Product Introduction: Grinding stone for Gravure Copper grinding machine are being mounted by hot-melt glue, is mainly used for rough-grinding and finishing grinding which can be used in various of rotogravure cylinder making copper polishing machine. Specifications: 200x50x50mm; 200x100x50mm Grits: 800#, 1000#, 2500#, 3000#, 6000#. Product Advantage: 1. Gravure Grinding stones can be designed according to client's requirement 2.Engravure cylinder surface with high precision after polishing 3.Copper Grinding Stone Less loss, economy 4. Copper polishing stone with fine structure, high grinding precision, high efficiency 5. Rotogravure copper grinding stone hardness can be adjusted according to needs.
Product Introduction Double tank Copper plating machine for Gravure electroplating for Rotogravure cylinder is designed with reference to the world's most advanced electroplating process, During electroplating, cylinder achieves full linear speed control.gravure printing cylinder copper plating machine it is widely used in Rotogravure printing cylinder industry. Engravured cylinder manufacturers the entire electroplating process can be set to automatic and fully automatic control. Product Advantage: Double electroplating tank 1. It occupies less space, saves space, and greatly improves site utilization! 2. Sharing one liquid storage tank, a very small amount of liquid storage can be used. The heating tube, temperature measurement, and liquid level gauge are controlled by only one system, which reduces operating costs, is simpler, and is more reliable; 3. The two upper tanks share a lower liquid storage tank, and only the composition of the plating liquid in one liquid storage tank is ensured. For example: sharing an additive system, the accumulated electroplating ampere hours of the two upper tanks are used as the basis for the working period of the additive pump and the amount of additives; 4. The transmission and liquid feeding systems of the two upper tanks operate independently of each other. Even if one upper tank has a fault and needs to be dealt with, the other upper tank can still continue to operate.
Beauty-Loving Students prefer PL Pulse light hair removal device, Hair Removal and skin rejuvenation,Keep white the times! Enjoy the cleansing effect of beauty salons at Home. Laser destroys hair follicles to achieve lasting hair removal. Fast Speed, Good effect, high safety, no side effects, shrinkage pore, moisturize skin and other advantages. 1. Hair Root abscissior The Hairy roots shrank and fall off gradually when heated. 2.Direct hair follicle Photons enter the Hair Follicle when the light shines. 3.Inhibitory Growth Non- Black Spot residue inhibits Regeneration and does not rebound.
Product Introduction: Roughness tester for gravure cylinder is a high-precision surface finish testing instrument that can measure the surface roughness of a variety of machined parts, including flat surfaces, inclined surfaces, outer cylindrical surfaces, curved surfaces, small holes, grooves and axles, etc. Product Advantage: *Electromechanical integration design, small volume, light weight, easy to use; *Residual quantity icon, prompting the user to charge; *Continuous working time: more than 20 hours. *Real-time clock settings and display, convenient data recording and storage. *Reliable control motor to go dead circuit and software design *Gravure cylinder roughness tester with High performance.
The roller plug processing special machine is easy to operate with high precision and more efficiency. The Electric Chuck can automatically clamp the blank of the plug head. Two knives can process the cone hole and the outer circle surface at the same time to improve the production efficiency. The touch screen can display the cross section style of the plug hole and fill in the blank size. The whole closed structure has clean surrounding environment.
Features Conform to standards ISO2872 & ISO2874 Based on the stable Windows OS and support automatic remote-control interface, the operator can accurately complete the tilting and swing test by entering simple values. The operation interface is mainly based on the real-time display of data curve, it also can display the test parameters, system status, and test progress. High-precision AD conversion, preamplifier, data processing and automatic test result output, digital control to ensure test accuracy and sta The strength test, fixed value test and stacking test can be realized on the same platform. https://www.chamber-testing.com/ Technical Specifications Measuring range: 0 ~ 100kN (can also be customized according to requirements). Accuracy: 2%. Platen area: 1200 Ã?? 1200mm2 (extension plate can be added). Working stroke: 0 ~1500mm (can also be customized according to requirements). Pressing speed: 10mm / min (can also be set arbitrarily). Return speed: 0 ~120mm / min (can also be set arbitrarily). Foundation requirements: smooth cement floor. Equipment weight: about 1500kg. Working environment: 0 ~ 40 , humidity 80% (non-condensing). Power: three-phase AC 380V 50Hz;
Product Detail: The fully automatic plating line is improved on the basis of the traditional plating line. It realizes the centralized PLC or microcomputer program control in the whole line, which has high working efficiency, fewer operators and less floor space, stable quality, long service life and convenient maintenance. Product Characteristics: 1.Scientific design, reasonable structure: this machine combines designersâ?? more than ten years of design and use experience, so that the production line fully reflects the companys product concept of Economic, efficient, practical in the design and structure. 2.Machine Material SelectionChrome Machine: Storage tank, working tank are made of TA2 material with a long life and no leakage. Anode uses two forms of hanging and rotating column. And it is automatic positioning. Anode can adopt platinum titanium anode and lead-antimony alloys. The liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage.Copper Machine: ANODE can adopt two forms of hanging column and rotating column; its automatic positioning; the new type titanium filter improves the products filtering and sealing effects; titanium (TA2) heating pipe and temperature control system; Japanese Yiweiqi additive pump has high precision and long service life; the storage tank is supported by stiffening rib and sealed by fixing edge. 3.The electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life. The operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
Application: Centrifugally cast stainless steel roll are of good heat, corrosion, wear resistant properties, working at high temperature environment on average: 800 to 1, 200¡ã c, which are used in the steel mills, like continuous annealing line, continuous galvanizing line. Process of centrifugally cast stainless steel roll: centrifugal casting for barrel/tube, forging for journal/shaft, static /investment or sand casting for cone/turnings, welding and machining and grinding. Material of centrifugally cast stainless steel roll: high nickel and high chrome heat resistant alloys, cobalt base alloys, like hu, ht, hk, hp, hw, 24/24nbtizr, 50cr/50ni (2.4813), 1.4865, 1.4849, 1.4848, 1.4410, 1.4059, 1.4841, 1.4845, 1.4852, 2.4879 or as per customer¡¡¥s requirements. Wooden package
Product Introduction Apanese Omron inverter, which guarantees the current stability and the electric appliance service life. Electroplating Alkaline copper plating machine the operation adopts the programmable controller, which makes the Copper Engraved cylinder machinery achieve automation on feeding the liquid, anode automatic positioning and other operations. Product Advantage Product Advantage: A. Alkaline copper plating machine for Engravure printing cylinder with Fully PLC control. Easy operation. Easy maintenance. B. Cylinder making machinery Production Line Save 70% manpower digital standard with stable Copper Alkaline Electroplating. C. Electroplating Alkaline plating machine with advanced plating technology, lower working voltage and lower power consume. D. Engraving cylinder making Alkaline copper plating tank with servo motor, high effciency. Working Capacity Model L1300 L1500 L1700 L2300 L2500 Length of cylinder 400-1300 400-1500 400-1700 400-2300 400-2500 Dia. of cylinder 90-350 90-400 90-400 90-450 90-500
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Titanium Threaded Rod/Bar Threaded titanium rods are also called titanium threaded bars, which are made by thread rolling or machining titanium rods directly. Threaded titanium rods have the characteristics of low density, high specific strength, good corrosion resistance, low thermal conductivity, non-toxic and non magnetic properties. Titanium threaded bars and rods are widely used in various industries such as electroplating, electrolysis, chemical engineering, medical equipment, aquaculture, electronic hardware, plastics, etc. If you want to customize titanium threaded bar or want to know the threaded titanium rod price, please do not hesitate to contact the Changsheng titanium alloy bar supplier.
The 600i Jaw Crusher continues Tesabs focus on quality, durability, and productivity. With heavy duty cheekplate design, 40â?³ wide jaw and user-friendly control panel with excellent machine diagnostics, the Tesab 600i provides contractors with a highly portable option while meeting all production expectations. At 2.5 metres wide, its ideal for applications that require a high degree of mobility. CAPACITYENGINE 225 HP (167 KW) CAPACITYWEIGHT 34,600KG C/W MAGNET AND DIRT BELT CAPACITYCRUSHING CHAMBER 1016MM X 610MM CAPACITYPRODUCTION RATE* UP TO 225 TPH DOWNLOAD FULL TECH SPEC
Atmospheric Plasma Cleaning System chain conveyor Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove surface oil, fingerprints and other organic contamination horizontally, 3. Board walking speed 2~5 meters/minute 4. Double-sided processing is possible, and equipment can be customized according to production capacity 5. Processing under atmospheric pressure, no special gas is required, and installation and use are simple Product Specifications: 1 Dimensions L*W*H:1200*1150*1150 - 1500mm 2 Power supply Single-phase 220V, 50/60HZ, 12A 3 Conveying method Roller conveyor, chain conveyor, belt conveyor 4 Working environment Temperature: -10~40, relative humidity: 50%~93% (non-condensing) 5 Plasma generator 500-700W adjustable; optional 700-1200W (high power version) High power version is suitable for 50mm and 70mm spray guns @25-40KHz 6 Working gas Water-free and oil-free compressed air; optional argon, nitrogen, etc. 7 Effective processing Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional 8 Rotating spray gun Processing width diameter: 50mm, optional 70, 30, 20mm 9 Support plate thickness < 3mm (special specifications of thick plates require special customization of the equipment) 10 Processing speed 2.0m/min ~ 5.0m/min 11 Cooling method Air cooling, factory exhaust > 400m3/h 12 Control system PLC+HMI
Radio-Frequency Plasma System AS-V100 Merits: Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Application fields: Suitable for PCBs,FPC IC substrates, LCDs, PV batteries, semiconductors, PTFE, automotive interior parts, medical equipment, plastic and rubber products. Product Specifications: 1.Outline Dimensions (footprint):1200*800*1750H mm 2.Vacuum chamber size:450*450*610mm 3.Power frequency:13.56MHz 4.Power supply:1Kw 5.Electrode plate specifications: Non-standard customization 6.Software control: PLC touch screen 7.Gas purity requirement: Industrial grade gas or better 8.Loadable gas:O2 N2 Ar Features & Performance: 1.User-friendly automatic control interface with a touch screen for easy operation. 2.Unique cavity design ensures excellent cleaning uniformity and high cleaning quality. 3.Utilizes a two-layer structure with 4-6 material boxes per layer, combining chemical reactivity and physical impact for a short cleaning cycle and high efficiency. 4.Plasma cleaning offers high repeatability, strong controllability, high utilization rate, and operates with no pollution and low operating costs. 5.Features a simple structure, compact footprint, high efficiency, easy operation and maintenance, fast speed, and stable performance. 6.Enhances the surface wetting ability of the lead frame or substrate before D/A, ensuring precision and firmness in subsequent processes.
Product Introduction Rotogravure cylinder making Auto electroplating production line is improved on the basis of the traditional engravure cylinder making plating line. Which has high working efficiency and convenient maintenance. Product Advantage A. Scientific design, reasonable structure. Printing cylinder making production Electroplating Line combines the designer's more than ten years of design and use experience.so that the cylinder making production line fully reflects the company's product concept of Economic, efficient, practical in the design and structure. B. Machine Material Selection. Engravure cylinder electroplating tank is made of TA2 material with a long life and no leakage. Electroplating equipment Anode uses two forms of hanging and rotating column. Rotogravure cylinder plating liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage. C. Gravure cylinder full automatic electroplating production line electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life. The Rotogravure cylinder making equipment operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
Beer fermentation tank is made by high quality stainless steel 304, the shell is cylindrical, it has big conical angle on the bottom , usually up to 60-75, in order to drain out and recycle yeast. Beer fermenter is kind pressurized tank with working pressure 0.1MPA-0.15MPA, and fitted with pressure controlling and display settings, such as vacuum pressure relief valve, CO2 discharging pipe. Internal welds grounded and remove burs, finish polished less than 0.4um, easy to clean and no sanitary dead angle. Prettech brewery tanks are heavy-duty made with high quality, the cutting and welding processing is made by laser machines, particularly for dimple jackets, it has a 0.35MPA working pressure supporting, the jacket covers on cylinder and conical,enough cooling area and high efficiency for beer chilling. All Prettech fermenters are tested by leakage proof before delivery, fittings are strong, durable and sealed well, you will feel very happy and comfortable to use Prettech brewery tanks, make nice beer. Technical Parameters: Material:SS304 Finish: Exterior brushed, interior polished
Description The three comprehensive vibration test chamber is an instrument and equipment that simulates high temperature, low temperature, high and low temperature cycle, constant wet heat and alternating wet heat test, and can realize the comprehensive test of three factors of temperature, humidity and vibration after connecting with the shaking table. It is generally suitable for aerospace, aviation, petroleum, chemical, electronics, communications and other scientific research and production units to test the adaptability of products and materials to the temperature, humidity and vibration composite environment changes during transportation and actual use, exposing the defects of products, and is an essential and important test means for the whole process of new product development, prototype test and product qualification test. Feature Temperature and humidity vibration chamber, laboratory and refrigeration system as one of the combined structure, compact and beautiful, the console is set separately, easy to operate. High quality French imported Taikang compressor, higher efficiency, stable and reliable. Test temperature -70 to 150. Test humidity from 20%RH to 98%RH Latest eco-friendly refrigerant (R404a/R23) Ceramic stainless steel tungsten wire electric heaters have a longer life and higher thermal efficiency. Equipped with RS232 communication interface. Imported LCD color LCD touch screen, temperature and humidity program automatic control. Protection features include studio overtemperature, compressor overload, overpressure, oil pressure overpressure, fan overload, phase loss, compressor delay, etc. From time to time, several users choose safety protection features, such as low wind speed, door not closed tightly, etc. Different types of shaker can be selected according to user requirements to ensure cold, hot and steam sealing, and the shaker has good mechanical transmission characteristic