.10mm Max die cut speed: 150m/min 150m/min 150m/min Voltage: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 9/14KW 9/14KW 9/14KW Dimension : 2710*1530*2500mm(single station) 3600*1530*2500mm(double station) 2710*1630*2500mm(single station) 3600*1630*2500mm(double station) 2710*1750*2500mm(single station) 3600*1750*2500mm(double station) Magnetic size: 60T-150T 90T-198T 90T-198T Die cutting bottom paper: 40-70gsm 40-70gsm 40-70gsm Machine weight: 2100/3000KG 2300/3200KG 2500/3400KG
Cross Flow Cooling Tower Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross Flow Cooling Towers are a type of heat exchange system used in various industrial processes and HVAC (heating, ventilation, and air conditioning) systems to remove excess heat from the surroundings. These towers work on the principle of evaporative cooling, utilizing water and air to transfer heat from a process or a system.Cross flow cooling tower working: The water flows vertically from the top of the tower, and the air flows horizontally through the filler. The air flow is orthogonal to the water flow in the cooling tower. Advantage Compact Design: Cross Flow Cooling Towers have a more compact design compared to other types of cooling towers, making them suitable for installations with limited space or height constraints. Their vertical structure allows for efficient use of space. Energy Efficiency: These cooling towers typically consume less power due to their design and operation. The water distribution system and air movement mechanisms result in lower energy requirements, leading to reduced operational costs. Effective Water Distribution: The fill material inside Cross Flow Cooling Towers ensures even water distribution, maximizing the surface area available for heat exchange between water and air. This helps in achieving better cooling efficiency. Lower Noise Levels: Cross Flow Cooling Towers tend to produce less noise during operation compared to other types, which is advantageous when the cooling towers are located near residential areas or noise-sensitive environments. Easy Maintenance: The design simplicity of Cross Flow Cooling Towers makes them easier to maintain and clean. Access to internal components and fill material is typically more straightforward, simplifying maintenance tasks. Handling Varying Flow Rates: These cooling towers can handle varying water flow rates effectively, making them versatile and adaptable to changing process requirements or external conditions. Good Water Quality: The water exposed to air in the cooling process is less likely to get contaminated with debris, dust, or other impurities. This can help maintain better water quality and reduce the need for frequent water treatment. Improved Water Conservation: Cross Flow Cooling Towers can be designed with features like drift eliminators, which help minimize water loss due to evaporation. This contributes to water conservation efforts and reduces the overall water consumption of the cooling system. Suitable for Warm Climates: Cross Flow Cooling Towers are well-suited for warm climates because of their effective cooling capacity even when the surrounding air temperatures are relatively high.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Iron Oxide Pigments For Ceramic Iron oxide red pigment is mainly introduced into ceramic pigment formula in the form of colorant. Such as brown series and black series in glaze pigment; zirconium iron oxide red pigment in zirconium series pigment; iron oxide red raw material is also widely used in black, coffee, brown series of billet pigment, as well as ceramic glazed tiles and other colorful cement bricks. Therefore, the dosage of iron oxide red pigment in ceramic pigment is very large, and the annual dosage is expected to be more than 10,000 tons. At present, the production methods of iron oxide red pigment used in ceramic pigment are mainly divided into sulfuric acid method and mixed acid method (nitric acid method). Take the thin iron plate as raw material, after processing, we get the red color bright iron oxide red pigment. Generally speaking, the comprehensive index of iron oxide red produced by nitric acid method is better than that of iron oxide red produced by sulfuric acid method. 1. What are the most common types of iron oxide red used in ceramics? Iron oxide red 110, iron oxide red 130, iron oxide red 190 are the most popular, and iron oxide red 180, iron oxide red 120, iron oxide red 160, iron oxide red 140, iron oxide red 101 are also widely used in ceramics. 2ã??How much iron oxide red is used in ceramics? The sales volume in China market is more than 10,000.00kg. 3ã??Which production process is better quality for iron oxide red applied in ceramics? Currently, there are two production processes for synthesizing iron oxide red, sulfuric acid method and mixed acid method, which is also known as nitric acid method. The later ceramic quality is better than the first. 4, iron oxide red coloring ceramics what colors? Iron oxide red used as a ceramic coloring agent, is the formation of ceramic glaze brown series, black series, cobalt iron series glaze, ceramic billet composition of black, coffee, dark brown and other colors of the pigment. The brown series occupies an important position in the ceramic industry. The crystal structure of the brown series is Fe-Cr-Zn-Al and Fe-Cr-Zn, Fe III is red, and the combination with chromium oxide green is golden yellow to black brown.
RB 1530-H water jet plasma CNC cutting machine is high performance heavy duty metal plasma cutting machine, especially suitable for cutting stainless steel and carbon steel with clean cutting edge quality. It adopts servo motor and driving device, and is equipped with water mist jet cutting torch which uses a professional braided tube to wrap the torch cable to prevent the high frequency in the torch cable from interfering with external equipment. Specifications of RB 1530-H water jet plasma CNC cutting machine: 1. FANGLING controller. This cutting machine numerical control system is suitable for all kinds of flame/plasma. high-pressure water jet. laser cutting machines. and is widely used in metal processing. advertising. stone and other industries. The system has a highly reliable design and has the ability to resist plasma interference. lightning strikes. Practical flame/plasma cutting process. during plasma processing. the corner speed control and height controller control are automatically completed; remote operation can be achieved with a wireless remote control. 2. High performance plasma cutting machine power supply. Torch cooling system built inside, which is with high-lift pump and high power radiator to reduce the consumption of torch consumables. Excellent HF arc striking control technology and separate structure of HF controller & power source, which highly reduces HF interference. Gas control separate from the power source: shorter gas circuit, more stable gas pressure with good cutting quality. 3.Plasma torch. REBOUND fine cutting torch Strong perforation ability, good cutting perpendicularity, smooth cut surface. For cutting processes with different currents and metal materials, consumables with good cutting quality are matched. 4. Servo driving system. 5. Automatic Arc Voltage Height Regulator The automatic height adjustment system of the torch controlled by closed-loop PWM is used to keep the height of the plasma CNC cutting machine torch to the steel plate constant during the plasma cutting process. Control the height of the cutting torch during the cutting process by detecting changes in the arc voltage. Ensure cutting quality and work efficiency.
This light gantry CNC plasma cutting machine doesn't have working table, so it can withstand heavy cutting of iron sheet. When we ship this machine, we can dismantle the whole machine, the packing size is only 4 cbm. So this can save a lot of transportation costs. It can be equipped with any plasma power supply, such as China Huayuan, American Hypertherm and so on. Applicable Materials: Sheet and tube of carbon steel, stainless steel, aluminum, copper and other non-ferrous metal . Features of light gantry CNC plasma cutting machine: 1. Two cutting modes optional: plasma plate cutting and tube cutting. 2. Gantry structure, perfect bearing capability. The machinesâ?? body is strong, rigid, high precision, reliable and durable. 3. Adopt well known plasma power USA Hypertherm supply and cutting torch. 4. Cutting edge is small and smooth ,without any drop outs, thickness for metal cutting is up to 30mm. 5. With Arc voltage Auto Height-adjusting Device, arcing success rate over 99% and can protect cutting torch from damage, increase cutting quality. 6. Adopts Imported high-precision Hiwin Linear guide rails, smooth movement, to ensure that the machine tools high-precision. 7. Drive gear and rack ,customized from professional manufacturer, is surface processed by cemented quenching, which can prolong machineâ??s using life. 8. Step and Servo drive system is available, which with features of function detecting ,high running precision, wide speed range and short speed up time. Parameters of light gantry CNC plasma cutting machine: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Working Size 1500mm*3000mm Max Cutting Speed 20000mm/min Cutting Thickness(Plasma)(mm) 1-30mm Power 45A/65A/85A/105A/125A/200A Precision �±0.01mm File output mode USB interface Command Code G code/*.MMG/*.PLT/*.eng Packing type Standard plywood case Table Saw tooth table(Optional Blade table) Weight 1500KG
Industrial Gantry type CNC plasma cutting machine with flame/gas torch is designed for sheet metal and tube fabrication. This industrial plasma cutter has gantry structure with double-driving system, All equipped with reducer transmission mode, more powerful. Its working size can be customized upon requirements. It can be used for cutting carbon steel, stainless steel and non-ferrous metal in any 2D graphics.. Plasma cutting for 0-30mm iron/steel, flame/gas cutting for 10-200mm iron/steel. Features of Industrial Gantry type CNC plasma cutting machine: 1. Two cutting ways optional: plasma cutting and (gas) flame cutting. 2. It can be applied to thick metal materials or non-ferrous metal cutting of enterprises. 0-200mm cutting. 3. Flexible, easy to operate, can moves can be cut, Using USB Flash Drive reading procedure and timely upgrade any time, and do not occupy fixed sites. 4. This machine uses 200A HUAYUAN water-cooled power supply, and its cooling effect is much better than air cooling. 5. STARFIRE control system, the file incision and export automatic correction , real-time tracking detection of plasma power in the process of cutting current. The control system uses the U-disk exchange processing document, easy to operate. English interface and other 5 languages:Russian, Spanish, French, Japanese, Czech, Slovak Parameters of Industrial Gantry type CNC plasma cutting machine: Model RB3000, RB4000 Effective Cutting Width (X axis) 2200mm, 3200mm Effective Cutting Width (Y axis) 6000mm Cross Beam Length 4000mm Longitudinal Rail Length 7500mm Cutting Speed 0-10000mm per minute Plasma power 63A, 120A, 200A Plasma Cutting Thickness 0-30mm Gas/Flame Cutting Thickness 10-200mm Drive Mode Bilateral drive Cutting Mode Gas (flame) /plasma cut metal Cutting Gas Acetylene/Propane Plasma Air Only pressed Air Plasma Air Pressure Max. 0.8Mpa Cutting precision �±0.5mm National standard JB/T10045.3-99 Working Temperature -10�°C-60�°C. Relative Humidity, 0-95%.
Slurry pump accessories flange usually refers to several fixed holes opened around a disk-like metal body for connecting other components. Flanges are widely used in various mechanical equipment and pipeline connections. There are also many types of flanges. Next we talk about the standard system of flanges. my country's national standard system for steel pipe flanges GB. 1. Nominal pressure: 0.25Mpa~42.0Mpa Series 1: PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 (main series) Series 2: PN0.25, PN0.6, PN2.5, PN4.0 Among them, the flange sizes of PN0.25, PN0.6, PN1.0, PN1.6, PN2.5, and PN4.0 belong to the European flange system represented by German flange, and the rest are American flange sizes. The American flange system represented by Lan. In the GB standard, the maximum nominal pressure level belonging to the European flange system is 4Mpa, and the maximum nominal pressure level belonging to the American flange system is 42Mpa. 2. Nominal diameter: 10mm~4000mm 3. Structural form of flange: Integral flange Unit flange threaded flange; Welding flange, butt welding flange; Flat welding flange with neck, socket welding flange with neck, plate flat welding flange: loose sleeve flange, loose sleeve neck flange with butt welding ring, loose sleeve plate flange with butt welding ring, loose sleeve flat welding ring Plate flange, plate over loose flange Flange cover (blind hole flange). 4. Flange sealing surface: flat surface, concave surface, concave and convex surface, tongue and groove surface, ring connection surface If you want to know more about slurry pumps, please call Pansto Pump Industry! Shijiazhuang Pansto Pump Industry is a manufacturer of slurry pumps in Shijiazhuang. It mainly designs, manufactures and sells slurry pumps and accessories. Mainly engaged in mud pumps, submersible pumps, foam pumps, desulfurization pumps and many other series. Single-stage slurry pump, slurry pump diagram, slurry pump curve, slurry pump specifications Slurry pump brand Warman slurry pump ZJ slurry pump ZGB slurry pump AH slurry pump SP slurry pump vertical liquid slurry pump
We are here to be your reliable partners of modified plastics. Engineering plastic is the high-performance plastic that can apply in different industrial areas, the higher mechanical strength and heat resistance of these modified plastics make them an excellent alternation of metal material. Compare to metal parts, engineering plastics are with lots of advantages, such as being weightless, significantly reducing noise, decay resistance, high durability, cold/heat resistance, flame retardant, etc. and are suitable for working in extreme environments. As a professional e engineering plastic supplier/manufacturer, we strive to know the needs and wants of our customers, ANMEI offers different types of engineering plastics - PA6 reinforce, PA66 reinforce, PC/ABS alloy, MABS, TPU FR and PP FR with glass fiber, these engineering plastics are with different performances to adapt to kinds of industries including 5G fiber optic cables, domestic appliances, automobiles, hardware appliances, new energy, clothing, machinery industry, electronics and electrical field. When the right engineered plastic is matched to the right application, the engineering plastic products usage will last longer and the overall performance will be better, making it more competitive in the market. How Could Anmei Engineering Plastics Become Your Choice Anmei, an experienced plastic products engineering company, will customize engineering plastics to meet the product performance or process according to the customer's product and mold structure. Providing customers with engineering plastic services such as consulting, product testing and analysis of engineering plastic material, sample trial production and process guidance. Implement the lean production management model of Japanese companies to reduce hitech plastics engineering production losses. While providing products with material performance comparable to those produced in Europe and the United States, it has a better price advantage. In order to ensure product quality and quality stability between batches, Anmei, a prime engineered plastics corp, uses German production equipment and the technical processes of fortune 500 companies and fully equipped testing laboratories for testing. What are engineering plastics? Engineering plastics are a group of plastic materials that exhibit significantly improved mechanical properties over a wide range of temperatures, loads and times. Especially long-term suitability at temperatures in excess of 90C to at least 150C is considered an important criterion of engineering plastic products. Therefore, all "high temperature" plastics are considered engineering plastics.
Our 20ft standard containers have traveled the world, and as a result, can sometimes look a bit rough with signs of wear and tear. We guarantee that each container is wind and watertight and will serve you well as a great storage solution for many years to come! There are no holes in the structure and the wooden floor is in good condition. The container can be any color and may sometimes still have the logo of the shipping company. For most land-based purposes, like storage solutions, used shipping containers are the best option. Product Features: Durable Construction: Our used wind and watertight 20ft shipping containers are constructed with 14 gauge corrugated steel and have marine-grade plywood flooring, ensuring they can withstand harsh weather conditions and heavy cargo loads. Versatile: Our shipping containers can be used for a variety of purposes, such as storage, transportation, and even housing. Mobility: One of the primary advantages of using a shipping container is its mobility. They can be easily loaded and unloaded, and they can be transported by truck, rail, or ship. Secure: The containers are designed to provide robust security features, keeping your valuable possessions safe and protected. Made of sturdy steel, they are strong enough to resist harsh weather conditions and defend against potential break-ins or vandalism. You can also add lockboxes to further increase the level of security, as they prevent tampering or cutting off the lock. Cost-efficiency: Buying a used shipping container is more cost-effective than building a traditional brick-and-mortar storage or office space. Moreover, using it also offers more long-term savings compared to renting space at a storage facility. Customizable: We can transform a shipping container into a space that meets your specific needs. Whether you need a functional workspace, a comfortable living space, or something in between, we can customize the container to fit your requirements. Depending on your needs, you can add windows, doors, insulation, lighting, HVAC systems, and more. Eco-friendly: Recycling a used shipping container is a sustainable choice that reduces waste and helps to preserve our environment. Ample Space: With a length of 20ft, our used shipping containers are perfect for storing large equipment and bulky items such as furniture, vehicles, and appliances. Learn more here.
Cross Flow Cooling Tower Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross Flow Cooling Towers are a type of heat exchange system used in various industrial processes and HVAC (heating, ventilation, and air conditioning) systems to remove excess heat from the surroundings. These towers work on the principle of evaporative cooling, utilizing water and air to transfer heat from a process or a system.Cross flow cooling tower working: The water flows vertically from the top of the tower, and the air flows horizontally through the filler. The air flow is orthogonal to the water flow in the cooling tower. Advantage Compact Design: Cross Flow Cooling Towers have a more compact design compared to other types of cooling towers, making them suitable for installations with limited space or height constraints. Their vertical structure allows for efficient use of space. Energy Efficiency: These cooling towers typically consume less power due to their design and operation. The water distribution system and air movement mechanisms result in lower energy requirements, leading to reduced operational costs. Effective Water Distribution: The fill material inside Cross Flow Cooling Towers ensures even water distribution, maximizing the surface area available for heat exchange between water and air. This helps in achieving better cooling efficiency. Lower Noise Levels: Cross Flow Cooling Towers tend to produce less noise during operation compared to other types, which is advantageous when the cooling towers are located near residential areas or noise-sensitive environments. Easy Maintenance: The design simplicity of Cross Flow Cooling Towers makes them easier to maintain and clean. Access to internal components and fill material is typically more straightforward, simplifying maintenance tasks. Handling Varying Flow Rates: These cooling towers can handle varying water flow rates effectively, making them versatile and adaptable to changing process requirements or external conditions. Good Water Quality: The water exposed to air in the cooling process is less likely to get contaminated with debris, dust, or other impurities. This can help maintain better water quality and reduce the need for frequent water treatment. Improved Water Conservation: Cross Flow Cooling Towers can be designed with features like drift eliminators, which help minimize water loss due to evaporation. This contributes to water conservation efforts and reduces the overall water consumption of the cooling system. Suitable for Warm Climates: Cross Flow Cooling Towers are well-suited for warm climates because of their effective cooling capacity even when the surrounding air temperatures are relatively high.
Hello everyone, We have been engaged in producing and exporting nuts and seeds for 18 years (2006). We export to European countries such as Italy, Austria and Switzerland, as well as to the Arab world. In Germany we work together with large corporations such as Kaufland, Metro, etc. We still have capacity available. Our passion is the distribution of high-quality, fresh nuts of Eastern European origin. Our nuts come from small farms in Eastern Europe. There the nuts are grown in harmony with nature without irrigation systems, pesticides and fertilizers and harvested by hand. It is important to us to promote and further expand these structures. Even without a seal, our walnuts are of organic quality. Our philosophy lies in meeting our customers' requirements and delivering high quality products. We attach particular importance to reliability, honesty and trust in order to build and maintain long-term relationships with our customers. We offer carefully selected premium products whose quality is constantly ensured from incoming goods to outgoing goods in accordance with the standards of ISO 9001 and ISO 22000. This guarantees the highest quality standards. You will receive quality certificates for our products with corresponding technical specifications and analysis reports. The fruits are harvested directly from private tree owners. Neither fertilizers nor pesticides are used. The nuts are only shelled after your order has been received. In addition to freshness, this guarantees an authentic, mild, nutty taste. We have different walnut categories: 1/2 - walnut kernels half 1/4 - quarter 1/8 - fraction 6-8 mm Breakage - 4-6 mm Filling - ready-made mixture for different confectionery (contains nuts, sugar, cinnamon, etc.). This filling can be made according to your wishes and recipe. The minimum order quantity with us is one pallet - 540 kg. However, you can put together the palette from several products. E.g.: 100 kg nuts, 200 kg kernels, 200 kg seeds etc. The nuts are packed in small boxes with air-permeable film (5kg per unit). This means that the nuts remain fresh during transport and storage at the customer's premises until the goods are used. We offer free advice and would be happy to create an individual offer for you. Delivery and VAT 7% are included in the price. The price can be negotiated. We are very flexible and look forward to finding a solution for you. Take a look at our other advertisements and tell us what kind of product you are looking for, we have over 100 products in stock!
Titanium tubes come in various grades, each with specific properties suited to different applications. Titanium alloys are known for their excellent strength-to-weight ratio, corrosion resistance, and biocompatibility, making them ideal for a wide range of industries, including aerospace, medical, chemical processing, and marine. Here are some common grades of titanium tubes: Grade 1 (UNS R50250): Commercially pure titanium with excellent corrosion resistance, high ductility, and good weldability. Grade 1 titanium tubes are often used in applications where corrosion resistance and formability are essential, such as chemical processing equipment, heat exchangers, and marine components. Grade 2 (UNS R50400): Commercially pure titanium with slightly higher oxygen content than Grade 1, resulting in improved formability and moderate strength. Grade 2 titanium tubes are widely used in aerospace, marine, and medical applications, as well as in heat exchangers, piping systems, and condensers. Grade 5 (Ti-6Al-4V, UNS R56400): An alpha-beta titanium alloy containing 6% aluminum and 4% vanadium, offering excellent strength, toughness, and corrosion resistance. Grade 5 titanium tubes are commonly used in aerospace, automotive, and biomedical applications, as well as in high-performance sports equipment and marine components. Grade 9 (Ti-3Al-2.5V, UNS R56320): An alpha-beta titanium alloy containing 3% aluminum and 2.5% vanadium, providing a good balance of strength, weldability, and corrosion resistance. Grade 9 titanium tubes are often used in aerospace structures, bicycle frames, and marine components where high strength and corrosion resistance are required. Grade 12 (Ti-0.3-Mo-0.8Ni, UNS R53400): An alpha-beta titanium alloy containing 0.3% molybdenum and 0.8% nickel, offering excellent corrosion resistance in oxidizing and reducing environments. Grade 12 titanium tubes are commonly used in chemical processing, desalination plants, and marine applications where resistance to chlorides and seawater is critical. Grade 23 (Ti-6Al-4V ELI, UNS R56401): An extra-low interstitial version of Grade 5 titanium with enhanced fracture toughness and biocompatibility, suitable for medical implants and surgical instruments. These are some of the commonly used grades of titanium tubes. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, temperature requirements, and cost considerations. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
BRIGGS & STRATTON 10KW HOME STANDBY GENERATOR (STEEL) Price:$1,356.00 SKU:40375 Brand:Briggs & Stratton Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 10 kW Fully Automatic Standby Generator Automatically starts when utility power is lost Advance Power Management (Transfer Switch Sold Separately) Combine with ATS to manage up to two 3-Ton AC units 570cc Briggs & Stratton V-Twin Commercial Grade Vanguard Engine Provides years of long lasting, reliable standby power Streamlined, Space Saving Design Sleek, compact profile blends in next to central AC unit Flexible Placement (Please Verify Local Building Codes) Tested against tough National Fire Protection Agency standards Can be placed as close as 18â?? from structure Front Air Ventilation Pushes engine exhaust out the front, away from the home Galvanneal Steel Enclosure Automotive rust proofing paint process reduces corrosion Auto Fuel Shutoff & Easier Maintenance Provides added safety during an emergency More service access & user-friendly control panel Includes Synthetic Oil & Battery Charger Industry Leading 5-Year Warranty Parts, labor & travel covered for 5-Years Specifications Engine Engine Brand Briggs and Stratton Vanguard Starting System 12v Auto Start CC 570 CC Consumer Engine Warranty 5 Years Engine RPM 3600 RPM Low Oil Alert/Shutdown Yes Product Specs Voltage 120/240 Single-Phase Frequency 60 Hertz Surge Watts 10000 Watts Rated Watts 10000 Watts Fuel Type LP/Natural Gas NG Power Capacity 9000 Watts LP Power Capacity 10000 Watts NG Fuel Consumption @ 50% Load 111 ft�³/hr NG Fuel Consumption @ 100% Load 169 ft�³/hr LP Fuel Consumption @ 50% Load 1.18 gallons/hr LP Fuel Consumption @ 100% Load 1.82 gallons/hr Rated Amps 42 Amps Decibel Rating @ 7m ? 75 dbA Transfer Switch Automatic (Not Included) Enclosure Steel Battery Not Included (540 CCA) A/C Ton Rating 3-Tons Mounting Pad Steel (Included) Cooling System Air Cooled UL Listed Yes Grade Type Emergency Overview Made in USA Yes Weight 272 Pounds Product Style Standby Generator Product Length 28 Inches Product Width 24.4 Inches Product Height 35.1 Inches Consumer Warranty 5 Years UPC 011675403751
Weightless feeder is a kind of high-precision continuous and quantitative feeding equipment. It not only has the advantages of high precision of static weighing, but also has the function of continuous automatic quantitative control of dynamic weighing. It integrates the advantages of accuracy, stability and speed, and is the first choice equipment to achieve accurate feeding, improve efficiency and save investment in the production of batching process. Features: Self-cleaning twin screw; High corrosion and IP protection level; Automatic double shift transmission box; Lean design double arch breaking mechanism; Stainless steel hoop structure; Microchip controller for weightlessness scale Dynamic measurement accuracy 0.2%-0.5% Applicable material: Suitable for poor fluidity, sticky, or moisture sensitive powder. Twin-screw weight loss scale is a kind of high-precision continuous and quantitative feeding equipment. It not only has the advantages of high-precision static weighing, but also has the function of continuous automatic quantitative control of dynamic weighing. It integrates the advantages of accuracy, stability and speed, and is the first choice equipment to achieve accurate feeding, improve efficiency and save investment in the production of batching process. Double screw weight loss scale adopts double screw, screw non-stick material, with self-cleaning function, more uniform material flow. It can achieve high precision control of different feeding ranges and materials of different properties. Working principle This series of twin-screw weight loss scale uses the form of meshing twin-screw and blade twin-screw to push the material out through the two screws, and the above of the screw is equipped with horizontal and vertical stirring, which can improve the filling rate of the screw and avoid the occurrence of material bridge Scope of application It is used for powder, granule, glass fiber materials, and powder raw materials with poor fluidity and easy adhesion Core advantage High precision batching Based on rich industry experience and professional knowledge in batching system design, the use of independent research and development control instrument, can be multi-stage feeding, high speed, high precision batching, can achieve the precise control of the material drop and timing, the highest accuracy of +0.1g. High intelligent control - The human-machine interface is clear and easy to understand, and the control system can automatically calculate and display the weight of the material in the storage bin, the operation status of automatic weighing, instantaneous weight, cumulative weight and other information.
Auto Parts Air Filter Ca-808A Ca-808b P181080 P127315 1780112730 1124151530, Air Filter, Auto Filter Air Filter Supplier Ruian Hanfu Locomotive Parts Co., Ltd. Price $2.00 Availability In Stock Mini Order: 100 Model NO. 1142141080 1142150670 1142151080 1142151081 Classification Air Filter Tangxia Town Ruiâ?²an City Transport Package Carton or as Your Reference Specification TOTAL H: 343 H: 331 OD: 230 ID: 147 Trademark CHANJOR Origin China Production Capacity 200, 000/Month Type: Air Filter Material: Paper Core Structure: Filter Element/Assy Filtration Grade: Hepa Filter Application: Air Pattern: Dry The filter CA-808A CA-808B P181080 , we use the best paper, rubber, and also use the best packing. When we produce these filters , we test each one so don't worry about the quality. We can produce this item filter for 200,000/month. Our factory estabilished in 2010, we specialized in producing a serises of filters. With our continuous effors and our customers' supports, these produces sold well in Southesat, Asia, Afria and so on. We are eager to work together with all our customers on mutual benefits towards greater prospects. Auto Parts Air Filter Ca-808A Ca-808b P181080 P127315 1780112730 1124151530 Auto Parts Air Filter Ca-808A Ca-808b P181080 P127315 1780112730 1124151530 FAQ1. Are you a factory? A: Yes, we are factory since 2010 and We have10years experience in foreign trade. 2. Which countries do you export to? A: We are exporting to more than 50 countries, for example America, Australia, Germany, Brazil, Russia, Turkey, Dubai, India etc. 3. Could you do our brand? A: Yes, just need your authorization. 4. What is your terms of delivery? A: EXW, FOB, CFR, CIF. 5. If your products bring us complaints, how will you deal with it? A: If large quality, we will arrange shipment return and pay your lose. B: If it big loses, like engine broken, we will pay all your cost which it brings you by cash or products. 6. What are you after sale service? A: Offer product training, usually tells the difference in our products. B: Offer technical support to help sales. C: Refer to NO.4 7. How do you guarantee the quality of the product? A: Our factory has established a comprehensive testing mechanism, and every step of the production has undergone a strict quality inspection.
Product overview: CRM-8501 is an organic polymer compound of cation quaternary ammonium salt type. The advanced technology and raw materials are from developed countries. The characteristics are as below: The effective concentration is 10 times or 15 times higher than common retention acid liquid. It has better fluidity, easy & fast dissolution, no caking or granularity phenomenon. It has very good adaptability and can adapt to kinds of papers of kinds of pulps. Product function mechanism during the paper-making process 1. To neutralize the paper surface charge. The pulp and filler are of negative charges and the charges can be neutralized and decreased by adding into CRM-8501so as to form micro-floc when the potential towards zero. 2. To be inlaying effect. The electrostatic of positive charge on CRM-8501 surface can attract pulps and fillers whose surface is of negative charges. 3. To be bridging effect. Higher molecular weight and longer enough molecular chain will result in bridging between fines and fillers so as to form micro-floc. 4. The micro-floc of fines and fillers will decrease the porous structure blockages of wet paper layers and increase the permeability properties of papers. Appearance: Milky white liquid Solids content: 38�±1% pH value: 3-6 Viscosity : â?¤ 500 mPa.s Performance characteristics 1. To increase the retention rate of paper fines and fillers dramatically so as to decrease the pulp consuming qty. 2. To decrease the concentration of whitewater, wastage of fines&fillers and the whitewater pollution. 3. To increase the permeability properties of pulp and the wet strength of paper. To increase the production speed of paper-making machines so as to increase the production. 4. Without any pungent odor. And has better fluidity under lower temperature Usage tips Dosage: Around 0.3 kg to 0.8 kg per mt paper ( adjust as per different pulps and production processes) To add CRM-8501 evenly and slowly into dilution tank with ready water. And add additional water till requested qty ( the dilution concentration of CRM-8501 is usually 1-3). To stir the diluted concentration for around 20 to 30 minutes before entering into paper-making system via flow pump. Packing and storage The package is 200 Liters plastic drum or 1000 Liters IBC drums or as per clients' requests. It should be stored between -5C-30C. The shelf life time is 3 months. To wave the CRM-8501 before dilution and the diluted liquid can be stored 3 days at most.
