Product Name: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% Chemical Formula: C18H30SO3 CAS Number: 27176-87-0 Description: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% is a high-quality anionic surfactant primarily used in the formulation of detergents and cleaning products. It is derived from linear alkylbenzene, ensuring excellent performance in various applications due to its strong detergency, emulsification, and foaming properties. Appearance: LABSA 90% typically appears as a dark brown, viscous liquid. It has a pungent odor and is soluble in water, forming a stable solution. Key Features: High Detergency: Efficiently removes dirt, grease, and stains from surfaces. Excellent Foaming: Generates rich and stable foam, enhancing cleaning efficiency. Good Emulsifying Properties: Helps in the dispersion of oils and fats. Versatile: Suitable for a wide range of cleaning and detergent formulations. Cost-Effective: Provides high performance at a reasonable cost. Applications: Household Cleaning Products: Laundry Detergents Dishwashing Liquids All-purpose Cleaners Industrial Cleaners: Engine Degreasers Heavy-duty Detergents Industrial Floor Cleaners Personal Care Products: Shampoos Hand Washes Technical Specifications: Active Matter: 90% min Color (Klett): 50 Free Oil: 2.0% Sulfuric Acid: 1.5% Water Content: 1.0% Packaging: LABSA 90% is available in various packaging options to suit customer requirements: 220 kg HDPE Drums Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Name: Sodium Lauryl Ether Sulfate (SLES) 70% Chemical Formula: CH3(CH2)11(OCH2CH2)nOSO3Na CAS Number: 68585342 Description: Sodium Lauryl Ether Sulfate (SLES) 70% is a versatile and widely used anionic surfactant in the detergent and personal care industries. It is produced by ethoxylation of dodecyl alcohol and subsequent sulfation to create a high-performance cleaning agent with excellent foaming, emulsifying, and solubilizing properties. SLES 70% is known for its mildness and effectiveness across various applications. Appearance: SLES 70% is typically supplied as a thick, viscous, and colorless to pale yellow liquid with a characteristic odor. Key Features: Superior Foaming: Produces abundant and stable foam, enhancing cleaning efficacy. Effective Detergency: Removes dirt, oils, and grease from surfaces effectively. Emulsifying Agent: Assists in the dispersion and stabilization of oils and other substances in water-based formulations. Mildness: Relatively gentle on skin and suitable for use in personal care products. Versatility: Widely used in shampoos, body washes, dishwashing liquids, and other cleaning formulations. Applications: Personal Care Products: Shampoos Body Washes Facial Cleansers Hand Soaps Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Applications: Industrial Cleaners Vehicle Wash Solutions Technical Specifications: Active Matter: 70% min Sodium Sulfate Content: 1.5% max Unsulfated Matter: 2.0% max pH (1% aqueous solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 20 Hazen Packaging: SLES 70% is available in various packaging options to suit customer needs: 220 kg HDPE Drums 1100 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight and heat sources. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH regulations and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Name: Sodium Lauryl Ether Sulfate (SLES) 28% Chemical Formula: CH3(CH2)11(OCH2CH2)nOSO3Na CAS Number: 9004824 Description: Sodium Lauryl Ether Sulfate (SLES) 28% is a high-quality surfactant widely used in personal care and cleaning products. It is derived from natural fatty alcohols and exhibits excellent detergency, emulsifying, and foaming properties, making it a versatile ingredient in various formulations. Appearance: SLES 28% typically appears as a clear to slightly yellowish viscous liquid. It has a mild, pleasant odor, which makes it suitable for use in products requiring minimal fragrance interference. Key Features: High Foaming Ability: Produces rich and stable foam, even in hard water conditions. Excellent Detergency: Effectively removes dirt, oil, and impurities from surfaces. Good Emulsifying Properties: Helps in the formation of stable emulsions, enhancing product consistency. Mild to Skin: Less irritating compared to other surfactants, suitable for personal care products. Biodegradable: Environmentally friendly and safe for use in eco-conscious formulations. Applications: Personal Care Products: Shampoos Body Washes Liquid Hand Soaps Facial Cleansers Toothpastes Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Engine Degreasers Car Wash Solutions Technical Specifications: Active Matter: 28% min pH (1% solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 20 Hazen Sodium Sulfate: 1.5% Unsulfated Matter: 1.5% Packaging: SLES 28% is available in various packaging options to suit customer requirements: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, EINECS, and other international regulations. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner layer W/S: 5/4mil Thickness: 1.6mm Min. hole diameter: 0.2mm Special process: half hole Advantages Of 8 Layer ENIG Half Hole Custom Made PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. We can provide kinds of custom made pcb boards for sale, and the cost of custom pcb is affordable, if you want to buy custom pcb, please leave us a message. As a pcb factory, we will do our best to meet all the needs of customers. More types of pcb board, please visit our website.
Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner layer W: 21mil Thickness: 0.4mm Min. hole diameter: 0.2mm Special process: impedance control+half hole Advantages Of 4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. As a 4 layer pcb manufacturer, we can provide kinds of 4 layer pcb fabrication for sale, if you want to buy 4 layer pcb, please contact us. As a pcb company, we will do our best to meet all the needs of customers. More types of pcb board, please visit our website.
Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner layer W/S: 6/4mil Thickness: 0.8mm Min. hole diameter: 0.28mm Special process: impedance control+half hole Advantages Of 4 Layer ENIG Impedance Control Half Hole Fr4 PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. Now the 4 layer pcb cost is reasonable, if you want to buy cheap 4 layer pcb, please contact us. As a pcb supplier, we can provide different types of pcb board for sale, if you are interested, please leave us a message.
Number of layers: 2 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 7/4mil Thickness: 1.0mm Min. hole diameter: 0.3mm Special process: impedance control+half hole Advantages Of 2 Layer ENIG Impedance Control Half Hole Printed Circuit Board Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility is environmental-friendly approved by the government . Famous raw materials brand, Kingboard, Shengyi, ITEQ, Taiyo, Guangxin. Highly automated production line with AIO Optical Scanning, Electroplating Automatic Line, High-speed flying probe test machines and inkjet printer. Engineers with more than 15 years of experience Customers located in more than 20 countries, the common choice of 500 high-end companies. Perfect quality inspection system Professional R&D team can make all kinds of special boards. Sales office in Shenzhen and own 12,000sqm factory in Jiangxi. Establish an e-commerce system to reduce transaction costs and increase market response speed. As a 2 layer pcb manufacturer, we can provide kinds of double layer pcb china for sale, and the 2 layer pcb price is reasonable, if you have needs, please contact us. As a pcb builder, we will do our best to meet all the needs of customers.
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives Specifications for Gasoil D2 L-0.02/62 / GOST 305-82 COMPONENT UNIT MIN MAX Density at 20C Kg / m�³ 0.870 Colour 2.0 Flash point, PMCC Deg C (�°C) 57 62 Kinematic viscosity at 20C C ST 3.0 6.0 Pour point Deg C (�°C) (*) -10.0 Cloud point Deg C (�°C) (*) -5.0 Mercaptan sulphur 0.01 Acidity, mg / 1000 cm�³ 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.02 0.05 Copper corrosion 3hrsat50 deg C (typical) 1 A CCR on 10% Residues %wt 0.02 Cetane index 45 Distillation range : - 50% Recovered Volume deg C (�°C) 280 - 90% Recovered Volume deg C (�°C 360 Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)
Unsweetened Desiccated Coconut. PHYSICAL CHARACTERISTICS: Appereaance and Color : White, free from yellow specs or other discolorations. Flavour/Odour : Mild and sweet characteristic of coconut, free foreign flavours and odours. Size : Fine granular of coconut. Impurities : Not more than 4 dark specs per 100 grams. Granulation mesh 7 : 0% mesh 14 : 5 - 23 %. mesh 18 : 30 - 55 %. pan : 33 - 65 %. CHEMICAL CHARACTERISTICS: MOISTURE : 3.0 % maximum TOTAL FAT : 50 + 5 % (d.w.b) FREE FATTY ACID : 0.10 % maximum (as lauric acid) pH (10% dispersion) : Min 6.0 HEAVY METAL: Pb : 0.1 mg/kg maximum Cd : 0.1 mg/kg maximum Hg : 0.03 mg/kg maximum As : 0.1 mg/kg maximum MICROBIOLOGICAL: Standard Plate Count : 5.000 cfu/gram maximum. Yeast : 50 cfu/gram maximum. Mould : 50 cfu/gram maximum. Caliform : 100 MPN/gram maximum. E. Coli (Type 1) : Negative/1 gram. Salmonella : Negative/25 gram. Staphylococcus aureus : 10 cfu/gram maximum. PACKAGING: Standard Packing 25 Kgs nett weight in multiwall kraft paper bag with inner polyliner, weight 24,88 - 25,13 Kg. Each delivery identified by marking the grade of DC, Lot Number, Production Code, Self Life, Handling, and Supplier.
Product Name: Acai Powder Product Code: WH1001 Description: The acai berry is the fruit of the acai palm (Euterpe oleracea), native to the amazon, and has been consumed for centuries in popular recipes in the north of Brazil. This super fruit of purple color and remarkable flavor is rich in anthocyanins(a natural constituent with antioxidant activity), amino acids, essential fatty acids, fibers, proteins, and minerals (mainly calcium and potassium). This dehydrated ingredient is obtained from selected acai juice, and dried by atomization(Spray Dryer). Common Uses and Orientative Dosage: Food supplement 500.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Bordeaux Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Moisture Max. 5.00 g/100g Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Particle Size 0.42mm(40 mesh) Max. 5.00 g/100g Total Polyphenols Min. 0.30 g/100g CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Negative/g Escherichia Coli Negative/25g Yeasts and Molds Max. 1.000.000 UFC/g Salmonella Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Mimaki JV33 / JV5 Print Head - M007947 - 1440 dpi - 8 kHz Mimaki JV33 / JV5 Print Head with memory board - M007947 This original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent CJV / JV printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi This generation of printheads allows fast speed, high resolution printing with eco-solvent and mild solvent inks. The original and complete Mimaki JV33/JV5 printhead is delivered with the Head ID and the Head Memory Board. Mimaki part number for this print head is M007947. Product Specifications : Technology: Micro-Piezo Native resolution: 1440 dpi Min. Droplet Size: 1.5 pico litre Max. Droplet Size: 21 pico litre Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) Firing Frequency: 8 kHz Ink Compatibility: eco-solvent and mild solvent Printer compatibility : Mimaki CJV30-100 Mimaki CJV30-100BS Mimaki CJV30-130 Mimaki CJV30-130BS Mimaki CJV30-160 Mimaki CJV30-160BS Mimaki CJV30-60 Mimaki CJV30-60BS Mimaki JV33-130 Mimaki JV33-130BS Mimaki JV33-160 Mimaki JV33-160BS Mimaki JV33-260 Mimaki JV33-260BS Mimaki JV5-130S Mimaki JV5-160S Mimaki JV5-260S Mimaki JV5-320DS Mimaki JV5-320S Mimaki TPC-1000 Mimaki TS3-1600 Mimaki TS5-1600AMF
DX5 printhead unlocked is various Chinese solvent printers use the Epson DX5 solvent printhead. Allows fast speed, high-resolution printing with eco-solvent or mild solvent inks. The Epson DX5 original printhead is delivered in a sealed Epson package. This DX5 printhead model is compatible with all DX5 based Chinese printers and doesnâ??t require any decoder. This is the original Epson DX5 printhead; it is not modified nor coded. This printhead should not be used on Mutoh Valuejet or Mimaki JV33 / JV5 printers as it has different voltages and therefore offers a different image quality. PPHMUVJ1204 and PPHMIJV5006 should be used on Mutoh and Mimaki printers. Product Specifications Technology: Micro-Piezo Native resolution: 1440 dpi Min. droplet size: 1.5 picolitre Max. droplet size: 21 picolitre Tot. amount of nozzles: 1440 (8 lines x 180 nozzles) Firing frequency: 8 kHz Ink compatibility: solvent and Eco-solvent based It is highly recommended to replace the head cables together with a new printhead. COMPATIBLE PRINTERS : Epson R2000 Allsign AS1802S AS3202S E6184 Britomatics KingFisher 1802/3202 FalconPro 1801/ 1802 Galaxy A1801S A1802S BY-1801B UD-1612LC UD-1612W UD-161LC UD-161W UD-1812LC UD-181LA UD-181LB UD-181LC UD-2112LA UD-2112LC UD-211LA UD-211LC UD-2512LA UD-2512LC UD-251LA UD-251LC MeiTu MT-E1802S MT-Starjet 5.0 PrismaJet GE 1802 DS GE 1802 DSII GE 1802 S GE 1802 SII Rodin 1804 Smart Color FT1800 Sunfiner X4740ASE Taimes X2A-7405SE WER ES160 ES1802 ES2502 ES3202 ES3202I Wit-Color Ultra 9000 Ultra 9100 Xunfei ME1300 ME1600 ME900 VE1800 VE2600 Zhongye DTG
Gypsum Board Manufacturing Plant Wuxing Providing turnkey gypsum board solutions from plant design to completion. With talented engineers and state-of-the-art equipment, we can help you build your Annual Output 20million (12.5mm) Square Meters gypsum board manufacturing plant. As a professional building materials equipment manufacturer, Wuxing is committed to providing customers with high-quality, economical, energy-saving and environmentally friendly equipment systems and plant construction solutions. At present, we have successfully helped customers in many countries to build several gypsum board production lines, and our products and services have been widely praised by customers. Translated with DeepL.com (free version) Main technical indicators:( based on the board of thickness 12.5mm) 1. Processing speed:40M/min 2. Annual working days 300, 24 hours continue producing 3. Product specification: Length 2000-3000MM Width 1200-1220MM Thickness 7-15MM 4. Power requirement: Three phrase AC420V, 50Hz One phrase AC220V,50Hz This production line is a fully mechanized production line with a total installed capacity of about 1500 KW. 5. Fuel requirement: natural gas, diesel, coal 6. Workshop requirements: 340M length * 50M,had better more than that. 7. Automation degree: operation system adopts PLC program control,fully automated production process, forming - sealing head and stack.
Model 4V222TIL Engine type 4 valve, 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1200(883)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 14.3 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 239 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 103 / 92 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,874 x 1,243 x 1,548 Engine dry weight (KG) 1,960
Model 4V222TIM Engine type 4 valve, 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 880(647)/2,100 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 14.3 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 160 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 103 / 92 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,874 x 1,243 x 1,548 Engine dry weight (KG) 1,920
Model 4L126TIL Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 545(401)/2,200 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 11.4 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 114 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 400(294)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.85 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 77 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
Model L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 360(265)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 67 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
