Siemens Avanto 1.5T MRI Year: 2006 Software Version: syngo MR B19 Gradient: Q Engine Channels: 18 Coils: Large Shoulder Array, Small LP Loop, Small CP Flex, Large CP Flex , Peripheral Angio Matrix, Head Matrix, Neck Matrix, Body Matrix, Spine Matrix CP Extremity MR Coil , Small Shoulder Array,
Toshiba Vantage Titan 1.5T Year: 2010 16 Channel Gradient strength: 30 Gradient Model: M-Power Compressor Year: 2019 (Sumitomo F70L) Coils: ***Head, Body, Shoulder, Knee/foot, Neck, Wrist, Spine, 70 flex, 150 flex, Rectangular flex** Software version console: 2.31 R006
Philips Ingenia 3T MRI Year: 2014 Gradient Model: Omega/HP Magnet Model: WA RF Amplifier: C787 Coils: T/R Knee 16, dS Foot/Ankle 8ch, Small Extr 8ch, dS Head/Neck, dS Head, dS Anterior, Shoulder, dS Breast 16chdS Wrist 8ch, dS Anterior, dS Base, Dstream Interface, Console: Z420 Software version console: R5.3
Hitachi Airis Vento LT MRI Year: 2012 Coils: Body Coil L, Body Coil M, Joint Coil L, Joint Coil M, Head Coil, Knee Coil Available: Next month
GE HDxt 1.5T MRI Upgraded to 23x in 2014 Location: Australia (EX3120) Software Version: 23x No of RX Channels: 8 Coils: 8CH Brain, 9CH Knee, 8Ch NV Array, 8Ch Cardiac, 8 Ch Body, 8Ch Shoulder, 8CH CTL, HR Wrist
TOSHIBA Vantage 1.5T with Oxford Magnet Year: 2003 Quench From P2 to P3 Updated Coils: Shoulder Array Coil GP Flex Coil Breast Coil QD Coil for Knee QD Head/ NV Speeder QD Torso Speeder QD CTL Spine Array Coil
Hitachi Airis Mate 0.2 T MRI Year: 2005 SV: V4.5U Coils: Body/ Round coil/ Wrist/ Knee/ Head
*Siemens Magnetom C (c2 type )* Yom: 2011 Coils: Extremity L, Extremity S, Head array, Neck L, Neck M, Shoulder
Philips Ingenia CX 1.5T Power MRI system Original MOD: 2005 (Intera Pulsar) Software version: R5.4 Upgraded from Achieva to dstream in 2018yr Working in Japan
Toshiba Vantage Elan 1.5T Year:2017 16 Channel Gradient strength & Model: 33/125 /DX Magnet Year& Model: 2017/MSM-TC-150AM-F Compressor Year& Model: 2016/F-70 Compressor running hours: 53312h Cold head model& year: RDK-408D3/2015 Coils: BODY, Octave Head, Breast, Spine16ch Flex, 16ch Flex Large, Software version console: V4.0-SP1053
Esaote G-Scan Brio 0.25T 2015 Expected availability: In Stock Condition: Complete and fully functional Field strength: 0.25T Coils: Flex coil, Shoulder coil, Cervical coil, Lumbar coil, Lumbar coil, Cervical coilShoulder coil, Knee coil, Hand/Wrist coil, Ankle coil, SW version: 3.1A
The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. Hitachi's X-MET8000 handheld X-ray fluorescence (HHXRF) analyzers provides rapid and accurate chemistry of a wide array of materials such as solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc. The X-MET8000 is practical, rugged and easy to use to deliver results you can trust. The light and ergonomic design of the X-MET8000 ensures it is comfortable to use on a daily basis. The nose is designed to test material inside bends and corners. Using Hitachi's HEROTM window, which is heat resistant, the X-MET8000 can accurately analyze alloys up to 400 C. The Hitachi XMET-8000 comes in 3 configuration options: XMET800 Smart, XMET8000 Optimum and X-MET8000 Expert. The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. The X-MET 8000 Smart is the latest portable XRF device from Hitachi, a company specializing in XRF analyzers that provides chemical analysis in the field. This model with SDD detector can perform chemical analysis of elements in the range of K (19) U (92) in less than 5 seconds in the periodic table. The X-ray fluorescence spectrometer can be used in field conditions without requiring any sample preparation thanks to its IP 54 standard and battery usage. Thanks to the specially developed thick film on the front of the device, even the sharp parts can be easily measured. The device is unique with its library of 1600 alloy standards and small compact design. It has the ability to report in Excel or PDF format. The device has the ability to store over 100,000 analyzes in memory and to report in either Excel or custom PDF format. Portable XRF devices are widely used in various fields such as alloy (metallurgy) applications, recycling, mining applications, archeology and restoration, jewelery, NDT and PMI inspections.
The X-MET8000 is practical, rugged and easy to use to deliver results you can trust. The light and ergonomic design of the X-MET8000 ensures it is comfortable to use on a daily basis. The nose is designed to test material inside bends and corners. Using Hitachi HEROTM window, which is heat resistant, the X-MET8000 can accurately analyze alloys up to 400 C. The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. The X-MET series of handheld X-ray fluorescence (XRF) analysers are flexible and easy-to-use for elemental analysis within production environments, manufacturing plants and scrap metals processing. The optimised combination of a high performance X-ray tube & large area silicon-drift detector (SDD) delivers the performance required for the most demanding PMI and scrap metals applications. The Hitachi XMET-8000 comes in 3 configuration options: XMET800 Smart, XMET8000 Optimum and X-MET8000 Expert. X-MET 8000 Optimum can provide results on site in seconds, depending on the application. Phenomenal reliability and speed, with no requirement to return for lab assessment, mean optimum productivity, lower costs and an all-important edge over your competitors. Data can be stored on the analyzer, on a USB flash drive, or through our app and cloud service for immediate sharing. Designed to be portable, simple to use and with a with a 10-12 hour battery life, the X-MET8000 Optimum Geo is able to withstand the harshest environments and weather conditions. It also offers analysis results in seconds with real time data sharing for fast decision making. The Boost technology delivers low levels of detection while the integrated GPS enables users to combine geolocation data with analyses results for flawless site mapping. Key Features: X-ray tube : 40kV or 50kV X-ray tube filters: Single Detector: Large area SDD Max. sample temperature : 100�ºC or 400�ºC with HEROâ?¢ heat resistant window (optional) IP54 rating Protection against detector window damage : Optional window shield Calibrations : Standardless (includes light elements analysis) Integrated camera (Optional) Small-spot collimator (Optional) 6-position filter wheel for the optimised analysis of all elements from Mg to U
The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. Hitachiâ??s X-MET8000 handheld X-ray fluorescence (HHXRF) analyzers provides rapid and accurate chemistry of a wide array of materials such as solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc. The X-MET8000 offers the best of both worlds with versatile fundamental parameters (FP) method and empirical calibration (traceable to certified reference materials) for superior precision and accuracy. Itâ??s great for the analysis of light element (Mg to S) for tight control of components and systems. Low limits of detection deliver accurate trace/tramp elements analysis and grade identification. The X-MET8000 Expert Geo is a handheld XRF analyser for geochemistry applications including fast on-site environmental screening, mining exploration, planning and grade control. Easy to use and designed to withstand the harshest environments and weather conditions, the X-MET8000 Expert Geo offers results in seconds with real time data sharing for fast decision making.The combination of our large area silicon-drift detector (SDD) and revolutionary superfast detector electronics BOOST technology provides up to 10 times the sensitivity of other handheld XRF models, delivering the low limits of detection required to measure critical elements accurately time after time. X-MET 8000 Expert can provide results on site in seconds, depending on the application. Phenomenal reliability and speed, with no requirement to return for lab assessment, mean optimum productivity, lower costs and an all-important edge over your competitors. Data can be stored on the analyzer, on a USB flash drive, or through our app and cloud service for immediate sharing. The X-MET8000 Expert is a handheld X-ray fluorescence (XRF) analyzer that delivers ultimate on-site alloy analysis for safety critical applications. It's light and ergonomic, making it comfortable for daily use. Its nose design is optimised to test material inside bends and corners. And thanks to our unique HERO (heat resistant) window, you can analyse alloys at up to 400�ºC accurately. With X-MET8000 Expert you can minimise laboratory testing and reduce costs whilst ensuring safety and compliance.
The Vanta handheld XRF analyzer is one the most advanced handheld X-ray fluorescence (XRF) devices and provides rapid, accurate element analysis and alloy identification to customers who demand laboratory-quality results in the field, it provides fast results in a diverse range of applications. Vanta handheld XRF analyzers are built to be tough. Their rugged, durable design makes them resistant to damage in challenging industrial environments for greater uptime and a lower cost of ownership. With intuitive navigation and configurable software, the Vanta series are easy to use with minimal training for high throughput and a fast return on investment. Featuring innovative and proprietary Axon technology, Vanta analyzers give you accurate results and help boost productivity no matter the environment or working conditions. The Olympus Vanta C Series XRF Analyzer is a handheld X-ray flourescence tester that fuses speed, a wide elemental range and and low limits of detection. Vanta C Series models are equipped with a silicon drift detector and a 40 kV X-ray tube with a rhodium (Rh) anode. Ideal for scrap sorting, PMI, geochemistry, mining, jewelry ID, soil analysis and an array of other applications, the Vanta C Series adheres to IP65 and MIL-STD 810G standards. Features include SmartSort, which shortens or lengthens test time based on material, and real-time grade matching notifications. Kit contents Vanta C series XRF 2 batteries and charger Docking station and accessories Required skills & qualifications Proof of radiation safety training and X-ray safety training Written approval from your radiation safety officer Proven experience with similar equipment (signed off by supervisor) Full liability insurance Additional considerations User will need to provide completed radiation risk assessment User must not be pregnant/breastfeeding while using this equipment Equipment must be used in controlled lab Only to be used by people named in hire agreement Needs secure storage when not in use Further training and support can be provided upon request
The Vanta analyzer is our most advanced handheld X-ray fluorescence (XRF) device and provides rapid, accurate element analysis and alloy identification to customers who demand laboratory-quality results in the field. Vanta handheld XRF analyzers are built to be tough. Their rugged and durable design makes them resistant to damage for greater uptime and a lower cost of ownership. The Vanta Element XRF analyzer series has the performance and portability you need for fast scrap sorting or metal ID. Both the Vanta Element and Vanta Element-S models offer fast grade identification with clear on-screen grade comparisons for easy operation when testing metals. The new Vanta Element-S handheld X-ray fluorescence (XRF) analyzer delivers fast light element detection at an affordable price, joining a family of cost-effective, entry-level Vanta Element XRF instruments. The S model is equipped with a silicon drift detector (SDD) to analyze light elements like magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S) and phosphorus (P) in alloys. Ideal for scrap recycling, basic PMI, metal manufacturing and precious metals, the Vanta Element-S effectively measures ferrous metals, aluminum, copper, stainless steel, nickel and gold karats. The analyzer offers clear on-screen grade ID and comparison for the light elements Mg, Al and Si in seconds. Its SDD detector can distinguish similar alloy grades like 303 stainless steel from 304, and aluminum 6061 or 6063 from 1100. Vanta Element-S analyzers come with the essential features the Vanta series is known for: speed, reliability, ruggedness, connectivity and smartphone-like ease of use. Weighing a slim 2.9 lb. (1.32 kg), the analyzer is up to the challenge of all-day testing for alloy and metal analysis. Powered by Olympus proven Axon Technology, the S model brings the same high-count rate and stability as the rest of the Vanta series for fast results and ROI.
Olympus Nortec 600D is a compact, durable, high-performance digital circuitry and eddy current flaw detector. Designed to generate highly visible and contrasting eddy current signals in all kinds of lighting conditions displayed on a vivid 5.7-inch VGA screen. The NORTEC 600 flaw detectorâ??s redesigned interface takes the intuitive, knob-operated navigation of its predecessors and merges it with the efficient direct-access keys and simple menu structure of other popular Olympus instruments. Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit the new NORTEC 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition. The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator. Key Features: Designed to meet the requirements of IP66. EN-15548 compliant. Long battery life (up to 10 hours). Bright, 5.7 inch (14,5 cm) VGA display. Full-screen option in any display mode. Improved filters for rotary scanner mode. Intuitive interface with Application Selection presets. All-settings configuration page. 10 Hz to 12 MHz frequency capacity. Automatic internal balancing (BNC connector). Up to two real-time readings. True automatic mixing. Storage capacity of up to 500 files (program and data). On-board file preview.
Olympus, a world leader in nondestructive testing technologies, is pleased to introduce the EPOCH 650 digital ultrasonic flaw detector that combines industry-leading conventional ultrasonic flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 is a continuation of the popular EPOCH 600 flaw detector (launched in 2010) and provides excellent performance and usability for a wide variety of applications. Its intuitive user interface is appropriate for both novice and experienced users, and its portability and rugged ergonomic design allow convenient operation in nearly any inspection environment. Available in two hardware configurations, the compact EPOCH 650 offers the choice to adjust parameters with a knob or with a navigation area on the keypad. The large, color transflective VGA display is complemented by a full screen A-scan mode, providing a vivid A-scan representation in both low light and bright sunlight conditions. The EPOCH 650 patented digital High Dynamic Range receiver meets the requirements of EN12668-1:2010, and the instrument allows a full range of standard and optional flaw detection features. Key standard flaw detection features include 400V PerfectSquare tunable square wave pulser, up to 30 digital filters for enhanced signal-to-noise ratio, flexible reporting capabilities direct to removable memory, dynamic DAC/TCG, onboard DGS/AVG, AWS D.1.1 / D1.5 weld rating software, and Echo-to-Echo measurements with gate tracking. Optional application-specific software programs include an Interface tracking gate, Backwall Echo Attenuator (BEA), API 5UE, and Waveform Averaging. Economical Size, Quality Performance The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of EN12668â??1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application. The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use.
The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of EN126681 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application. The EPOCH 650 design is focused on providing a very high level of flaw detection with the simplicity of a basic instrument. The EPOCH 650 is designed to be ergonomic, intuitive, and practical for both experienced and novice ultrasonic inspectors. Designed for All Inspection Environments The EPOCH 650 is designed for use in nearly any inspection environment, from bench top testing in a laboratory to extreme outdoor and hazardous conditions. Designed for IP rating in either knob (IP66) or navigation pad (IP67) configurations, and tested to very high environmental and reliability standards, the EPOCH 650 allows users in any inspection environment to feel confident in both the performance and durability of the instrument. Key Features: Designed to meet the requirements of ISO 22232-1 PerfectSquareTM tunable square wave pulser Full screen A-scan mode Digital high dynamic range receiver Thirty digital filters for enhanced signal-to-noise ratio 2kHz PRF for rapid scanning Knob or navigation pad adjustment configurations Large, full VGA sunlight readable display 15 hours of battery life Standard dynamic DAC/TCG and onboard DGS/AVG Multiple on-board report formats MicroSD memory card for data transfers Optional Corrosion Module software with Encoded B-scan USB On-The-Go (OTG) for PC communication Alarm and VGA outputs Optional analog output Simple and Comfortable Operation The EPOCH 650 design is focused on providing a very high level of flaw detection with the simplicity of a basic instrument. The EPOCH 650 is designed to be ergonomic, intuitive, and practical for both experienced and novice ultrasonic inspectors.
This just a small connector,do not have any software. Its not a scanner too. High quality OEM molds insure stable sockets that connect every time and dont wobble. 6- and 9-pin Adapter forTruck High-quality materials give the cable superior flexibility and durability.
